Beli Mammut 60 Liter Druck-Sandstrahlgerät Mit Quick-Stop bekas (42.654)

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed Ijdpfxewc Afho Afisar - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary.

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit, type "Mammut," with a 100-liter vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excess moisture. For safe operation, our safety shut-off is included. This starts and stops the blasting process when the hand lever mounted on the blasting hose is engaged. The pressure blasting unit is delivered fully operational, space-savingly mounted in a mesh box. Only the compressed air supply must be connected and filled with blasting media. Transport can be carried out conveniently by forklift or pallet truck. A lockable aluminum box is provided for storing protective clothing, spare parts, etc. Scope of delivery: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off - Blasting media sieve - Cover - 10 m blasting hose, ø 25x7 mm, completely assembled - Silicon carbide venturi long nozzle, diameter 6 mm, 8 mm, or 10 mm (selectable) - RED 2 sandblasting helmet - Sandblasting overall, nylon/cotton - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - Breathing air filter/activated carbon filter SAF - Wear part set consisting of: * 100 tear-off foils for RED 2 * 10 inner lenses for RED 2 * 1 blasting hose coupling 25x7 mm nylon * 2 rubber seals for hose coupling * 1 nozzle holder 25x7 mm - Mesh box with hose holder - Lockable aluminum box Technical Data for Pressure Blasting Unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Permanent 1" pipework (internal & external) - Rubber-coated metal cone with gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common media) - Capacity: 100 liters - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Iodpfowc Ri Iex Afisar Mesh Box Dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight including all accessories: 260 kg

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter pressure vessel is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a built-in water separator, which removes moisture from the compressed air to prevent the blasting media from clumping due to excess humidity. For safe operation, our safety shut-off system is included. This starts and stops the blasting process with the actuation of the hand lever, which is mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently installed - Water separator 1 1/4", permanently installed Iodpfx Ajwc Rk Esfiear - SAPI safety shut-off system Technical data - Pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosage valve (suitable for all common media) - Capacity: 200 liters - Total height: 1,420 mm - Vessel diameter: 600 mm - Total diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest shut-on and shut-off times in compliance with trade association regulations (VBG 48) - Pressure can be precisely set before blasting – continuously adjustable from 0.1 to 12.0 bar - Lower media consumption, as the pressure vessel remains constantly pressurized and no unnecessary run-on is required - Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up required → less consumption & less hose wear - No condensate formation in the vessel, as it remains constantly pressurized → no venting or aeration required at each start/stop - Optimum blasting media dosing through hardened fine dosing valve - Reduced compressed air requirement → noticeably lower diesel consumption - One-man operation, as the pressure can be displayed and adjusted directly at the manometer – also possible without starting the machine - No sensitive components such as control valves, membranes, or seals → low-maintenance and reliable - Only the blasting hose at the safety shut-off requires regular inspection and replacement if necessary

Kondisi: baru, The SAPI Mammut sandblasting units with QUICK STOP™ device are powerful industrial sandblasting machines used across various sectors such as automotive, construction, and manufacturing. These units are designed for rapid and efficient surface preparation, cleaning, and treatment of metal, concrete, and other substrates. The SAPI QUICK STOP™ device is a safety feature developed to prevent accidents and equipment damage. It operates by immediately stopping the blasting process as soon as the operator releases the control handle. The abrasive flow is instantly interrupted. This safety system can prevent workplace accidents and protects the machine from stress-related damage. Efficiency and Durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly constructed from high-grade components, ensuring reliable performance even under the toughest conditions. All our machines are fully CE and TÜV certified. Flexibility and Versatility The machine is available in various tank sizes to accommodate different sandblasting requirements. It can be used with a wide range of abrasive materials, from standard sand to specialized plastic or metallic blasting media. Our Mammut with QUICK STOP™ is suitable for numerous applications, including surface preparation, cleaning, and the removal of rust, paint, and coatings. Precision and User-Friendliness Iedpfoupyw Eex Afijar Our Mammut with QUICK STOP™ provides precise control and adjustment of blasting pressure even during operation, enabling consistent results with high accuracy. Additionally, our units feature easily accessible inspection and maintenance ports. Safety The QUICK STOP™ system, equipped with a dead man's switch, ensures maximum safety during sandblasting. QUICK STOP™ also prevents the build-up of moisture inside the machine by maintaining constant pressure, even when blasting is paused. This is not the case with conventional on/off valve technology. All Mammut sandblasting machines with QUICK STOP™ come fully equipped as standard. Our scope of supply typically includes: sandblasting hose, nozzle, pressure regulator, water separator, abrasive metering valve, and basic personal protective equipment.

