Beli Mütek Map 1200 bekas (5.502)

Kondisi: baik (bekas), refurbished_used_machine basic_machine_starts_at_a_price_of_147700_euros_net *Options_available_at_extra_cost_see_below with_full_1_year_warranty ready_for_delivery_approx_16_weeks_after_order Technical_data: Throughput_capacity_up_to_a_maximum_of_1200_kg/h_(depending_on_m aterial) (e.g._sawdust_with_a_bulk_density_of_180_kg/cbm) Briquette_diameter:_75_mm including_2_m_press_channel Main_motor_power:_45_kw Feed_screw_gear_motor:_2_x_2.2_kw Compressor_screw:_2_x_5.5_kw Distributor_screw:_2.2_kw Hydraulic_pump_motor:_0.37_kw Total_connected_load:_65_kw Control_panel_with_plain_text_display_for_operating_states and_load_display_for_main_drive_and_feed_screws PLC_control_Siemens_S7/300_with_operating_hours_counter_in_contr ol_cabinet Machine_has_CE_mark Automatic_start/stop_function_for_the_machine Dimensions:_3100x860x1800_mm_(LxWxH) Weight:_4500_kg Options: Silo_for_MAP_series_(suitable_only_for_one_press_of_type_MAP_120 0) -Storage_silo_above_the_machine- Capacity:_approx_6_cbm,_solid_steel_construction_with_agitator_d ischarge_and_level_sensor. 19,700_euros_net_plus_VAT Kodpe E Dqusfx Ahhjlt -Temperature_control_unit_for_press_tools for_maintaining_temperature_for_optimal_briquette_quality. Temperature_controller_for_pump,_cooling_unit,_fan,_pressure_swi tch Wired_ready_to_connect_-_mandatory_for_operation including_matching_control_unit 7,850_euros_net -Guillotine_for_cutting_briquettes_to_length Compressed_air_connection_on_site_required 6,940_euros_net_plus_VAT -Conveying_line_/_cooling_section_(nominal_value:_4x2m) Per_2_meters:_990_euros_net Installation_/_commissioning_(nominal_value_per_press:~2-3_days_ on_site) Based_on_actual_hours,_separately_billed._The_following_rates_ap ply: Service_technician/mechatronics_per_installation_and_travel_hour :_129.00_euros Overtime:_25%_surcharge Saturday_and_night_hours:_50%_surcharge Sunday_and_public_holiday_hours:_100%_surcharge Daily_allowance_per_fitter:_depending_on_country Per_car/van_kilometer:_0.98_euros/km Travel_and_accommodation_on_receipts_or_flat-rate_to_be_borne_by _the_customer. Test_with_customer's_own_material:_(by_arrangement,_up_to_max_75 0_kg)_-_1,970_euros_net_fixed ---- Raw_material_requirements: - Moisture_content_(atro):_minimum_6%_to_maximum_18% - Maximum_chip_length:_20_mm - Installation_temperature:_heated_room_at_least_+5°C - Feed_must_be_free_of_metals_and_mineral_contaminants._Damage_to_ press_tools_and/or_increased_wear_may_result.

Kondisi: baik (bekas), Used, good condition. Technically inspected used machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (for example for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optional production of short briquette tablets possible Technical data: Throughput rate up to max. 750 kg/h (depending on material) (e.g. sawdust with a bulk density of 250 kg/m³) An exact statement on throughput can only be made after testing with your material, as this may vary significantly depending on bulk density. Customs tariff number: 84793010 Briquette diameter: 65 mm including 2 m press channel Main motor power: 37 kW Feed screw gear motor: 2.2 kW Compactor screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with operating hour counter in switch cabinet Machine bears CE mark Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3800 kg Options at extra cost: Temperature control unit for press tools For maintaining optimal temperature and briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch. Wired ready for operation – essential for functionality including corresponding control system + €7,850 net Guillotine or tablet breaker, Klsdpfx Ahefmqq Eohet For cutting briquettes to length + €6,900 net Connection to compressed air required! Silo for MAP series + €19,940 net – Storage silo above machine – Capacity approx. 6 m³, robust steel construction with agitator discharge and level indicator. Transport pipe / cooling section (nominal size: 4x2m) Every 2 meters €990 net Assembly / commissioning (nominal: approx. 2–3 days on site) Billed by time and material. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Saturday/night hours: 50% surcharge Sunday and holiday hours: 100% surcharge Per diem per technician: depending on country Per car/van and driven kilometer: €0.98 / km Travel and accommodation: reimbursed based on receipts or by flat rate, borne by the client. Testing with customer material: (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for raw material: – Moisture content (atro) must be at least 6% and no more than 15% – Chip length max. 18 mm – Installation temperature: heated space, at least +5°C – Feedstock must be free of metals and mineral impurities. Damage to press tools and/or increased wear may otherwise occur.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, EN Kedpfx Ahoy Nxnloholt

