Beli Baler bekas (314)

Kondisi: baik (bekas), Tahun pembuatan: 1987, Rotary compactor with continuous feed capability. Manufacturer: Bergmann Model: PS 8100-L Year of manufacture: 1987 Overall dimensions: 1500 x 1600 x 2200 mm Weight: 800 kilograms Usable size: - Grinding drum diameter: 1040 mm - Grinding drum height: 850 mm Grinding drum speed: 8 rpm Bjdpfxek E Exqs Abkslr Electrical data: Voltage: 220 / 380 V Electrical power: 1.1 kW

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Connected load: 15.5 kW, weight: 6.8 t. Blsdpoip D Rzefx Abksr

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Blodpjvwlqqofx Abksr Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Mesin Press Bal Orwak Compactor 3150 Kondisi sangat baik Bsdpew Rn U Nefx Abkolr

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 20.580 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, arus masuk: 59 A, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.750 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), lebar transportasi: 2.300 mm, panjang transportasi: 8.500 mm, kapasitas tangki: 300 l,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Bale Press, Bramidan B20 – used - : Price ex-location: €7,750 (net) Bsdporl I Ivefx Abkjlr Manufacturer: Bramidan Model: Vertical Baler B20 Year of manufacture: 2018 Bale weight: Cardboard (kg): 200-250 Plastic film (kg): 250-300 Pressing force: 20 t Bale dimensions WxDxH (mm): 1200 x 800 x 800 Feed opening WxH (mm): 1200 x 480 Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Average cycle time (s): 36 / 21 Dimensions WxDxH (mm): 1775 x 1030 x 2790 Transport height: 2.58 m Weight (kg): 1250 Stroke (mm): 750 Number of ties: 4 Type of tying: Strapping band Ejects finished bale easily: Yes Automatic bale ejection: Yes The classic among material balers The B20 is versatile and widely used. Materials must be “dry & soft.” Particularly suitable for materials such as cardboard, paper, cartonboard (PPK), and plastic film. Stackable bales, up to 900 kg per pallet Bales can be stacked 2 or 3 high on a pallet, allowing significant space savings. Easy bale strapping Automatic bale ejection Short cycle times thanks to high-speed operation Front-mounted strap spool allows placement directly against the wall Pallet-sized bales, suitable for covered outdoor storage 3xx230x-440 4kW Ampere: 25/16 Noise level: 62-64 dB Condition: good – very good Availability: immediately Location: 09116 Chemnitz

Tahun pembuatan: 2008, Kondisi: baik (bekas),

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Pressing force: 50 t, Opening dimensions: 870 x 1500 mm, Bale dimensions: 1500 x 1100 x 1100 mm, Bale weight: 450 kg, Length: 1524 mm, Width: 2100 mm, Height: 3217 mm, Weight: 1.93 t, Operating hours: 18 h. Bjdoirakgjpfx Abkelr

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, tahun perombakan terakhir: 2024, en-GB Bsdpfx Abou Thhrekslr

