Beli Repkon Kolom Ganda Presse bekas (14.495)

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Iiodpfx Aaod Ih Nco Dsd Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Isdpsg S R Twefx Aa Deid Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Tahun pembuatan: 1984, Kondisi: bekas, Pressure: 100 t Upright gap: 1000 mm Stroke: 150 mm Isdpfx Aajfn Apzs Dsid Table area: 1000 x 700 mm Distance table/ram: 500 mm Drawing cushion stroke: 180 mm Ram area: 1000 x 700 mm Ram boreholes x depth: 50 mm Strokes per minute: 85 spm Pin hole (depth x diameter): 85 x 50 mm T-slot: 22 DIN 650 Shape: diagonal Number of T-slots: 2 Sheet width: 400 mm Sheet length: 1000 mm Space requirement (approx.): 3.0 x 3.0 x 3.0 m Machine weight (approx.): 8 t Total power requirement: 30.2 kW - Fine stroke adjustment - Stroke shock absorption - Oil extraction - 2 cylinders - Roller feed by Dreher, type WAV, control PMS3000 by Dreher - Soundproof cabin - Machine was overhauled in 2001 and equipped with new control SIEMENS SIMATIC OP17

Tahun pembuatan: 1981, Kondisi: bekas, Translation: Pressing force: 40 t Isdpjb U Hw Tjfx Aa Djid Upright spacing: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H 7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Hydraulic cushion pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid advance speed: 240 mm/s, steplessly adjustable

Tahun pembuatan: 1980, Kondisi: bekas, Press capacity 100 t Frame gap - mm Iodpfx Asdlxctea Dsid Stroke 350 mm Table dimensions 1150 x 700 mm Total power requirement 11 kW Machine weight approx. t Space requirements approx. m with ram shock absorber and drawing cushion Machine without control cabinet

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9101, jarak lintasan sumbu Y: 4.600 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan rotasi (maks.): 6.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Konfigurasi mesin: • PowerPortal4000 • Kepala frais diagonal 45° (C 0,01°/ A 0,01°) • Sistem kamera pada kepala frais diagonal SHW • Antarmuka kepala frais 4-titik Hirth • Heidenhain TNC 7 • Handwheel HR 550 FS • Optimasi Heidenhain untuk pemesinan 5-sumbu • X=pilihan bebas, Y=4.600 mm, Z=1.600 mm • ToolCenter dengan 90 alat • Sistem pendingin 2.500 l • Pompa pendingin 70 bar / 30 l/menit • Pergantian pendingin air-udara • Pistol pencuci di area kerja • Penggerak utama 75 kW hingga 6.000 rpm • Dudukan alat SK 50 BIG-PLUS • Penutup dan kisi-kisi lantai • Konveyor serpihan ganda • SHW-UniScan • Udara pengunci • Mode operasi 3 • Probe pengukur nirkabel Hexagon Iisdsygtnajpfx Aa Dsd • Lampu LED area kerja • Kamera kedua di area kerja

Kondisi: bekas, Tahun pembuatan: 1987, Tekanan 800 t Diameter spindel 100 mm Iiedpfxezl E Sao Aa Dsd Kecepatan spindel 45 /menit Lebar rangka 600 mm Luas meja 560 x 650 mm Gaya ejektor 5 t Langkah ejektor 15 mm Luas pelat 590 x 450 mm Daya penggerak 22,0 kW Berat 17,0 t Ruang yang dibutuhkan (L x P x T) 1,7 x 2,55 x 3,1 m Langkah gaya nominal 1,46 mm Dilengkapi dengan penggerak tuas lutut, rem roda gila, kopling hidrolik dengan rem ke-2, penyeimbangan rangka mesin, sistem ejektor tunggal di meja, dan sistem kontrol yang melakukan pemantauan sendiri.

