Beli Baler bekas (250)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Hodjvf E Avopfx Al Iol Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 32.169 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.320 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 22.000 kg, kapasitas tangki oli: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical data for the baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main ram force: 60 t Pre-pressing force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates: With bulk density of 30 kg/m³: approx. 5.5 t/h With bulk density of 50 kg/m³: approx. 10 t/h With bulk density of 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with wirbulator 1 maintenance platform with access ladder 2 wire stations with deflection pulleys for 10 wire spool racks (without wire) The following repair and overhaul works were performed: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil Hedpfxsviwdme Al Iel - Oil filter and air filter replaced - Hydraulic block partly resealed - Hydraulic hose on hydraulic block replaced - Wire feed wear tracks at bottom passages welded and smoothed - Tying mechanism cleaned and serviced - Electrical system refurbished, some door switch contacts replaced - Wirbulator repaired - General maintenance performed, lubricated - Machine tested in running mode, without material, in manual and automatic mode (see functional video) Remarks: The plant has already been fully dismantled, stored, and is available at short notice for loading. Documentation (operating manual, CE certificate, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical data or possible errors.

Kondisi: siap digunakan (bekas), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, big bags, polystyrene HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860, new, demo model, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000-1200 Bale weight (approx.): 500 kg Technical data: L x W x H (mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Hsdjra Rbgopfx Al Iol Pressed material: film, cardboard Idle cycle time: 25 s

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 01113, lebar total: 2.180 mm, panjang total: 12.200 mm, panjang bal: 500 mm, tinggi bal: 400 mm, gaya penekanan: 350 t, berat keseluruhan: 34.000 kg, Shear baler Ecotecnica model 2535, tahun 2013, dengan sekitar 5.000 jam kerja, dalam kondisi operasional baik dan dilengkapi dokumentasi lengkap. Hjdpfxoy Ibw Tj Al Iol Mesin cocok untuk pemampatan dan pemotongan scrap besi, termasuk profil, plat, dan scrap campuran. Data teknis Gaya potong: 350 ton Jam kerja: 5.000 Panjang chamber pemampatan: 5,0 m Lebar chamber dengan sayap terbuka: 1,70 m Ukuran bale: 500 x 400 mm Panjang total: 12,20 m Lebar: 2,18 m Berat: 34.000 kg Perlengkapan Mesin diesel Iveco 172 HP Remote control Dokumentasi lengkap Mesin berfungsi dan siap pakai. Tersedia untuk inspeksi dan uji coba.

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 2.568 h, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, berat keseluruhan: 4.900 kg, tekanan: 200 batang, sekring listrik: 27 A, Kami menawarkan mesin press bekas LUX VM-TEC K50V4 untuk kertas, foil, dan plastik, tahun produksi 2007. Mesin ini sudah termasuk konveyor. Hjdpfey H E R Isx Al Iel Model: K50V4 Tahun pembuatan: 2/2007 Nomor produksi: abba359 Nomor seri: Cont-000089 Daya: 18,5 kW Arus: 27 A Tegangan: 400 V Frekuensi: 50 Hz Tekanan maksimum: 200 bar Berat: 4900 kg Apabila Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, jangan ragu untuk mengirim pesan atau menghubungi kami melalui telepon.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Bale Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Hodpfx Aloy Avlns Isl Manufacturer: Dixi Model: Dixi 80 SLD Year: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Cycle time: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We assume no liability for the details provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Bale Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Cycle time: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We assume no liability for the details provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Hedpfx Aljy Avhcj Iol Sale is ex works, payment in advance, without warranty or guarantee.

