Beli Mixer Untuk Butiran Plastik bekas (33.044)

Kondisi: baru, New device MASS International Color mixer / batch mixer Mixer for plastic granules Available at short notice from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (incl. control panel: 1250 mm) Mobile on lockable swivel casters Double-sided extraction port for suction lance, additional discharge port at the bottom, Safety switch on inlet cover and discharge port, Height adjustable in 25 mm increments, Viewing window for fill level monitoring Control via control panel Interval and continuous mixing adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate. Ideal for blending in additional components, such as color masterbatch, additives, fillers, etc. Lhsdpfx Asu Ti Tvsl Nji Thanks to the forced guidance by the screw sleeve, the entire plastic granulate is set in motion in the mixer and is completely and quickly blended with the added components. There are no “dead” corners left unmixed, as is often the case with conventional screw or paddle mixers.

Kondisi: sangat baik (bekas), Produsen: ARBURG Lhsdpfjx Eirwsx Al Nsi Model: Allrounder 270-S-400-70 Tahun produksi: 2010 Nomor seri: 214269 Sistem kontrol: Sistem kontrol: Arburg Selogica Direct Panel operator: terminal operator Lemari kontrol: lemari kontrol dan daya lengkap Parameter unit penutup: Gaya clamping: 400 kN Parameter unit injeksi: Diameter screw: 18 mm Sistem penanganan produk: Produsen: ARBURG Tipe: Multilift Jumlah sumbu: robot penanganan 3-sumbu Transportasi cetakan: Konveyor siklus – pj./lb.: 2.000 × 800 mm

Kondisi: baik (bekas), Mesin Kemper ST 75 Ljdozmuypopfx Al Nshi - Bekas - Telah diperbaiki - Kondisi teknis baik - Pengambilan di gudang/tersedia opsi pengiriman - Harga berdasarkan permintaan

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Drying system / dryer suitable for various materials such as powders, granulates, etc. - Control unit for temperature regulation This machine is installed and ready for testing in our machine hall. Lhjdpfx Aoqu R Nael Noi

Kondisi: baik (bekas), Tahun pembuatan: 1994, Arburg Thermonic Pengatur Suhu (Model SI FF 10 G250/300) Lsdpfx Aezl Sbnsl Nshi Perangkat ini dilengkapi dengan kenop putar analog untuk mengatur suhu target dalam Celsius dan Fahrenheit (rentang 50°C hingga 450°C), serta tiga indikator LED untuk memantau penyimpangan suhu.

Kondisi: siap digunakan (bekas), Shredder plastik dengan daya 45 kW, dapat mencacah plastik film dan jenis plastik lainnya menjadi potongan kecil. Shredder ini juga dilengkapi box soft start. Lhjdpfxsxf Txzo Al Nji

Tahun pembuatan: 2022, jam operasional: 2.000 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan unit filter Ulmatec FES 20-35-4 baru ini untuk penyedotan kering, yang dirancang untuk aluminium/plastik, dengan tahun pembuatan 2022. Lhsdjzlr Dcepfx Al Nsi Produsen: Ulmatec Model: Unit Filter Selang FES 20-35-4 Tahun Pembuatan: 2022 Kondisi: seperti baru Jenis: Penyedotan kering untuk aluminium/plastik Nomor Kategori: 376 Jika Anda memiliki pertanyaan lebih lanjut atau membutuhkan informasi tambahan, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: bekas, Tahun pembuatan: 2012, Automated system / Application areas: chrome plating, nickel plating, copper plating / Programs: pre-cleaning, pretreatment, metallization, post-treatment / Base materials: ABS and ABS-PC / Technical data: goods window per goods carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per goods carrier, cycle time 3.00 min. system, cycle time 2.50 min. demetallization / Capacity: 20 goods carriers per hour, clear distance anode/anode chrome 700 mm, copper 700 mm, nickel 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm width, tank dimensions (rinsing) 3100 mm x 700 mm, / Power consumption: drives: transport system 133 kW, filters 194 kW, exhaust ventilation 229 kW, wastewater treatment 150 kW, switchgear 704 kW, rectifiers approx. 3190 kW, heating energy approx. 1410 kW / Consisting of: automatic loading system with 135 goods carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, plating baths, and exhaust air system made of chemically resistant plastics, NOTE: Various continuous extensions and modernizations of the plastics electroplating plant since 2015! Lhsdpfjy Rvtuex Al Noi