Kondisi: sangat baik (bekas), Rentang pengukuran X-Y-Z 600 x 600 x 250 mm Ukuran meja 697 x 758 mm Isdpfx Afjxpug Isisar MARCELS MASCHINEN AG

Kondisi: bekas, berat kosong: 6.800 kg, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2005, suspensi: udara, warna: lain, tipe perpindahan gigi: lain, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, nomor mesin/kendaraan: SN48357, Fungsionalitas: berfungsi sepenuhnya, kammerofen-001 Iaodpfetbq Eqsx Afior

Tahun pembuatan: 1995, Kondisi: bekas, UMUM Luas pertukaran: 4,8 m² Tahun pembuatan: 1995 Keterangan: Salah satu pendingin balik tidak memiliki pelat tipe. Pendingin balik memiliki koneksi yang berbeda-beda. Isolasi: tersedia Lokasi: Bremen Pelat tipe: Kondisi: bekas RUANG JAKET Iedpjxqcmlofx Afijar Volume ruang jaket: 210 liter RUANG PIPA Volume ruang pipa: 60 liter

Kondisi: bekas, kapasitas tangki: 12.280 l, UMUM Bentuk konstruksi: persegi panjang Catatan: 2 pelat pendingin di dalam tangki; 1 manhole sekitar 300 x 400 mm di dinding depan; sedikit perbedaan panjang kaki (perlu diperhatikan saat pemasangan) Lebar total: 1.500 mm Tinggi total: 2.970 mm Panjang total: 4.450 mm Pemanas/Pendingin: tersedia Lokasi: Bremen Volume: 12.280 liter Material kontak produk: V2A 1.4301 (AISI304) Kondisi: bekas Penggunaan terakhir: penyimpanan anggur TANGKI Model penempatan: kaki Jumlah kaki: 7 buah JAKET PEMANAS/PENDINGIN Temperatur dalam: pelat pendingin PERLENGKAPAN Pembuangan: DN40 DIN 11851 KARAKTERISTIK MATERIAL Material sistem pendingin/pemanas: V2A 1.4301 (AISI304) Material kaki: stainless steel Iedpsycku Njfx Afiear

