Beli Ant Mengangkat Tinggi bekas (19.922)

Kondisi: bekas, Dressing Arm RA 1, Dressing Range: Internal: 0.5 - 32 mm (104 - 162 mm) External: 0.5 - 22 mm Dressing Arm RA 2, Dressing Range: Lhodpfo Uryzex Aglob Internal: 154 - 210 mm External: 10 - 65 mm Dressing Arm RA 3, Dressing Range: Internal: 22 - 70 mm (66 - 120 mm)

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector Lhodpfxonwmwve Agljb - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – New item - : Price ex works including loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional uprights (or by varying the axle spacing). This example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Uprights: IPE 180 Single-sided uprights approx. 3,700 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity at 600 mm load center: 500 kg per arm / 2,700 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg Including longitudinal and diagonal bracing, c/c spacing = 1,300 mm, standard is 1.30 m – unless otherwise specified, we will supply the rack with a 1.30 m axle spacing. Other spacings available, e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or custom sizes! Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Lhedof Tv T Nspfx Agleb Supplied complete with all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: n.n.b., saluran warna: 2, berat kertas (min.): 40 g/m², lebar kertas (min.): 100 mm, lebar kertas (maks.): 520 mm, tinggi kertas (min.): 900 mm, tinggi kertas (maks.): 370 mm, panjang total: 2.700 mm, lebar total: 2.034 mm, tinggi total: 1.720 mm, persyaratan ruang panjang: 3.700 mm, lebar yang dibutuhkan: 3.000 mm, kebutuhan tinggi: 2.220 mm, pembacaan penghitung (hitam): 1.150, jenis arus masuk: AC (pendingin udara), arus masuk: 16 A, tegangan masuk: 200.210.220 V, Perlengkapan: dokumentasi / manual, ikuti melalui desktop Ljdpfow R Enmex Aglehb

Kondisi: baru, Tahun pembuatan: 2020, Single-sided cantilever rack, 6.30 m height, 1.20 m arms, 900 kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €3,732 (net)! Ljdpfx Agjfivg Solshb Transport costs within Germany (excluding islands): €490 (net)! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided uprights approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm, each with 3 height-adjustable arms - Load capacity with 600 mm load center: 900 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 900 kg = 3,600 kg - Profiles: Frame: IPE220, Arms: IPE100 - With longitudinal and diagonal bracing (center distance = 1,300 mm, standard is 1.30 m) - Other standard bay lengths available from stock: 1.00 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - From 1.50 m length onwards, a small surcharge applies to the stated price - Custom dimensions (other bay widths) are available on request, but incur an additional charge and have a longer delivery time as they are custom manufactured. - If you do not specify a different bay width, the rack will be delivered with a 1.30 m bay width. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4 m. - Delivery includes all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Lodpfx Ajfivg Rsglohb

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. Lsdpfefivhfex Aglshb - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2020, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport cost within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay width); the example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized Lhodsfivhgopfx Aglsb - IPE 160 / 100 - Each upright equipped with 2x3 adjustable arms, length 1.20 m, load capacity 750kg per arm - With bracing approx. 1.30 m - Rack uprights double-sided, approx. 3500mm high, hot-dip galvanized - Base and arm depth 1200 mm, each upright with 3 height-adjustable arms - Load capacity with a load center of 600 mm: 750 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a width of 1.50m a small surcharge applies to the above price! Special sizes (other bay widths) are also available on request, but incur an additional charge and longer delivery time, as they must be custom manufactured! If you do not specify otherwise, the racking will be supplied with a bay width of 1.30m. With a racking row of 4 uprights (3 bays), the length is approx. 4m. Supplied with all bolts and nuts (delivery within Germany via parcel from Würth), floor anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Single-sided cantilever rack, 3m height, 1.20m arms, 500kg per arm – New –: Price ex location, incl. loading! 1 racking unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, by omitting or purchasing additional frames, you can also configure longer or shorter racking units (or by adjusting the bay spacing); this example with 4 frames is simply the most common racking solution!! A hot-dip galvanized cantilever rack system, consisting of: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 adjustable cantilever arms each Load capacity with load center at 600mm: 500 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 500kg = 2,000 kg, arms made of IPE 80, With longitudinal and diagonal bracings, axle spacing = 1,300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay spacings) are also available on request, subject to surcharge and with longer delivery times as these need to be custom-made! If you do not specify other bay spacings, we will deliver the racking unit with a bay spacing of 1.30m. In this case, the length of a single row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany as parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us! Lhjdpfxsddmpvj Aglsb

