Beli Romer /Automatyczna Linia Automat bekas (23.701)

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. Hsdpfxsfz I D Do Aaiot In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. Hjdpfsflmdwex Aaijt - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. Hsdpfx Ajfzq Stjaijt • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Kondisi: baik (bekas), Tahun pembuatan: 2011, automatic depalletizing line for unloading from box pallets. The line is manufactured by MEGA and consists of roller conveyors, a turntable, and a tipper. Suitable for unloading all types of vegetables from box pallets/bulk bins. Hodswylikepfx Aaist

Tahun pembuatan: 2020, Kondisi: baru, The use of a photocell in the part's working area enables measurement of its length, thus allowing the spray guns to be activated when the part enters their range and deactivated immediately after painting is completed. The photocell is included as standard equipment. Part identification with special tags. There are identification plates with holes mounted on the workpiece sling. Based on this, the PLC controller together with the photocell detects the painted part, turning the guns on and off at the right moment, thereby saving energy and powder coating. Vertical shape detection of the part. The use of light curtains with horizontal sensors allows the PLC controller to analyze the part’s vertical shape. The PLC calculates the expected time for the part to arrive within the gun area; this enables selective activation or deactivation of the guns. Utilization of light curtains with multiple sensors, both horizontal and vertical. Hsdpfx Ajfy T Aroaijt This solution enables precise measurement of the part’s dimensions, allowing for manipulator control as well. Benefits of using photocells or light curtains include primarily the savings of powder and energy by avoiding paint application in areas with no part present. With light curtains, precise gun control is possible.

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Hedpsflmdbjfx Aaist Pricing information is available in the catalog.

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Hjdpjfy T Szjfx Aaiot Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11/2022, panjang total: 2.750 mm, lebar total: 1.650 mm, tinggi total: 1.800 mm, berat keseluruhan: 750 kg, Perlengkapan: dokumentasi / manual, Mesin CNC otomatis untuk sablon UV — SD2-C4-UV (2022) MESIN YANG DITAWARKAN: SD2-C4-UV adalah mesin CNC otomatis empat warna yang dirancang untuk pencetakan sablon. Perangkat ini melakukan pencetakan multi-warna pada produk datar dan tiga dimensi (silinder), menggunakan tinta yang dikeringkan dengan sinar UV dan inframerah (IR) dalam satu siklus produksi. Mesin ini memungkinkan pencetakan pada objek tiga dimensi dalam maksimal enam warna, menggabungkan teknologi UV dan IR. Dirancang untuk mencetak komponen yang terbuat dari bahan tidak mudah terbakar dan plastik, dengan ketentuan pengendalian suhu permukaan komponen yang dikeringkan. Kami menawarkan untuk dijual mesin CNC otomatis untuk sablon UV model SD2-C4-UV yang berfungsi penuh, diproduksi pada tahun 2022 (nomor seri 11/2022). Perangkat ini beroperasi tanpa masalah, dan penjualan dilakukan karena perubahan profil produksi. SPESIFIKASI DASAR • Model: SD2-C4-UV • Nomor seri: 11/2022 • Tahun produksi: 2022 • Kondisi: bekas, berfungsi secara teknis • Penghitung siklus: 381.124 • Dokumentasi: DTR lengkap (120 halaman) PARAMETER TEKNIS • Catu daya: 3 × 400 VAC / 50 Hz / daya maks. 10 kW • Dimensi: 2750 × 1650 × 1800 mm; berat ~750 kg • Tekanan kerja: 6,0 bar (maks. 7,0 bar) • Pencetakan objek silinder: diameter 10–150 mm, tinggi hingga 250 mm • Pencetakan objek datar: hingga 250 × 100 × 100 mm • Area cetak maks.: 310 × 180 mm (1 warna) • Pengoperasian: 1 operator KEUNGGULAN UTAMA Hedpezwdv Uofx Aaiet • Sablon UV dan IR empat warna dalam satu siklus (hingga 6 warna) • 9 penggerak servo CNC — otomasi penuh gerakan • Pencetakan pada objek silinder (diameter 10–150 mm) dan datar • Sistem visual (kamera + monitor) untuk penyelarasan layar yang presisi • Servis jarak jauh melalui Internet; pembaruan perangkat lunak • Pengontrol PLC dengan HMI layar sentuh, menu dalam bahasa Polandia • Sistem keselamatan lengkap sesuai dengan standar CE (penghalang optoelektronik, pedal kaki) • Reaktor UV dengan lampu 200 mm / ~250 W/cm

