Beli Arburg 221 bekas (340)

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical primary movements powered by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical primary movements with servo drives: dosing, injection, mould opening/closing, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Compact hydraulic unit with pressure accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine mounting plates with centring ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal injection unit 400 • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing unit D25 mm, high wear/ corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25) • Heating band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mould height adjustment • Prepared for mounting a linear robot on the fixed platen • Mould protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blower unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, switch cabinet, interfaces: • Selogica control • Software packages (Pos 555: Advanced mechanical cycle controls; Advanced movements; Production control; Optimisation/operator support; Quality assurance control; Documentation) • Temperature-controlled switch cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorisation via card, Euromap 65 (Pos 455/06) Rjdpfx Adex D Hgve Ror • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mould temperature measuring zones (Pos 469/12) • Additional heating band for nozzle (Pos 468/01) • Interface for HB-Therm temperature controllers (Pos 453/01) • USB-serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for colour dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/reject parts (Pos 375/00)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 37.049 h, gaya penjepit: 4.000 kN, berat keseluruhan: 21.000 kg, This Arburg 820 S 4000 - 2100 injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter ranging from 60 to 100 mm, and a maximum shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and offers a hydraulic pump drive power of 55 kW. Ideally suited for high-precision plastic injection moulding applications. Please contact us for more information about this machine. Clamping unit • Max. locking force: 150 kN • Max. opening force: 100 kN / increased: 800 kN • Max. opening stroke: 700 mm • Min. mould height: 350 mm • Max. platen distance: 1050-1550 mm • Tie bar spacing (clear): 820 × 820 mm • Mould mounting platens (W × H): 1171 × 1171 mm • Max. mould half weight: 4500 kg • Max. ejector force: 100 kN • Max. ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: Rsdpfxeydpvbs Ad Rer • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Colour: Plastic-coated structure (light grey / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Combined power sockets: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 A Injection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Max. theoretical shot volume (cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Max. shot weight (g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Max. injection pressure (bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Max. injection rate (cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Max. injection rate with accumulator (cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Max. screw surface speed (m/s): 0.38 | 0.28 | 0.28 • Max. screw torque (Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Max. nozzle contact force: 110 kN • Max. nozzle stroke: 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and weights (basic machine) • Clear length: 490 mm • Electrical connection (fusing) motor + heating: 250 A • Electrical connection (fusing) motor: 125 A • Electrical connection (fusing) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 68.463 h, diameter sekrup: 35 mm, Arburg 470 E 1000-700 ini diproduksi pada tahun 2011. Ini adalah mesin cetak injeksi listrik yang kokoh dengan gaya penutupan 100 ton dan diameter sekrup 25 mm. Mesin ini dioperasikan dengan 400V 3∼, 50Hz dan daya terpasang total 78kW, dirancang untuk performa yang efisien. Manfaatkan kesempatan Anda untuk membeli mesin cetak injeksi listrik Arburg 470 E 1000-700 ini. Hubungi kami untuk informasi lebih lanjut. • Tegangan operasi: 400 V, 3 fasa, 50 Hz • Tegangan kontrol: 230 V, 50 Hz; 24 V AC • Arus nominal motor: 61 A • Arus nominal pemanas: 58 A • Total arus nominal: 119 A • Total daya terpasang: 78 kW • Kalibrasi (tahun): 2027 • Unit seleksi: ya Rsdpfox D Rndex Ad Rsr • Pelat tunggal: ya • Jarak antar tie bar: 470 x 470 mm • Opsional: Penanganan Geiger

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 13.361 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 injection molding machine was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-driven dual-circuit pump system for precise movements. The SELOGICA direct control with a 15-inch touchscreen enhances user convenience. Take advantage of this opportunity to purchase this hydraulic Arburg 520S-1500-400 injection molding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced two-stage clamping program • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High-wear resistant version; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2: servo-driven dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: 3.6 kW each (230 V / 16 A) Rodpfx Adsyg I Ego Rjr • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, gaya penjepit: 2.200 kN, diameter sekrup: 70 mm, berat injeksi: 172 g, Arburg 570 S 2200-800/290 ini diproduksi pada tahun 2020. Mesin ini dilengkapi dengan sistem penggerak hidrolik dan kontrol Selogica untuk pengoperasian yang presisi. Dengan gaya clamping 2.200 kN dan diameter sekrup 40 mm, mesin ini sangat ideal untuk tugas injection molding yang detail. Manfaatkan kesempatan ini untuk membeli mesin injection molding hidrolik Arburg 570 S 2200-800/290. Hubungi kami untuk informasi lebih lanjut. Unit Pengunci • Jarak antara tie bar: 570 × 570 mm • Stroke pembukaan: 650 mm • Gaya ejektor: 70 kN • Stroke ejektor: 200 mm Unit Injeksi • Ukuran unit injeksi: 290 Rjdpfx Asx Nkp Ied Rjr • Tekanan injeksi: 2.500 bar • Volume shot: 188 cm³ Penggerak & Kontrol • Sistem penggerak: Hidrolik • Kontrol: ARBURG Selogica