Kondisi: bekas, Tahun pembuatan: 1997, Press force 630 t Stroke 300 mm Strokes per minute 10-75 spm Table size 3600 x 2200 mm Clear width 4000 mm Ram area 3600 x 2200 mm Lateral frame opening 2000 mm Ram adjustment 150 mm Die height (stroke down, adj. up) 1000 mm Operating voltage 400 V Overall height above floor 7600 mm Press pit depth below floor 2500 mm Total power requirement 160 kW Machine weight approx. 225 t Floor space approx. 750 m² Complete blanking line with decoiler/feeder and destacking system. Line suitable for strip width 300-1600 mm and strip thickness 0.5-3 mm. Machine is equipped with two sliding tables, frontally interchangeable. The destacking unit is positioned laterally with two pallets. Destacking to the rear is also possible with two pallets. Triple coil feeding, each for 25 t, decoiler Schnutz, entry guide, straightener, and roller feeder. Ijdpfxowx R Rds Aa Djid

Kondisi: bekas, Tahun pembuatan: 1987, Pressure 125 t Iisdpfx Aet Hwuiea Dod Upright distance 1050 mm Stroke 250 mm Total power requirement 40 kW Machine weight approx. 8.5 t Space requirement approx. m DUNKES CNC control system type CNC 1000, controlled drawing cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Cutting impact damping