Kondisi: baik (bekas), Perfecta BSH5-1200 Pengangkat Tumpukan Kertas Perangkat dalam kondisi sempurna. Penggerak hidrolik, unit hidrolik modern. Catu daya 400V. Siklus pengangkatan otomatis dan manual, operasi cepat. Kapasitas angkat: 1200 kg. Dimensi palet/lembar: 990 x 1350 mm. Kedsy Tu Euopfx Ahhjlt Dokumentasi disertakan.

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Kjdpfxechuvrj Ahhjlt

Kondisi: baru, Tahun pembuatan: 2026, en-GB Kjdpfx Aed Nm Sijhhjlt

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density Kodpfx Ahogl Nlmehslt *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This is the ideal machine for shredding bulky, lightweight aluminium chips or turnings. Not suitable for processing solid aluminium parts. Included features: + Optimized cutting geometry + Customized pusher control + Load-dependent, hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 40x40 mm, multiple cutting edges can be rotated Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as required (15 - 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Shredder height increase by 30 cm (preparation for conveyor belt) + €2,990 net - Angled conveyor belt (discharge height approx. 220 cm) + €9,770 net Kodpfxegmh H Te Ahholt - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Klodpfx Ahsv Rpxlohjt Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: seperti baru (mesin pameran), en-demo-unit-with-7-operating-hours-another-machine-available-im mediately-ex-works-neckartailfingen-shredder-mrz-830-customs-tari ff-number-84659600-infeed-opening-800x1000-mm-motor-185-22-kw-400 -v-50-hz-3-ph-blades-reversible-multiple-times-hydraulically-actu ated-pusher-screen-size-as-selected-10-40-mm-weight-approx-1600-k g-dimensions-lxwxh-approx-2290-x-1420-x-1750-mm-turbo-clutch-stan dard-features-include-automatic-star-delta-start-fast-hydraulics- auto-shutdown-when-rotor-idles-rotation-speed-70-90-rpm-for-high- throughput-cycle-control-to-avoid-downtimes-performance-enhancing -step-control-for-hydraulic-pusher-pertinax-guides-for-hydraulic- pusher-vibration-damping-machine-feet-ce-compliant-the-shredder-i s-designed-for-the-size-reduction-of-untreated-wood-chipboard-and -mdf-panels-other-materials-upon-testing-and-approval-by-the-manu facturer-included-30-cm-higher-machine-frame-prepared-for-conveyo r-belt-optional-shredder-accessories-angled-conveyor-belt-eur-877 0-net-horizontal-section-1200-mm-inclined-section-2500-mm-angle-a djustable-0-60-degrees-discharge-height-approx-2000-mm-+-100-mm-o verband-magnet-eur-6780-net-conveyor-and-overband-magnet-control- eur-2750-net-start-and-stop-synchronously-with-shredder-raw-mater ial-requirements-moisture-content-absolutely-dry-must-be-below-30 -metals-and-mineral-contaminants-such-as-sand-stones-etc-lead-to- increased-wear Kljdpfsv Sqrpjx Ahhot

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation Kedpfxechqxxj Ahhslt • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2025, Ideal for shredding straw, polystyrene foam (EPS), leaves, hay, and bread. Throughput is highly dependent on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW, 400 Volt (alternatively 9.2 kW or 15 kW available upon request) Optional: *Surcharge for next largest machine with 18.5 kW and larger silo diameter: + €2,750 net Robust steel construction Hardened cutting blades Screen with interchangeable inserts Available perforations: 10, 15, 22, 26, 30, 40, or 60 mm When equipped with electric drive: star-delta switch, overload protection, and 8 m ready-to-plug power cable Blow-out nozzle, 150 mm diameter Suitable for plastic or grain pipes Klsdpfezbizjx Ahhst Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and a swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH) Weight approx. 240 kg Spare part prices and options: 24 hardened blades, €9.90 each net 6 bolts, €14.90 each net 1 screen, €475 net Lid, €290 each net Polystyrene disk, €600 each net

