Beli Bale Clamp bekas (9.241)

Kondisi: bekas, Deskripsi Dijual satu set blok penjepit tenaga pneumatik SCHUNK 2-rahang (penjepitan sentris) termasuk katup tangan/katup kontrol (sesuai gambar) dan rangkaian lengkap rahang tambahan/penjepit (berbagai desain, termasuk rahang prisma/V). Ideal untuk pembuatan perlengkapan, produksi massal, dan penjepitan fleksibel. Hjdpfx Adsyp Iflo Rjk Tersedia 2 unit Stroke per rahang: 8 mm Harga: Netto/unit Pengambilan di 57439 Attendorn. Pengiriman memungkinkan.

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 15.606 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, daya: 30 kW (40,79 hp), laju aliran volumetrik: 160 m³/jam, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presto GmbH & Co. KG, model HPK 50 B. Hodpfx Aoyplwfod Rjk The following technical data has been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (main control valve on hydraulic block replaced) and tested in continuous operation, both in manual and automatic mode. The machine documentation is available in German. An inspection of the press is possible in our workshop by appointment. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 390002114, gaya penekanan: 12 t, HSM V-Press 610 baler – Year of manufacture 2013 – 120 kN pressing force Hedeynwqzspfx Ad Rok Sale exclusively B2B For sale is a fully functional vertical baler HSM V-Press 610, in well-maintained used condition. Ideal for commercial, industrial, logistics, or waste management operations for volume reduction of cardboard and plastic film. 🔧 Technical specifications - Manufacturer: HSM - Model: V-Press 610 - Year of manufacture: 2013 - Pressing force: 120 kN - Power supply: 3~400 Volt / 50 Hz - Motor power: 3.0 kW - Rated current: 6.5 A - Machine number: 6110.134 - Serial number: 390002114 Equipment & features - Electronic control with display - Automatic pressing cycle - Mechanical door lock with safety interlock - Bale strapping with plastic tape (reel holder included) - Emergency stop switch - Heavy-duty industrial design "Made in Germany" - GS-certified 📦 Suitable for - Cardboard - Mixed paper - Plastic film Efficient volume reduction for lower disposal costs. 📍 Condition - Used, operational - Normal signs of wear (see photos) - Regularly serviced - Safety inspection stickers available Viewing possible by appointment. 💶 Sale conditions - Sale exclusively to commercial buyers - Sale excludes warranty and guarantee - Pickup by buyer - Loading possible by arrangement

Kondisi: bekas, Tahun pembuatan: 2012, gaya penekanan: 40 t, Pabrikan: HSM Hsdex H R U Sjpfx Ad Rek Tipe: HL 4010 Li Tahun pembuatan: 2012 Gaya tekan: 40 t

Tahun pembuatan: 2019, Kondisi: bekas, berat keseluruhan: 1.400 kg, pusat beban: 600 mm, kapasitas angkut: 12.000 kg, jangkauan kerja: 2.200 mm, nomor mesin/kendaraan: 449297, Pabrikan: Durwen Tipe: 805.5122-12.01 Sambungan: Tipe Pin / Pemasangan Langsung Desain: Bale Clamp dengan Side Shift Tahun Pembuatan: Dimensi: • Lebar total: 2240 mm • Tinggi konstruksi tanpa kisi: 930 mm • Tinggi total dengan kisi: 1200 mm • Ukuran dalam antara penyangga: 530 mm Lebar Pembukaan: • min: 200 mm • maks: 2200 mm Kapasitas / Performa: • Kapasitas angkat: 12000 kg • Titik berat beban: 600 mm Bobot: • Berat sendiri: 1400 kg • Dimensi offset: 450 mm Perlengkapan: • Dilengkapi dengan side shift • Sistem hidrolik berfungsi penuh • Lengan penjepit tipe heavy-duty Hedpoxw I E Hofx Ad Rsk