Kondisi: bekas, jarak tempuh: 70.747 km, daya: 235 kW (319,51 hp), pendaftaran pertama: 07/2021, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 09/2026, tipe perpindahan gigi: semi-otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, lebar bukaan pengisian: 920 mm, panjang bukaan pengisian: 1.600 mm, Halo, saya menjual baler saluran Paal Comdec yang berfungsi penuh. Mesin telah diservis dan dalam kondisi teknis yang sangat baik. Mesin dilengkapi dengan konveyor sabuk. Pada tahun 2025, sabuk konveyor telah diganti. Hjdpfx Aeyk Uzpsl Isl

Kondisi: baik (bekas), Dijual mesin press bal merek Kienzle, model Robust 6. Mesin ini bekas namun dalam kondisi berfungsi dan berjalan dengan baik. Sangat cocok untuk usaha kecil, gudang, atau industri untuk memadatkan karton, plastik, dan material kemasan. Detail: • Produsen: Kienzle • Model: Robust 6 • Kondisi: bekas, berfungsi penuh • Penggunaan: karton, plastik, kemasan Press ini dibuat kokoh dan andal untuk penggunaan harian. Terdapat tanda-tanda pemakaian normal, namun secara teknis tanpa masalah. Inspeksi dan pengetesan di lokasi bisa dilakukan. Mesin siap pakai dan tersedia segera. Hjdjy Ez Rzspfx Al Ijl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Baler Paal Pacomat II, year of manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Feed opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Hedpoyz Saljfx Al Isl Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5,200 kg Materials: Paper, cardboard, film Remarks: The machine is in functional condition. It has been checked and tested at our facility in 28816 Stuhr. You can find the video on our website or YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. Please note: All technical data is based on manufacturer's information. We do not accept liability for the accuracy of the information provided or for any errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections by appointment only. Sale is ex location, without warranty or guarantee. Our payment condition is 100% payment in advance.

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 28.155 h, Fungsionalitas: berfungsi sepenuhnya, en-001 Hodjyz R Uuopfx Al Ijl

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 1.640 h, Fungsionalitas: berfungsi sepenuhnya, Baling Press Presto CC 40 M, Year of Manufacture 2017 Hodpjyz R Hqofx Al Iol Technical Data: Manufacturer: Presto Model: CC 40 M Year of Manufacture: 2017 Pressing Force: 40 t Cycle Time: 34 s Drive Power: 15 kW Filling Opening: 1080 x 1100 mm Filling Volume: 0.85 m³ Tying: 4-fold, polyester tape, manual Throughput at bulk densities of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale Dimensions: 750 x 1100 mm Bale Weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine Weight: approx. 3800 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Note: Discharge channel with fully automatic control. Please note: All technical data is based on manufacturer information. We accept no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 7.145 h, Fungsionalitas: berfungsi sepenuhnya, Channel baler Presto HPK 50 HS, year of manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1,600 x 650 mm (L x W) Channel Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Binding: 4-fold Throughput Rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Hsdeyz R Eyopfx Al Iol Machine Weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles Note: The knives, counter-knives, and all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Please note: All technical data are based on manufacturer's information. We do not accept any liability for the specifications provided or possible errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections by appointment only. Sale is ex-works, payment in advance, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2008, gaya penekanan: 30 t, Mesin press bal, Bramidan, 4-x 30 SLD, 30 ton gaya tekan – bekas - : Harga ex lokasi: hanya €3.950 (netto) Hodpfxjyzcvws Al Iel Produsen: Bramidan Tipe: 4-x 30 SLD Nomor: PEY297206-3 Tahun pembuatan: 2008 Tinggi: 2300 mm / Lebar: 1800 mm / Kedalaman: 1500 mm Berat: 1.850 kg 3x230/400V, 25/16 Amp, 4kW Kondisi: baik (Foto dengan pita peringatan hanya untuk menandai mesin tidak lagi digunakan karena telah dibeli mesin baru yang lebih besar) Tersedia: segera Lokasi: Husum Manual pengoperasian tersedia