Kondisi: sangat baik (bekas), MOSCA RO-M-P2 – mesin otomatis untuk mengikat dengan pita PP Dijual mesin otomatis berkualitas tinggi untuk mengikat dengan pita polipropilen (PP) dari produsen Jerman terkemuka, MOSCA. Perangkat ini dirancang untuk mengikat karton, paket, dan produk lainnya dengan cepat dan efisien yang dipersiapkan untuk transportasi dan penyimpanan. Mesin ini sangat cocok untuk digunakan di gudang, pusat logistik, perusahaan manufaktur, toko online, dan pabrik pengemasan. Spesifikasi teknis: Produsen: MOSCA Maschinenfabrik Gerd Mosca GmbH Model: RO-M-P2 Tahun pembuatan: 2000 Nomor seri: 58664 Negara pembuatan: Jerman Catu daya: 230 V Frekuensi: 50 Hz Daya: 0,5 kW Arus nominal: 2,4 A Tegangan kontrol: 24 V DC Peralatan: Pengikatan otomatis dengan pita PP Pengaturan kekuatan tegangan pita Penyegelan otomatis pita Panel kontrol dengan lampu indikator Sakelar utama Meja kerja besar dari baja tahan karat Konstruksi portabel dengan roda Konstruksi industri yang kokoh Kondisi: Mesin bekas. Berfungsi secara teknis. Hsdpfjzkmp Dex Aaiot Kondisi visual baik, dengan tanda-tanda penggunaan normal akibat pemakaian. Dijual persis dalam kondisi seperti yang terlihat di foto.

Kondisi: sangat baik (bekas), Saya menawarkan mesin pengemas palet SANPACK FIX yang dirancang untuk mengamankan muatan dengan stretch film saat penyimpanan dan transportasi. Spesifikasi teknis: Hsdpfxezf Rkuo Aaiet Pabrikan: Sanpack Model: SANPACK FIX Daya listrik: 3×380V + N + PE Frekuensi: 50 Hz Daya: 0,55 kW Arus nominal: 2,0 A Tingkat perlindungan: IP54 Keunggulan: Meja putar untuk palet Penahan stretch film Konstruksi industri yang kokoh Pengoperasian melalui panel kontrol Ideal untuk gudang, fasilitas produksi, dan pusat logistik Kondisi visual sesuai foto. Mesin bekas.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Hjdpfx Aeflrc Sjaijt Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option. Hjdpfjfz Ndyox Aaiot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MClL-800?OSK+KK, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, jenis pendinginan: udara, lebar total: 2.330 mm, panjang total: 2.150 mm, tinggi total: 2.800 mm, tebal plat aluminium (maks.): 2 mm, tekanan operasi terus-menerus: 0,5 batang, panjang meja: 1.150 mm, Perlengkapan: Pelat tipe tersedia, air panas, Industrial rotary spray washer with vapor freezing device and ionization station. Designed for cleaning steel, aluminum, and non-ferrous metal components with a maximum load capacity of 250 kg and dimensions up to 1000x800 mm. The workstation comes with technical documentation and service records. For more information, please call. Hodpfx Aaewnbh Eoijt