Kondisi: baik (bekas), Clamping plate, welding table, straightening plate -Clamping plate: steel, with vise -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm Hedpfxeft Tcio Ad Rok -Plate is mounted on a steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Kondisi: baik (bekas), Tahun pembuatan: 1994, 1 Hedpfx Ajyibx Aed Rjk

Kondisi: baik (bekas), Tahun pembuatan: 1994, Ablak bewerking lijn, CNC raamproductie installatie, raamhoek installatie, opspaninrichting - Fabrikant: Gubisch, opspaninrichting uit raamproductie installatie type DST H - Slag: 180 mm - Motorreductor: SSB type SSB DS-SgFFH008 0,25 kW / 405/57 omw/min - Encoder: ferrocontrol SAE-1020 H - Aantal: 2 x opspaninrichting beschikbaar - Prijs: per stuk Hedpfx Ajyibvhed Rsk - Afmetingen: 850/450/H240 mm - Gewicht: 42 kg/stuk

Kondisi: bekas, tech-001 Hedoyimykopfx Ad Rek

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 1 pasang blok prisma dengan penjepit Prisma sudut 100x62x48 mm Hsdpfoym U H Rex Ad Rsk Berat: 4 kg

Kondisi: sangat baik (bekas), Penjepit gantung, penahan rel helm, rel helm, rel geser, penahan rel -Pabrikan: Helm, penjepit gantung penahan rel galvanis kuning -Tipe: 1508 -Dimensi: lihat foto -Jumlah: tersedia 30x penjepit gantung -Harga: per buah / minimal pembelian 2 buah -Dimensi: 90/70/H120 mm -Berat: 1,2 kg/buah Hsdev R Td Sopfx Ad Rsk

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 54 t, tegangan masuk: 400 V, daya: 4 kW (5,44 hp), frekuensi input: 50 Hz, Kami menawarkan mesin press bal bekas HSM 500.1 V1 ini, tahun produksi 2000. Hsdpjym Nmrsfx Ad Rok Model: HSM 500.1 V1 Nomor mesin: 6132.234.0 Nomor seri: 210183092 Tekanan kerja: 54 t Tegangan: 400 V Frekuensi: 50 Hz Daya motor: 4 kW Arus nominal: --- A Tahun produksi: 2000 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami melalui telepon.

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 990 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), laju aliran volumetrik: 643 m³/jam, Good day, We hereby offer you, subject to prior sale, a used baler including conveyor belt, wire-tying stations, and bale slide from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Hjdjymmtcopfx Ad Rsk Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions incl. conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film materials. The baler is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Kondisi: baru, Meja sinus ganda dengan pelat magnetik kutub halus Pelat magnetik dengan sakelar mekanis ON/OFF. Konstruksi presisi dan stabil. Dapat dimiringkan pada 2 sumbu. Untuk penjepitan dan pemesinan benda kerja pada sudut mana pun yang diinginkan. Daya tarik merata pada permukaan kutub. Pengaturan sudut yang tepat dengan blok pengukur akhir. Panjang: 300 mm Lebar: 150 mm Tinggi: 142 mm Hjdpfx Aoymzpfsd Rsk Sudut: 0–60° Berat: 37,5 kg

Kondisi: baru, #de-tisch-maschine-1 Hsdpsupxmfefx Ad Rok

Kondisi: baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Mesin press kanal otomatis BOA Continu 25 LB + konveyor sabuk. Mesin press dalam kondisi baik dan selalu dirawat secara berkala. Pompa Denison baru saja mengalami perbaikan total. Berfungsi normal dan terus digunakan. Silakan hubungi kami untuk informasi lebih lanjut. Hedpfx Ajw S Tv Ued Rek

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, Technical Data: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Hjdpfx Adoygud As Rok Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening (W x L): 970 x 1,800 mm Bale dimensions (W x H x L): 1,100 x 750 x 600–2,000 mm Maximum bale weight: up to 700 kg or 800 kg, depending on material The baler feed system comprises the following components: - 1 fully enclosed STADLER chain conveyor with corresponding shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire spool carts - 1 multi-control unit for the baler - Complete engineering documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Binding type: Wire Suitable materials: plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles The plant is operational and can be inspected during operation. The machine will be dismantled on 16th February and can then be inspected at our premises. Available immediately!

