Beli Kraussmaffei Krauss Maffei Km250-1400Cx (2014) Biru Power Lrx150 Robot Linier bekas (41.351)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, gaya penjepit: 2.500 kN, Perlengkapan: dokumentasi / manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar spacing: 630 x 630 mm Hjdpexqhfysfx Abyon Shot weight: 471 g (PS) Shot volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min./max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Machine equipment:_ 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× on operator side + pressure relief system 3. 8-circuit water manifold with solenoid valve shut-off 4. 4-zone hot runner control (ZE 88.5404) 5. MC6 control with 19″ touch TFT screen 6. PV control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving BluePower servo drive system LRX 150 linear robot (payload &lt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 ccm Clamping unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Hsdsy Sl Dlopfx Abyjn Platen size: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Controller with 16 hot runner zones Injection unit hardened – bimetallic Energy-efficient machine – features a system with 3 variable output hydraulic pumps Parallel movements Proportional valve on the injection unit – for precise injection Additional oil cleaning pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C Touch panel controller Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50x2.20x2.30 m All machines offered are put into operation by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: Screw diameter: 80 mm Shot weight: 1464 g Injection pressure: 1855 bar Metering volume: 1608 cc Clamping Unit: Clamping force: 400 t Tie bar spacing: 920x830 mm Platen size: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. mould height: 400/900 mm Air valve x 4 Hydraulic core pull x 4 Hot runner control x 36 Self-closing nozzle x 10 Hardened injection unit - bimetallic Proportional valve on the injection unit – precise injection Automatic upper tie bar extraction function Machine regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 robot Year of manufacture: 2018 High-speed robot 5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation) and C Vacuum Hjdjy Sl D Eepfx Abyjn Touch panel control Robot including adapter, conveyor belt and protective housing Purchase of robot and conveyor at extra cost Dimensions: Weight: 22,650 kg Length/Width/Height: 7.58x2.73x2.32 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine is available on request or you may participate in live technical tests at our company in Łódź. Price: On request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 54.872 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, volume langkah: 570 cm³, tekanan injeksi: 2.387 batang, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, de001 Hsdpsyv Elwjfx Abyen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2,007 bar Metering volume: 679 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 interface Robot interface Air valve with vacuum monitoring x 1 Hjdpfey Sl A Iox Abyen Hydraulic core pull units x 3 Air core pull units x 3 Hot runner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt subject to surcharge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.900 h, gaya penjepit: 1.600 kN, diameter sekrup: 105 mm, jarak antara tiang: 18.701.420 mm, volume langkah: 4.546 cm³, panjang total: 13 mm, lebar total: 4 mm, tinggi total: 3 mm, berat keseluruhan: 83 kg, tekanan: 1.778 batang, 8 saluran panas 16 sekuensial pneumatik 2 peniup SERVO POMPA Hsdpsy I Apqjfx Abyen PC MC6 BERAT 83T JARAK ANTAR PLAT 3400MM

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61024546, gaya penjepit: 800 kN, diameter sekrup: 40 mm, berat injeksi: 180 g, jumlah injeksi: 1, jenis arus masuk: tiga fasa, - Sistem kontrol MC6 - APC Hodpeya Egusfx Abyen

Tahun pembuatan: 2020, Kondisi: baru, Krauss Maffei touch panel, latest version for MC5/MC6 spare parts. Width: 37 cm, height: 47 cm, depth: 8 cm. Hodpjqvuicefx Abyon

Kondisi: bekas, Krauss Maffei mainboard Hjdpsu Axihjfx Abyjn

Kondisi: baru, es handelt sich um neue, unbenutzte ersatzteile krauss maffei mc 5 anzeige m5v121 neu, unbenutzt wurde fuer eine krauss maffei 2300 tonnen maschine gekauft m5-anzeigeeinheit 12z lxbxh 310x 360x60 mm 3600 g Hodpfxoygucfs Abysn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Hjdpfx Ajxqhuujbyjn Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax notice and benefit for used machinery: As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine Control: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete service record for the past 7 years / 25,000 h of operation 1st injection unit 750 horizontal Injection unit/screw: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical Injection unit/screw: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Hsdjyf Uy Ujpfx Abyen Injection pressure: 2500 bar Clamping unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Full machine data sheet attached as PDF Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water circuit BGS: 6 zones each on nozzle and ejector side BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs. Information about the company and our machines: - We only sell machines purchased from running production, stored at our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies where maintenance and care are standard practice - All available machines can be viewed in our warehouse.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 78.454 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, jarak antara tiang: 630 mm, volume langkah: 678 cm³, tekanan injeksi: 2.007 batang, tinggi pemasangan: 330 mm, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, d85a8603 Hjdpfx Aboyxmz Eeyjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 81.000 h, Data teknis Tahun pembuatan: 2007 Sisi penutup Gaya penutup: 1300 t Maks. jarak bukaan/t tinggi pemasangan: 2300 mm Jarak maksimum pelat penjepit: 4000 mm Tinggi pemasangan cetakan min./maks.: 1000 - 1700 mm Tinggi maksimum pelat penjepit: 1910 mm Ukuran cetakan minimum: 1000 - 1700 mm Jarak bebas antar tiang: 1500 mm Radius nosel: R40 mm Berat cetakan: 29000 kg Stroke ejector: 350 mm Sisi injeksi Diameter screw: 135 mm Volume langkah: 8588 cc Hedpfxoyifgko Abyon Core puller AWS/DS: 1/1 Penutup jarum pneumatik: 1 Mesin dikirim bersama robot Kuka dan dapat dilihat dalam operasi produksi.