Kondisi: baru, Tahun pembuatan: 2026, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Rear stop travel range 180 mm Working height 940 to 1000 mm, adjustable via feet 2 x extraction ports (top in the hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Turntable made of ground nickel steel Saw head with ball-type linear guides for high accuracy, long service life, and high rigidity. The material to be cut can be pre-clamped with low pressure when the hood is open. Hydropneumatic saw blade feed Chip flow directed towards extraction hood. Equipment • Precision under-table circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, infinitely variable • Incl. 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable rear material stop • Extraction device - chip extraction system • Mist spray unit for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600mm • Saw blade not included in delivery! Our NC pusher system ensures that your workpieces are positioned at the desired processing position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions the material. Subsequently, clamping and sawing are initiated. The positions are pre-programmed into the machine’s control system. After processing, the machine automatically moves to the next sawing position. Depending on the workpiece, multiple parts can be clamped side-by-side or stacked for simultaneous positioning. Iodogwt S Topfx Afioar You are welcome to inspect the system at any time in our production/showroom. Please feel free to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: bekas, berat muatan maksimum: 30.200 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 11/2020, inspeksi berikutnya (TÜV): 10/2026, lebar total: 2.550 mm, tinggi total: 3.900 mm, Tahun pembuatan: 2020, Perlengkapan: ABS,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 61.469 h, produsen pengendali: TRUMPF, model controller: TASC 6000, This TRUBEND Cell 5000 featuring the TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, equipped with 6-axis backgauge sensor technology. Ensures highest repeat accuracy thanks to angle measuring technology (ACB) in automated operation. Features a robust all-steel frame, electro-hydraulic upper drive, and modern block hydraulics. The machine is controlled by the TRUMPF TASC 6000 with a 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending tasks. Contact us for further information on this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearings and tilt adjustment • Electro-hydraulic upper drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure scale • Measurement system with glass scale and spring compensation • Hydraulic oil within the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge/stop • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 Iajdpfxjx Imqlj Afisr • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable • Teleservice via modem • Operation • Control panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety equipment • BendGuard safety device for upper tools up to 390 mm • CE marking Additional Equipment • TRUMPF BendMaster automation (standard equipment) • Robot/handling • Stable base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary union for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double-sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operating terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Highest repeatability thanks to angle measuring technology (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, produsen motor: SEW-Motor, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Curved Belt Conveyor, Belt Curve Conveyor, 60 Degree Belt Curve with Drive Manufacturer: Transnorm Year of manufacture: 2020 Condition: used Model/Type: TS 1600-090/60Deg Total external length: approx. 1330 mm Total internal length: approx. 550 mm Dimensions: RN: 600, BN: 600, WN: 60 deg Conveyor width: approx. 600 mm Belt type: Belt with fabric reinforcement Including side guide, 200 mm high Including SEW motor with Moyimpt version 1.1 kW r/min 2900/504 Stock quantity: 3 units Price: per unit Internal article number: 2026032304 Conveyor Technology – Reliable and Immediately Ready for Use The offered conveyor technology was continuously in operation until dismantling and is fully functional. Features: • Condition: fully functional, with typical signs of use • Ideal for efficient and rapid material handling • Professionally dismantled and securely packed for transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to its high-quality workmanship, this conveyor system ensures a consistent and gentle material flow – even under heavy loads. Tailored Solutions for Your Intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your reliable partner. We are happy to assist you with planning, design, and implementation of customized solutions. Upon request, we will provide you with a suitable quotation. Simply let us know your requirements and on-site conditions. Benefit from our years of experience and strong network of professionals. We successfully realise projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Trades • Electronics sector Together, we will develop efficient and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology and complementary systems such as picking racks or container solutions. Iodoywlf Hjpfx Afisar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: SN49983, Fungsionalitas: berfungsi sepenuhnya, en-1 Iodpfx Asx U Ekdofioar

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 32.169 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.320 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 22.000 kg, kapasitas tangki oli: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical data for the baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main ram force: 60 t Pre-pressing force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates: With bulk density of 30 kg/m³: approx. 5.5 t/h With bulk density of 50 kg/m³: approx. 10 t/h With bulk density of 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Isdpfx Afjviwdmjisar Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with wirbulator 1 maintenance platform with access ladder 2 wire stations with deflection pulleys for 10 wire spool racks (without wire) The following repair and overhaul works were performed: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partly resealed - Hydraulic hose on hydraulic block replaced - Wire feed wear tracks at bottom passages welded and smoothed - Tying mechanism cleaned and serviced - Electrical system refurbished, some door switch contacts replaced - Wirbulator repaired - General maintenance performed, lubricated - Machine tested in running mode, without material, in manual and automatic mode (see functional video) Remarks: The plant has already been fully dismantled, stored, and is available at short notice for loading. Documentation (operating manual, CE certificate, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical data or possible errors.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 8.573 h, kapasitas angkut: 2.500 kg, tinggi angkat: 4.590 mm, pengangkatan bebas: 1.500 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.200 mm, kondisi ban: 100 persen, Tipe ban depan: ban superelastis (hitam), tipe ban belakang: ban padat (hitam), Perlengkapan: Pemeriksaan keselamatan UVV, kabin, pencahayaan, de2en001 Isdjx Hpm Hjpfx Afisar