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF450HD Special Baler is the ideal machine for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic drums and plastic packaging. It can also significantly reduce the volume of used tires and car bumpers. The baler stands out due to its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. By compacting these waste and recyclable materials, you can achieve up to 90% volume reduction, significantly lower your disposal costs, and return the material efficiently into the recycling loop. Pressing force: 30 tons Bale weight: up to 450 kg (material-dependent) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Filling opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amps Power supply: 380-400 V (3 phase) Noise level: 68 dB Features: - Extra-long dual cylinders for uniform and early compaction of material - User-friendly lever operation - Bale ejector for safe bale removal - Extra material retention claws to minimize material spring-back - Holder for 4 rolls of strapping tape - Premium quality, Made in Europe Suitable for compacting: - PET bottles - Food cans and tins - Plastic drums and packaging - Used tires and bumpers - Big bags - Cardboard and film - Difficult-to-compact recyclables Bledpfx Abjvug Ekokor Additional options: - Annual service with safety inspection (UVV) - Machine finish according to RAL color chart - PLC control with automatic press cycle, bale-ready indication, and key-operated E-stop - Vertical door - Strapping tape / strapping wire - 11 kW, 32 Amp motor option The demo video shows the BTS-MF550HD Special Baler. Alternate terms: can baler, can press, PET baler, PET press, tire baler, tire press, scrap tire baler, baling press, waste baler, cardboard baler, film baler, paper baler, scrap paper baler, waste press, waste compactor, residual waste press, recyclables compactor.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, jam operasional: 18.819 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.085 mm, panjang bukaan pengisian: 2.815 mm, panjang bal: 1.200 mm, lebar bal: 100 mm, tinggi bal: 800 mm, berat bal: 400 kg, lebar total: 3.140 mm, tinggi total: 2.900 mm, panjang total: 8.840 mm, berat keseluruhan: 7.380 kg, tinggi transportasi: 2.900 mm, daya: 9 kW (12,24 hp), tahun perombakan terakhir: 2023, lebar transportasi: 2.400 mm, panjang transportasi: 5.650 mm,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Two bale presses, Bramidan X30 – used – : Price (for both together) ex location: €17,500 (net) Please note that one of the presses requires repair – a cost estimate of approx. €1,500 (net) is available! Manufacturer: Bramidan Model: X30 AD Machine number: PEY395533 (second number on request) Year of manufacture: 2018 Pressing force: 30 t Bale size (WxDxH, mm): 1200 x 800 x 1000 FILLING OPENING (WxH, mm): 1090 x 655 BALE WEIGHT: Cardboard (kg): 275-350, Plastic film (kg): 325-425 Material types: Cardboard, plastic film, paper, PET bottles, aluminum cans, tin cans, rigid plastics, textiles, styrofoam. 3 x 230 – 400V, 50Hz, Amps: 25/16 dB: 59–60 Weight: 1,650 kg Condition: good – very good Bodpfetq Hrijx Abkelr Availability: immediately Location: 21465 Reinbek

Tahun pembuatan: 1994, Kondisi: siap digunakan (bekas), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (L/W/H): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine exhibits a malfunction due to moisture and should be inspected. Bodpfxeip D Rpo Abkjlr

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF450HD Special Baler is the ideal baler for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing bulky items like used tires and car bumpers to a minimum volume. The baler stands out with its simple and safe operation and large feed opening, making it perfect for medium to high material volumes. By compacting these waste/recyclable materials you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return materials to the recycling stream. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Press cycle time: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long twin cylinders for even and early material compaction User-friendly lever operation Bale ejector for easy bale removal Additional retaining claws to reduce material spring-back Holder for 4 rolls of strapping band A quality product "Made in Europe" Suitable for compacting: PET bottles Food cans and tin containers Plastic canisters and plastic packaging Used tires and bumpers Big bags Cardboard and film Difficult-to-compact recyclables Bjdpfovug Dyjx Abkjlr Additional options: Annual maintenance with UVV inspection Machine color as per RAL PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Vertical door Strapping bands / strapping wire Motor 11 kW 32 Amp The demo video shows the BTS-MF550HD Special Baler. Can compactor, can baler, PET baler, PET press, tire baler, used tire baler, tire press, can press, baler, paper press, waste paper press, cardboard press, cardboard baler, film press, paper baler, waste baler, waste compactor, waste press, residual waste press, recyclables press.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 200 kg. Different materials can be collected in two or more adjacent pressing chambers; once a chamber is full, the movable press head is rolled over and the material is compacted. By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and return the material to the recycling loop in a proper manner. Pressing force: 16 tonnes Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Feed opening: 1100 W x 800 H mm Pressing time: 34 seconds Motor: 2.2 kW / 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retainer claws to reduce material spring-back Short handling times as one chamber always remains available for loading Strapping band holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Big Bags Clothing Light packaging materials Additional options: Annual maintenance with UVV inspection Machine color per RAL PLC control with automatic press cycle, bale-ready indicator and E-stop with key Additional press chambers (up to 6 total) Strapping bands Power supply 380 - 400 V (3 phases) Bljdpfx Aovugz Eebkjr Double-chamber baler, baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste compactor, recycling press, refuse compactor, waste press, residual waste press

