Beli Presona Ab Baler Dengan Flap Pra-Tekanan Lp 50 Eh1 bekas (49.016)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, daya: 22 kW (29,91 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 530 m³/jam, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 pieces (as of April) Main press force: 50 t Specific pressure: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, variable length Drive power: 22 kW Pedpfxey R Npie Anwspt Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 l PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the Baler: The machine has been partly overhauled in our workshop and general maintenance work has been carried out. Upon completion of the refurbishment, the baler was tested during operation and is now ready for immediate sale. The following refurbishment work has been carried out: General work: - Machine cleaned, derusted, primed, partially repainted - Wire feed marks in the feed channel welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, refilled with new oil - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Program menu language set to English - Two key switches in the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Electrical system of the agitator replaced, connected, and tested Press ram: - All four rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled, cylinder tube honed, all seals replaced, leak test conducted - All plastic wear blocks on the press ram replaced Pre-press flap: - Both bearings on the shaft of the pre-press replaced - Both hydraulic cylinders disassembled, overhauled, both cylinder tubes honed, all seal kits replaced, leak test conducted - Scraper flap on the pre-press replaced Tying system: - Two complete needles with wire redirect rollers replaced - Needles adjusted and set - All wire redirect rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the twister, under the twister fingers, replaced Scope of delivery: Only the baler is being sold. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is fully available. Inspection possible by appointment. We do not accept liability for the technical information and possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Psdpfoy S Ru Aox Anwopt Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, jam operasional: 30.143 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 570 kg, berat keseluruhan: 20.000 kg, kapasitas tangki oli: 600 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 800 m³/jam, en-1 Pjdpfx Aney S Rtljwopt

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 24.629 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.650 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 900 kg, berat keseluruhan: 24.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), laju aliran volumetrik: 1.350 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 10.000 mm, en-001 Psdpeymmmpofx Anwopt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 37.656 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 85 t, lebar bukaan pengisian: 1.500 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 650 kg, berat keseluruhan: 25.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2024, laju aliran volumetrik: 410 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 9.300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for the accuracy and completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale size: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight (press): approx. 25 t Note: Ppjdpfov T I Evex Anwot The machine was used by a recycling company for compaction of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed in the last 3 years. The machine has been regularly maintained. We would be pleased if this baler is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.900 h, nomor mesin/kendaraan: LP50VH2, Used Presona LP50 VH2 baler in good working condition with conveyor belt Technical data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7–9 t/h - 50 kg/m³ = 8–9 t/h - 100 kg/m³ = 11–14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm Pedpfx Aneyrhi Njwept - Loading chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank volume: 600 l - Electric motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Baler, control cabinet, operating panel, and conveyor belt for sale. Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection possible by appointment. We accept no liability for technical information or possible errors. Video footage can be provided upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Bale Press Presona LP 85 VH2 with cross-binding, year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Pedpfx Aoyz Snpsnwspt Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1200 m³/h Throughput at 30-100 kg/m³: 13-30 t/h Tying: 5x vertical, 3x horizontal Hydraulic tank capacity: 2,000 L Transport dimensions press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The press has been dismantled from ongoing operation. Technical documentation is available. Please note: All technical data refers to information provided by the manufacturer. We assume no liability for the correctness or completeness of the given details or for possible errors. This offer is subject to prior sale, is non-binding, and may be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 13.209 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.050 mm, lebar bal: 100 mm, tinggi bal: 700 mm, berat bal: 500 kg, berat keseluruhan: 8.500 kg, kapasitas tangki oli: 400 l, daya: 15 kW (20,39 hp), tahun perombakan terakhir: 2026, laju aliran volumetrik: 108 m³/jam, Technical Data – Baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (corresponds to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 pieces Pressing force: 50 t Specific pressing force: 650 kN/m² Fill chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates with bulk density of: - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour Ppsdpfxsy R Npcj Anwjt - 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 l PLC control: Siemens S7-200 Effective transport dimensions (press only): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (press): 8.5 t Condition of the baler: The baler was used in an operational production environment exclusively for compacting cardboard, and has been serviced regularly. With only 13,209 operating hours, the machine has relatively low hours. The baler has been partially overhauled and thoroughly tested in our workshop. The following overhaul work has been completed: - Machine cleaned - Bale retaining claws freed up and lubricated - Photoelectric sensor replaced - Twister unit fully dismantled, disassembled, all bearings replaced, all plastic guides replaced, lubricated, chain tension adjusted - Knives and counter-knives dismantled, sharpened, and reinstalled - Knife gap readjusted - General maintenance work carried out and lubricated Scope of delivery: - 1 x baler with wire spool boxes (without wire) (6850 x 1950 x 2650 mm) - 1 x bale chute (5100 x 1150 x 450 mm) - 1 x wire reel box for floor-mounting (1450 x 380 x 360 mm) For transport of the baler, a tautliner with an effective internal height of 2700 mm is required. Remarks: A complete set of documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 1986, Single-column eccentric press, single-column press, automatic punching press, single-column eccentric press, eccentric press, single-column press - Manufacturer: Heilbronn, Single-column eccentric press type NEPD 50 - Pressing force: 50 t Ppedji Agynspfx Anwjt - Clutch: pneumatic - Stroke: adjustable 8 – 100 mm - Table size: 500 x 650 mm - Table cut-out: Ø 240/100 mm - Throat depth: 255 mm - Punch holder: Ø 40 mm - Insertion height: 355 mm - Dimensions: 1800/1080/H2260 mm - Weight: 3050 kg

