Beli Mesin Pengikat Tepi Kotak Ganda bekas (81.963)

Kondisi: bekas, Tahun pembuatan: 2016, Mesin pelapis tepi otomatis industri SOLUTION XD FITUR UTAMA: SISTEM KONTROL "E TOUCH" DENGAN PEMROGRAMAN OTOMATIS: CUKUP DENGAN "SENTUHAN" UNTUK MENGOPERASIKAN MESIN. PERANGKAT PEMBERI TEKANAN SERI DENGAN SABUK PENGGERAK UNTUK PEMANDUAN PLAT YANG OPTIMAL. PROSES PELAPISAN UNTUK BAHAN ROLL, TEPIN STRIP, DAN TEPIN KAYU PADAT. FITUR UMUM: Mesin pelapis tepi satu sisi dalam konfigurasi sisi kiri untuk pelapisan bahan roll dan tepian strip dengan semua perekat leleh konvensional. Rangka dasar terdiri dari rangka baja yang kokoh dengan kekakuan yang lebih tinggi, yang memberikan tumpuan optimal untuk pemasangan unit pemrosesan. Penekan atas terdiri dari profil baja berdinding tebal dan sabuk penggerak trapesium ganda, yang secara otomatis diposisikan sesuai dengan ketebalan plat. Pengaturan ketinggian dengan tampilan pada penekan atas dan pada permukaan operator. Sistem pengumpanan benda kerja manual dengan jalur kerja berukuran besar dan area tumpuan yang lebih luas memudahkan pengumpanan benda kerja yang besar. Penggaris pengumpanan yang dapat disesuaikan untuk dua posisi dengan pemilihan otomatis untuk pemrosesan dengan atau tanpa unit pemotong awal. Unit kerja atas dipasang pada batang penekan dan terhubung secara mekanis untuk memastikan pengaturan otomatis saat mengganti ketebalan plat. Unit kerja bawah dipasang pada rangka mesin atau pada balok longitudinal, untuk referensi yang presisi terhadap plat. Semua motor frekuensi tinggi dioperasikan melalui konverter frekuensi (Inverter). Setiap unit dilengkapi dengan inverter sendiri, untuk fleksibilitas optimal dan peningkatan waktu produksi mesin. Pelindung untuk semua unit yang diposisikan setelah unit pelapis. Jendela dari polikarbonat memastikan visibilitas yang baik terhadap unit selama pemrosesan. Penerangan interior kabin. Pelindung dengan bahan penyerap suara untuk mengurangi emisi kebisingan selama pengoperasian. Spacer pada penggaris pengumpanan memungkinkan pengumpanan mesin dengan jarak yang tepat. Jarak secara otomatis disesuaikan dengan kecepatan pengumpanan yang dipilih. Saluran penghisap ditempatkan pada panel kontrol yang dapat diputar, diposisikan di area pengumpanan, dan dapat disesuaikan untuk ergonomi yang baik. Sistem kelistrikan sesuai dengan peraturan yang berlaku. Komponen listrik ditempatkan di dalam wadah logam, dipasang pada rangka mesin, dan dilengkapi dengan pintu untuk akses yang mudah jika terjadi perawatan. Tegangan standar adalah 400 V EU 50 Hz (dengan kabel nol). Pengumpanan material dilakukan melalui rantai pengumpan dengan pelat rantai selebar 80 mm yang terbuat dari nilon berlapis karet, untuk pemanduan yang optimal dan daya tahan yang tinggi. Rantai meluncur di atas 2 panduan yang terbuat dari baja yang dikeraskan dan dipoles, satu panduan bundar dan satu panduan datar, untuk menjamin pengumpanan yang lurus dan melindungi dari pergeseran lateral. Pelumasan otomatis rantai. Jumlah oli pelumas dioptimalkan oleh sistem kontrol sesuai dengan plat yang diproses. Jalur rol tumpuan terletak di luar dan diposisikan di sepanjang panjang mesin; terdiri dari sistem pembukaan yang dapat diperpanjang hingga 650 mm (untuk plat dengan lebar maksimum 1200 mm). Sistem kontrol E-TOUCH PC untuk pelaksanaan fungsi utama mesin dengan cepat dan mudah. Termasuk: – Pemrosesan program dalam mode Just in Time – Kemampuan untuk mengelola melalui daftar komponen – Kemampuan untuk mengelola melalui Chjdpfxsxy Tm Ie Anzsb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Numerical Control Smart Touch with Sintra HD Software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height adjustable electronically via CNC Motorized panel feed guide, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors, equipped with dynamic extraction system following the blade movement Flush trimming/chamfering unit with staggered 2 motors, electronically adjustable via CNC Non-stick unit Corner rounding unit with 2 multifunction motors (chamfering + corner rounding) Electronic edge scraper unit, electronically adjustable via CNC Csdpfxswlbxls Anzohb Glue scraper unit Brush unit "SP-501" Automatic return system with bridge discharge Winner 4A