Kondisi: baru, HARGA: 1.800 EUR Mesin ini memiliki keunggulan operasi yang sederhana, mudah dibersihkan dan dirawat, serta stabilitas selama pengoperasian. Cocok untuk pabrik pengolahan daging, restoran, dapur, dan fasilitas katering lainnya. Dimensi: 850×450×850 mm Daya listrik: 0,12 kW Volume: 60 liter Waktu pengiriman: segera setelah pembayaran uang muka (100%) Iajdpfxsikvrdo Afijr

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, New machine 24 months warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant torque transmission + Equipped with ingredient chute and safety guard made of stainless steel + Machine instantly shuts off when the guard is lifted + Integrated dust/splash protection cover Iasdshydmdspfx Afisr + Machine stands on four vibration-absorbing adjustable feet + No floor anchoring required + Hydraulic bowl lift with dual safety switches + Bowl support arms made of stainless steel + Enclosed planetary gearbox made of stainless steel + Optionally compatible with 60-liter accessories + Fast spare parts supply within 1–2 business days STANDARD accessories, included in the price: - 1x 80-liter stainless steel bowl - 1x whisk for 80-liter bowl - 1x flat beater for 80-liter bowl - 1x dough hook for 80-liter bowl SPECIAL accessories, optionally available at extra cost (prices on request): - Additional 80-liter stainless steel bowls - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 80-liter bowls - 60-liter accessory set (1x 60-liter stainless steel bowl + 3 tools for 60-liter bowl) - Bowl trolley for 60-liter bowls Technical specifications: - Motor power: 4.5 kW - RPM at 50 Hz: 133 – 400 (speed levels 1–10) - Circuit protection: 16A CEE plug - Electrical connection: 400V - 3Ph - 50Hz - Dimensions (W x D x H): 720 x 1050 x 1660 mm - Max. height 1910 mm when hood is open - Net weight: 450 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, New machine 24 months warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant power transmission + Includes ingredient chute and stainless steel safety guard + Automatic stop when the guard is lifted + Integrated dust/splash protection cover + Machine stands on four vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift operated by lever + Bowl support arms made of stainless steel + Enclosed planetary gear made of stainless steel + Optionally compatible with 30-liter equipment + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1x 60-liter stainless steel mixing bowl Iasdshydl Iopfx Afisr - 1x whisk for 60-liter bowl - 1x flat beater for 60-liter bowl - 1x dough hook for 60-liter bowl SPECIAL accessories, optionally available at extra cost, prices on request: - Additional 60-liter stainless steel mixing bowls - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 60-liter bowl - 30-liter equipment set (1x 30-liter stainless steel bowl + 3 tools for 30-liter bowl) Technical data: - Motor power: 3.0 kW - RPM at 50Hz: 165 - 450 (level 1 - 10) - Electrical connection: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 690 x 940 x 1470 mm (W x D x H) - Max. height: 1710 mm when cover is open - Net weight: 300 kg

Kondisi: seperti baru (mesin pameran), note-this-is-a-second-choice-product-ii-wahl-new-unused-second-c hoice-means-there-may-be-dust-deposits-minor-scratches-or-dirt-th e-oil-drip-tray-is-designed-for-storing-containers-that-are-not-l eak-proof-or-have-been-partially-used-such-as-paint-cans-paint-bu ckets-cleaning-agents-etc-the-oil-drip-tray-can-be-optimally-plac ed-in-a-shelving-unit-scope-of-delivery-includes-01x-oil-drip-tra y-ii-choice-new-manufacturer-ssi-schaefer-type-oaw-4800-material- finish-sendzimir-galvanized-capacity-approx-60-liters-load-capaci ty-200-00-kg-overall-width-approx-1-020-mm-usable-width-approx-97 0-mm-overall-depth-approx-790-mm-usable-depth-approx-784-mm-overa ll-height-approx-125-mm-usable-height-approx-95-mm-material-thick ness-approx-3-00-mm-weight-per-piece-approx-26-960-kg-your-contac ts-at-our-company-mr-andre-evering-mr-mario-kloever-mr-falk-deuts ch-general-information-on-the-item-this-item-is-offered-for-colle ction-only-transport-or-shipping-can-be-arranged-at-additional-co sts-depending-on-the-destination-and-scope-of-delivery-these-can- be-quoted-upon-request Ijdpfx Afjn Atm Deijar