Kondisi: baru, Drilling capacity in steel (diameter): 60.0 mm Thread cutting: M 42 Throat: 350 mm Drilling stroke: 200 mm Speed range: 60 – 1530 rpm Table dimensions: 720 x 510 mm Drill spindle Morse taper: 4, short taper Pjdpfoxabgisx Anwopt Column diameter: 200 mm Feed rates: 0.15 – 0.2 – 0.3 – 0.36 mm/rev Distance spindle / table: 159 / 884 mm Motor power: 3.6 / 4.3 kW Weight: 605 kg Machine height: 1950 mm Equipment: - Automatic feed with electromagnetic feed clutch - 4 feed rates: 0.15 / 0.2 / 0.3 / 0.36 mm/rev - Stepless speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electric interlock - Digital speed display - Machined base plate Including special equipment: - Coolant system mounted in base, pos. 24 - Thread cutting device, pos. 20.0 - LED machine lamp, pos. 12.

Kondisi: baik (bekas), Tahun pembuatan: 1982, nomor mesin/kendaraan: 340, Penawaran 25032 Data teknis: - Kapasitas pengeboran pada baja ST 60: 50 mm - Kapasitas pengeboran maksimal pada baja ST 60: 65 mm - Peralatan tapping benang hingga: M 60 - Dudukan spindle bor: MK 5 - Stroke spindle bor: 240 mm - Jangkauan: 400 mm - Meja dengan 2 alur-T: 720 x 560 mm - Jarak maksimum antara meja dan spindle bor: sekitar 850 mm - 4 langkah pemakanan: 0,1 - 0,2 - 0,3 – 0,4 mm/putaran - Transmisi variabel tanpa tingkat dengan gearbox perpindahan - Kecepatan putaran spindle bor dapat diatur tanpa tingkat: 40 – 1600 rpm - Penggerak: 400 V / 5,5 kW - Dimensi ruang yang dibutuhkan kira-kira: L 850 x T 2480 x D 1350 mm - Berat kira-kira: 1450 kg Podpfx Aoyk Dp Nonwjpt

Kondisi: baik (bekas), Manufacturer: Comp Ppjdpfx Aoh Eic Ajnwot Model: SB5 Motor: 2.2 kW Piston stroke: 500 mm Chamber dimensions: 500 x 350 x 400 mm

Kondisi: sangat baik (bekas), Hertz energy-saving boiler 50 kW Ppodpfxjq I Nfhj Anwot

