Beli Kraussmaffei Km 300 - 1400 C2 bekas (24.225)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 58.350 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, Clamping unit: Clamping force: 3000 kN Max. mold opening force: 160 kN Movable platen opening force: 86 kN Movable platen closing force: 68 kN Clamping platen (H x V): 995 x 1050 mm Clear space (H x V): 630 x 630 mm Mold opening stroke: 820 mm Min. mold installation height: 330 mm Max. opening width: 1150 mm Ejector stroke: 200 mm Ejector force forward/back: 58 kN Injection unit: Screw diameter: 60 mm L/D ratio: 21 Injection pressure: 2000 bar Stroke volume: 679 ccm Shot weight (PS): 618 g Injection flow rate: 325 ccm/s Bdsdpfx Aow H Rviolasb Screw speed: 259 rpm Plasticizing rate: 58 g/s Nozzle contact force: 110 kN Electrohydraulic equipment: Rated pump motor power: 45 kW Installed heating capacity: 23 kW Cylinder heating control zones: 6 Oil capacity: 720 l Dimensions and weights: Space requirement approx.: 6.20 x 2.20 x 2.40 m Total weight: 14,370 kg Max. mold weight: 3,430 kg Accessories: - Oscillation elements - 8-circuit water manifold Additional equipment: - 1 x air valve - 2 x core pulls - 8 x hot runner control zones - Robot interface according to Euromap 12

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 78.454 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, jarak antara tiang: 630 mm, volume langkah: 678 cm³, tekanan injeksi: 2.007 batang, tinggi pemasangan: 330 mm, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, d85a8603 Bdodpfjyxmz Eex Alaob

Kondisi: baik (bekas), gaya penjepit: 3.000 kN, Produsen: KraussMaffei Model: KM 300-1400 C2 Jenis mesin: Mesin cetak injeksi hidrolik Bdsdpsytnnzsfx Alasb Tahun pembuatan: 1999 Gaya penutupan: 3000 kN Penandaan ukuran internasional: KM 1400 C2 / 300 Berat mesin: 12.500 kg Penandaan CE: tersedia Tersedia 2 unit Informasi lebih lanjut tersedia berdasarkan permintaan.

Kondisi: bekas, Tahun pembuatan: 1998, Krauss Maffei injection moulding machine KM 300 1400 C1, year of manufacture 1998 Control system: Mc 3 Clamping force: 3,000 kN Shot weight: 900 g Core pull: 2 Bodpfx Alsw D Hglsasdb Screw diameter: 60 and 70 mm Operating hours: approx. 18,000 h

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping unit. MC 6 control system based on an industrial computer operating in real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a colour touch screen. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle opening: 6 mm Technical specifications (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Bdjdpfx Alexdd Spsasb Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2,007 bar Metering volume: 679 cc Clamping unit: Bdsdpfx Aloy Dqiqeaeb Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 interface Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull units x 3 Air core pull units x 3 Hot runner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt subject to surcharge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, We are pleased to offer a very well-maintained, continuously serviced injection moulding machine. We are also happy to accept well-kept machines from year of manufacture 2010 onwards as trade-ins. Please offer us your available machines. Comprehensive maintenance by the manufacturer up to present. Injection Moulding Machine Krauss Maffei KM65-160 C2 Injection Moulding Machine: Manufacturer / Model: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 Complete annual maintenance by the manufacturer Clamping Unit: Clamping force: 650 kN / 65 tons Tie bar distance: 405 x 405 mm Min. mould installation height: 250 mm Max. platen opening: 750 mm Bedpsh Dp R Ejfx Alaedb Standard mounting platens: 610 x 610 mm Ejector stroke: 150 mm Core pull: 1 unit Injection Unit Injection unit size / cylinder diameter: 160 / Cylinder ø25 mm and cylinder ø18 mm Max. shot weight (ø25): 47 g/PS Injection flow rate: 63 cm³/sec Specific injection pressure: max. 2500 bar Handling interface: Euromap 12 Dosing interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil capacity: 270 L Location: Hanover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown is NOT included in the offer! The machine is immediately available from our warehouse. Loaded free on truck of the buyer or delivered free to location with reimbursement of freight costs. For information about the machines we offer and our company: - We only sell machines purchased out of ongoing production from our own stock in Hanover. - All offered machines are inspected and tested before dismantling. - We do NOT sell insolvency equipment – we are NOT brokers dealing in third-party property. - All machines offered come from successful companies where maintenance and care are a matter of course. - All machines offered are available for viewing in our warehouse.