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Oven for Plastics Processing This oven is suitable for processing thermoplastics. Manufacturer: Reinhardt Model: VL Year of manufacture: 1991 Serial no.: 8182 Connected load: 50.2 kW Voltage: 380 Volt Lhsdozkhm Repfx Al Nei Operating temperature: 50 - 200 °C Trolley dimensions approx.: 2000 x 1200 mm (W x D), 500 mm opening

Kondisi: baik (bekas), Mesin pengisi ini digunakan untuk mengisi ember madu 3 liter. Dapat disediakan dengan mesin penutup ember GlobeTech dengan biaya tambahan, yang bekerja secara inline dengannya. Lhedpfxopfdhpe Al Nsi

Kondisi: baik (bekas), Fatosa Z mixer lengan dengan loader untuk tote bin. Langsung dari pabrik daging Inggris yang telah tutup. Ledpfx Alsyzbi Nj Njhi

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), lebar kerja: 620 mm, nomor mesin/kendaraan: SE 01510 A10, HP60/40 Heating Element Welding Machine by BRANSON Lsdpfxjykvdlj Al Njhi Drive system is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Low operating hours (approx. 6,800 hrs). Usable heating element area: Width 600 mm x Depth 400 mm Max. workpiece dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. part height (top): 350 mm - Max. part height (bottom): 350 mm (Combinations of part heights possible, depending on contour) Max. process temperature for contact welding: 400°C. The machine’s modular frame design allows for easy modifications. Side doors and the front door in the welding area can be easily opened for quick changeovers. The automatic safety lift door ensures a high level of operator safety. Temperature controllers on the operating panel are equipped with actual/target displays. The operating terminal is a Siemens PLC control panel. Machine is controlled via Siemens PLC (S7-300 control system). Heating elements are equipped with temperature sensors for precise temperature control and safety shutdown in case of overheating. The pin systems in the tool clamping areas enable reproducible fixture positioning. Advantages of heating element welding technology: - Secure welding of workpieces with low or varying wall thicknesses is possible. - Low rejection rate due to dimensionally accurate and reproducible welds. - Precise timing, temperature control, and force dosing allow even sensitive parts to be welded. - Nearly all thermoplastics can be welded with this method. - Different types of plastics can be welded together (compatibility must be checked). Technical data: - Power supply: 3 x 400 V AC + N + PE - Power rating: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 (power lines) x 6 mm² each - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with control panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (door open) Machine weight: approx. 2,200 kg