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KAP1, kebutuhan udara: 16.000 m³/jam, daya: 36 kW (48,95 hp), kapasitas hisap: 16.000 m³/jam, Perlengkapan: kabin, Dielektrische automatische Pulverbeschichtungsanlage KAP1 Preis: 492.693,30 PLN + MwSt. Elektrische und Energiedaten • Spannung: 400 V (3P + N + PE) • Anschlussleistung: 36,34 kW • Pneumatikanschluss: 1" • Luftdruck: mind. 6 bar • Luftqualität: Öl < 0,1 mg/m³, Wasserdampf < 1,3 g/m³ • Luftverbrauch: 1.710 Nl/min (Betrieb) • Kompressor: SC-30 • Lufttank: 1.800 L Lackierparameter • Beschichtungsgeschwindigkeit: 1.933 mm/min • Bauteilmaße: 800 x 1.800 mm • Aufhängehöhe: 500 mm • Schichtstärke: 100 µm • Pistolenanordnung: vertikal Technische Daten und Ausstattung • Ausführung: dielektrischer Kunststoff • Durchgangsmaße: 1.000 x 2.400 mm • Luftdurchsatz: 12.348–16.000 m³/h • Pulverzentrum: ProfiCenter CP02 • Manipulatoren: 2 Stk. • Pistolen: 8 automatisch, 2 manuell (ProfiSpray) • Werkstückerkennung: ja (Höhe, Breite) • Systeme: Zyklonabscheider, ProfiControl, Traversenzug • ATEX: Zone 22, II 3D Plattformen und Kabinenkörper • Plattformen: Ein- und Auslauf, Edelstahlboden, rutschhemmende Treppen • Verkleidung: dielektrischer Kunststoff, LED-Beleuchtung, Aussparungen für Manipulatoren Luftmesser und Absaugkanal • Automatische Bodenreinigung • Absaugkanal mit pneumatischer Klappe Pistolenabblasung und Steuerung • Automatisches Pistolenabblasen • 10" Touchpanel, 50 Programme, Manipulatorsteuerung, Absauganlage, Fahrgeschwindigkeit Hedpjv Rpx Sofx Aaiot X-Achse und Werkstück-Zug • Automatische Pistolenpositionierung • Werkstück-Zug: Geschwindigkeit 570–2.830 mm/min, 2 Zugvorrichtungen Die Maschine beinhaltet außerdem: • ProfiSpray A Applikator • PSS-1 Steuergerät • PM-1 Pistolen • ProfiCenter CP-02 Pulverzentrum • CK-D1400L Zyklon-Absauganlage • MA1-180 Manipulator und MX1-10 X-Achse • OZ-12H Absauganlage • ProfiControl 10" Steuerung • BP-H2000 W900 Werkstück-Messsystem

Tahun pembuatan: 2020, Kondisi: baru, ROMER is also involved in the production of overhead conveyor systems. Cross traverses (cross transport) are specially designed and manufactured for certain installations. Below are some examples of equipment: conveyor systems. Depending on customer requirements, the conveyor systems can either be floor-mounted or suspended from rails. Hodpfjfz Dibox Aaiet - For convenient solutions in manual installations, we recommend suspended cross beams (cross transport). - For automated systems, chain conveyors are most commonly used; these run continuously without stopping and are an excellent solution for companies focused on process quality and repeatability. - For businesses that manufacture different products simultaneously or have several booths for various colors, flexible solutions using a gravity conveyor are implemented—this is the most expensive solution.

