Beli Kraussmaffei Km 250-1400 C1 bekas (22.343)

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Gjdpfsuiykdex Aiyjit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 54.872 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, volume langkah: 570 cm³, tekanan injeksi: 2.387 batang, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, de001 Godeyv Elwspfx Aiyoit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Injection Moulding Machine Krauss Maffei KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Max opening width: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Gjdpexak Ucsfx Aiyoit Net weight (including control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight (PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Gjdpew A N Hfofx Aiyoit Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface compliant with Euromap 67 Additional information: Machine located in Poland Ready for collection Possibility to arrange loading, transport, installation, and commissioning

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 66.160 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, volume langkah: 679 cm³, Clamping force 3000 kN Maximum tool opening force 160 kN Moving platen opening force 86 kN Moving platen closing force 68 kN Mounting platen (H x V) 995 x 1050 mm Clear width (H x V) 630 x 630 mm Mold opening stroke 820 mm Minimum mold installation height 330 mm Opening width: 1150 mm Ejector stroke 200 mm Ejector force forward/backward 58 kN Injection unit: Screw diameter 60 mm L/D ratio 21 Injection pressure 2000 bar Shot volume 679 ccm Shot weight (PS) 618 g Injection flow rate 325 ccm/s Screw speed 259 rpm Plasticizing rate 58 g/s Nozzle contact force 110 kN Electrohydraulic equipment: Nominal power of pump motor 45 kW Installed heating power 23 kW Temperature control zones for barrel heating 6 Oil capacity 720 liters Dimensions and weights: Space requirement approx. 6.20 x 2.20 x 2.40 m Total weight 12500 kg Maximum mold weight 3430 kg Accessories: - Oscillation elements - 10-fold water manifold Additional equipment: - 1 x air valve Giedpfxey Nk Uqj Aiyot - 3 x core pulls - 3 x hot runner controllers - Robot interface compliant with Euromap 67

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 44731, gaya penjepit: 500 kN, diameter sekrup: 25 mm, jarak antara tiang: 320 mm, berat injeksi: 47 g, tinggi cetakan (min.): 200 mm, langkah pembukaan: 550 mm, panjang total: 4.000 mm, lebar total: 1.163 mm, tinggi total: 1.787 mm, berat keseluruhan: 2.300 kg, frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 58 A, Please refer to the pictures and video for the condition and contents of the offer. The system is currently dismantled. Giodex Srggopfx Aiyst The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Please visit our website to view our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications as well as errors in the item description may occur and are reserved.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 ccm Clamping unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Controller with 16 hot runner zones Injection unit hardened – bimetallic Energy-efficient machine – features a system with 3 variable output hydraulic pumps Godpfsy Dqiwex Aiyjit Parallel movements Proportional valve on the injection unit – for precise injection Additional oil cleaning pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C Touch panel controller Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50x2.20x2.30 m All machines offered are put into operation by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2,007 bar Metering volume: 679 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 interface Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull units x 3 Air core pull units x 3 Hot runner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Giedpfxey Dqiqs Aiyet Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt subject to surcharge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 57.830 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, 01 Gijdpey Nk Taofx Aiyet

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly Gsdpfexqhuusx Aiyoit - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 78.454 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, jarak antara tiang: 630 mm, volume langkah: 678 cm³, tekanan injeksi: 2.007 batang, tinggi pemasangan: 330 mm, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, d85a8603 Gisdpeyxmz Esfx Aiyst

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.470 kN, diameter sekrup: 50 mm, tekanan injeksi: 2.000 batang, langkah pembukaan: 500 mm, berat keseluruhan: 7.000 kg, Ditawarkan mesin injeksi Krauss Maffei KM 150-1000 C1, tahun 1997, dilengkapi dengan robot cartesiano WITTMANN W711 untuk pengambilan produk secara otomatis. Data utama: Gaya penutup: 150 ton (≈1470 kN) Gedpfoyn Ilvsx Aiyjit Model: KM 150-1000 C1 Tahun pembuatan: 1997 Termasuk robot WITTMANN W711 terintegrasi Mesin ini dikonfigurasikan untuk produksi industri dan dilengkapi dengan sistem penanganan otomatis melalui robot WITTMANN W711, ideal untuk proses dengan pengambilan otomatis dan pengurangan waktu siklus. Cocok untuk produksi komponen teknis berukuran sedang dari PP, PE, ABS atau termoplastik umum lainnya. Tersedia untuk inspeksi di Albacete (Spanyol). Informasi teknis tambahan dan video operasi dapat diberikan atas permintaan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, KraussMaffei KM 200-1400 CX Tahun produksi: 2001 Kontrol: MC4 Jam operasi: sekitar 16.700 jam (pompa) Diameter ulir: 70 mm Berat injeksi: sekitar 841 gr./PS Gsdpfjyyd Sqox Aiyeit Jarak antara tie bar: 560 x 560 mm Berat mesin: 10.500 kg Fitur tambahan: Core pull Antarmuka handling Mesin tersedia! Perubahan, penjualan interim, dan kesalahan dapat terjadi!