Tahun pembuatan: 2025, Kondisi: baru, Complete dosing and packaging system for liquids, including tank, pump, and outfeed conveyor belt. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operation monitor, available in various languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servomotor for film feed, dual transport possible, air removal/extraction device (removes air from the pouch before sealing—no vacuum is generated), holder for heavy finished bags, Euro hole punching device, suitable for OPP and PE film (PE unit available at extra cost if required). - Specifications of the VFFS packaging machine: - Filling range: up to 3000ml - Film width: max. 520mm - Bag size min-max: L(80-400)xW(80-250)mm - Max. machine cycle speed (empty run): 50 cycles/minute - Stainless steel 304 - 220V, 4kW - 6bar, 0.3m³/min - Machine dimensions: LxWxH approx. 1150x1790x1650mm - Weight: 600kg - Specifications of the tank and pump: - Tank capacity: approx. 50l (customization possible) - Height: approx. 70mm Ppjdpfsv Nmlaox Anwet - Pump available in various versions, for example: 10~150ml, 150~500ml, 500ml~1L, 1L~2L, 2L~5L, etc. - The pump system will be adapted to customer-specific products based on sample provision. Specifications and product feed will vary accordingly (additional cost may apply). The outfeed conveyor has a stainless steel frame. - Specifications: - Conveyor speed: 30m/min - 220V, 0.55kW - Dimensions LxWxH: approx. 1850x550x1230mm - Weight: 80kg Dimensions of the complete system: approx. L1080xW3640xH1720mm, depending on final configuration. The system must generally be adapted to customer-/product-specific requirements, so specifications of modules and machines may vary accordingly. Main components: SIEMENS color touchscreen display, SIEMENS PLC control unit, SIEMENS servomotor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servomotor for film transport. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the typical used equipment prices. Feel free to contact us with your packaging requirements. We usually have 30-50 different new machines available immediately from stock. For customer-specific machines, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor belt. Suitable for both viscous and non-viscous liquids, such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form fill seal packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages such as English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, double transport possible, air separation/extraction device (removes air from the bag before sealing - no vacuum is generated), holder for heavy finished bags, Eurohole punching device, suitable for OPP and PE film (PE unit may be subject to surcharge). - Specifications of the VFFS packaging machine: Filling range: 150-1200ml; Maximum film width: 420mm; Bag size min-max: L(60-300)xW(60-200)mm; Max machine cycle rate without load: 50 cycles/minute; Stainless steel 304; 220V, 2.2kW; 6bar, 0.3m³/min; Overall machine dimensions: LxWxH: approx. 1080x1300x1400mm; Weight: 500kg. - Specifications for tank and pump: Tank capacity approx. 50l (customization possible); Height approx. 70mm; Pumps are available in various versions, e.g.: 10~150ml, 150~500ml, 500ml~1L, 1L~2L, 2L~5L, etc. The pump system will be tailored to customer-specific products based on sample submission. Specifications as well as product feeding will vary accordingly (surcharge may apply). The outfeed conveyor has a stainless steel frame. - Specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions LxWxH: approx. 1850x550x1230mm; Weight: 80kg. Dimensions of the complete system: approx. L1780xW1850xH1470mm, depending on final configuration. The system must fundamentally be adapted to customer/product-specific requirements, so the specifications given for modules and machines may vary accordingly. Main components: Color touchscreen display SIEMENS, PLC control SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in additional versions for different packaging sizes and speeds. Podpfxov Nmk Ne Anwopt Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and inform us about your packaging requirements. - Usually, 30-50 different new machines are immediately available from stock. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines come with full warranty.

Tahun pembuatan: 2001, Kondisi: baik (bekas), HSM-500.1_VL PRESS PAPER BALER FILM BALER BALE PRESS Ppodpfelc Du Njx Anwst Immediately ready for use, good CONDITION Used & in good shape / see photos Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Pressing force: 50 tons V 400; Hz 50 KW 7.5 Amp. 15.5 Pressing power: 6 tons Year of manufacture: 2001 More presses available in our other listings Item is used and in good condition / roughly cleaned (Just plug it in and start working) Dimensions: Available on request! Additional photos show possible applications. All items visible in the photos are also available from us. Price stated is net per unit for collection from warehouse, 47441 Moers Current stock: 1 unit Inspection is expressly offered. More equipment available in stock see photos or contact us by phone General information: We offer here items from various acquisitions, which we describe as accurately as possible and provide meaningful photos. We cannot provide further details on the item. We offer the possibility of viewing on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone arrangement. The item can be collected immediately if needed. We can only respond to inquiries about this item if you provide a telephone number in your request due to time constraints. Unless explicitly described otherwise, this offer concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically ok as far as we can determine. All offers ex-warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and transport costs. Feel free to call if interested. All dimensions are approximate. Errors in the description expressly reserved.