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF75MK is the ideal multi-chamber baler for compressing your loose cardboard and film waste into a bale weighing up to 75 kg. Various materials can be collected in two or more press chambers arranged side by side; once a chamber is full, the mobile press head is moved over it and the material is compressed. By compacting this waste/recyclable material, you achieve a volume reduction of up to 90%, significantly reduce disposal costs, and properly reintroduce the material into the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 700 H (variable) x 700 W x 500 D mm Machine dimensions: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Transport height: 2005 mm Filling opening: 700 W x 500 H mm Pressing time: 35 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for easy bale removal Retainer to minimize material spring-back Quick handling as a chamber is always free for loading Strapping tape holder A quality product "Made in Europe" Suitable for compacting: - Cardboard - Foils - Big bags - Clothing - Light recyclables Additional options: - Annual maintenance including safety inspection (UVV) Bedpfsvugzrox Abkelr - Machine colour according to RAL - PLC control with automatic press cycle, bale-ready indicator, and emergency stop with key - Additional press chambers (up to 6 in total) - Strapping tapes Twin-chamber baler, paper baler, wastepaper press, cardboard baler, cardboard press, film baler, paper bale press, waste baler, waste press, recyclables press, waste compactor, trash press, residual waste press

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 500 kg. Thanks to its compact design, it is especially suitable for premises with limited height. The baler impresses with its straightforward and safe operation, as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Bjdpfx Aovugzfjbkjlr Pressing force: 50 tonnes Bale weight: up to 500 kg (material-dependent) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Feed opening: 1400 W x 680 H mm Pressing cycle time: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB PLC control with automatic press cycle, Bale-ready indicator and emergency stop with key Web-bale ejector for easy bale removal Retaining claws to reduce material spring-back Low overall height: perfect for rooms with restricted ceiling height Hour meter Holder for 6 rolls of strapping tape A quality product "Made in Europe" Suitable for compacting: Cardboard Films Big bags Cans and PET bottles Light recyclables Additional options: Annual maintenance with UVV inspection Machine color per RAL Strapping tapes Baler, cardboard baler, waste paper baler, carton press, cardboard press, film baler, paper baler, waste baler, waste compactor, waste press, recycling press, refuse compactor, refuse press.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Baler BTS-MF75 in stock and immediately available The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into bales of up to 75 kg. With a special pressing insert, it is even suitable for compressing individual metal and plastic containers as well as cans. The baler impresses with its simple and safe operation as well as its large loading opening. By compacting these waste materials/recyclables, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure correct reintegration of the material into the recycling process. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (variable) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Feed opening: 700 W x 698 H mm Pressing cycle time: 24 seconds Motor: 1.5 kW, 13 Amp Power supply: 230 V (single phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy bale removal Retaining claws to minimize material spring-back Holder for strapping bands A quality product “Made in Europe” Suitable for compacting: Cardboard Films Cans and light metal containers Plastic canisters and lightweight plastic containers Clothing Light recyclables Available options: Bledpfx Asvah S Aobker Annual maintenance with UVV safety inspection Custom machine finish to RAL colour Can pressing insert PLC control with automatic pressing cycle, bale-ready indicator, and emergency stop with key Strap bale ejector + PLC (replaces bale trolley) Strapping bands Power supply 380–400 V (3-phase) Baler, paper baler, waste paper baler, carton baler, cardboard baler, film baler, paper bale press, waste baler, waste compactor, refuse press, residual waste press

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF550HD Special Baling Press is the ideal machine for compacting challenging materials such as used tyres, CRT computer housings, cans and metal containers, big bags, plastic canisters and packaging, and even passenger car bumpers, reducing their volume to a minimum. The baler impresses with its easy and safe operation and large feed opening, making it ideal for medium to high material throughput levels. By compacting these waste and recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and return the material properly to the recyclable stream. Pressing force: 50 tonnes Bale weight: up to 550 kg (depending on material) Bale size: 1200 H (variable) x 1500 W x 800 D mm Machine dimensions: 3570 H x 2115 W x 1200 D mm Machine weight: 1935 kg Transport height: 2500 mm Feed opening: 1500 W x 780 H mm Pressing cycle: 50 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3-phase) Noise emission: 68 dB Features: - Extra-long twin cylinders for uniform and early material compaction - User-friendly lever operation - Bale ejector for easy bale removal - Additional material retainers to reduce material spring-back - Holder for 5 rolls of strapping tape - A quality product 'Made in Europe' Suitable for compacting: - Used tyres - Food cans and tin containers - Plastic canisters and packaging - Bumpers - Big bags Bsdozd Rvopfx Abkjlr - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with safety inspection (UVV) - Machine colour according to RAL - PLC control with automatic pressing cycle, bale-ready indicator, and e-stop with key - Vertical door - Strapping bands / wires - 11 kW 32 Amp motor Used tyre press, tyre baler, can baler, baling press, paper baler, cardboard baler, film baler, waste baler, waste compactor, residual waste press.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF450 is the ideal baler for compacting your loose cardboard and film waste into bales of up to 450 kg. This baler impresses with its simple and safe operation, as well as a large feed opening, making it perfect for high material throughput. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the material to the recycling loop. Pressing force: 30 tonnes Bale weight: up to 450 kg (material-dependent) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Pressing cycle: 40 seconds Motor: 5.5 kW, 16 Amp Bledpfsvamafsx Abker Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Double cylinder for uniform material compaction User-friendly lever-operation controls Bale ejector for easy removal of bales Retainers to minimize material spring-back Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big bags Textiles Lightweight recyclables Additional options: Annual maintenance with UVV safety inspection Machine color according to RAL PLC control with automatic press cycle, bale finished signal and E-stop with key Vertical-loading door Strapping bands Motor 11 kW, 32 Amp Baler, cardboard baler, waste paper baler, cardboard compactor, cardboard press, film baler, paper baler, waste baler, waste compactor, recyclable press, refuse compactor, refuse press, residual waste compactor