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), diameter sekrup: 45 mm, Arburg Allrounder 630S 2500-675 ini diproduksi pada tahun 2003. Ini adalah mesin injection molding hidrolik dengan diameter screw 45 mm. Pertimbangkan kesempatan untuk membeli mesin injection molding hidrolik Arburg Allrounder 630S 2500-675 ini. Hubungi kami untuk informasi lebih lanjut. Redpeyaiziofx Ad Rer

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, gaya penjepit: 1.000 kN, diameter sekrup: 35 mm, berat injeksi: 132 g, berat keseluruhan: 3.650 kg, Arburg Allrounder 420C 1000-290 ini diproduksi pada tahun 2014. Mesin ini memiliki gaya penutupan sebesar 1000 kN, stroke pembukaan 500 mm, dan ukuran bidang penjepitan 570x570 mm. Berat tembakan maksimum adalah 132 g. Pertimbangkan untuk membeli mesin injection molding hidrolik Arburg Allrounder 420C 1000-290 ini. Hubungi kami untuk informasi lebih lanjut. • Stroke pembukaan: 500 mm Rodpfx Adjyglrws Rsr • Ukuran pelat penjepit: 570 x 570 mm • Volume maks.: 144 cm³

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 5.000 kN, berat keseluruhan: 26.400 kg, This 3-axis hydraulic injection moulding machine Arburg Allrounder 920S 5000-3200 was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range from 70 to 90 mm, and a maximum shot weight of up to 1,860 g. Take advantage of the opportunity to purchase this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Max. mould opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mould height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Weight of moving platen (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5 – 6.44 s • Total installed power: 96 kW • Colour: Structural light grey / Mint green / Red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection unit • Screw diameter: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticising capacity (PS): 185 / 215 / 250 kg/h • Max. injection pressure: 2,500 / 2,000 / 1,580 bar Rodpfx Aeydnigjd Rer • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heater capacity: 6 × 5,500 + 4,300 W • Installed nozzle heater capacity: 1,100 W • Oil tank capacity: 590 litres • Motor + heater fuse rating: 200 A • Motor fuse: 125 A • Heater fuse: 63 A

Tahun pembuatan: 2007, jam operasional: 88.893 h, Kondisi: siap digunakan (bekas), produsen pengendali: HAITIAN, Arburg A470 C 1500-400 ini diproduksi pada tahun 2007. Dilengkapi dengan sistem penanganan Haitian yang dipasang pada tahun 2022, penutup pelindung, serta konveyor untuk penempatan bagian. Dengan 88.893 jam kerja, pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Arburg A470 C 1500-400 ini. Hubungi kami untuk informasi lebih lanjut. Informasi tambahan Rodpfx Adex D Rbqe Rsr • Sistem penanganan Haitian • Penutup pelindung • Konveyor untuk penyimpanan bagian

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), berat keseluruhan: 28.400 kg, arburg-allrounder-920h-2020-en Rsdpfx Aox U Tqred Rjr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, diameter sekrup: 25 mm, Arburg 470 S 800-170 ini diproduksi pada tahun 2010. Ini adalah mesin cetak injeksi hidrolik dengan gaya penutupan 80 ton dan jarak antara tie bar 470x470 mm. Mesin ini beroperasi pada 400 V 3~ 50 Hz dan memiliki total daya terpasang 76 kW. Pertimbangkan untuk membeli mesin cetak injeksi hidrolik Arburg 470 S 800-170 ini. Hubungi kami untuk informasi lebih lanjut. • Jarak antara tie bar: 470x470 mm • Plat pemasangan tunggal: Ya • Tegangan operasi: 400 V 3~ 50 Hz • Tegangan kontrol: 230 V ~ 50 Hz, 24 V DC Redpfx Adsx D R Eps Rsr • Arus nominal motor/pemanas: 76 / 59 A • Arus nominal total: 135 A • Total daya terpasang: 76 kW • Opsi tambahan: Geiger-Handling