Kondisi: sangat baik (bekas), Dijual dudukan alat profesional SK40 dari merek ternama FAT (Fabryka Automatów Tokarskich). Model: 40.300.10 – Ø10×50. Dudukan alat dalam kondisi teknis sangat baik, siap digunakan. Paket termasuk alat terpasang (mata bor atau mata frais – terlihat pada foto). Tipe collet: SK40. Liner: Ø10 mm. Panjang shank: 50 mm. Produsen: FAT / FATool. Kondisi: bekas, berfungsi, siap pakai. Tersedia beberapa unit dengan ukuran yang sama, yakni Ø10×50. Ppjdjxcg Hyjpfx Anwet

Kondisi: sangat baik (bekas), Dijual dudukan alat milling profesional merek HOLEX (Hoffmann Group) dan ORION. • Tipe SK40 Ø6-50 (Weldon – baut samping) • Standar DIN 69871 AD – pendinginan sentral melalui spindle • Diameter penjepitan: Ø6 mm • Panjang: 50 mm • Penyeimbangan G 6.3 – hingga 12.000 rpm (HOLEX) • Kondisi sangat baik, bekas pakai – sepenuhnya berfungsi • Beberapa dudukan dijual lengkap dengan end mill / mata bor. Pjdpfxjxcgzdj Anwept

Kondisi: sangat baik (bekas), Holder merek ternama GARANT (Hoffmann Group) – jaminan kualitas dan keandalan tertinggi untuk pemrosesan CNC. Model SK40-12-50, nomor katalog 300100 12. • Kerucut SK40 – standar industri untuk pusat pemesinan • Diameter penjepit Ø12 mm • Panjang holder 50 mm • Kecepatan maksimum 25.000 rpm • Presisi tinggi dan keseimbangan dinamis • Cutter end mill terpasang pada holder Kondisi sangat baik, siap langsung digunakan. Alat profesional untuk mesin milling CNC, ideal untuk bengkel yang mengutamakan kualitas dan keandalan. -- HARGA UNTUK 1 PCS -- Ppedpfow Sy Ansx Anwjt

Kondisi: sangat baik (bekas), Dijual: Holder alat profesional GARANT SK40-6-50 untuk penjepitan presisi alat Ø6 mm. Produk merek ternama Hoffmann Group / Garant – Jerman, digunakan pada pusat pemesinan CNC. • Tipe holder: SK40 (DIN 69871) • Ukuran: Ø6 mm • Panjang: 50 mm • Nomor katalog: 300210.6 • Keseimbangan: G2.5 hingga 25.000 rpm • Ketelitian tinggi, penjepitan stabil • Ideal untuk endmill VHM, bor, dan alat presisi • Kondisi sangat baik – sudah dicek, siap pakai Holder GARANT adalah kelas atas dalam sistem penjepitan alat – jaminan kualitas dan daya tahan. -- HARGA UNTUK 1 PCS -- Pjdpfew Syzwsx Anwspt

Kondisi: sangat baik (bekas), Dijual holder alat profesional SK40-12×50-K, sesuai dengan standar DIN 69871 AD/B. Setiap holder dilengkapi dengan mata frais tangkai yang sudah terpasang (terlihat pada foto). - Jenis pemasangan: SK40 - Sleeve: Ø12 mm - Panjang penjepitan: 50 mm - Standar: DIN 69871 AD/B - Kondisi: bekas, sepenuhnya berfungsi, siap pakai Psdpfxjxcg H Hj Anwspt Perlu diketahui, tersedia beberapa unit lagi semuanya dalam ukuran yang sama Ø12×50.

Kondisi: sangat baik (bekas), Dijual dudukan frais profesional SK40 Ø8-50 sesuai standar DIN 69871 AD. • Taper SK40 • Penguncian Weldon Ø8 mm (baut samping) • Panjang 50 mm • Pendinginan sentral AD • Kondisi sangat baik – bekas, berfungsi penuh • Beberapa dudukan disertakan bersama dengan pisau frais dan mata bor. Podpfx Ajxcgzqsnwjpt

Kondisi: baik (bekas), Schmedt PraForm 21-50 joint-setting press Book press with joint forming attachment. Manufacturer: Schmedt, Germany. The machine is in very good condition, ready for immediate operation. Technical specifications: Ppjdpjy S Edrjfx Anwst - Maximum format: 450 x 520 x 100 mm - Weight: 264 kg - Power supply: 230V + compressed air.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, de2hu2it2lt-001 Psdpfx Anov N D Hbewspt

Tahun pembuatan: 2024, Kondisi: bekas, de-1 Ppedpfx Aneyaf Sqjwst