Beli Mep Shark 282 Nc Evo bekas (5.026)

Kondisi: bekas, Tahun pembuatan: 2006, Sägebandabmessungen 2950x27x0,9 mm 2 Geschwindigkeiten 15-100 m/min Schraubstocköffnung 285 mm Schnittbereich bei 90 Grad: vierkant 220 mm Schnittbereich bei 90 Grad: rund 250 mm Fgsdsyvvm Ejpfx Aaqsb Schnittbereich bei 90 Grad: flach 280x220 mm Schnittbereich bei 60 Grad: rund 120 mm Schnittbereich bei 60 Grad: vierkant 80 mm Schnittbereich bei 60 Grad: flach 140x100 mm Schnittbereich bei 45 Grad: rund 230/200 mm Schnittbereich bei 45 Grad: vierkant 200/170 mm Schnittbereich bei 45 Grad: flach 220x200/200x140 mm Gesamtleistungsbedarf 2,2 kW Gewicht 990 kg Maschinenabmessungen 2500x2230x2050 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Mesin gergaji pita otomatis bekas untuk logam MEP SHARK 282 nc evo Tahun pembuatan: 2011 Dimensi mata gergaji: 2950x27x0,9 mm Sudut pemotongan: dari -45° hingga +60° Empat mode operasi: manual, semi-otomatis dinamis, semi-otomatis, dan otomatis Kecepatan pemotongan mata: dari 15 hingga 100 m/menit Fgjdpfx Aaoykvg Heqsb Kapasitas potong pada 0°: - bulat 250 mm - persegi 220 mm - persegi panjang 280x220 mm Berat mesin: 980 kg Mesin telah sepenuhnya direkondisi.

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: Fgodofg E H Sspfx Aaqsb * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, 001 Fodpfxjyv Nare Aaqegb

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Bekas gergaji pita hidrolik otomatis untuk logam MEP SHARK 332 NC EVO Ukuran pisau: 3320x27x0,9 mm Sudut pemotongan: dari 45° hingga +60° Mode operasi: manual, semi-otomatis dinamis, semi-otomatis, otomatis Kecepatan pemotongan: 15-100 m/menit (inverter) Fsdpfsul Svlox Aaqjgb Kapasitas pemotongan: pada 0° - bulat 300 mm - persegi 260 mm - persegi panjang 330x260 mm Dimensi: 2600x2320x2000 mm Tahun pembuatan: 2011 Berat: 1050 kg Mesin telah sepenuhnya direkondisi dan diuji.

Kondisi: baru, Model designation Shark 282 SXI evo Fjdpfxegvkcte Aaqsgb

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Fgodpfsxaa S Rex Aaqob Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vise opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for full function management * Front right, rotatable - Choice of manual or automatic bow descent * Infinitely variable adjustment of bow lowering speed - Carbide blade guides - Hydraulic blade tensioning with digital value display - 2 x blade speeds - 1 x bi-metal saw blade - 1 x angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Semi-automatic operation: - Electro-hydraulic vise clamping - Electro-hydraulic bow descent - Electro-hydraulic bow lift - Electro-hydraulic vise opening SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device Fgjdpsxaatbefx Aaqob - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baik (bekas), Tahun pembuatan: 2015, Cutting range 300 mm Fjdsy I Da Rspfx Aaqegb Cutting range at 90°: flat 330 x 260 mm Cutting range at 90°: square 260 x 260 mm Cutting range at 45°: round 260 mm Cutting range at 45°: flat 270 x 200 mm Cutting range at 45°: square 250 mm Cutting range at 60°: round 180 mm Cutting range at 60°: flat 170 x 170 mm Cutting range at 60°: square 180 mm Automatic feed 9999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Blade speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (LxWxH) 1800 x 1900 x 1750 mm Current new price approx. 23,000 Euro Special price on request Equipment: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and quick setting of all machine parameters * Additional softkeys + backlit display * 10 programs with up to 9999 pieces and max. 9999.9 mm length each - Material feed with stepper motor and ball screw * Single stroke 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise adjustment of cutting feed rate with indication in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of the cutting start - Large-sized, adjustable steel cast drive wheels - Saw blade tension with tension monitoring and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Vice with quick adjustment * Replaceable clamping and stop jaws - Large, side-mounted swarf tray and coolant tank * Equipped with 2 electric pumps for saw blade lubrication and cooling * Coolant gun for machine cleaning - Swarf cleaning brush for the saw blade - Operating manual in German Manufacturer information: When installing this saw in a network with a residual current circuit breaker (RCCB), it should be all-current sensitive and not less than 300 mA.

