Beli Kraussmaffei Kmd-2-50-Kk bekas (95.147)

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Throughput capacity: 140–180 kg/h, screw diameter: 50–103 mm, screw length: 1300 mm, max. screw speed: 43 rpm, connected load: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, cylinder cooling unit, and screw temperature control. Gedpjhz Dyaefx Aa Hokb

Tahun pembuatan: 1996, Kondisi: baik (bekas), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: used, fully functional Model: KMD-2-50-KK Output capacity: max. approx. 140–180 kg/h for H-PVC pipes; output may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50–103 mm (conical) Screw length: 1300 mm Screw rotation speed: max. 43 m/min Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed section heating zone: 1 Tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw temperature control Gearbox: Gearbox was installed at 53,000 operating hours. Refurbished screws and barrel. Gedpfeh Nmt Dsx Aa Hekb Note: Current operating hours: 62,590

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, jam operasional: 4.545 h, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 114 mm, berat keseluruhan: 7.500 kg, KMD114-32 P, kondisi seperti baru, dijual. Gkedpfxjzxhfij Aa Hsb Ekstruder ini berasal dari laboratorium teknik dan oleh karena itu, langsung dari pemilik pertama. Jumlah jam penggunaan asli dan dapat diverifikasi. Sekrup dan silinder dalam kondisi seperti baru. Gigi transmisi berputar dengan sangat halus. Termasuk adaptor, corong, dan pemuatan ke truk. Spesifikasi teknis: - Tahun pembuatan 2006 - Sekrup untuk profil: 684 2929/8880 - Pendingin internal sekrup, ujung yang dilas - Kecepatan putar sekrup maksimum = 17 putaran/menit - Kecepatan putar dosis maksimum = 260 putaran/menit - 5 zona silinder, 15 zona alat + 4 pemanas bibir, suhu massa, tekanan massa - Kontrol C5 dengan kontrol penarikan, bahasa Inggris/Jerman Inspeksi dapat dilakukan kapan saja di 84405 Dorfen. Jika ada pertanyaan, kami siap membantu.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 ccm Clamping unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 995x1050 mm Ejector: hydraulic Gkjdpfx Aaszy In Te Hob Clamping unit: hydraulic Control system: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Controller with 16 hot runner zones Injection unit hardened – bimetallic Energy-efficient machine – features a system with 3 variable output hydraulic pumps Parallel movements Proportional valve on the injection unit – for precise injection Additional oil cleaning pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C Touch panel controller Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50x2.20x2.30 m All machines offered are put into operation by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 350-2000 AX / Mesin Elektrik / Lini Produksi dengan Robot Krauss Maffei LRX150-1018 Tahun Pembuatan: 2011 Unit Injeksi: Diameter Sekrup: 60 mm Berat Injeksi: 720 g Tekanan Injeksi: 2420 bar Volume Dosis: 792 ccm Unit Penutup: Gaya Penutup: 350 ton Jarak Tiang: 810x730 mm Ukuran Pelat Penjepit: 1110x1030 mm Pengeluaran: elektrik Unit Penutup: tuas lutut Pengontrol: MC6 - Layar Sentuh Gkodpfx Aozy Ipkea Hjb Peralatan Tambahan: Mesin Elektrik: hemat energi dan sangat senyap Euromap 67 Antarmuka Robot Tarik Inti Udara x 2 di sisi pelat penjepit tetap Tarik Inti Hidrolik x 3 di sisi pelat penjepit bergerak Pengontrol dengan saluran panas x 10 Unit injeksi tahan aus dan tahan terhadap korosi Motor utama mesin - motor servo yang digerakkan oleh inverter - hemat energi Pelumasan terpusat Gerakan paralel Penyesuaian ketinggian alat otomatis Robot Krauss Maffei LRX150-1018 Tahun Pembuatan: 2011 Robot 5 Sumbu: 4 sumbu digerakkan oleh motor servo (elektrik): X, Y-teleskopik, Z, B-rotasi; Sumbu C – pneumatik Jarak gerak pada sumbu: X-900, Y-1800, Z-2500 Paket keamanan untuk robot Robot dengan adaptor, ban berjalan, dan penutup pelindung Pembelian robot dan ban berjalan dengan biaya tambahan Dimensi: Berat: 22600 kg Panjang/Lebar/Tinggi: 8,00x2,35x2,30 m Semua mesin yang ditawarkan akan diuji oleh teknisi servis kami sebelum dijual. Dimungkinkan untuk mendapatkan video pengujian teknis mesin yang dipilih atau berpartisipasi dalam pengujian teknis langsung di perusahaan kami di Łódź. Harga: Sesuai Permintaan