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GA56619, Mesin Penghasil Serbuk Kayu Tipe Kotak Ganda Blue Diamond Chedszwn Ibspfx Anzjb Produsen: Dragon Machinery Ltd, Inggris (merek Blue Diamond) Model: D2-101-240 (Penggerak tertutup) – Kotak Ganda Nomor seri: GA56619 Berat: ~15 ton Jumlah rotor: 4 Diameter rotor: 254 mm (10″) Daya rotor: 45 kW (masing-masing) Kecepatan rotor: hingga 2.816 rpm (maksimum) Motor pengumpan: ~22,5 kW Kecepatan pengumpanan: 1,0–2,5 kaki/detik (dapat disesuaikan) Ukuran kotak kayu: 2,65 m x 0,97 m Rentang diameter kayu: 75–900 mm (hingga 914 mm) Panjang kayu: hingga 2,5 m Total kebutuhan daya: ~180 kW (direkomendasikan 400A, peringkat D, 3 fase + netral) Dimensi keseluruhan: 11.420 x 2.895 x 2.068 mm (P x L x T)

Kondisi: bekas, Tahun pembuatan: 2008, Mesin Bekas Tahun Pembuatan: 2008 Peralatan dan Data Teknis: Ketebalan pelapis maksimum: 8 - 55 mm Pelapisan dengan unit pembulatan maksimum: 45 mm Ketebalan pelapis tepi: 0,4 - 8 mm Ketebalan tepi rol: 0,4 - 3 mm Kecepatan pengumpanan: 12 m/menit Termasuk: panel kontrol yang dapat diputar Unit penggabungan HF dengan 2 motor Termasuk: bak pemanas cepat yang dapat diganti, dilapisi teflon Termasuk: pemosisian elektronik dari rol penekan Cedpfew Nadgjx Anzshb Termasuk: unit gergaji potong ganda yang dapat diputar Termasuk: unit pemotong tepi Termasuk: unit pemotong alur, radius, dan sudut dengan paket penataan (nesting) yang dikendalikan Termasuk: pisau penarik radius dengan paket penataan (nesting) Termasuk: pisau penarik permukaan Termasuk: unit pembuat alur Termasuk: unit pemoles Termasuk: unit penyemprot Ketersediaan: dalam waktu dekat Lokasi penyimpanan: Flörsheim

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 15 mm, 1 Cjdpfsx E A Disx Anzshb

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, panjang total: 7.920 mm, masa garansi: 3 bulan, HOLZ-HER edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Chedpox Emf Dofx Anzob Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Switching PUR glue and cleaning the system is quick and easy within a few minutes. Axis adjustment via ultra-precise, high quality servomotors. Special features for materials with protective foils, such as high gloss and super matt surfaces! One of the machine's absolute highlights is the multifunction package, which shows its strengths in workshops processing many different types of edges. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on application — from the longitudinal milling unit to corner copying up to the profile scraper. The extendable workpiece support and extended feed-in area assist with large workpieces, while a guide device helps to feed smaller parts into the machine. Edge thickness, rolls: 0.4 – 3 mm (material dependent) Edge thickness, strips: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet in EVA and PUR quality, with minimal effort. Processes all common edge types up to high gloss & super matt, as well as solid wood edges up to 15 mm. iTronic — pressure and adhesive quantity control Prepared for integration with RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid setting of radius, flush, and chamfer Spraying devices vertical & horizontal and much more. Delivery, installation, and operator training can be arranged by us for an additional charge. The machine is currently in our dispatch warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall apply. Our General Terms & Conditions can be found on our website at holzher.de/de/agb.

Kondisi: bekas, 1 Chodpfx Anowtfvkozob

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.400 mm, panjang total: 4.000 mm, lebar total: 1.200 mm, MESIN PELAPIS TEPI OTT ATLANTIC 2 MATA GERGAJI HM 140X3,2X16 Z=36 FRESING RATA DENGAN 2 KEPALA PISAU BOLAK-BALIK HM Chedpoww H Enjfx Anzsb FRESING HALUS DENGAN 2 KEPALA PISAU BOLAK-BALIK HM SCRAPER 2X HM, PENYEDIAAN OTOMATIS PEMBERSIHAN TEPI - SIKAT BEROSILASI PANJANG MESIN 4,50 M

Kondisi: baru, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to achieve perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. Features include a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, crosscut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a flat scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application to the workpiece for edge material up to 3 mm Jointing cutter (including diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change preparation including glue drainage device HF crosscut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and indexable insert cutter (combination version) Robust chain drive Csdpfx Anel D Rp Ejzshb Double roller overhead pressure with ball bearings Inspection window on rear side of the machine Extendable workpiece support Including special equipment: F2/12 flat scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach Chjdpfxsv Sv Enj Anzob

Kondisi: bekas, nomor mesin/kendaraan: 008729, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem perekat: EVA Unit perata atas: ya Kecepatan penggerak maksimum: 40 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 8 unit Codpfozylv Iox Anzjhb