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Length: 2800 mm, width: 800 mm, height: 2800 mm, supplied with manual, machine has seen little use. Ledpfohytxzox Aglehb

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: sistem udara terkompresi, A Zeilhofer hand manipulator is being offered for sale. Ledpfxou Hyl Ee Aglehb - The machine is in excellent condition and has seen very little use. - Lifting capacity: 250 kg – currently downgraded by us to 100 kg - Recently serviced and UVV safety inspected directly by Zeilhofer - The unit is mobile and can be moved with a forklift – no floor anchors required - Complete documentation and all paperwork available - Vacuum head is 360° rotatable and can be tilted by 90° A second device is also available, which lifts vertically (upwards). Pictures available upon request. An invoice will be provided.

Kondisi: bekas, Tahun pembuatan: 2007, Penilaian umum 1-5 (1 buruk, 5 seperti baru): 4/5 Sertifikat: CE, TÜV Aichi rm04b Tahun 2007 Jam operasi rendah Ketinggian kerja 6 m Berat 650 kg 0,78 x 1,30 m Ketinggian kerja: 600 cm Jenis: Listrik Ljdpfjxbr U Hox Aglshb Berat total (gvw): 650 kg Kapasitas angkat maksimum: 200 kg Jenis penggerak: Penggerak rantai Ketinggian angkat maksimum: 600 cm Negara produksi: Jepang

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: Res BS, Demag PK2 chain hoist crane lifting unit 250 kg / 500 kg Approx. 40 units available!!! Lsdpfx Agovzkylolshb 250 kg / 0.25 t lifting capacity – single fall – €500 500 kg / 0.5 t lifting capacity – double fall – €600 With dual lifting speeds, lifting height approx. 3–4 m Complete with pendant control and load hook Total weight approx. 40 kg, connection: 380V, 50Hz Top condition, fully functional. Not a worn-out or used-up unit! Just connect and start operating. Removed from ongoing operation. Item location: 75053 Gondelsheim See pictures

Kondisi: belum diuji (bekas), Tahun pembuatan: 2017, Fungsionalitas: belum diuji, tegangan masuk: 72 V, jenis pendinginan: air, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Set terdiri dari komponen berikut: Lhedpfx Asyaqbksglsb 2x Mesin las inverter HighPULSE 552 RS 2x Unit pendingin air WK-350 Unit pendorong kawat khusus DV-31 Twin + aksesoris tambahan (paket selang, torch) DETAIL MESIN Data listrik (mesin las) Rentang arus: 20 A – 550 A Rentang tegangan: 15 V – 41,5 V Tegangan jaringan: 72 V Arus jaringan: 35 A