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: fungsi terbatas, berat keseluruhan: 18.500 kg, Kami menawarkan mesin injeksi plastik KraussMaffei 200-750 EX bekas, buatan tahun 2013. Tipe: KM 200-750 EX Penamaan ukuran internasional: KM 750 EX/200 Tahun pembuatan: 2013 Nomor mesin: 61019432 Berat mesin: 18.500 kg Gjdpfx Ajzxk Ruoa Hskb Harap diperhatikan! Mesin ini dijual tanpa sertifikasi kesesuaian mesin, karena pintu pengaman pada sisi pengoperasian tidak ada. Panel kontrol dipasang di bagian belakang mesin. Jika Anda memiliki pertanyaan lebih lanjut atau memerlukan informasi tambahan, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Gaya penutup: 500 kN Pelat penjepit: 540 x 540 mm Jarak bukaan cetakan: 350 mm Tinggi pemasangan cetakan minimum: 200 mm Diameter sekrup: 30 mm Tekanan injeksi: 2025 bar Volume injeksi: 74 cm³ Lebar bukaan: 500 mm Langkah ejektor: 100 mm Gedpfx Aaezg T I Ss Hokb Berat total: sekitar 2.300 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Mesin Injeksi Krauss Maffei KM 350–2700 C2+ Tahun Pembuatan: 2004 Pengontrol: MC4 Data Teknis Unit Penutup * Gaya Penutupan: 3500 kN (350 ton) * Dimensi Pelat: 1060 × 1095 mm * Jarak Kolom: 710 × 710 mm * Langkah Pembukaan: 920 mm * Pembukaan Maksimum: 1300 mm * Tinggi Cetakan Minimum: 380 mm * Langkah Pengeluaran: 250 mm * Gaya Pengeluaran: 95 / 48 kN Unit Injeksi * Diameter Sekrup: 80 mm * Tekanan Injeksi: 1829 bar * Volume Injeksi: 1433 cm³ * Berat Injeksi (PS): 1304 g Gsdpfezkadbjx Aa Hekb * Kecepatan Rotasi Sekrup: 218 / 284 putaran/menit * Kapasitas Injeksi Maksimum: 1508 cm³/s Sistem Plastifikasi * Versi untuk Termoplastik * Perlindungan Abrasi * Katup Periksa * Nosel Terbuka Sistem Penggerak * Daya Motor Pompa: 75 kW * Daya Pemanas: 36 kW * Jumlah Zona Pemanas: 7 * Kapasitas Tangki Oli: 720 l * Waktu Siklus Kering (Euromap): 1550 siklus/jam Dimensi dan Berat * Dimensi (panjang × lebar × tinggi): 6910 × 2040 × 2410 mm * Berat Mesin: 16,7 ton Informasi Tambahan * Pengontrol MC4 dengan Monitor Berwarna * Mesin disesuaikan untuk modernisasi dengan sistem ESS (penghematan energi hingga 30–60%)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Godoxqhuuopfx Aa Hjkb Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit Gsdpfx Ajtrya Rja Hekb - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: baik (bekas), Tahun pembuatan: 2005, 1 Gsdpfjx H Au Rox Aa Hjkb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, KM 500/2700C2 Technical Data Clamping Unit: Clamping force: 5000 kN Tie bar spacing (h x v): 900 x 800 mm Minimum mould height: 480 mm Maximum platen distance: 1650 mm Centering diameter: 200 mm Mould weight: 7900 kg Injection Unit: Gsdpfx Aaszgwbvs Hokb Screw diameter: 80 mm Shot volume: 1433 ccm Injection pressure: 1829 bar Equipment: MC 4 control system Core pulls: 2+2 Machine is sold without robot and peripherals!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Gedsyv E Nvjpfx Aa Hskb Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 135 mm, jarak antara tiang: 1.140 mm, lintasan ejektor: 300 mm, TECHNICAL DETAILS Clamping force: 8,500 kN Mold opening force: 560 kN Platen dimensions (h x v): 1,600 mm x 1,600 mm Tie bar spacing (h x v): 1,140 mm x 1,140 mm Maximum daylight opening: 1,600 mm Mold height (min-max): 500 mm – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Shot weight for PS: 6,098 g Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic equipment Pump motor rated power: 132 kW Dry cycle time according to Euromap 6: 965 1/h Hydraulic tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle opening: 9 mm Gjdpfxey T Hmks Aa Hjkb Dimensions & Weight Installation space (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control unit: 49 t EQUIPMENT Krauss Maffei robot LRX 500 MC 5 control system with color monitor Integrated control panel and USB data storage Complete plasticizing unit for thermoplastics Non-return valve