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Arburg Allrounder 1200T 800-150 ini diproduksi pada tahun 2006. Sebagai mesin injection molding vertikal, mesin ini menawarkan fungsionalitas tangguh untuk tugas pengolahan plastik khusus. Pertimbangkan kesempatan untuk membeli mesin injection molding vertikal Arburg Allrounder 1200T 800-150 ini. Hubungi kami untuk informasi lebih lanjut. Redpfx Aeyaizpsd Ror Keunggulan Mesin Keunggulan Teknis Mesin • Gaya tekan: 800 kN • Jarak batang penjepit: 1200 mm / diameter sekrup: 25 mm / berat bagian maks (g, PS): 45 / penarik inti: 1 • Konfigurasi: vertikal

Tahun pembuatan: 2008, jam operasional: 78.723 h, Kondisi: siap digunakan (bekas), diameter sekrup: 25 mm, Arburg 470 A 800-170 ini diproduksi pada tahun 2008. Mesin cetak injeksi vertikal dengan gaya penutup sebesar 80 ton, beroperasi pada 400 V 3∼, 50 Hz. Memiliki daya total terpasang 69 kVA. Pertimbangkan kesempatan untuk membeli mesin cetak injeksi vertikal Arburg 470 A 800-170 ini. Hubungi kami untuk informasi lebih lanjut. • Tegangan operasional: 400 V, 3~, 50 Hz • Tegangan kontrol: 230 V, 50 Hz • Tegangan kontrol: 24 V~ • Arus nominal motor/pemanas: 72 A / 58 A • Total arus nominal: 130 A Rjdeyq Rw Tspfx Ad Rer • Total daya terpasang: 69 kVA • Kalibrasi (tahun): 2027 • Unit seleksi: ya • Plat tunggal: ya • Jarak kolom: 470 x 470 • Opsional: Penanganan Geiger

Kondisi: baik (bekas), Tahun pembuatan: 2005, 18591 Redpexf T I Nefx Ad Ror

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 58 h, Allgemeine Daten Breite: 4.360 mm Tiefe: 1.718 mm Höhe: 3.910 mm Maschinengewicht: 7.600 kg Spritzaggregate Schneckendurchmesser: 35 mm Einspritzdruck: 2.500 bar Schließeinheit Schließkraft: 1.000 kN Diese Arburg ALLROUNDER 1200 t 1000 - 400 Spritzgießmaschine wurde im Jahr 2018 in Deutschland hergestellt. Sie verfügt über 58 Betriebsstunden. Die Maschine hat eine Schließkraft von 1.000 kN, befindet sich in neuwertigem Zustand und wurde ausschließlich zu Testzwecken verwendet. Die CE-Zertifizierung muss durch den Käufer erfolgen; ein Angebot eines Drittanbieters liegt ab 2.000 € vor. Rjdpex D Nc Hsfx Ad Rsr Anwendungsbereiche Spritzgießen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Arburg 221K-350-100 Clamping force: 35 tons Year of manufacture: 2002 Screw diameter: 25 mm Rsdpfxjwgc Dro Ad Rsr Shot weight: 49 cm³

Kondisi: diremajakan ulang (bekas), Arburg, Pengatur Pemanas Thermonic, Arburg Allrounder 4 unit regulator hampir baru. Disimpan sebagai suku cadang di bagian pemeliharaan. Redpjyvp Upsfx Ad Rer

Kondisi: sangat baik (bekas), Kami menawarkan lima silinder ARBURG: Rodpfx Ajxy Sx Nod Rsr 2 × 18 mm 2 × 20 mm 1 × 30 mm Salah satu silinder 18 mm kondisinya seperti baru. Silinder lainnya dalam kondisi sangat baik hingga luar biasa (lihat foto). Harga berlaku per unit.

Kondisi: bekas, Tahun pembuatan: 2007, ARBURG - ALLROUNDER 370U 600-290 - 2007 - Jarak batang pengikat 370 / ukuran mesin - Mesin dapat beroperasi secara horizontal, vertikal, atau miring Rsdpfx Adoyulhzj Rsr - Penanganan mould yang fleksibel - Gaya penjepit 600 kN = 60 t - Ukuran unit injeksi 290 / volume tembakan - Jam kerja 130000 - Termasuk sekrup baru yang sudah diganti - Tersedia beberapa unit lain, termasuk tipe S dan C

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Arburg conveyor belt (76), length 2.37 m, belt width 25 cm, year of manufacture 2019 Rodpfxsv I S Tto Ad Ror

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), de-to-hu Rjdpoyuyvaefx Ad Rjr

Kondisi: baik (bekas), Tahun pembuatan: 2006, gaya penjepit: 800 kN, Totale aansluitwaarde 21,7 kW Rodpfx Adeyux Uhj Rjr Pomp motor 18,50 kW Gewicht 7.400 kg