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF60HD special baler is ideal for compacting difficult and tough materials such as cans, PET bottles, metal buckets, and other tin containers. It is also highly effective at minimizing the volume of plastic materials. This specialist baler stands out due to its user-friendly operation and large filling chamber. Finished bales can be easily removed using the automatic bale ejector. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, resulting in significant savings on disposal costs while ensuring proper recycling of the materials. Pressing force: 13 tons Bale weight: 25 – 60 kg (depending on material) Bale size: 650 H (variable) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Filling opening: 600 W x 400 H mm Pressing cycle: 25 seconds Motor: 2.2 kW, 16 amp Power supply: 230 V (single phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal of bales Retaining claws to reduce material spring-back Cross-tying for secure bale integrity Strapping band holder A quality product “Made in Europe” Suitable for compacting: PET bottles Cans and metal containers Canisters and plastic containers Cardboard and film Additional options: Bljdevbq Rkopfx Abkjr Annual maintenance with safety inspection (UVV) Custom machine color (RAL) Strapping bands Power supply 380–400 V (three-phase) PET baler, PET bottle baler, can baler, special baler

Kondisi: baru, Tahun pembuatan: 2025, The BTS film compactor is the perfect solution for keeping troublesome and bulky packaging film under control. Thanks to its space-saving footprint and stable construction, you can easily reduce all your film waste to a fraction of its original volume. The retention ring in the film compactor prevents unwanted expansion, keeping the film securely in place. Filled film bags can subsequently be compressed into bales using a baler or disposed of in a recycling container. By compacting this waste/recyclable material, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and ensure the material is properly returned to the recycling stream. Dimensions, film compactor: 1000 H x 450 W x 420 D mm Weight, film compactor: 5.5 kg Colour, film compactor: RAL 9006 silver Film bag volume: 240 litres Filling weight film bag: up to 15 kg Easy collection of packaging films Clean and safe workspaces Retention ring prevents unwanted expansion of film material Optimal utilization of waste bags Reduces the frequency of waste collection and thus disposal costs A high-quality product "Made in Germany" Suitable for compacting: Films Bsdpfxjvbrfce Abkslr Foam films Additional options: BTS film bags 240 ltrs Film compactor available in custom RAL colour (for orders of 40+ units) BTS baler for films Film compactor, compaction stand, film collector, film disposal

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 200 kg. Different materials can be collected in two or more adjacent pressing chambers; once a chamber is full, the movable press head is rolled over and the material is compacted. By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and return the material to the recycling loop in a proper manner. Pressing force: 16 tonnes Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Feed opening: 1100 W x 800 H mm Pressing time: 34 seconds Motor: 2.2 kW / 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retainer claws to reduce material spring-back Short handling times as one chamber always remains available for loading Strapping band holder Bodjva Hupepfx Abkelr A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Big Bags Clothing Light packaging materials Additional options: Annual maintenance with UVV inspection Machine color per RAL PLC control with automatic press cycle, bale-ready indicator and E-stop with key Additional press chambers (up to 6 total) Strapping bands Power supply 380 - 400 V (3 phases) Double-chamber baler, baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste compactor, recycling press, refuse compactor, waste press, residual waste press

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, en_001 Blodpfxovahudj Abkjr

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-01 Bledpfeiwgcmsx Abksr