Kondisi: baik (bekas), Tahun pembuatan: 2004, gaya penjepit: 1.250 kN, diameter sekrup: 45 mm, jarak antara tiang: 470 mm, volume langkah: 275 cm³, tekanan injeksi: 1.878 batang, berat injeksi: 250 g, tinggi cetakan (min.): 300 mm, Krauss Maffei 125-520 C2 Bdsdpfxeyxl Dlo Alaeb Informasi umum Model: 125-520 C2 Tahun produksi: 2004 Kontrol: MC4 Berat mesin: 6.000 kg Dimensi (P × L × T): 4,5 × 1,5 × 2,2 m Sistem penutupan Gaya penutupan: 125 t Sistem penutupan cetakan: 125 / … Ukuran pelat cetakan: 745 × 770 mm Jarak antar kolom: 470 × 470 mm Jarak buka: 600 mm Jarak maksimum antar pelat: 900 mm Tinggi cetakan: 300 mm Gaya ejektor: 22 kN Stroke ejektor: 150 mm Sistem injeksi Unit injeksi: … / 520 Diameter screw: 45 mm Rasio L/D screw: 20 Volume injeksi: 275 ccm Berat injeksi: 250 g Tekanan spesifik injeksi: 1.878 bar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 59.000 h, gaya penjepit: 4.200 kN, diameter sekrup: 60 mm, volume langkah: 769 cm³, tekanan injeksi: 2.200 batang, panjang total: 6.830 mm, lebar total: 2.330 mm, tinggi total: 2.480 mm, berat keseluruhan: 23.090 kg, Gaya penutupan: 4200 kN Dimensi tiang h x v: 800 x 800 mm Ukuran pelat h x v: 1270 x 1200 mm Tinggi pemasangan min.: 580 mm Jarak pelat maks.: 1300 mm Jalan buka: 720 mm Bdsdpfx Aljyv E Dasasb Diameter screw: 60 mm Volume langkah: 769 ccm Tekanan injeksi: 2200 bar Perlengkapan Teks layar dalam bahasa Jerman Tarikan inti hidraulik 4x Mesin tanpa sistem penanganan Mesin tanpa corong material Elemen perata Pemanas cetakan 12x Dimensi mesin PxLxT: 6,83 m x 2,33 m x 2,48 m Berat total: 23090 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 54.872 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, volume langkah: 570 cm³, tekanan injeksi: 2.387 batang, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, de001 Bedpeyv Elwofx Alajdb

Kondisi: baik (bekas), Tahun pembuatan: 1999, gaya penjepit: 2.000 kN, Produsen: KraussMaffei Kunststofftechnik München Model: KM 200-700 C2 No. Mesin: 174406 Tipe Ukuran Internasional: 700 C2 / 200 Tahun Pembuatan: 1999 Gaya Penutupan: 2000 kN Gaya Penutupan: 200 t Ukuran Unit Injeksi: 700 Berat Mesin: 8800 kg Bodpfxjytiqwe Alasdb Lokasi: Freiburg

Kondisi: baik (bekas), Tahun pembuatan: 2002, gaya penjepit: 1.100 kN, Produsen: KraussMaffei Kunststofftechnik München Model: KM 110-390 C2 Nomor Mesin: 1141268 Nomor Pesanan: 646749/1 Tahun Pembuatan: 2002 Gaya Penutupan: 1100 kN Gaya Penutupan: 110 t Penandaan Ukuran Internasional: 390 C2 / 110 Ukuran Satuan Injeksi: 390 Tegangan Operasi: 400 V Fase: 3 Bjdpfx Aljytipajaodb Frekuensi: 50 Hz Arus Total: 164 A Sekering Utama: 200 A Arus Motor: 37 A Berat Mesin: 5800 kg Lokasi: Freiburg

Kondisi: baik (bekas), Tahun pembuatan: 1999, gaya penjepit: 650 kN, Pabrikan: KraussMaffei Kunststofftechnik München Model: KM 65-160 C2 Bedpfxoytik Re Alaodb Gaya penutupan: 650 kN Nomor Mesin: 641070 Nomor Pesanan: 643883/1 Tahun Pembuatan: 1999 Penunjukan Ukuran Internasional: 160 C2 / 65 Tegangan Operasi: 400 V Fase: 3 Frekuensi: 50 Hz Arus Total: 153 A Sekering Elco: 160 A Arus Motor Maksimum: 30 A Berat Mesin: 3200 kg Lokasi: Freiburg

Tahun pembuatan: 2008, jam operasional: 3.200 h, Kondisi: siap digunakan (bekas), diameter sekrup: 60 mm, el Bdodpsyaizvofx Alajb

Kondisi: bekas, Tahun pembuatan: 2004, Krauss Maffei KM125-390 C2 (tahun pembuatan 2004) Bdjdpew D Rmiofx Alajb Gaya penjepit: 125 kN Jam operasional: sekitar 63.000 jam Mesin dapat dilihat kapan saja