Tahun pembuatan: 2020, Kondisi: baru, ROMER is also engaged in the production of overhead conveyor systems. Cross transfers (lateral transport systems) are designed and manufactured for specific installations. Examples of equipment are listed below: Transport systems Depending on customer requirements, the transport systems can either move on the floor or be suspended from rails. - For efficient solutions in manual installations, we recommend overhead cross beams (lateral transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an excellent solution for companies focused on quality and process repeatability. Hsdpfsfz Difox Aaist - For businesses that produce different items simultaneously and, for example, operate multiple booths with various colors, flexible solutions utilizing power-free conveyors are used. This is the most expensive option.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7525SE-0949-FA, rentang pengukuran sumbu X: 2.600 mm, jumlah sumbu: 7, RINCIAN TEKNIS Hedpfx Aozv Rhusaist Sumbu: 7 Rentang pengukuran: 2,6 m Akurasi Suhu saat pengujian: 20 °C Kelembapan udara saat pengujian: 50 % Deviasi titik tunggal yang diizinkan: 0,028 mm Deviasi titik tunggal yang terdeteksi: 0,010 mm Deviasi panjang volumetrik maksimum yang diizinkan: ± 0,039 mm Deviasi panjang volumetrik yang terdeteksi: -0,018 mm Pemindai Produsen: Hexagon Model: CMS108 Integrasi: Terkalibrasi di lengan pengukuran Catatan: Dapat digunakan pada lengan pengukuran dengan perangkat lunak pemindaian yang sesuai Catatan: Perangkat lunak pemindaian tidak termasuk dalam cakupan pengiriman RINCIAN MESIN Desain: Sistem pengukuran portabel Berat sistem pengukuran termasuk kotak transportasi: sekitar 40 kg Dimensi luar kotak transportasi lengan pengukuran: sekitar 1.350 x 550 x 350 mm Dimensi tripod: sekitar 750 x 750 x 750 mm Berat tripod: sekitar 75 kg Dimensi kotak pemindai: sekitar 600 x 450 x 220 mm Berat pemindai termasuk kotak pembawa: sekitar 6 kg Ukuran laptop: 17 inci Catatan: Lengan pengukuran diberi label ulang sebelum kalibrasi terakhir PERLENGKAPAN - Lengan pengukuran Hexagon ROMER Absolute Arm RA-7525SE, 7 sumbu - Mobility Pack FP2-1503-FA dengan koneksi nirkabel ke komputer - Kotak transportasi untuk lengan pengukuran - Kaki magnet - Bilah pengujian, panjang 700 mm - Bola pengujian, diameter 25 mm - Kotak probe dengan 3 probe - Probe dengan bola rubi, diameter 6 mm - Probe dengan bola rubi, diameter 3 mm - Bola kalibrasi, diameter 15 mm - Penutup pelindung debu - Set kabel lengkap - Sertifikat kalibrasi lengan pengukuran, laptop Dell M6600 - Perangkat lunak PowerInspect 11 termasuk kunci perangkat keras (hardware dongle) - Perangkat lunak Hexagon-RDS - Tripod bergulir Brunson 231, tinggi dapat disesuaikan - Rentang penyesuaian tinggi tripod: sekitar 700 hingga 1.100 mm - Pemindai Hexagon CMS108 - Kotak pembawa untuk pemindai - Sertifikat kalibrasi pemindai Catatan: PowerInspect 11 hanya untuk pengukuran taktil, tidak dapat dipasangkan dengan pemindai Catatan untuk permintaan pengemasan: €250, palet khusus dengan konstruksi karton dan tripod di atas palet Eropa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, pl-hu-01 Hodpfxeyw Iags Aaiet