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Total power requirement: 15 kW Machine weight approx.: 4 t Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Iedpfx Ajt Hw Amsa Djid Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. Ijdpfjt Hwwdex Aa Dsid • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: bekas, Tahun pembuatan: 1978, Zulässige Hubzahl in Relation zum Mat.-vorschub bei 300 mm = 40-60 Hübe 150 mm= 120 Hübe Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Type AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, ohne Grube). Blechband führt über die Abrollhaspel hinweg zum einseitigen Zangenvorschubapparat und dann in die Maschine. • HEILBRONN Coilabwickelgerät Type HAEMH 4000/500 S #204753 mit Coilablage- Platz, in welchem das Coil aufgegriffen und gespannt wird und dann wieder in Zurück in Position fährt, max. Coilgewicht 4000 kg, Coil-Ø max. 1500 mm, max. Bandbreite 500 mm, • angebauter Richtapparat für maximale Blechbreite 400 mm, die Blechführung ist In der Breite verstellbar, Blechstärke verstellbar 1-3 mm • automatische Öl-Umlaufschmierung mit Überwachung, • hydr. Überlastsicherung, motorische Stößelverstellung 125 mm Iodpfot Hwz Nsx Aa Doid • Förderband für die fertigen Pressteile, separater Schaltschrank -1990 modernisiert- Admissible number of strokes in relation to material feed: 300 mm = 40–60 strokes, 150 mm = 120 strokes. Accessories/Special Equipment: • FREI / WEINGARTEN straightening unit, type AMR 04 So, with subsequent overhead loop control (space-saving, no pit required). The strip runs over the decoiler to a single-sided gripper feed unit and then into the machine. • HEILBRONN coil unwinder, type HAEMH 4000/500 S #204753, with coil storage station, where the coil is picked up, clamped, and then moved back into position. Max. coil weight 4,000 kg; max. coil diameter 1,500 mm; max. strip width 500 mm. • Integrated straightening device for max. sheet width 400 mm, adjustable sheet guide width, thickness adjustable 1–3 mm • Automatic oil circulation lubrication with monitoring • Hydraulic overload protection, motorized ram adjustment 125 mm • Conveyor belt for finished pressed parts, separate control cabinet – modernized 1990.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06651, jarak pergerakan sumbu X: 6.800 mm, jarak lintasan sumbu Y: 3.700 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 10 m/menit, panjang total: 15.000 mm, lebar total: 7.500 mm, kecepatan spindel (maks.): 4.000 rpm, tinggi total: 7.000 mm, tinggi meja: 1.100 mm, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 10 m/menit, jarak antara penyangga: 3.300 mm, jenis arus masuk: tiga fasa, beban meja: 50.000 kg, kecepatan rotasi (maks.): 4.000 rpm, jarak dari tengah meja ke hidung spindel: 2.110 mm, berat keseluruhan: 110.000 kg, daya motor spindle: 50.000 W, panjang kabinet kontrol: 7.000 mm, tinggi kabinet kontrol: 2.000 mm, lebar kabinet kontrol: 600 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Mesin frais portal untuk pemesinan 5 sumbu dalam kondisi sangat baik, saat ini sedang dalam proses perbaikan. MODEL: Tipe Portal TAHUN: 1992, diperbarui 2002, diperbarui 2018 NOMOR SERI: 06651 KATEGORI: Mesin frais, Tipe planer, CNC KAPASITAS: Pergerakan Sumbu X: 6800 mm Pergerakan Kepala Sumbu Y: 3700 mm Ijdpjyahv Ssfx Aa Djid Langkah Sumbu Z: 1500 mm, rel silang tetap Penampang Silang Ram: 500 mm x 500 mm Jarak Antar Kolom: 3300 mm Jarak Meja ke Permukaan Ram: 2110 mm, jalur vertikal 2000 mm Ukuran Meja: 6000 x 2500 mm Diameter Spindel (Boring): 250 mm Taper Spindel: ISO #50 Kecepatan Spindel: 0-4000 RPM Motor Spindel: 50 KW DILENGKAPI DENGAN: Sistem FIDIA C20 CNC, baru pada tahun 2002 Kepala frais CNC biaxial kontinu Kepala frais universal dengan pengindeksan otomatis Kepala siku dengan pengindeksan otomatis Kepala frais lurus Gerbong untuk penggantian kepala dan penggantian alat Bantalan hidrostatik Sistem pendingin Konveyor serpihan sepanjang penuh di kedua sisi Pelindung jalur Pergerakan cepat: Z-10.000 mm/menit, X dan Y-15.000 mm/menit Kapasitas beban meja: maks. 50.000 kg Berat mesin: 110.000 kg Dimensi luar: 15.000 x 7.500 x 7050 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3.8203, jarak pergerakan sumbu X: 7.570 mm, jarak lintasan sumbu Y: 4.900 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 10 m/menit, panjang total: 18.700 mm, panjang meja: 6.850 mm, lebar meja: 2.250 mm, lebar total: 8.500 mm, kecepatan spindel (min.): 5 rpm, kecepatan spindel (maks.): 2.000 rpm, tinggi total: 7.050 mm, tinggi meja: 300 mm, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 10 m/menit, jarak antara penyangga: 2.750 mm, jenis arus masuk: AC (pendingin udara), beban meja: 60.000 kg, berat benda kerja (maks.): 60.000 kg, jarak meja ke pusat spindel: 2.500 mm, berat keseluruhan: 145.000 kg, daya motor spindle: 63.000 W, panjang langkah makan poros W: 2.000 mm, Mesin dalam keadaan terdisassembly dan tersedia di gudang. Iodpjyl S Ngofx Aa Deid KAPASITAS: Pergerakan Sumbu X: 7570 mm Pergerakan Kepala Sumbu Y: 4900 mm Langkah Ram Sumbu Z: 1000 mm Pergerakan melintang Sumbu W: 2000 mm Luas Penampang Ram: 500 mm x 500 mm Jarak Antar Kolom: 2600-2750 mm Jarak Meja ke Permukaan Ram: 2500 mm Ukuran Meja: 2x3000+850 mm x 2250 mm, dua meja untuk operasi terpisah atau terpadu Diameter Spindel (Mandrel): 225 mm Tirus Spindel: ISO #50 Kecepatan Spindel: 0-2000 RPM Motor Spindel: 63 KW DILENGKAPI DENGAN: Sistem SIEMENS 840D CNC, baru pada tahun 2008 Kepala pemotong kontinu biaxial CNC Kepala pemotong sudut kanan 700 mm Kepala pemotong sudut kanan ramping 900 mm Kepala pemotong lurus 700 mm Gerobak untuk penggantian kepala dan penggantian alat Bantalan Hidrostatik Sistem Pendingin Konveyor Serpihan Sepanjang Pelindung Rel Motor Spindel 63 KW Pergerakan cepat: W-2000 mm/menit, Z-10.000 mm/menit, X dan Y-15.000 mm/menit Beban meja: 30.000 kg+30.000 kg, maksimum 60.000 kg Berat mesin: 143.000 kg Dimensi luar: 18.700 x 8.500 x 7050 mm