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Bedpfx Aeuiykdelasdb

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Clamping force: 1500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions (X/Y): 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2336 bar. Machine dimensions (X/Y/Z): approx. 4700 mm / 1550 mm / 2200 mm, weight: approx. 7000 kg, control system: MC4. Includes Sepro handling system. Documentation available. On-site inspection possible. Bodpfxsw Hthze Alajdb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, tekanan injeksi: 2.389 batang, lintasan ejektor: 135 mm, langkah pembukaan: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping platen dimensions (H x V): 1,520 x 1,470 mm Clearance between tie bars (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mould installation height: 675 mm Maximum daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/return: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Footprint approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Bdsdpfx Ajycqc Tslasb Electrohydraulic Equipment Rated pump motor power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls at moving platen 2 x hydraulic core pulls at fixed platen Robot interface according to EUROMAP 67

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Clamping force: 1250 kN Bjdpfx Aljwthfueaodb Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Minimum mold height: 300 mm Total weight: approx. 6,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould installation height: 380 mm Daylight: 1300 mm Bodex Elukopfx Alasdb Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 100 mm, tekanan injeksi: 1.742 batang, tinggi cetakan (min.): 600 mm, langkah pembukaan: 1.150 mm, lebar pelat: 1.440 mm, tinggi pelat: 1.490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mould opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Platen dimensions: 1,490 mm x 1,440 mm Clear distance between tie bars: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection Unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm Bdodpfxowp Si Ns Alasb C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Rated pump motor power: 90 kW Installed heating capacity: 44 kW Number of barrel heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection Krauss Maffei 24.03. New screw drive (hydraulic) 25.01 New non-return valve 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated control panel - Built-in floppy disk drive - Complete plasticising system for thermoplastics with 100 mm screw diameter, non-return valve and open nozzle

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, KRAUSS MAFFEI KM 300-1900 C1 INJECTION MOULDING MACHINE Year of manufacture: 2007 Includes: Wittmann W 731 robot General Description We offer a used injection moulding machine from the renowned Krauss Maffei brand, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system, as well as a modern MC4 control system with a color monitor, integrated operator panel, and floppy disk drive. Plasticising Unit Complete plasticising unit for thermoplastics, wear-resistant version, equipped with a 60 mm diameter screw, check valve, and open nozzle. Technical Specifications Clamping Unit Clamping force: 3000 kN Mould opening force: 160 kN Bdjdow Du Htspfx Alasb Movable platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2420 bar Shot volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Plasticising rate: – Standard speed: 55 g/s – Increased speed: 78 g/s Electro-hydraulic System Pump motor power: 55 kW Heater power: 30 kW Number of cylinder heating zones: 6 Dry cycles (Euromap): 1350 cycles/h Oil tank capacity: 720 l Dimensions & Weight Net weight with control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with color monitor, integrated control panel, and disk drive station Clamping system: Fully hydraulic Plasticizing Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3,000 kN Opening force: 169 kN Mounting plate dimensions (h × v): 995 × 1050 mm Tie-bar clearance: 630 × 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight opening: 1,150 mm Ejector stroke: 200 mm Bdedpfow U Rcdex Alasb Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2,304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticizing capacity (at standard speed): 54.3 g/s Electrical and Hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, en-Wtryskarka Krauss Maffei KM 420-2700 C2 Year of manufacture: 2002 Bjdpfsxq Akkex Alasdb Machine Description The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise unit with a high clamping force of 4,200 kN, designed for processing thermoplastics. Equipped with a reliable hydraulic system and a precise control system, it ensures stable and repeatable operation in demanding production environments. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 4,200 Max. mold opening force kN 250 Movable platen shift force – opening kN 124 Movable platen shift force – closing kN 102 Dimensions of mounting plates (H × L) mm 1,270 × 1,200 Clearance between tie bars (H × L) mm 800 × 800 Mold opening stroke mm 1,020 Minimum mold height mm 380 Maximum daylight mm 1,400 Ejector force (forward / backward) kN 95 / 48 Maximum mold weight kg 6,700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio – 20 Injection pressure bar 1,829 Shot volume cm³ 1,097 Shot weight (PS) g 998 Injection speed cm³/s 513 Max. plasticising rate g/s 108 Nozzle pressure kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating capacity kW 36 Number of cylinder heating zones – 7 Oil tank capacity l 1,075 Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 77.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, Type: KM 200-700 C2 (CLEAN ROOM) Year: 2000 Screw diameter: 50 mm Operating hours: 77,000 h Bdodpjwm Ifnofx Alajb With accumulator Euromap 12 Injection pressure: 1,892 bar Tie bar distance: 560 x 560 mm Platen size: 915 x 915 mm Minimum mold height: 350 mm Opening stroke: 700 mm Daylight: 1,050 mm