Kondisi: baik (bekas), For sale: - Injection molding machine, aggregate, and automatic system for the production of EPS styrofoam mouldings – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the system, facilitating disassembly and clear marking of all connections for the buyer. - Complete machine, ready to be connected to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of styrofoam thermo boxes and fish boxes; 3 sizes, with or without holes, with lid – total 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. Hjdoua Dqiopfx Aaiet - The set includes rights to the box and fishbox designs – full documentation included. NOTE! The machine also enables the production of EPS building mouldings for walls and ceilings – examples shown in one of the photos. We also offer other elements of the production line – check our listings. Other components/devices for sale: - Injection molding machine, aggregate, and automatic system for the production of EPS foundation boards, including mold - EPS pre-expander - Steam system: boiler house and machines - 3m3 steam tank - Installation for expanded EPS transport - EPS silos - Styrofoam crusher - A wide range of spare parts Additional photos and information available upon request via email. It is possible to purchase individual items separately.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, The line was manufactured in 2010, with a complete modernization carried out in 2020. ZEMAN CZS LINE – SPECIFICATIONS The fully automatic 'PURLIN' line, ZEMAN’s flagship product, is designed for the production of open, cold-formed profiles such as C, Z, and Sigma profiles in various widths and shapes. This is made possible by the fully automatic adjustment of the profile rollers. The machine can process coils with widths of up to 750 mm and sheet thicknesses from 1.25 mm to 3 mm, in steel grade S-390 and below. It is engineered for producing components up to 15 meters in length. The width of the specially hardened profile rollers can be continuously adjusted via special software. An integrated punching unit produces all types of fastening holes. The entire process is continuous, meaning the material does not stop for individual operations such as punching or cross-cutting. For high production efficiency, the line speed is dynamically optimized, with automatic braking and acceleration requiring no operator intervention. Hjdpoymampjfx Aaist A decoiler with a maximum load capacity of 15 tons is mounted on a trolley and enables precise centering of the material strip before feeding it into the straightening machine. The straightening machine, together with a bow straightening system, ensures the required flatness of the sheet and reduces bow deformation on the conveyor belt. 2. Punching Area This section features five double, 'flying' punching portals equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for creating fastening holes. Tool combinations are also possible. 3. Pre-cutting Shear A 'flying' shear is used to pre-cut holes for the main cutting shear. This process ensures material continuity and results in more precise profile shapes, especially at the beginning and end. It is an adaptive guillotine that adjusts the cutting width for the holes to match the strip width. 4. Guide Carriage/SIGMA Modules The guide carriage centers the strip before it enters the roll forming machine. It can be interchanged with a module for Sigma profile production. For manufacturing S+ profiles, the guide carriage is removed and two Sigma modules are installed. These modules position themselves fully automatically and independently on the left and right sides. 6. Rotary Cut-Off Saw The rotary cut-off saw with hook blades separates the finished profile from the strip. The holes created by the pre-cutting shear are used for this. It is a 'flying' cut-off saw, allowing the sheet to remain in motion during cutting. Depending on the desired profile, the corresponding cutting cassette is used. 7. Receiving Table The receiving table is used for the automatic discharge of the finished profiles from the roller conveyor. The elements are then manually bundled together into a package. The design allows for easy bundling. The table is dimensioned for profiles up to 15 meters long and provides access for a forklift or overhead crane to remove the profile bundle.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 12 h, daya: 30 kW (40,79 hp), tegangan masuk: 380 V, suhu: 200 °C, panjang dalam: 1.200 mm, lebar dalam: 1.700 mm, tinggi dalam: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.200 mm, tinggi total: 2.800 mm, berat keseluruhan: 400 kg, Jumlah ruang: 1, jenis kontrol: Dikendalikan oleh PLC, Perlengkapan: Penandaan CE, Professioneller Verbundwerkstoff-Härtungsofen – Romer SL Innenmaße: 1200 × 1700 × 2300 mm Leistungsstarker Industrieofen zur Härtung von Verbundwerkstoffen des renommierten polnischen Herstellers Romer. Entwickelt für fortschrittliche Herstellungsprozesse wie das Härten von Carbonfaser-Prepregs, Trocknung, Nachhärtung und thermische Verarbeitungsanwendungen. Dieser elektrische Kammerofen eignet sich ideal für die Produktion in der Luft- und Raumfahrt, Automobilindustrie, im Schiffbau, Motorsport und in industriellen Composite-Fertigungen, bei denen genaue und stabile Temperaturregelung unerlässlich ist. Die Konstruktion umfasst einen stabilen Stahlrahmen, Edelstahlauskleidung im Innenraum sowie eine robuste, pulverbeschichtete Außenverkleidung für dauerhaften Industrieeinsatz und hohe Betriebssicherheit über viele Jahre. Das intelligente Steuersystem gewährleistet präzises Temperaturmanagement, energieeffizienten Betrieb sowie zuverlässig gesteuerte Beheizungs- und Abkühlungsphasen. Das integrierte Umluft- und Belüftungssystem sorgt für eine gleichmäßige Wärmeverteilung im gesamten Kammervolumen – für konstante Aushärtequalität. Wesentliche Merkmale: Hodpfxey Tvvzs Aaist • Maximale Betriebstemperatur: 200°C • Innenmaße: 1300 × 1800 × 2000 mm • Speziell für Prepreg-Verbundanwendungen entwickelt • Robuste Industrieausführung • Innenkammer komplett aus Edelstahl • Hochleistungs-Umluftsystem • Präzise, programmierbare Temperatursteuerung • Mehrstufige Härtungsprogrammierung möglich • Geregelte Heiz- und Abkühlzyklen • Gleichmäßige Temperaturverteilung • 8 Vakuumanschlüsse im Innenraum installiert • Vakuumpumpe im Lieferumfang enthalten • Geeignet für Carbon, GFK, Prepreg, Werkzeuge und Composite-Bauteile Anwendungsgebiete: • Härten von Carbon-Prepregs • Herstellung von Verbundbauteilen • Komponenten für Luftfahrt und Motorsport • Produktion von Schiffbau-Composites • Nachhärtung von Werkzeugen und Formen • Trocknungs- und Thermobehandlungsprozesse • Forschung, Entwicklung und Prototypenbau Der Ofen befindet sich in sehr gutem Betriebszustand. Eine Besichtigung und Funktionsprüfung vor Ort ist möglich.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Dirancang khusus untuk usaha kecil dan pelapis velg. Sistem lengkap, terdiri dari: Oven pelapis bubuk, lebar x tinggi x kedalaman 1200 x 1600 x 1200 mm, 15 KW Hsdpfog Ngt Nox Aaijt Kabinet pelapis bubuk, lebar x tinggi x kedalaman 2000 x 2240 x 920 Pistol pelapis bubuk terbaru dari seri ROMER ProfiSpray Semuanya dijual dengan harga 17.990,00 (belum termasuk pajak), ditambah biaya pengiriman dan pemasangan.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 1 h, Oven Kamar Udara Panas/Minyak/Gas, Model SOS 80 O Mesin Pameran Data Teknis: Dimensi Ruang Penggunaan: Lebar sekitar 1200 mm, Tinggi sekitar: 1800 mm, Kedalaman sekitar: 3000 mm Kereta Pemuatan sesuai Permintaan Material: Casing bagian dalam: Pelat baja 0,8 mm, dilas atau dipaku dengan rapat Hjdec Nbitepfx Aaiot Casing bagian luar: Pelat baja 0,8 mm, pelat dasar baja 1,5 mm Pengecatan: RAL 1013, sebagai standar, dilapisi bubuk Material isolasi: Wol mineral bermerek Ketebalan isolasi: Dinding – 160 mm, Atap: hingga 240 mm, 100 kg/m3, rapat Data Kinerja: Jenis pemanas: Minyak, Daya pemanas: sekitar 80 KW 1 unit pembakar minyak @ 80 kW Total daya sambungan: sekitar 5,4 KW Rentang suhu: hingga 200°C, dapat diatur secara bertahap Perubahan dan kesalahan dalam data teknis, informasi, dan harga serta penjualan antara waktu pemesanan dan pengiriman dicadangkan.