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: fungsi terbatas, ketinggian potong (maks.): 230 mm, lebar pemotongan (maks.): 245 mm, tinggi total: 1.680 mm, lebar total: 1.950 mm, berat keseluruhan: 1.000 kg, berat kosong: 1.000 kg, panjang umpan sumbu Y: 500 mm, panjang mata gergaji pita: 2.950 mm, lebar pita gergaji: 27 mm, panjang bagian (maks.): 9.999 mm, kebutuhan tinggi: 2.100 mm, persyaratan ruang panjang: 2.900 mm, lebar yang dibutuhkan: 1.950 mm, panjang meja: 2.800 mm, lebar meja: 245 mm, tinggi kerja: 890 mm, Rincian teknis lebih lanjut tersedia di buku petunjuk penggunaan dan pemeliharaan yang akan disertakan saat penjualan. Fjdpjx Dirzjfx Aaqjgb Jika Anda memiliki pertanyaan lebih lanjut, silakan hubungi kami melalui telepon atau email. Salam hormat, Weber Geländersysteme

Kondisi: baru, Cutting diameter 300 mm Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: round 260 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vice opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1,105 kg Dimensions L-W-H 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally with: * semi-automatic * semi-automatic dynamic * manual operation Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical buttons for saw operations * Ensures reliable operation, simple and intuitive Fjdpfx Asxabavoaqjgb * Real-time monitoring of all cutting parameters * Swiveling arm for convenient and safe operation * Display and logging of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * allows cuts without programming - Safety enclosure for operator protection - Infinitely variable cutting speed from 15 to 100 m/min * via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on opposing ball bearings * Single stroke 600 mm, repeatable for any length - Saw head positioning and feeder movement via joystick - Automatic detection of cut start position - Manual blade tension control with display indication * via electronic converter - Automatic monitoring of cutting load * via servo valve mounted directly to the cylinder - Coolant tray integrated into the base frame - Chip removal brush - Bimetal saw blade for solid and profile material - Tools and operating instructions with spare parts list * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke Manufacturer information – please note: When installing this saw in a power network with residual-current circuit breaker (RCD), it must be all-current sensitive (TYPE B) and rated not less than 300 mA.

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Fgedpfx Aajxaa Eweqjb Blade speed 15 - 100 m/min Vice with 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Control MPE CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H): 1800 x 1900 x 1750 mm Equipment/features: - Heavy-duty electro-hydraulic fully automatic bandsaw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE”-based MEP 50 control and 7” touch screen display * Simple and rapid adjustment of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 parts and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm, repeatable for any desired length * Accuracy of ±0.1/600 mm - Feeder with protective cover and safety limit switch - Precise adjustment of cutting feed with display in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start - Large, adjustable cast steel band wheels - Blade tension with belt tension monitoring and display indication - Carbide blade guides for highest cutting accuracy - Automatic monitoring of cutting load - Quick-adjustable vice * With interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for blade cleaning - Operating manual in German Manufacturer's note – please observe: When installing this saw in a power network equipped with residual current device (RCD), it should be a type B all-current sensitive RCD with a rating not below 300 mA.

Kondisi: baru, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Fgedpfxjfg E Hys Aaqeb Saw blade length: 2950 x 27 x 0.9 mm Blade speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant length of 60 mm. - Maximum cross-section: 230 x 230 mm - Numerically controlled band saws featuring the new Windows “CE” based CNC system, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touch screen display and mechanical keys for the band saw’s operational functions, ensuring reliable performance, intuitive operation, and real-time monitoring of all cutting parameters. - Safety enclosure according to the latest safety regulations of Machinery Directive EN 13898/2007. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron frame (G25) to compensate for vibrations, enhance machine stability, and extend blade life.

Kondisi: baru, Cutting diameter 300 mm Saw band length 3320 x 27 x 0.9 mm Cutting width 300 mm Control NC Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: square 250 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 60 degrees: round 180 mm Fgedefg E H Eepfx Aaqob Cutting range at 60 degrees: square 170 mm Band speed 15 - 100 m/min Total power requirement 2.2 kW Machine weight approx. 1.1 t Space requirements approx. 3.3 x 2.83 x 2.23 m Equipment: - Electrohydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic, and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows for direct cuts outside of series production, without programming - Numerically controlled bandsaw machines, featuring the new Windows CE-based controller developed by MEP specifically for automatic machines - User interface with 7" touch screen display and mechanical buttons for machine operating functions - Infinitely variable cutting speed adjustable from 15 to 100 m/min via frequency inverter - Material feed with stepper motor and ball screw - mounted on counter-opposed ball bearings; single stroke 600 mm - Repeatable for any length required - Automatic monitoring of cutting load - via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Swarf removal brush - Bi-metal saw blade for solid and profile materials - Tools and operating manual including spare parts list