Kondisi: bekas, de-to-en-001 Hedsxxmf Uopfx Ad Rek

Kondisi: bekas, Rahang mesin hidrolik, penjepit tekanan tinggi KESEL ARNO Lebar rahang: 200 mm Tinggi rahang: 60 mm Gaya penjepit: 8 ton Rentang penjepitan: 0 hingga 370 mm Lebar bukaan maksimal: 373 mm Tinggi rel pemandu: 140 mm - 2 rentang penjepitan dapat diatur melalui pin - Pelat putar Dimensi (P x L x T): 900 x 400 x 210 mm Berat sendiri: 125 kg Hsdpfx Aded Amwis Rsk Kondisi baik

Kondisi: bekas, Ragum mesin hidraulik, penjepit tekanan tinggi ARNOLD / FRESMAK Lebar rahang: 160 mm Tinggi rahang: 50 mm Gaya penjepit: 5 ton Rentang penjepitan: 0 hingga 305 mm Lebar pembukaan maks: 308 mm Hodpfsxp R E Tsx Ad Rsk Tinggi rel pemandu: 112 mm - 2 rentang penjepitan dapat diatur dengan pin, 0 hingga 158 dan 148 hingga 308 mm - dengan pelat putar Dimensi P x L x T: 580 x 325 x 165 mm Berat bersih: 65 kg Kondisi baik

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lebar rahang: 16 mm, tinggi rahang: 19 mm, Ragum Erodi Flat, bekas Merek: Matchling Tipe: V1650 Panjang: 100 mm, lebar: 100 mm, tinggi: 16 mm (tanpa spindle) Material: Niro Hodoymdiuepfx Ad Rsk Lebar rahang: 16 mm Rentang penjepitan: hingga 48 mm Tinggi rahang: 19 mm Fungsi penarik ke bawah Tahan karat Dalam kotak kayu

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, lebar rahang: 20 mm, tinggi rahang: 19 mm, Ragum erosi datar Merek: Matchling Hedpoymdamsfx Ad Rok Tipe: V2075 Panjang: 125 mm, lebar: 100 mm, tinggi: 20 mm (tanpa spindle) Material: Niro (baja tahan karat) Lebar rahang: 20 mm Rentang penjepitan: sampai 75 mm Tinggi rahang: 19 mm Fitur penarik ke bawah Tahan karat Dalam kotak kayu

Kondisi: bekas, 344de12d-cfad-42a6-93f4-27ca7b3b3ba3 Hodjt H Tuxopfx Ad Rjk

Kondisi: bekas, Tahun pembuatan: 1994, jam operasional: 21.900 h, Fungsionalitas: berfungsi sepenuhnya, bale-press-avermann-type-avos-1411-37-60-pressing-force-60-t-yea r-1994-good-condition-with-conveyor-belt Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Operating hours: 21,900 Pressing force: 60 t Drive power: 37 kW Hodsyhcybjpfx Ad Rek Feed opening: 1,400 x 1,100 mm Throughput (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350–550 kg Tying: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The press is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of delivery. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the accuracy of the information provided or for any errors. This offer is subject to prior sale, non-binding, and may be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, prepayment, without warranty or guarantee.

Kondisi: bekas, Detail teknis: Hsdpfx Asu N Ea Hjd Rsk Lebar: 1270 mm Kedalaman: 1000 mm Tinggi: 1600 mm Tersedia 3 buah sudut penjepit Alur-T sesuai DIN 650: a=35 mm; b=60 mm; c=27 mm; h=65 mm Harga per sudut