Kondisi: baru, Tahun pembuatan: 2025, Model SLP-30/O Dimensi Kerja 1200 Lebar x 1800 Tinggi x 3000 Dalam Dimensi 1720 Lebar x 2610 Tinggi x 3300 Dalam Sumber Daya Listrik Daya Nominal 30 kW Tegangan 380V Frekuensi 50-60Hz Jenis Pintu: 2 pintu di kedua sisi - Oven tipe *pass-through* Kunci Anti-Ledakan Waktu Pemanasan 15-30 menit (180 °C) Hjdpsbuyrnofx Aaist Suhu Maks. 200 °C Transportasi: dapat dipilih Sirkulasi Udara Sirkulasi Pemanas Panel Pemanas Atap yang Dapat Diganti Aliran: Vertikal Kipas Dipasang secara radial pada panel yang dapat diganti Daya Motor 1,1 kW Kapasitas 6480 L Garansi 12 bulan MITRA BERBAHASA JERMAN DI JERMAN SILAKAN AJUKAN PERTANYAAN Waktu Pengiriman sekitar 16 hingga 22 minggu setelah pemesanan Biaya pengiriman akan dihitung secara individual. Kami juga menyediakan peralatan sesuai dengan keinginan Anda. Informasi lebih lanjut dapat ditemukan di Romer Deutschland Pengecatan bubuk, pengecatan elektrostatik, *Powder Coating*, *Jauhemaalaus*, bubuk plastik, Pengecatan bubuk, *thermoplastique*, Pengecatan bubuk, Pengecatan bubuk, *Порошковая окраска*, Pengecatan bubuk, kabin pengecatan bubuk Peralatan pengecatan bubuk Peralatan pengecatan bubuk Pengecatan bubuk Kabin untuk pengecatan bubuk Teknologi Permukaan Pistol bubuk Pistol bubuk Oven pembakaran Oven bubuk Oven industri OVEN INDUSTRI, Oven pembakaran dengan sirkulasi, Oven bubuk

Kondisi: baru, Tahun pembuatan: 2025, A typical coating line consists of surface pre-treatment (cleaning and/or application of a conversion coating), intermediate drying, electrostatic coating zone (booth / manual powder coating system), and an oven (curing oven). The workpieces are transported by a conveyor system. Our company, ROMER®, designs, manufactures, and installs complete powder coating lines. Hedpfxecv Nl Rs Aaist Our systems can be inspected and tested in Huerth, near Cologne. Request a tailored offer for a system customized to your application.