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 7.500 mm, panjang bal: 120 mm, lebar bal: 750 mm, tinggi bal: 1.100 mm, berat bal: 550 kg, berat keseluruhan: 9.000 kg, Perlengkapan: dokumentasi / manual, Automatic Baler HSM VK 4812 The machine is in perfect condition. Total hours worked: only 1,950; total number of bales processed: only 1,314. The machine was regularly serviced and has operated indoors since new. It processed very low-abrasion material – textile trimmings. Key advantages of the machine: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle → works well with belt conveyor lines - Significantly better than the 15–22 kW versions for high material volumes Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressure: 58.2 N/cm² Volumetric output: up to 332 m³/h Practical weight output: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical maximum output: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Feed opening: approx. 1020 × 1250 mm We also have other balers available in stock. Transport costs depend on weight, volume, and most importantly distance. When inquiring, please provide the following information: delivery address (postal code and town/city). Further details require phone contact, so we ask you to inquire about transport costs and other delivery options by contacting us by phone. Our contact details can be found in the seller’s legal information. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Hjdpoy Dpy Ujfx Al Iol We issue intra-Community invoices – VAT exempt. Opening hours: Mon–Fri: 8:00–16:00 Sat: closed

Kondisi: sangat baik (bekas), I am selling a Lukas press in very good condition. Hsdjum Htzspfx Al Ijl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-wiring (9-fold tying system). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER -Total length: 9700 mm -Total width: 3700 mm -Transport width: 2300 mm -Height including hopper: 3640 mm -Total weight approx.: 24 t -Ground pressure approx. 5 kg/cm² -Heaviest component weighs approx. 6 tons HOPPER OPENING -Length: 1600 mm -Width: 1200 mm -Inspection door (glass) PRESS CHAMBER -Plunger stroke length 2600 mm -W x H: 1100 x 770 mm -Volume 2.2 cbm -The plunger runs on heavy-duty rollers and is equipped with knives for cutting off residual material. Hsdpfx Aey Ayiqol Iol -The pressure in the press chamber (channel), with two side cylinders and a simple lever system, allows for regular and uniform force distribution. HYDRAULIC EQUIPMENT -Siemens electric motor, 4-pole, 400V-50Hz, 30 kW -Hydraulic pump (Bucher) constant/peak: 320 / 400 bar -Max. operating pressure: 290 bar -Denison hydraulic valves, 24 VDC -Pressure control with proportional valve cycle -Automatic oil temperature monitoring -Automatic oil filter monitoring -Automatic oil level monitoring -Oil volume: 600 l -Max. pressing force: 740 kN / 74 t -Specific pressure: 87 N/cm² SYSTEM THROUGHPUT -Volume per press stroke including pre-compression: 1.76 cbm -Average pressing cycle duration approx. 40+8 sec -Press cycle duration without material: 22+8 sec -Tying time: 30 sec -Theoretical volume without tying: 1.84 m³/h -Average working volume: 123 m³/h -Capacity at material density of 30 kg/m³: 3–4 t/h BALES -Bale length: 500 – 2000 mm -Bale width: 1100 mm -Bale height: 770 mm