Kondisi: baru, Cutting diameter 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Bandsaw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel on a swiveling arm. - Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display shows: * Diagnostics (messages in the user language) * Alerts (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for each cut * Bandsaw motor power consumption * Bandsaw tension * Bandsaw speed * Numerical display of the saw head position - Switch handle IP55 for manual 24V cycle. - Comprehensive program of all special cutting cycles. - Identification of other possible special cutting cycles for specific applications - New next-generation hydraulic control unit, highly efficient and low energy consumption. - Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min.) with control - Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow feed programmable directly from the control panel for adaptation to material. Fgedsfg E H Ujpfx Aaqjb - Vise unit laterally adjustable left and right, with quick-action vise. - Hand-operated blade tension control with electronic converter display on screen. - Machine base designed to completely collect coolant even at maximum mitre angles. - Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base. - Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication). - Chip-cleaning brush. - The machine is designed for pallet jack transport. - Adjustable length stop for repeated cuts of equal length - Material support arm with roller for attaching a loading platform - Bimetal saw blade for solid and profile material. - Tools and user manual in the respective user language.

Kondisi: baru, Cutting diameter 280 mm Cutting range at 90 degrees: flat 380 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Fjdpfx Asfg E Iajaqjgb Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic functions, for cuts from 45° right to 60° left. Key features: - Swivelling control panel on vertical post - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts - Dual band speed (40/80 m/min.)

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Fgedpfx Aaofg E H Reqob Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: 562670-08-C, Penawaran 25488 Data teknis: - Ukuran pita gergaji: 3320 x 27,0 x 0,9 mm Fjdpfx Aasy E Hv Aeqegb - Kecepatan pemotongan tanpa tingkat: 15 hingga 100 m/menit - Ragum penjepit material hidraulis - Penyesuaian sudut pemotongan: kiri hingga 60°, kanan hingga 45° - Kapasitas pemotongan pada 90°: - bulat: 280 mm - persegi: 260 mm - pipih: 330 x 260 mm - Kapasitas pemotongan pada 45° kiri & kanan: - bulat: 250 mm - 45° kiri pipih: 270 x 200 mm - 60° kiri pipih: 170 x 170 mm - Penggerak: 400 V / 2,2 kW - Sistem pendingin cairan - Sikat pembersih serpihan - Berat: sekitar 1.300 kg - Kebutuhan ruang: sekitar P 1800 x T 1900 x L 1950 mm

Kondisi: diremaj di bengkel (bekas), Gergaji pita pita setengah otomatis bekas MEP Shark 281 sxi evo Tiga mode operasi: setengah otomatis, manual, dan manual dinamis (gravitasi) Ukuran pisau: 2950 x 27 x 0,9 mm Fsdpoyyn Suefx Aaqegb Dua kecepatan pisau: 36/72 m/menit Maksimal bukaan ragum: 285 mm Kapasitas pemotongan: pada 0° bulat 250 mm, persegi panjang 280x200 mm pada 45° bulat 190 mm, persegi panjang 180x180 mm pada 60° bulat 120 mm, persegi panjang 110x110 mm Tahun: 2006 Berat: 435 kg Sudah diservis total.

Kondisi: baru, Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 - 100 m/min Vise opening: 335 mm Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 45°: round 260 / 200 mm Cutting capacity at 45°: square 250 / 180 mm Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170 x 170 mm Total connected load: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Electrohydraulic fully automatic bandsaw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing programming of up to 1000 different cutting programs with varying cut lengths and quantities for identical material dimensions. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button) - Manual or semi-automatic dynamic cycle allows cuts to be made directly, without programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines for technical parameters such as: - Saw blade speed - Number of programmed and performed cuts - Blade thickness - Feed length - Cutting time - Ammeter - Blade tension - Indication of approx. 100 diagnostics and warning messages, all in the operator’s language - Display and recording of alarms and error messages, with the ability to review occurred incidents - Automatic parameter adjustment via control system when a new drive or inverter is installed - Electronic inverter for continuous adjustment of the blade speed from 15 to 100 m/min - Next-generation hydraulic control unit—high performance with low energy consumption Fodpfx Aaeyv Nyleqsgb - New 600 mm material feeding system using stepper motor and ball screw mounted on opposed bearings - Programmable stroke range for the saw arm directly from the control panel to adjust to the cutting material - Electronic blade tension control - Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder - Coolant tray (equipped with 2 electric pumps for lubrication and cooling of the saw blade) integrated into the machine base - Chip drawer (can be replaced by a chip conveyor—see special accessories) - Prepared for installing a minimum-quantity lubrication system for the saw blade (optional), in addition to the standard emulsion oil lubrication system - Chip removal brush - Machine designed for transport by pallet truck - Bi-metal bandsaw blade suitable for solid and profile materials.