Kondisi: bekas, Tahun pembuatan: 2005, gaya penjepit: 25 kN, volume langkah: 440 cm³, tekanan injeksi: 1.550 batang, berat keseluruhan: 2.500 kg, jam kerja: 40.000 h, diameter konveyor sekrup: 25 mm, Basis pengiriman: FCA Pegnitz Rjdpfx Adsynbcns Rer Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194573, gaya penjepit: 1.000 kN, Here we offer a well-maintained injection moulding machine. We are also happy to accept well-kept machines from year of manufacture 2005 onwards as part exchange. Please offer us any machines that will become available from your operations. Important notice – Tax information and benefit for used machines From 01.07.2025, used machines are also eligible for a special depreciation of 30% per annum. In addition to the lower purchase price compared to a new machine, you can benefit from the same depreciation rates as with new equipment. Reference: Growth Booster, (§ 7 Paragraph 2 EStG-E) Arburg 2-colour injection moulding machine with complete maintenance history, featuring both horizontal and vertical injection units. Machine No.: 194573 Arburg 420C 1000-150/150 Year of manufacture: 2004 Control system: Selogica Extras: - 2x core pull (simultaneous movement, adjustable holding pressure) - Intermediate stop for hydraulic rotary control - CF card drive - Interface for production control - Interface for dosing unit - Interface for conveyor belt - Prepared for Multilift - Selector unit with connection - Extended installation height to 350 mm - Highly wear-resistant screws - Air blow-off device connection - 2-colour / horizontal & vertical unit - Including disks/CF cards - complete documentation/manuals Clamping force: 100 tons / 1000 kN Tie bar spacing: 420 x 420 mm Mould plates: 570 x 570 mm Opening stroke: 500 mm Max. daylight: 850 mm Mould height: 350 mm 1st Injection unit (150) Screw: 30 mm (highly wear-resistant) Shot weight: 65 g Shot volume: 78 ccm Injection pressure: 2210 bar 2nd Injection unit (150) Screw: 25 mm (highly wear-resistant) Shot weight: 45 g Shot volume: 54 ccm Injection pressure: 2500 bar Weight/Dimensions Dimensions: 4.63 x 1.3 x 3.9 m (L x W x H) Weight: 4,000 kg Connected load: 125 A pre-fuse Delivery free to buyer’s business address up to the yard – Unloading is the buyer’s responsibility & risk from the truck loading area. The machine is offered fully tested and functional. For your information about us and the machines on offer: - We only sell machines that we have purchased ourselves directly from running production, from our warehouse in Hannover - All machines undergo inspection and testing prior to dismantling Rodpfx Aehyumgjd Rsr - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from successful businesses where maintenance and care are a standard practice - All machines offered are available for inspection at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 53.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206432, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 570 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, lintasan ejektor: 225 mm, berat keseluruhan: 7.450 kg, Perlengkapan: dokumentasi / manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine for sale: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for more than 25 years. Current note – Tax advisory and benefit for used machinery As of 01/07/2025, used machinery is also eligible for a special depreciation allowance of 30% per annum for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well-maintained – German origin Extras: - Complete high-wear resistant thermoplastic injection unit, 50 mm - Screw in HC (high corrosion) version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastics processing - Open nozzle, 50 mm - Extended nozzle tip, 50 mm - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping plate set, 570 mm, central ⌀ 125 mm - 2x air eject systems with pressure regulator - Air eject connection 1 - Selector unit connection - 1 core pull for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67 standard), 50-pin - Central computer interface ARBURG - Additional socket distributor: 1 CEE, 1 Schuko Rjdpfx Aew Tt R Iod Rjr - Serial printer interface, USB - CompactFlash interface for data storage - Operator authorization via chip card according to EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Colour dosing unit interface - Manually adjustable cooling circuits - Machine-related cooling circuits regulated - Advanced monitoring equipment package - Advanced movement package - Production control equipment package - Optimization/operation support package - Quality assurance equipment package - Documentation equipment package Complete documentation included Injection unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Injection volume: 392 cm³ Clamping unit: - Clamping force: 200 tons / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platen: 795 x 795 mm - Minimum mould height: 300 mm - Maximum platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Drive capacity: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Loaded free onto buyer’s truck or delivered free to destination against freight charge Available from our Hannover/Germany warehouse Information regarding the machines we offer and our company: - We only sell our own stock, machines purchased from ongoing production, available from our Hanover warehouse - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from reputable companies with consistent maintenance and care - All machines offered can be inspected at our warehouse