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Kodoxfwdopfx Ahhslt

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: Kodpfxjb Ny Eys Ahholt + Profile rotor for increased throughput performance We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Kedpfx Ajdubpushhjlt Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Kljdpsd H R Sxjfx Ahhst Parts should be max. approx. 500 x 500 mm* *Height is less critical Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Kedpfxofci D Ao Ahholt Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: baru, Tahun pembuatan: 2026, Delivery time: Approx. 4–5 months Your advantages: + Extremely large cutting unit opening; 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW drive power Technical data: Color: grey / blue Feed opening top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40 (selectable) Tools: 37/70 knives Suction nozzle diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (LxWxH) Weight (approx. kg): 3,500 Optional at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics, for increased output - Preparation for conveyor belt discharge Ksdpfx Ahsgbkkrsholt - Conveyor belt - Overbelt magnet HAWK-EYE *For shredding veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Option: Pusher Extension *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with pusher extension option, the top cutting unit opening is 1300 x 1700 mm, surcharge +14,975.–) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (atro) must be below 20% - Material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Kljdpfx Asgfm Ryshhjt Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for both hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour (*depending on screen size and material. Significantly higher throughput possible for smaller wood residues) Motor: 22 kW; 400 V – 50 Hz – 3-phase Screen: 15/20 mm or by arrangement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) – can be swapped Suction connection Ø 200 mm Feed opening: 1000 x 1000 mm Dimensions: 2000 x 1800 x 1645 mm Sample picture above: machine color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulic system - Auto stop function with rotor idle - Rotation speed: 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-boosting incremental pusher control - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform Available options (for additional charge): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Conveyor and magnet control unit + €2,750 net (start/stop synchronized with shredder) - Enlarged hopper 1500 x 1500 mm + €3,480 net Raw material requirements: Kodpfx Ahox Af Rdjhelt - Moisture content (atro) must not exceed 25% - Material feed must be free of metals and mineral contamination. Otherwise, tool damage and/or increased wear may occur.

Kondisi: baru, Tahun pembuatan: 2026, Consisting of Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor and the milling unit feed is activated. The tines of the milling rotor tear the straw from the bale and throw it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical Data – Bale Breaker: - Capacity: 1–2 bales per hour - Up to max. 600 kg/h (depending on sieve size in the straw mill and kW of the straw mill). Without straw mill, the bale breaker alone can process up to max. 900 kg/h of loose straw. - Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) - Milling unit motor: 5.5 kW, 380 Volt - Chain conveyor drive: 0.75 kW, 380 Volt - Dimensions: 3750 x 1730 x 2460 mm (L x W x H) - Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; immediately available Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €2,750 net Technical Data – MHZ with special hopper: - Motor: 15 kW, 380 Volt electric motor - Rotor diameter: 600 mm - Hardened cutting blades - Sieve with exchangeable inserts (10, 12, 15; 22, 30, 45 mm perforation selectable) - With star-delta switch, overload protection and 8 m pre-wired supply cable (plug ready) - Discharge nozzle: 160 mm - Blowing distance: approx. 12 m - Dimensions: 1600 x 1020 x 1360 mm (L x W x H) - Weight: approx. 240 kg --- Optional equipment at extra cost: - Feed screw: + €970 net Klodpfx Ahjb Nulhjhst - Cyclone (customer to provide suspension) *Should be max. 10 m away + €2,970 net - Simple filter: €1,750 net --- Further options: - Industrial extraction system (demo unit) + from €9,950 net - Optional cellular wheel sluice *makes material pressureless + €5,750 net - Control unit: from €1,620 net - Special breaker extension 3 m (other dimensions must be calculated) + €9,750 net - Briquetting press MPP 180 S; demo unit, lightly used 70 mm briquette – up to max. 100 kg/h from €39,700 net *larger machines available on request --- Description: muetek bale breaker has been developed for breaking up round and square bales of hay and straw. The shredder flange-mounted to the bale breaker shreds straw from all types of cereals, as well as hay, maize, and miscanthus. muetek machines from the MHZ / MHB series are characterized by robust construction and heavy-duty design. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale is placed with a front loader. The support is adjustable depending on bale type. The chain conveyor presses the bale against the milling rotor; the feed speed is adjustable. The milling rotor is fitted with multiple teeth to break apart the straw bale. The separated straw is ejected. --- These machines are generally suitable for dry input materials: - Straw - Hay --- Processing hemp bales is only possible with a special breaker Surcharge approx. €9,720 net *depending on version Hemp cannot be shredded with the straw mill. Feed material requirements: Moisture content max. 12%

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Ksded N Dnhopfx Ahhslt

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant Kodpfxjd Su Hxs Ahhelt 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: Klsdpfxeffh Atj Ahhjt - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Ideal for shredding Styrofoam or similar materials Throughput highly dependent on screen size and input material: - Up to 60 kg/h with EPS using a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW - 400 Volt Robust steel construction Hardened cutting knives Screen with interchangeable inserts Available perforations: (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive equipped with star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 150 mm Optional for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Klsdpfx Aheh S H T Ujhjt Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)