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Hedpjuiykdsfx Abyon

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61029386, gaya penjepit: 2.000 kN, diameter sekrup: 70 mm, Perlengkapan: dokumentasi / manual, Dijual mesin injection molding KraussMaffei 200/1400 CX POL BMC dalam kondisi sangat baik. Jam operasi sedikit, diproduksi tahun 2017, mulai digunakan tahun 2018. Kontrol MC6. Untuk detail lebih lanjut, silakan hubungi kami melalui email! Terima kasih! Hjdpfxjwz Iv Ao Abyon

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping unit. MC 6 control system based on an industrial computer operating in real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a colour touch screen. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle opening: 6 mm Technical specifications (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater capacity: 22.4 kW Hjdpfx Ajxdd Spobysn Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Injection Moulding Machine Krauss Maffei KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Max opening width: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Hsdpfxexak Uco Abyon Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Net weight (including control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight (PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Hsdpow A N Hfsfx Abyen Maximum mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface compliant with Euromap 67 Additional information: Machine located in Poland Ready for collection Possibility to arrange loading, transport, installation, and commissioning

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 13.000 kN, KM1300-8100MX-2016 Hsdpfey Emursx Abyjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 6.500 kN, Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars (vertical): 960 mm Distance between tie bars (horizontal): 1110 mm Shot volume: 1284 cm³ Type: Horizontal Drive: Hydraulic Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars (vertical): 960 mm Distance between tie bars (horizontal): 1110 mm Shot volume: 1284 cm³ Type: Horizontal Drive: Hydraulic Injection Moulding Machine – KM 650 GX Injection Unit: SP 3000 Screw Diameter: 80 mm Clamping Unit Clamping force: 6500 kN Mold holding force: 455 kN Platen dimensions (H × V): 1540 × 1440 mm Space between tie bars (H × V): 1110 × 960 mm Max. mold height: 1450 mm Mold installation height (min./max.): 450 / 1000 mm Opening stroke: 1000 mm Ejector stroke: 250 mm Ejector force (forward/return): 95 / 49 kN Injection Unit Screw diameter: 80 mm L/D ratio: 21.3 Injection pressure: 1538 bar Hjdpoy Eyxdjfx Abyjn Shot volume: 1284 cm³ Shot weight (PS): 1170 g Injection rate: 141 cm³/s Injection speed: 133 mm/s Injection power: 60 kW Plasticizing rate (PS): 139 g/s Installed heating power: 36 kW Nozzle retraction force: 7 kN Drive and Energy Installed pump power: 90 kW Dry cycle time (EUROMAP 6): 3.0777 s Dry cycle time (KM norm): 2.5555 s Machine Dimensions and Weight Dimensions (L × W × H): 8.03 × 2.88 × 2.45 m Net weight: 12,000 kg Max. mold weight: 11,000 kg Oil tank capacity: 1,180 l

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Hodpfx Aoyh I Emjbyjn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, gaya penjepit: 1.700 kN, Spannkraft: 1700 t Hsdpfx Aey Uk Emjbysn Schraubendurchmesser: 105 mm Abstand zwischen den Stützstreben V: 1420 mm Abstand zwischen den Stützsäulen H: 1870 mm Schussvolumen: 3721 cm³ Typ: Horizontal Antrieb: Hydraulisch KUKA-Roboter 6 Achsen Maschine neuwertig!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 800 kN, 1 Hedpfxsy Uffuj Abyen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 4.517 h, gaya penjepit: 16.000 kN, diameter sekrup: 125 mm, berat injeksi: 7.450 g, This 3-axis hydraulic injection moulding machine, Krauss Maffei 1600-17200MC, was manufactured in 2001. It offers a clamping force of 16,000 kN and a screw diameter of 125 mm. The maximum shot weight is 7,450 g, and the platen size is 2,600 x 2,110 mm. If you are looking for a high-quality injection moulding machine, consider the Krauss Maffei 1600-17200MC, which we are offering for sale. Contact us for further details. • Injection unit: 17200 • Tie bar spacing (h × v): 1,600 × 1,250 mm • Platen size (h × v): 2,600 × 2,110 mm • Daylight opening (x × y): 1,800 × 1,400 mm Hedpfsyyyr Tox Abyen • Maximum mould opening stroke: 2,500 mm • Mould installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mould opening force: 1,108 kN • Movable platen force: Open 177 kN / Close 153 kN • Ejector stroke: 300 mm • Ejector force (forward/reverse): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder / screw set (1x) • Internal cooling system • Core pull unit (2x)