Kondisi: sangat baik (bekas), CTS Model: CSR-60/810/S Air-cooled Temperature and Climate Conditioning Unit CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system manufactured by CTS GmbH, comprising a conditioning unit (type CSR-60/810/S) and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications—for example, automotive, electronics, component, or material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system by CTS GmbH, consisting of: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance/lifetime testing). Ijdpfjya Ev Nsx Afijar Technical Data (per nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System: Refrigerant: - Pre-cooling stage: R452A (17.0 kg) - Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 | Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (WxDxH): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (WxDxH): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information: The following work is performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change. Errors excepted.) We are happy to answer further questions by phone.

Kondisi: baik (bekas), Tahun pembuatan: 1996, de-01 Iaodpopix Ncefx Afior

Kondisi: baik (bekas), Tahun pembuatan: 1989, jam operasional: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range longitudinal & cross: 0.5 – 5,000 mm/min Rapid traverse longitudinal & cross: 9 m/min Main drive: 30 kW Dimensions of the machine with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT display General Description: CNC manual input control with programming via function and numeric keypad. All data entry in dialog with the screen. Integrated menu navigation and plaintext display of all functions. Control keypad, screen, and handwheel in a separate chip guard hood. The EPL control offers the following possibilities: Programs can be entered and modified without prior programming knowledge, directly by operator guidance through the EPL control. NC programs in ISO/EIA format can be entered and output via serial RS 232 interface, or entered directly by hand. Machining Cycles: Roughing cycles for longitudinal, facing, and contour turning, also with excess allowance. Threading. Undercuts according to DIN 509 Form E and F and DIN 76, and programmable grinding allowances. Axial and radial grooves to DIN 471 and 472, also with bottom finishing. Radii at 90° and chamfers at 45°. Automatic tool nose compensation for cycles, undercut, groove, radius, and chamfer. Programming: Block-oriented, metric/inch, diameter input in absolute mode, radius in incremental mode, full circle programming, subprogram technology with skip levels for program sections. Zero point offset. Operating mode selection via menu. Program input and output: Dialog via menu with operator guidance or direct dialog input. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged-chip conveyor • 12-position VDI 40 tool turret, 6 standard tool positions + 6 driven tool positions • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Ijdpfx Aovr Eh Eefijar DE - 44143 Dortmund - Wambel

Kondisi: sangat baik (bekas), Here we offer a Pfeiffer vacuum pump station for sale. Pfeiffer Vacuum Pump WKP 500 A Model: PP W31 928 / X 2161 Speed: 2800 rpm Oil: P 3 1.5 l S(N2): Theoretical 500 m³/h Weight: 125 kg Motor Type: EELQ-8T Oerlikon Leybold SCROLLVAC SC 60 D Ultimate pressure: 0.01 mbar Motor: 3-phase, 200/400 V, 50/60 Hz Pumping speed (50 Hz): 52 m³/h Pumping speed (60 Hz): 62 m³/h Oil-free High effective pumping speed Low ultimate pressure Low-vibration operation Type: WOD 410 B Condition: used Scope of delivery: (see photo) Iaedsd H Aniopfx Afijr (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Model: C-40/60 CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40 °C to +180 °C Humidity Range: 10% to 98% relative humidity +10 °C to +90 °C in temperature mode +5 °C to +89.5 °C dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal Voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated Current: 13 A Buyer Information for Your Safety! Iasdpfx Aou Hlb Eefior The following steps are performed on the climate chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, replacement with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data!) If you have any further questions, please feel free to contact us by phone.