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 11.440 h, DMG 5 axis Simultaneous HSC 30 Linear Tahun 2014 Kontrol Heidenhain TNC640 Perjalanan X320 / Y300 / Z280mm Sumbu B +/- 120 derajat Sumbu C 360 x 0,001 derajat HSK-E40, 40.000rpm Meja rotary swivel Touch probe Sistem pengukuran alat BLUM 3D Quick Set Siklus Application Tuning Semburan udara melalui spindle Sistem filter super halus dengan tooling ----- Obral Stok ----- Ljdpfjw Hxiwex Aglehb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MGB1320E, tinggi pusat: 180 mm, berat benda kerja (maks.): 100 kg, panjang penggilingan: 500 mm, diameter roda gerinda: 400 mm, lebar total: 14.150 mm, panjang total: 18.000 mm, tinggi total: 14.750 mm, diameter penggilingan: 320 mm, panjang benda kerja di antara senter: 350 mm, lebar roda gerinda: 50 mm, kecepatan spindel (maks.): 3.000 rpm, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Z: 150 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan sumbu Z: 1 m/menit, berat keseluruhan: 2.100 kg, kecepatan maksimum spindel benda kerja: 400 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Beijing No.2 Machine Tool (BEIER) Semi-automatic High-speed External Cylindrical Grinding Machine MBS1320E Lhodpfx Ajtr Azkjgleb Online production equipment; machine testing available; roundness within 0.001 mm Manufacturer: BEIER MACHINE TOOL WORKS CO LTD

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, AIDA AXEL-300 Produsen: AIDA Kapasitas: 30 ton SPM: 200~1000 Tinggi cetakan: 200~1000 mm Penyesuaian slide: 50 mm Luas slide: 550 x 320 mm Luas meja: 550 x 450 mm Motor utama: 11 kW Tahun Pembuatan: 11/1999 Lokasi: Korea Selatan Kondisi sangat baik Kondisi sepenuhnya berfungsi dan video operasi tersedia atas permintaan Tersedia dengan harga yang wajar Lodpfx Agsxuqzfslohb Feeder asli terpasang dan sudah termasuk.

Kondisi: baru, Tahun pembuatan: 2025, Eine kompakte Faserlaser-Blechschneidemaschine mit Vollschutz Kleine Stellfläche bei gleichzeitig vollständigem Schutz für erhöhte Sicherheit. Jeder Rahmen des Maschinenbetts wird nach dem Zapfen-Steck-Verfahren verschweißt, um optimale mechanische Eigenschaften, bessere Stabilität und hohe Festigkeit zu gewährleisten. Der ausziehbare Schneidetisch – auf Wunsch auch elektrisch betriebener Tisch – spart Platz und verbessert das Bedienerlebnis deutlich. Bequeme und schnelle Einhand-Bedienung zum Öffnen und Schließen; Die Tür des Laserschneiders ist durch ein Zahnstangen-Ritzel-Übertragungssystem kombiniert mit einem selbstverriegelnden Schneidesystem sicher und zuverlässig. Faserlaser-Schneidköpfe können herausragende Hindernisse erkennen, wodurch die Beschädigungsrate effektiv reduziert und die Wartungskosten der Laserschneidanlage gesenkt werden. Verarbeitbare Materialien: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W, 12000W Lhjdpfx Ashwrg Noglob Arbeitsbereich: 3048 x 1524 mm Schneidgeschwindigkeit: 0–100 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Dateiformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlung: Wasserkühlung

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 128 h, 2006 | Holland-Lift N165-12EL 18.50 m | Used Scissor Lift Table | 128 operating hours 📍Location: Lithuania 🚛 Delivery available to your location – Use our shipping calculator for transport cost estimates! 💰 Buy Now for EUR 9,800 or Make an Offer. Payment upon delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points: 28 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector’s Comment: Considering the age of the machine, all components and functions operate as expected. No major issues or anomalies were found during inspection. 📄 Want the full inspection report, extra photos, or a video? Tip: The reference "38101 Equippo" is commonly used to search for more information online. 💡 Why this machine and our service stand out: ✔ Comprehensive inspection by professionals ✔ Delivery direct to your jobsite ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking for other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Ljdpfxjyb Ui Us Agljhb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Manufacturer: KALTENBACH Model: KBC 350 NA Year of manufacture: 2008 Dimensions (W x H x D): approx. 220 x 200 x 150 cm, with chip conveyor, 3 roller conveyors Dimensions (W x H x D): approx. 220 x 80 x 60 cm, 2 of which include support table. We also offer: Lsdpfx Aget Ia Syjlshb 1. Kaltenbach KMR 100 AP 2008 (304096) 2. Kaltenbach KBC 350 NA 2008 (304133) 3. Kasto SSB 260 VA-CNC 2002 (6510 115 305) 4. Kasto SBA 280 AU 1998 (6406 102 056) 5. Kasto HBA 420 AU 1985 6. Kasto HBA 420 AU 1995 (6019 107 306) 7. Kasto HBA 420 AU 1995 (6019 159 107) 8. Kasto, model SSB 260 VA, year of manufacture 1994