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, gaya penjepit: 40.000 kN, diameter sekrup: 135 mm, berat injeksi: 7.837 g, produsen pengendali: KRAUSS MAFFEI, Mesin cetak injeksi hidraulik, tahun pembuatan 2002. Krauss Maffei 4000-24500 MC ini memiliki gaya penguncian 40.000 kN dan volume injeksi 10.735 cm³. Mesin ini memiliki diameter sekrup 135 mm dan lebar bukaan maksimum 4.200 mm. Jika Anda mencari kapasitas cetak injeksi berkualitas tinggi, Anda sebaiknya mempertimbangkan Krauss Maffei 4000-24500 MC yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. KraussMaffei 4000-24500 MC Gksdpfx Ajzk E Thsa Heb • Gaya penguncian: 40.000 kN • Volume injeksi: 10.735 cm³ • Berat injeksi (PS): 7.837 g • Tekanan injeksi: 2.276 bar • Diameter sekrup: 135 mm • Rasio L/D sekrup: 23 • Radius nosel: 25 mm • Penutup nosel: hidraulik • Kedalaman pencelupan nosel: 40 mm • Ukuran pelat (T × L): 3.315 × 2.920 mm • Bukaan bersih (T × L): 2.240 × 1.800 mm • Langkah bukaan minimum: 2.200 mm • Tinggi pemasangan cetakan: 1.100–2.000 mm • Lebar bukaan maksimum: 4.200 mm • Cincin pemusat (pelat tetap): 315 mm • Cincin pemusat (pelat bergerak): 315 mm • Sistem pengunci cepat untuk cetakan: QMC 101.450 • Zona kontrol saluran panas: 48 • Sirkuit kontrol kaskade pneumatik: 10 • Sirkuit kontrol kaskade hidraulik: 12 • Sirkuit penarik inti (pelat tetap): 3 • Sirkuit penarik inti (pelat bergerak): 4 • Sirkuit pendingin (pelat tetap): 18 • Sirkuit pendingin (pelat bergerak): 18 • Pengontrol suhu: 36 • Tegangan suplai: 400 V • Suplai listrik: 3 fase • Frekuensi: 50 Hz • Arus motor: 622 A • Arus pemanas: 583 A • Sekring motor: 630 A • Sekring untuk pemanas: 630 A

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould installation height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Gjdpfx Aajx Eluks Hokb Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) Gedpfx Aaow U N Ixo Hskb - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), A total of 9 partially dismantled injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines include robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation available. On-site inspection possible. Godsugmx Aopfx Aa Hjkb

Kondisi: bekas, Tahun pembuatan: 2005, Mesin Cetak Injeksi Pabrikan: Krauss Maffei Gsdpexu Uvasfx Aa Hjkb Tipe: KM350 /1900 C2 Tahun Pembuatan: 2005 Gaya Penutup: 3.500 kN Gaya Pembuka Cetakan: 220 kN Gaya Penggerak Pelat Bergerak: membuka: 105 kN menutup: 95 kN Pelat Penjepit (l x t): 1.060 x 1.095 mm Jarak Bebas (l x t): 710 x 710 mm Langkah Pembukaan Cetakan: 920 mm Tinggi Pemasangan Cetakan min.: 380 mm Jarak Pembukaan: 1.300 mm Langkah Pengeluaran: 250 mm Gaya Pengeluaran depan/belakang: 95 / 48 kN Motor Pompa: 75 kW Daya Pemanas Terpasang: 30 kW Zona Kontrol Pemanas Silinder: 6 Tingkat Aliran Kering: 1.550 1/h Isi Oli: 720 liter Dimensi dan Berat: Berat Bersih dengan Lemari Kontrol: sekitar 16,0 ton P/L/T: 6.510 x 2.040 x 2.380 mm Berat Cetakan maks.: 4.780 kg Unit Injeksi: Kapasitas Kerja: 1900 Diameter Sekrup: 70 mm Tekanan Injeksi: 1.778 bar Volume Langkah: 1.047 cm3 Berat Injeksi per Siklus: 953 g Aliran Injeksi: 527 cm3/s Kecepatan Rotasi Sekrup Standar / Opsi: 1/menit 285/349 Kecepatan Rotasi Sekrup Standar atau Tahap 1: 95 PS Kecepatan Rotasi Sekrup Opsi atau Tahap 2: 117 PS Gaya Sistem Nozel: 82 kN Sistem Penutup Hidraulik Penuh dengan 2 Palet Pengaturan PV untuk Unit Injeksi Kontrol Mikroprosesor MC4 32-bit Panel Kontrol Terintegrasi dengan Layar Warna TFT dan Drive Disket (3,5 inci) untuk Pencadangan Data Plastifikasi: 1 set lengkap unit plastifikasi termoplastik dengan konstruksi tahan aus, diameter sekrup 70 mm dengan katup anti-aliran balik dan nozel terbuka Radius Nozel: 15,00 mm Diameter Lubang Nozel: 6,00 mm 9926