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Cedpfxjxyiilo Anzshb

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Chodpfx Ansvvkfdozeb Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baik (bekas), Tahun pembuatan: 2015, nomor mesin/kendaraan: 0-200-24-0779, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 55 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, panjang total: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left side. Year of manufacture: 2015 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit - Maximum workpiece thickness: 60 mm Chjdpjztl Scsfx Anzob - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming, climb/contra-rotation, 2 x 4 kW, usage-controlled Horizontal positioning via NC motor (CAN) GLUING UNIT A20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA adhesive - Capable of processing both EVA and PUR adhesives - Edge magazine: min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered and 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 cross-cutting unit, horizontal, 2 motors each 0.8 kW (front/rear edge), for chamfer/straight as well as excess edge trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 profile trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled via control panel Various interchangeable heads equipped with tools - Universal trimming unit 3.5 kW, controlled - Multi-profile scraper top/bottom - Flat scraper top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Kondisi: baik (bekas), Tahun pembuatan: 2002, Edge banding machine with jointing milling, otherwise fully equipped, PU adhesive can be used. Chsdpfx Ajgmn H Aenzjb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: CA.03.013.12, jam operasional: 1.555 h, Edgebanding machine FELDER G400 from trade-in – used condition as received from the customer. The machine has been function-tested – see video. Cjdong H Uvopfx Anzshb Glue scraper (optional) is installed.

Kondisi: bekas, Tahun pembuatan: 1989, Mesin bekas Tahun pembuatan: 1989 Kondisi: Telah diuji fungsinya Perlengkapan dan data teknis: Ketebalan edge band maksimal: 20 mm Tinggi edge band maksimal: 51 mm Cedpfx Ajw I U E Ajnzjhb Ketebalan material roll maksimal: 3 mm Panjang benda kerja minimal: 140 mm Lebar benda kerja minimal: 60 mm Sistem lem: 1906 Cartridge Unit penekan Unit frais 1920 – frais rata & miring hingga 20 mm Kebutuhan ruang (P x L x T): 3150x1800x1375 mm Berat sekitar: 800 kg Lokasi: Flörsheim Ketersediaan: Segera

Kondisi: bekas, Tahun pembuatan: 2001, Laitteen reunalistan ja kappaleen mitta- ja varustetiedot, varastopaikalla Nattheim. Chsdpfsvvkfqox Anzob

Kondisi: sangat baik (bekas), Adhesive applicator Guillotine Crosscut saws Cedsttu Riepfx Anzjhb Milling machine (or Router, depending on context) Scraper Polishing machine

Kondisi: seperti baru (mesin pameran), Exhibition machine edgebander 5 units: Jointing cutter unit incl. AIGNER diamond jointing cutterheads, with DIA replaceable knife system Konstantin and controlled edge air blast nozzle behind the second jointing cutter. Cross-cut saw unit with 1 motor, 2 saw blades Radius milling unit, with Easy Set adjustment system Radius scraper unit, extendable and retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-sided usable scraper knives. The unit is extendable and retractable. General equipment: - High gloss package: roller sensing for radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and protective cabin for all units and the glue pot - Teflon-coated glue pot with energy-saving standby mode Chedow Rcmyjpfx Anzjb - Glue roller with feed screw for long and high workpieces - Pressure zone with motor-driven first steel pressure roller + one rubber roller - Roll shears for edges 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction nozzles: 3 x 150 mm Connection: 8 kW - 400 V / Compressed air: 6 bar

Kondisi: bekas, nomor mesin/kendaraan: 008019, de-txt-001 Cjdpfxswvq E No Anzjhb

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Chjdjvvkfwjpfx Anzeb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Brandt Optimat KDF 420 Mesin Perekat Tepi Kontrol Powercontrol PC 20 Ketebalan pelapisan 0,4–8 mm Tinggi pelapisan 8–60 mm Csdpfx Ajx Dzw Nenzehb Pengerjaan pra-potong dengan mata pisau DIA Pemotongan Trimming & milling radius Pisau penarik radius Pisau penarik permukaan Unit pemoles Panjang mesin 4360 mm Manual pengoperasian dan alat Tahun produksi 2008 Harga 15.000,-

Kondisi: bekas, nomor mesin/kendaraan: 008519, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem perekat: PUR, laser Pembuatan alur sambungan: ya Unit multifungsi: ya Unit mesin frais atas: ya Csdozruytspfx Anzjhb Kecepatan umpan maksimum: 40 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 12 unit

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, IMA COMBIMA 2013 Chedpfxstxtkxe Anzsb - 2x Be- und Entladestation - für PVC-, ABS- und Massivholzkanten - U-förmige Anordnung - mit KFA 20 Aggregat - sofort verfügbar Für weitere Informationen, Video und technische Daten kontaktieren Sie uns bitte.