Kondisi: baru, Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 250 mm Cutting capacity at 90°: flat 380x250 mm Cutting capacity at 45° left: round 260 mm Cutting capacity at 45° left: square 250 mm Cutting capacity at 45° left: flat 300x200 mm Cutting capacity at 60° left: round 180 mm Fodpfxeyv Ntre Aaqogb Cutting capacity at 60° left: square 170 mm Cutting capacity at 60° left: flat 200x170 mm Cutting capacity at 45° right: round 240 mm Cutting capacity at 45° right: square 210 mm Cutting capacity at 45° right: flat 280x160 mm Saw band dimensions: 3770x27x0.9 mm Vice opening: 385 mm Speed: 40/80 m/min Total power: 1.5/1.8 kW Weight: 695 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic and manual functions. Equipped with MEP-30 control for mitre cuts from 45° right to 60° left. MEP 30 is the latest generation control system. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for cutting - Motor shuts off - Saw head lifts - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to desired position - Cycle start via hand switch - Upper position is saved automatically Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with next-generation microcontroller - Centralised electrical system in the main switch cabinet - Display of alarms, diagnostics and machine functions (cutting time, number of pieces cut, amp draw of saw band motor, saw head position, saw band speed, band tension) - Manual/semi-automatic/dynamic function as standard Additional features: - Low voltage control panel: polyester membrane keypad with thermoformed, raised keys and confirmation signal - Manual cycle switch lever IP55, 24 V - Complete program of special cutting cycles - New hydraulic control unit with low energy consumption. Stand-by mode - Rotary table on roller bearing 420 mm, mounted with preloaded thrust bearing, with interchangeable steel working table - Saw bow stroke programmable directly from the control panel for adapting to the cut material - Clamping device laterally adjustable to left and right, with quick-action vice - Manual band tension control with on-screen display using electronic converter

Kondisi: baru, SHARK282CCS-HU-20240611 Fjdpfx Ajyv Npteaqegb

Kondisi: baru, 2 speeds: 36/72 m/min Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330x260 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170x170 mm Cutting capacity at 45°: round 260/200 mm Cutting capacity at 45°: square 250/180 mm Cutting capacity at 45°: flat 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic-dynamic and manual function. Equipped with MEP-30 control for mitre cuts from 45° right to 60° left. The MEP 30 represents the latest generation of controls. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head raises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via manual push button - Upper position is saved automatically Main features: - Hydraulic unit with solenoid valve, highly efficient and high-pressure hydraulic pump (200 bar) - Electronic machine control with new-generation microcontroller - Centralized electrical system in the main switch cabinet - Display for alarms, diagnostics, and machine functions (cutting time, number of cut pieces, amp draw of saw blade motor, saw head position, saw blade speed, blade tension) - Manual-semi-automatic/dynamic function as standard Fedpfx Aaoyv Nmloqegb Additional features: - Low-voltage control panel: Polyester membrane keypad with thermoformed, raised keys and confirmation signal - Manual 24 V cycle switch handle, IP55 - Complete program of all special cutting cycles - New hydraulic control unit with low energy consumption; stand-by operation - Rotary table on roller bearing, 420 mm, with preloaded thrust bearing, equipped with interchangeable steel worktable - Saw bow stroke programmable directly from control panel to adapt to material size - Clamping device laterally adjustable to left and right, with quick-acting vice - Manual blade tension control with display on screen via electronic converter

Kondisi: baru, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90 degrees: square 320 mm Cutting capacity at 90 degrees: round 330 mm Cutting capacity at 90 degrees: flat 510x320 mm Cutting capacity at 45 degrees left: round 320 mm Cutting capacity at 45 degrees left: square 320 mm Cutting capacity at 45 degrees left: flat 350x320 mm Cutting capacity at 60 degrees left: round 230 mm Cutting capacity at 60 degrees left: square 230 mm Cutting capacity at 60 degrees left: flat 230x310 mm Cutting capacity at 45 degrees right: round 320 mm Cutting capacity at 45 degrees right: square 320 mm Cutting capacity at 45 degrees right: flat 380x320 mm Cutting capacity at 60 degrees right: round 250 mm Cutting capacity at 60 degrees right: square 250 mm Cutting capacity at 60 degrees right: flat 250x320 mm Fgsdsyv Nkkopfx Aaqeb Total power requirement: 4 kW Weight: 1190 kg Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control system for mitre cuts from 0° to 60° left. The MEP 30 represents the latest generation of control systems. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for cutting - Motor stops - Saw head raises – vice opens Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with latest-generation micro-controller - Electrical system centralized in main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor current draw, saw head position, bandsaw speed, band tension)

Kondisi: baru, de-hu-it-lt-001 Fodpfjyv Nfuox Aaqogb