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 69.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, diameter sekrup: 45 mm, Dijual mesin injeksi merek KraussMaffei tipe KM 125-700C2. Mesin dalam kondisi fungsional penuh dan masih beroperasi hingga akhir-akhir ini. Data teknis: Tahun pembuatan: 2000 Jam operasional: 69.000 jam Gaya penutup: 125 t Diameter silinder: 45 mm Katup jarum: Pneumatik Godpex Ituqsfx Aa Hekb Penarik inti: 2x hidrolik Sensor tekanan internal

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 120 mm, lintasan ejektor: 300 mm, langkah pembukaan: 1.900 mm, DETAIL TEKNIS Gaya penutup: 9.500 kN Gaya buka: 665 kN Jarak antar pilar: 1.400 x 1.150 mm Pelat penjepit: 1.960 x 1.710 mm Stroke pembukaan: 1.900 mm Gksdsy T H A Ejpfx Aa Heb Tinggi cetakan minimum: 500 mm Tinggi cetakan maksimum: 1.200 mm Lebar pembukaan maksimum: 2.400 mm Stroke ejector: 300 mm Sekrup berkapasitas tinggi HPS-UN, diameter: 120 mm Radius nosel: 30 mm Bukaan nosel: 12 mm Diameter sekrup: 120 mm Berat tembakan (HDPE): 5.420 g Volume tembakan: 7.634 cm³ Tekanan injeksi spesifik: 2.257 bar DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 12.770 x 3.420 x 2.750 mm Berat mesin: 61,5 t

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 29.000 h, gaya penjepit: 50 kN, volume langkah: 59 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 3.700 kg, diameter konveyor sekrup: 25 mm, Freight basis: ex works Delivery time: by arrangement Terms of payment: 100% prior to machine collection, strictly net Manufacturer: Krauss Maffei Model: KM50-180AX Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Gksdpfxsppigde Aa Heb Centering diameter (nozzle/ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 x (hydraulic core pull unit) Air valves: 2 Hot runner zones: 6 Robot interface: Euromap 67 Other equipment: Quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions (L x W x H): 4.4 x 1.6 x 1.9 m

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Two injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei KM 50 C1 - Year of manufacture: 1999 - Injection unit: SP220 - Screw diameter: 30 mm - L/D ratio: 23 - Injection pressure: 2500 bar - Shot volume: 85 cm³ - Machine dimensions (LxWxH): approx. 3200 mm / 1350 mm / 1800 mm - Weight: approx. 2500 kg - Control system: MC4 - Operating hours: approx. 86,000 h 2) Krauss Maffei KM 125 C1 - Year of manufacture: 2000 - Injection unit: SP520 - Screw diameter: 45 mm - L/D ratio: 20 - Injection pressure: 1878 bar - Shot volume: 217 cm³ - Machine dimensions (LxWxH): approx. 4500 mm / 1550 mm / 2200 mm - Weight: approx. 5500 kg - Control system: MC4 Gkodpfjw Emybox Aa Hob - Operating hours: approx. 82,000 h Documentation is available. On-site inspection possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax notice and benefit for used machinery: As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine Control: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete service record for the past 7 years / 25,000 h of operation 1st injection unit 750 horizontal Injection unit/screw: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical Injection unit/screw: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2500 bar Clamping unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Full machine data sheet attached as PDF Nozzle side: needle shut-off A+C 1 x hydraulic core pull Gedpfoyf Uy Usx Aa Hekb 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water circuit BGS: 6 zones each on nozzle and ejector side BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs. Information about the company and our machines: - We only sell machines purchased from running production, stored at our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies where maintenance and care are standard practice - All available machines can be viewed in our warehouse.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 27.000 h, gaya penjepit: 6.500 kN, Krauss Maffei KM650-3500 C2 injection molding machine for sale Gedpeyn Sc Eofx Aa Hekb The machine is in very good condition, having only been operated in single-shift production for small batch and sample runs. A new hydraulic pump was installed recently (approx. 300 operating hours). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and linear guides show no damage, like new - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic barrel - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Powered inspection possible. Further accessories such as Motan dryer, chiller unit and more available upon request. The machine can be dismantled and loaded by us by arrangement. We look forward to your inquiry.