Kondisi: bekas, Tahun pembuatan: 1980, Detail teknis: Tekanan: sekitar 100 t Jarak antar tiang: 500 mm Lengan keluar ke tengah ram: 350 mm Tinggi pemasangan: 450+100 mm Langkah ram - min.: 26 mm Langkah ram - maks.: 152 mm Iiedpfxju Nfhds Aa Dsd Penyetelan ram: memungkinkan/possible mm Permukaan ram: 550 x 400 mm Meja pemasangan: 1020 x 710 mm Kebutuhan daya total: 10 kW Berat mesin kira-kira: sekitar 7 t Kebutuhan ruang kira-kira: P:2,0 x L:1,7 x T:3,2 m - tanpa bantalan penarik Press dapat didemonstrasikan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, daya: 38 kW (51,67 hp), panjang langkah: 400 mm, lebar meja: 1.320 mm, panjang meja: 1.000 mm, tinggi total: 6.300 mm, jarak antara penyangga: 1.000 mm, penyesuaian silinder hidrolik: 200 mm, Преса за изрязване с усилие 400 тона ERFURT, Германия, модел PKZ 400 Iisdpfx Aaelnlpxs Dsd

Kondisi: bekas, Technical details: Faceplate diameter: 4000 mm Swing diameter: 4300 mm Turning height: 330 mm Faceplate speed range: 1 - 92 rpm Workpiece weight: 18 t Feed rates: 1 - 4000 mm/min Main drive motor: 55 kW Total power requirement: 85 kVA Machine weight approx.: 64 t Space requirement approx.: 9.0 x 7.2 x 5.5 m Equipped with CNC SIEMENS 840 D Iodpfx Aevb Dq Rsa Djid With 2 vertical supports Tool base holder Chip conveyor

Kondisi: bekas, technische_details_si_5000_6100_2400_1490_340_100000_100_155_0,4 -50_2achsen_cnc_si840d Iisdpfx Aasw Rz U Ao Dsd

Kondisi: baik (bekas), Tahun pembuatan: 1997, Produsen: Line Tipe: Seramill 240 Kontrol: NUM 750 Perjalanan sumbu X: 6000 mm Perjalanan sumbu Y: 2500 mm Iedpeyf A H Nefx Aa Dsid Perjalanan sumbu Z: 950 mm Jarak kolom: 2400 mm Meja: 6000 x 2100 mm Kepala frais otomatis: 2,5° Kecepatan spindle: 3200 rpm Kecepatan pengumpanan: 10 m/menit Berat mesin: sekitar 35 ton

Kondisi: bekas, Technical Details: Table diameter: 4,500 mm Faceplate diameter: 4,500 mm Operating hours: 0 h Swing diameter: 5,000 mm Turning diameter: 5,000 mm Max. workpiece height: 2,500 mm Control: Sinumerik 840D SL X-axis: 300 mm ram stroke X-axis: 2,850 mm ram travel X-axis: 2,850 mm working area without tool X-axis: 5,000 mm with tool changer W-axis: 1,800 mm cross rail travel Tool stations / positions: 12 Tool holder: HSK 100 (spindle) Workpiece weight: 100 t Table speed: 1 - 50 rpm T-slots: 8 pcs (36 H12) Milling ram speed: 4,000 rpm Rapid traverse speed in X and Z: 8,000 mm/min Torque - milling: 100,000 Nm Torque - turning: 200,000 Nm Total power requirement: 80 (2x40) kW Machine weight: approx. 140 t Machine dimensions (LxWxH): approx. 11.5 x 6.6 x 8.4 m NEW CNC vertical turning lathe – currently being manufactured to official order and deposit. The photos shown are of an identical newly built machine that we have delivered to a customer. (The images are for illustrative purposes only.) Manufacturing applications: Turning, such as external longitudinal turning, internal and external facing, and profiling. Grooving operations (internal & external) Drilling, including short and deep hole drilling Milling, such as face, corner, profile and T-slot milling Thread cutting Also suitable for roughing and end machining. Iedpfeu Ix H Dex Aa Djid The machine bed, designed as a welded construction, absorbs extreme cutting forces. The table is made from high-tensile Meehanite cast iron. To withstand heavy loads, the workpiece weight is supported by two high-precision tapered roller bearings. Additionally, the table is equipped with hydrodynamic support for the workpiece. Other features: automatic tool changer power chuck (8 jaws with hydraulic clamping spindle and hardened jaws) including 40 bar coolant system with filtration unit hydraulic and lubrication systems by ATOS and Dropsa with Heidenhain axis measuring system Renishaw NEW – with warranty & service from WMW AG