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Available: 2 units! Condition must be assessed. It is possible to purchase the order pickers with a set of brand new batteries including a 2-year warranty for 3,500 euros, or for 3,000 euros with used batteries. Year of manufacture: 2017 Load capacity: 215 kg Lift height: 3000 mm Travel speed: 8 km/h Overall length: 1528 mm Battery voltage: 24V Model: EKM-202 Lhsdpjvday Hefx Agleb Negotiable for larger quantities, big discounts available! The agile and versatile EKM order picker is ideal for use in retail environments, for light maintenance tasks, or for order picking without pallets. A sturdy mast allows items to be lifted up to the third shelf level – making it the best alternative to a conventional ladder. Automatically closing doors ensure operator safety even at high lift heights. A sensor mat on the floor increases mobility within the operator cabin, allowing the operator to choose any position on the standing platform. The generously sized workspace provides the operator with more comfort when driving and standing sideways. Good visibility in the direction of travel is ensured. Ergonomically positioned controls enable simultaneous lifting and steering, making operation with the EKM highly efficient.

Kondisi: hampir baru (bekas), High-quality meltblown nonwoven production line A comprehensive machine inspection by the manufacturer’s customer service was carried out on 17 December 2025. Report to follow Operating hours: 80 hours (commissioning only) Price of a new machine: €7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical data • Working width: 1600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per metre width Ljdpfx Agjx Hx Rnjlshb • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heated rotary beam output: 65–172 kW • Winding unit: Contact winder with preset roll change • Maximum roll diameter: 1250 mm • Web width: 1700 mm • Winding tension: 10–100 N/m Additional equipment and accessories • 3-component dosing system • 80 mm seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutter blades • Central control panel with touchscreen and data input

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 5.321 h, 2006 | Holland-Lift B195-DL25 (21m) | Used Scissor Lift Table | 5321 hours 📍Location: Lithuania 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy now for EUR 13,200 or make an offer. Payment on delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 40 approved ✅ 0 incomplete ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: All functions are working, machine leveling takes some time, no problems during inspection. 📄 Want to see the full inspection, extra photos, or a video? Ljdpfxjyaug Rs Agljhb Tip: The reference "38099 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: bekas, jarak tempuh: 48.480 km, daya: 125 kW (169,95 hp), pendaftaran pertama: 01/2020, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, Tahun pembuatan: 2019, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1997, jam operasional: 7.594 h, kapasitas angkut: 2.500 kg, tinggi angkat: 4.950 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, produsen motor: Isuzu, panjang garpu: 1.150 mm, kondisi ban: 85 persen, berat keseluruhan: 6.744 kg, berat kosong: 4.244 kg, warna: kuning, ukuran ban: 7.00 x12, 6.00 x 9, Perlengkapan: boom yang dapat disesuaikan, hidrolik, kabin, pelindung depan, pelindung kepala, pencahayaan, For sale: Forklift truck - Hyster H2.50XMX, diesel engine by Isuzu, year of manufacture 1997. - Lifting capacity: 2.5 tons. - Sideshift. - Cabin heating. - Full lighting package. - Overall condition: very good. - Technical condition: very good. - Visual condition: very good. Ledpjudi Hqsfx Aglehb