Kondisi: bekas, Tahun pembuatan: 2013, Kersting plastic chain conveyor, conveyor belt, inclined conveyor GF 3350-720-620 with drain tray for cleaning RA1974 Technical data: Conveyor length (NL): 3350 mm Frame width (NB): 720 mm Belt width (GuB): 620 mm Height/Conveyor path (BH): rising from 920 mm to 1250 mm +/- 50 mm adjustable height Number of support legs: 2 pieces Conveying speed (v m/s): please contact us for required speed Drive: SEW gear motor Electrical data: 400 V / 50 Hz / 0.37 kW Belt: plastic chain Year of manufacture: 2013 Special features / accessories: Drain tray for collection of cleaning water runoff All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please feel free to contact us. You can reach us by phone or email. We are happy to assist you with the planning and realization of your projects. Ljdpfok Abpasx Al Njhi We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, panjang total: 1.010 mm, lebar total: 630 mm, tinggi total: 1.220 mm, kapasitas tangki: 80 l, berat kosong: 320 kg, daya: 3,75 kW (5,10 hp), sekring listrik: 16 A, New machine with 24 months warranty Advantages: + Robust construction + Bowl, central shaft, and spiral made of stainless steel + Driven by two separate motors (spiral & bowl) + Mobile unit, mounted on swivel castors, with fixed bowl + Flour dust cover closes gently with dampers, featuring automatic shut-off + Protective cover for the adjustment feet + Short kneading times with excellent results + Control panel with push buttons for easy operation, equipped with 3 time switches + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be stored + Switch for manual or automatic operation + Fast spare parts supply within 1-2 working days Machine in stainless steel version: - Surcharge: + €2,080 net Technical data: - Flour capacity: 4 – 30 kg - Dough capacity: 6 – 50 kg - Bowl volume: approx. 80 litres - Bowl outer diameter: 585 mm - Motor power: 3.75 kW (kneading spiral & bowl drive) - RPM at 50Hz (1st / 2nd gear): 135 / 270 - Electrical rating: 400V – 3Ph – 50Hz – 16A CEE plug Ledpfxjhyc Ths Al Nshi - Dimensions in cm: 63 x 101 x 122 (W x D x H) - Height with flour dust cover open: 160 cm - Height to top edge of bowl rim: 79 cm - Net weight: 320 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, tegangan masuk: 400 V, panjang total: 810 mm, lebar total: 560 mm, tinggi total: 1.130 mm, kapasitas tangki: 40 l, berat kosong: 140 kg, daya: 2,2 kW (2,99 hp), New machine with 24 months warranty Advantages: + Robust construction + Bowl, central shaft, and spiral made of stainless steel + Spiral and bowl driven by a single motor + Mobile machine on swivel casters with fixed bowl + Flour dust cover closes smoothly with dampers, equipped with automatic shut-off + Dirt protection covers for support feet + Short kneading time with excellent results + Control panel with push buttons for easy operation, featuring 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be stored + Selector switch for manual or automatic operation + Fast spare parts supply within 1-2 working days Machine in stainless steel version: - Surcharge: + €1,400 net Technical data: - Flour capacity: 2 - 15 kg - Dough capacity: 3 - 25 kg Lhsdpfxshyc Tao Al Nei - Bowl volume: approx. 40 litres - Bowl outside diameter: 480 mm - Motor power: 2.2 kW (spiral & bowl drive) - RPM at 50Hz (1st / 2nd gear): 140 / 280 - Electrical connection: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions in cm: 56 x 81 x 113 (W x D x H) - Height with flour dust cover open: 140 cm - Height, top edge of bowl rim: 76 cm - Net weight: 140 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, panjang total: 1.080 mm, lebar total: 680 mm, tinggi total: 1.280 mm, kapasitas tangki: 95 l, berat kosong: 350 kg, daya: 4,87 kW (6,62 hp), sekring listrik: 20 A, neumaschine-24-monate-garantie Lhsdpfx Ashyc Tpsl Nei

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, panjang total: 123 mm, lebar total: 750 mm, tinggi total: 1.320 mm, kapasitas tangki: 130 l, berat kosong: 390 kg, daya: 5,25 kW (7,14 hp), de-hu-001 Lsdjhyc Twopfx Al Nehi