Tahun pembuatan: 2008, jam operasional: 3.200 h, Kondisi: siap digunakan (bekas), diameter sekrup: 60 mm, el Gjdpeyaizvjfx Aiyeit

Kondisi: siap digunakan (bekas), Mesin bekas Mesin injeksi plastik Gjdpfxeu Ti Sro Aiyoit Produsen: Krauss Maffei Tipe: KM 80 C1 Tahun pembuatan: 2000 Hanya tersisa 1 unit di stok Tanpa waktu pengiriman, siap kirim segera Kunjungan dapat dilakukan dengan janji terlebih dahulu Mesin tidak lagi terhubung ke listrik / Tanpa sambungan air pendingin Mesin disimpan secara profesional Data teknis: Gaya penutup: 800 kN Pelat pemasangan (mm): 610×610 Jarak antar tie-bar (mm): Tinggi pemasangan cetakan (mm): 250 Jarak pelat (mm): 750 Kontrol: MC4 Bahasa tampilan layar: Jerman (tidak dapat diubah) Diameter sekrup unit injeksi (mm): 45 Tekanan injeksi (bar): 1878 Volume langkah (cm³): 275 Daya penggerak pompa (kW): 18,5 Daya pemanas (kW): 13 Isi oli (l): 270 Dimensi (m): 4,3 x 1,4 x 2,1 Bobot total: 3,2 ton Foto tambahan atas permintaan.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1 • Year of manufacture: 1999 Technical Data Clamping Unit • Clamping force: 4200 kN • Max. mould opening force: 250 kN • Movable platen force (opening): 124 kN • Movable platen force (closing): 102 kN • Mould platen dimensions (W x H): 1270 mm x 1200 mm • Tie bar spacing (W x H): 800 mm x 800 mm • Mould opening stroke: 1020 mm • Minimum mould height: 380 mm • Max. daylight: 1400 mm • Ejector force (forward/backward): 95 / 48 kN Injection Unit • Screw diameter: 80 mm Giedpfxjwqd Aqo Aiyst • L/D ratio: 20 • Injection pressure: 1829 bar • Shot volume: 1433 cm³ • Shot weight (PS): 1304 g • Injection rate: 513 cm³/s • Max. plasticising capacity: 108 g/s • Nozzle contact force: 173 kN Electrical and Hydraulic System • Pump motor power: 75 kW • Installed heating power: 36 kW • Number of barrel heating zones: 7 • Oil tank capacity: 1075 l Dimensions and Weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping unit. MC 6 control system based on an industrial computer operating in real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a colour touch screen. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle opening: 6 mm Technical specifications (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Godpfexdd Spox Aiyoit Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, KRAUSS MAFFEI KM 300-1900 C1 INJECTION MOULDING MACHINE Year of manufacture: 2007 Includes: Wittmann W 731 robot General Description We offer a used injection moulding machine from the renowned Krauss Maffei brand, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system, as well as a modern MC4 control system with a color monitor, integrated operator panel, and floppy disk drive. Plasticising Unit Complete plasticising unit for thermoplastics, wear-resistant version, equipped with a 60 mm diameter screw, check valve, and open nozzle. Technical Specifications Clamping Unit Clamping force: 3000 kN Mould opening force: 160 kN Movable platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2420 bar Shot volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Giedpfew Du Htex Aiyot Injection rate: 294 cm³/s Plasticising rate: – Standard speed: 55 g/s – Increased speed: 78 g/s Electro-hydraulic System Pump motor power: 55 kW Heater power: 30 kW Number of cylinder heating zones: 6 Dry cycles (Euromap): 1350 cycles/h Oil tank capacity: 720 l Dimensions & Weight Net weight with control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 Gedpfx Aijuggb Dsyoit INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 504212, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, jarak antara tiang: 900 mm, tekanan injeksi: 1.742 batang, tinggi pemasangan: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gedpfxsw Dy Rwo Aiysit Clamping Unit Clamping force: 5,000 kN Distance between tie bars (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (retraction): 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total nominal current (Iₙ): 306 A Motor nominal current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery as well as assembly and commissioning can be arranged at extra cost upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, gaya penjepit: 2.500 kN, Perlengkapan: dokumentasi / manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar spacing: 630 x 630 mm Shot weight: 471 g (PS) Shot volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min./max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data Gjdpfx Asxqhfysiyjit 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Machine equipment:_ 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× on operator side + pressure relief system 3. 8-circuit water manifold with solenoid valve shut-off 4. 4-zone hot runner control (ZE 88.5404) 5. MC6 control with 19″ touch TFT screen 6. PV control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving BluePower servo drive system LRX 150 linear robot (payload &lt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year of manufacture 2004, with only approx. 45,000 operating hours in automatic mode. The machine is delivered overhauled. OVERHAULED MACHINE Equipment: - 6 pneumatic cascades - 24 hot runner zones - 1 core puller on the fixed platen and 1 core puller on the moving platen - Electric screw drive Technical details: CLAMPING FORCE: 6,500 kN PLATEN SIZE: 1,540 x 1,440 mm DAYLIGHT: 1,110 x 960 mm MOULD OPENING STROKE: 1,150 mm MAX. OPENING DISTANCE: 1,750 mm Gijdpfx Ajhy Nnboiyjt SCREW DIAMETER: 90 mm MIN. MOULD HEIGHT: 600 mm YEAR OF MANUFACTURE: 2004 SHOT VOLUME: 1,953 cm³ SHOT WEIGHT: 1,777 g INJECTION PRESSURE: 1,742 bar

