Beli Mütek Mgz 630 bekas (1.829)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). Gsdpfx Alsdwktkokjbl *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for both hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour (*depending on screen size and material. Significantly higher throughput possible for smaller wood residues) Gsdpfx Aox Af Rdjlkjbl Motor: 22 kW; 400 V – 50 Hz – 3-phase Screen: 15/20 mm or by arrangement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) – can be swapped Suction connection Ø 200 mm Feed opening: 1000 x 1000 mm Dimensions: 2000 x 1800 x 1645 mm Sample picture above: machine color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulic system - Auto stop function with rotor idle - Rotation speed: 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-boosting incremental pusher control - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform Available options (for additional charge): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Conveyor and magnet control unit + €2,750 net (start/stop synchronized with shredder) - Enlarged hopper 1500 x 1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must not exceed 25% - Material feed must be free of metals and mineral contamination. Otherwise, tool damage and/or increased wear may occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Gsdpfxed H R Sxo Alkjbl Parts should be max. approx. 500 x 500 mm* *Height is less critical Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Kondisi: baru, Tahun pembuatan: 2026, Delivery time: Approx. 4–5 months Your advantages: + Extremely large cutting unit opening; 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW drive power Technical data: Color: grey / blue Feed opening top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40 (selectable) Tools: 37/70 knives Suction nozzle diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (LxWxH) Weight (approx. kg): 3,500 Optional at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics, for increased output - Preparation for conveyor belt discharge - Conveyor belt - Overbelt magnet HAWK-EYE *For shredding veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Option: Pusher Extension *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with pusher extension option, the top cutting unit opening is 1300 x 1700 mm, surcharge +14,975.–) *significantly longer production time required. Gbodpfx Ajgbkkrelkol *Larger machines available on request --- Raw material requirements: - Moisture content (atro) must be below 20% - Material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This is the ideal machine for shredding bulky, lightweight aluminium chips or turnings. Not suitable for processing solid aluminium parts. Included features: + Optimized cutting geometry + Customized pusher control + Load-dependent, hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 40x40 mm, multiple cutting edges can be rotated Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as required (15 - 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Shredder height increase by 30 cm (preparation for conveyor belt) + €2,990 net - Angled conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net Gbjdogmh H Tspfx Alkjl (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight, and we will document the test with photos and videos.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, The ideal machine for cable shredding including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting unit opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, hydraulically operated pusher Screen size selectable (15 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double blade row + €995 net (28 instead of 14) - Surcharge for segmented bottom, 4-sided + €3,750 net (prevents pusher blockage; recommended for shredding plastics, paper, veneer under 3 mm thick) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor (discharge height approx. 220 cm) + €8,770 net Gjdpfx Aegmfa Aslkobl - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) Material requirements: - Mineral contamination such as sand, stones, etc. will cause increased wear. We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose, or simply send us your material by freight. We will document the test with photos and videos for you.

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times - Rotor diameter: 260 mm - Control: Omron PLC - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ Gbodpfxed E R D Ss Alkel - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, Mesin ideal untuk penghancuran kayu lunak. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Diameter rotor: 260 mm, Pendorong digerakkan secara hidrolik Lubang saringan sesuai pilihan (12 - 40 mm) Diameter saluran hisap Ø 160 mm Berat sekitar 1.100 kg Dimensi (p x l x t) sekitar 1805 x 1118 x 1650 mm Warna: biru / abu-abu Persyaratan bahan baku: - Kadar air (atro) harus di bawah 30 % - Logam dan kontaminan mineral seperti pasir, batu, dsb. meningkatkan keausan. Godpfx Aswzarcslkobl Kami dengan senang hati menawarkan pengujian gratis menggunakan material Anda. Anda dapat datang ke lokasi kami di Neckartailfingen, atau kirimkan material Anda melalui ekspedisi dan kami akan mendokumentasikan pengujiannya dengan foto dan video.

Tahun pembuatan: 2025, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? Gbsdpfxod N Dn De Alkjl - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, WEISHAUPT GL3 / 1-E, dengan jalur gas - Daya: 90-630 kW - 16-53 kg/jam Gbedjwgyifepfx Alkol - Tahun pembuatan: 2006 - Versi: ZD

Kondisi: sangat baik (bekas), NOMOR KATALOG 7915 DATA TEKNIS lebar poros: 640 mm jumlah pisau: 4 buah ketebalan maksimum elemen yang dikerjakan: 200 mm – dari atas: ratchet/anti-backlash poros pengumpan bergerigi, penarik penekan poros planer penekan poros keluaran halus, penarik Gbsdpfx Ajyrrzpolksl – dari bawah: rol yang dapat diatur di meja bawah: 2 buah motor: 7 kW pengaturan kecepatan feeding secara stepless dimensi (panj/lebar/tinggi): 1800 x 1250 x 1150 mm berat: 1250 kg KEUNGGULAN – buatan Bulgaria – pengaturan kecepatan feeding yang stepless – mesin planer thickness bekas, kondisi sangat baik Harga netto: 9500 PLN Harga netto: 2260 EUR sesuai kurs 4,2 EUR (Harga dapat berubah mengikuti fluktuasi nilai tukar)

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport Gbsdogfm Ryjpfx Alkjl •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: sangat baik (bekas), pl-hu-001 Gbjdpfxsyxr I Ds Alkel

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pabrikan: DEMAG Gsdpfx Aljyu R Dzskebl Kapasitas beban: 860 kg + 630 kg (dilengkapi dengan dua crane) Dimensi teknis yang tepat ditunjukkan pada gambar Rel crane dapat diperpanjang dengan struktur dan kaki yang ditunjukkan pada gambar, namun, elemen rel lain juga diperlukan untuk perpanjangan, yang tidak tersedia!!

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Gbsdpfx Aegl Nlmjlkjl Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, en-GB Gbjdsd Nm Siopfx Alkol

Kondisi: baru, Tahun pembuatan: 2026, en-1 Gedpfx Alsd Hkqhekebl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear Gbedod Nnwljpfx Alkjl --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Special price €990 net (Shipping €14.90 net) Gbsdstqfhxjpfx Alkjl *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Attraction distances for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear Gjdjfci D Aepfx Alkebl --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Gbsdpfxodubpuo Alkjl Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Gbjdjchuvrjpfx Alksl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1961, WMW NILES Lathe Manufacturer: WMW NILES Lathe DLZ 630 Condition: Used Swing Diameter over Bed: 630 mm Feed: Cross: 0.018–1.25 mm/rev Spindle Bore: 70 mm Center Height: 290 mm Spindle Speed: 22.5 – 1120/18 steps rpm Turning Length: 2000 mm Total Power Requirement: 15.0 kW Swing Diameter over Bed: 630 mm Gbedpfx Ajdwfdfolksl Approx. Machine Weight: 4.2 t Transport Dimensions (LxWxH): 4.5 × 1.35 × 1.5 m Swing Diameter over Slide: 340 mm If you need more information, we are here to help! Please contact us via the contact form or give us a call. Your listing has been automatically translated. Translation errors may be possible.

Kondisi: sangat baik (bekas), RNA vibratory feeder with 900 mm diameter, spiral conveyor / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Model: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 rpm Voltage: 220 V Power: 5.4 [unit unclear, likely kVA or kW] Diameter: 900 mm A = Discharge height: 167 mm B = Track width: 50 mm Gbodpoh Iy Ttofx Alkjl D = Bowl diameter: 980 mm H = Bowl height: 250 mm S = Track pitch: 81 mm

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Gbedpfx Asv Rpxlelkel Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.