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, panjang total: 1.330 mm, lebar total: 830 mm, tinggi total: 1.400 mm, kapasitas tangki: 200 l, berat kosong: 610 kg, daya: 6,55 kW (8,91 hp), sekring listrik: 32 A, New machine with 24 months warranty Lhedohyc Tzjpfx Al Noi Advantages: + Solid construction + Bowl, central bar, and spiral made of stainless steel + Drive with two motors (spiral & bowl) + Mobile machine on swivel casters, with fixed bowl + Flour dust hood closes gently with dampers, featuring automatic shut-off + Dirt-protection cover for supporting feet + Short kneading time with excellent results + Control panel with push buttons for easy operation, includes 3 time switches + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be stored + Switch for manual or automatic operation + Fast spare parts supply within 1-2 working days Special accessories, optionally available at extra charge: Soft starter - Machine can be operated with 16A instead of 32A Extra charge: + €990 net Technical data: - Flour capacity: 6 - 75 kg - Dough capacity: 9 - 120 kg - Bowl volume: approx. 200 liters - Bowl outer diameter: 825 mm - Motor output: 6.55 kW (kneading spiral & bowl drive) - RPM at 50Hz (1st / 2nd speed): 110 / 220 - Connection rating: 400V - 3Ph - 50Hz - 32A CEE plug - Dimensions in cm (W x D x H): 83 x 133 x 140 - Height with open flour dust hood: 192 cm - Height upper bowl rim: 90 cm - Net weight: 610 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, daya: 8 kW (10,88 hp), panjang platform: 4.100 mm, berat keseluruhan: 2.850 kg, panjang transportasi: 5.700 mm, lebar transportasi: 1.330 mm, tinggi transportasi: 1.300 mm, tinggi konstruksi: 1.300 mm, Perlengkapan: Penandaan CE, Mesin las butt welding lembaran plastik WORK SP 4000 CNC diproduksi oleh perusahaan Ceko METAL WORKING CZ, s.r.o.. Dibuat tahun 2014, dalam kondisi sangat baik, dengan lapisan teflon cadangan. Ini adalah peralatan industri berteknologi tinggi dengan kontrol CNC, dirancang untuk pengelasan presisi pada lembaran dan papan termoplastik. Parameter teknis utama dan karakteristik dari seri mesin ini meliputi: Parameter Teknis Utama - Lebar kerja maksimum (panjang pengelasan): 4000 mm, memungkinkan pemrosesan lembaran plastik berukuran sangat besar. - Ketebalan material yang dapat dilas: Biasanya antara 2 mm hingga 25–30 mm (tergantung pada model dan jenis plastik). - Material kompatibel: Lembaran termoplastik dari PE (polietilena), PP (polipropilena), PVDF (poliviniliden fluorida), dan PVC (polivinil klorida). - Tipe pengelasan: Butt-welding dengan elemen pemanas menggunakan metode hot plate/heated element welding. Kontrol & Fungsi CNC - Siklus sepenuhnya otomatis: CNC mengendalikan seluruh tahapan proses pengelasan secara presisi, mulai pemanasan, waktu transfer, tekanan pengelasan, hingga waktu pendinginan. - Database material: Sistem dengan parameter pengelasan yang sudah diprogram sesuai standar internasional (misal standar DVS untuk pengelasan plastik). Lhjdpfxezdiz Nj Al Nji - Pencatatan data: Otomatis menghasilkan dan mencatat protokol pengelasan untuk kontrol kualitas (berisi informasi tekanan, suhu, dan durasi siklus). Keunggulan Konstruksi - Stabilitas mekanik tinggi: Rangka baja kokoh memastikan tekanan merata sepanjang papan 4 meter. - Sistem hidrolik: Pengaturan tekanan presisi menjamin hasil las homogen tanpa tegangan internal. - Pelapis Teflon: Pisau panas dilengkapi pelapis anti lengket berkualitas tinggi untuk kemudahan pembersihan dan mencegah kerusakan material. Spesifikasi: - Panjang: 5700 mm - Lebar: 1330 mm - Tinggi: 1300 mm - Berat: 2850 kg - Panjang kerja: 4100 mm - Tinggi kerja mesin: 950 mm - Ketebalan minimum lembaran plastik: 4 mm - Ketebalan maksimum lembaran plastik: 40 mm - Daya mesin: 8 kW - Tegangan listrik operasi: 3 PEN 50Hz 400/230V - Konsumsi udara: 0,8 m³/h - Tekanan pneumatik minimum: 0,8 MPa - Tekanan pneumatik maksimum: 1,0 MPa - Standar peralatan listrik: EN 60204-1 - Standar teknis lain: Lihat Bab 3.3 pada manual - Tingkat kebisingan maksimum: 70 dB Jika Anda memiliki pertanyaan lebih lanjut atau membutuhkan informasi tambahan, silakan kirim pesan atau hubungi kami.

Tahun pembuatan: 2014, Kondisi: bekas, Baujahr: März 2014 Neu: Nein Lhsdpfev Rn N Aex Al Nsi Seriennummer: 1086683 Kompletter Tank für Kühlaggregat, aus einem Schmitz Cargobull entnommen, guter Zustand.

Kondisi: siap digunakan (bekas), Spesifikasi teknis mesin press Dixi 60 AUTOMAT Bukaan pemuatan (L x T): 1550 x 1000 mm Daya penggerak: 31,5 kW Gaya tekan: 60 t Berat bal (tergantung material): 350–600 kg Dimensi bal (L x T x D, dapat disesuaikan): 1100 x 800 x 300–1600 mm Waktu press/siklus: 13/24 dtk Lhedjv Amw Nopfx Al Noi Berat mesin: 7000 kg

Kondisi: baik (bekas), Pencampur aspal Ljdpfxex U T T Tj Al Njhi Kapasitas: 400 ton/jam

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Parts should be max. approx. 500 x 500 mm* *Height is less critical Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Ljdpfx Asd H R Sxjl Njhi Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Tahun pembuatan: 2025, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Ledpfx Alod N Dn Do Njhi Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful.

Kondisi: bekas, - Dimensi: 1420x1360x1390 mm - Kapasitas tepung: 75 kg Lhodpfxjwxvkvs Al Nsi - Kapasitas adonan: 120 kg - Intake air: 45 L - Model: PX25 - Kontrol otomatis - 2 kecepatan - Daya: 5,15 kW - Tegangan: 380 V - Berat: 400 kg