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, gantry-2010 Iiedoy Dvwyjpfx Aa Dsd

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: fungsi terbatas, CNC gantry milling center (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 Iodpoyuptzsfx Aa Dsid A high-performance gantry milling machine designed for the machining of large workpieces. The primary areas of application are milling and turning of large, complex components. The machine can be inspected under power by appointment. Condition: According to its year of manufacture; partial overhaul is required in some areas. A very high-quality machine, therefore absolutely worthy / strongly recommended for modernization or complete overhaul. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm - Machine length: 31,100 mm - Machining length: 11,000 mm - Clearance width: 4,400 mm - Clearance height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area per single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight on total table: 112 t - Maximum permissible workpiece weight on single table: 80 t Crossbeam: - Travel: 2,000 mm Milling and drilling slide: - Drive power for milling and drilling (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - CNC control: SINUMERIK 880 - 2 chip conveyors - Documentation - CE mark No guarantee regarding the completeness or accuracy of technical data and equipment details. – Subject to prior sale – A detailed technical data sheet and further equipment information are available on request.

Kondisi: bekas, Tahun pembuatan: 1991, 1 Iiedpfx Ajyq Swhsa Ded

Kondisi: baik (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: F3554, Penawaran 25228 Mesin gergaji pita horisontal hidrolik dengan dua kolom pemandu Data teknis: - Proses kerja otomatis, pemotongan, pengangkatan/penurunan hidrolik - Bingkai gergaji naik/turun secara hidrolik, otomatis pengumpan material hidrolik - Ukuran pita gergaji: 4400 x 34 x 0,9 mm - Kecepatan pemotongan, dapat diatur tanpa tingkat: 15 – 88 m/menit - Pengaturan tekanan pemotongan tanpa tingkat: 10 – 15 bar - Kecepatan penurunan: 0 – 300 mm/menit - Kapasitas potong pada 90°: - Bulat: 360 mm - Persegi/datar: 360 x 430 mm - Penjepitan material hidrolik Iisdpfx Aaowvrvie Dsd - Otomatis pengumpan material hidrolik - Sistem pendingin - Daya penggerak: 400 V / 3 kW - Kebutuhan ruang: kurang lebih L 2200 x T 1850 x D 1300 mm - Berat: kurang lebih 1100 kg - Roller table: 2000 mm

Kondisi: bekas, Tahun pembuatan: 1985, Technical details: Pressure: 100 t Strokes: 35-100 strokes/min Throat depth: 360 mm Ram adjustment: 20-130 mm Iisdpju Nfh Defx Aa Djd Ram surface: 750x550 mm Clamping plate on table: 1000x640 mm Stroke adjustment: 90 mm Passage between uprights lengthwise/crosswise: 610x500 / 440x550 mm Installation height, table/ram bottom: 300 mm Total power requirement: 17.5 kW Machine weight approx.: approx. 7.0 t Machine dimensions (LxWxH): approx. 1.9x1.4x2.7 m - The ram plate features 5 longitudinal T-slots - Center hole = 50 mm This press is currently for sale without a control system. Optional completion can be provided upon customer request. Subject to prior sale.