Kondisi: baik (bekas), Tahun pembuatan: 1997, jam operasional: 92.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, berat keseluruhan: 6.300 kg, Krauss Maffei KM125-520 C1 injection moulding machine for sale. Includes SEPRO robot. Equipped with shut-off nozzle and Stäubli quick-clamping system. Clamping unit: Clamping force: 1,250 kN Max. mould opening force: 70 kN Travel force, moving platen open: 35 kN Travel force, moving platen close: 28 kN Mounting platen (H x V): 745 x 770 mm Clear space (H x V): 470 x 470 mm Mould opening stroke: 600 mm Minimum mould installation height: 300 mm Opening width: 900 mm Ejector stroke: 150 mm Ejector force, forward/back: 22/10 kN Injection unit: Screw diameter: 40 mm L/D ratio: 23 Injection pressure: 2377 bar Stroke volume: 217 cc Shot weight (PS): 198 g Injection flow rate: 126 cc/s Screw speed: 307 rpm Electrohydraulic equipment: Pump motor rated power: 18.5 kW Installed heating capacity: 13 kW Cylinder heater control zones: 5 Oil fill: 345 l Gedpfx Aiow Hyd Nsyjit Dimensions and weight: Installation space approx. 4.50 x 1.60 x 2.20 m Total weight approx. 6,000 kg Max. mould weight: 1,485 kg If you have any further questions, please feel free to contact us at any time.

Kondisi: baik (bekas), Tahun pembuatan: 1995, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 40 mm, jarak antara tiang: 470 mm, Mesin injeksi Krauss Maffei tipe KM110-390 C1 untuk dijual. Mesin dalam kondisi sangat bersih, karena digunakan untuk produksi produk medis (lihat ruang bersih di foto). Perawatan dilakukan oleh Krauss Maffei hingga akhir. Mesin siap digunakan segera dan sudah dibongkar. Muat menggunakan forklift. - Sekitar 60.000 jam operasi - No. seri: 114104 - Tahun pembuatan: 1995 - Sekrup 40mm - Gaya penutupan 1100 kN - Jarak batang 470x470 mm - Koneksi core pull: 1 - Dimensi 4,5x1,5x2,2 meter Giedoxbar Hopfx Aiyot - Berat 5.800 kg Silakan hubungi kapan saja jika ada pertanyaan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, diameter sekrup: 40 mm, volume langkah: 217 cm³, tekanan injeksi: 2.377 batang, lintasan ejektor: 150 mm, langkah pembukaan: 600 mm, panjang total: 4.480 mm, lebar total: 1.510 mm, tinggi total: 2.190 mm, berat keseluruhan: 6.000 kg, daya: 18,5 kW (25,15 hp), Perlengkapan: dokumentasi / manual, Dalam kondisi sempurna. Gsdswlhb Tjpfx Aiysit