Kondisi: bekas, Belownica HSM 4012 otomatis Tekanan tekan: 45 ton Daya mesin: 15 kW Daya listrik: 400 V / 50 Hz Ukuran bale: sekitar 900 × 720 × 600–1200 mm Penampang bale P x L: 900 x 720 mm Kapasitas tangki: 300 l Bobot bale: hingga 400 kg tergantung material Pengikatan: 3 kali otomatis dengan kawat Lubang pengisian 820 × 1250 mm cocok untuk pengisian kontinu, misalnya dengan konveyor Hodpov Ak Dgjfx Al Isl Dimensi dan berat mesin sekitar 6180 × 3190 × 2540 mm berat: sekitar 7–8 ton Material yang dapat dipres karton kertas film plastik limbah kemasan ringan Belownica telah diservis oleh perusahaan HSM.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 290/02, Fungsionalitas: berfungsi sepenuhnya, de Hsdpfx Aleyghhhs Ijl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Hodeyz Af Espfx Al Ijl Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 48 h, MG 50 TVE VERTICAL HYDRAULIC BALER Hsdpfsyzr Nmsx Al Ijl Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h, designed for compacting and baling soft waste materials such as glass wool mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber. Both the material loading door and the bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and is equipped with a 10-meter extension to allow remote positioning away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and guided by four lateral sliding guides. Material loading is carried out from the front. The compaction cycle (down and up movement of the compactor) is automatic and activated by a button. - For transportation, the machine will be delivered in three parts: one 2000 mm high, one approximately 2300 mm (the cylinder, to be assembled onsite). - The bale tying system is preset type, performed with doors open and tied manually. Using the slots at the back of the chamber, the bale can be tied with standard pre-cut wire or strapping. - Bale extraction from the machine is performed using a forklift, with dedicated channels at the base allowing insertion of the forklift tines. - The bale discharge door is secured with a handwheel, ensuring safe opening even with elastic materials. A microswitch ensures the door is fully closed before pressing. The upper door is fitted with a hydraulic lever closure with onboard controls. - Can be positioned flush against a wall; requires only frontal space for loading and bale extraction. - The hydraulic system is fitted with a safety block valve to prevent press fall. - The machine must be anchored to the floor and is installed above a collection tray for washing liquids. Technical Specifications: • Brand / Model: MG 50 T.V.E. 1200x1100x3500H • Pushing force: 50 tons • Material pressing force: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Pressing chamber: 1200 x 1100 x 3500 mm • Loading opening: 1200 x 1800 mm (height) • Compactor stroke: 2700 mm, single extension • Operation: Automatic, push-button • Cycle time (automatic): 130 seconds • Manual ties: 5 • Bale ejection: Forklift extraction • Hydraulic power unit: Integrated into the press • Motor power: 10 HP / 7.5 kW • Supply voltage: 380 V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm (H) • Noise level: 78 dB • Press weight: approx. 5,000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen.

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 97020-0010, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, daya: 45 kW (61,18 hp), tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, Mesin press bal ini dijual oleh Bollegraaf Recycling Solutions. Ini adalah mesin press bal HBC80 (45kW) dengan tali silang sebagai salah satu fiturnya. Tahun pembuatan mesin press bal: 1997 Hjdpfxsxvh Dyo Al Isl Mesin press bal Bollegraaf HBC80 45 kW Dimensi bal: 1100*720 mm Motor utama 45 kW Corong perantara Saluran masuk sabuk Panel kontrol Schneider PLC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, tahun perombakan terakhir: 2026, Perlengkapan: dokumentasi / manual, HSM VK 4812 P Year of manufacture: 2017 Fully automatic baler. The machine has undergone servicing and maintenance by an authorized HSM Service Center based in Germany. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wire. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Overall dimensions (L x W x H): 6661 x 3994 x 2583 mm Machine weight: 10.2 t Material processed: Foil, mixed paper, cardboard, punching waste Bale tying: 4-fold wire tying We also have other balers in stock. Hedpfxeyyi Svj Al Ijl Transport costs depend on weight, volume, and particularly distance. For inquiries, the following information is necessary: delivery address (postal code and city). For further details, please contact us by phone as a telephone conversation is required; please inquire regarding transport costs and shipping options by calling us. Our contact details can be found in the seller’s legal notice. We sell and export worldwide and, thanks to our large storage capacity, can deliver even larger quantities flexibly and promptly. We issue intra-community invoices – without VAT. Opening hours: Mon-Fri: 8:00 am – 4:00 pm Sat: closed

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 15.547 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W99-031.010, gaya penekanan: 60 t, tekanan: 250 batang, daya: 30 kW (40,79 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Mesin press baling bekas ini dijual oleh Bollegraaf Recycling Solutions. Ini adalah baling press tipe HBC60 (30kW) dengan pengikatan vertikal. Mesin press baling ini dapat dilihat di bengkel revisi kami. Mesin baling ini hanya memiliki 15.547 jam kerja. Hjdpeyux Nxjfx Al Ijl Kondisi teknis sangat baik! (mesin hanya digunakan untuk mempress kertas) Press ini dilengkapi dengan opsi berikut: * corong tengah + distributor * saluran masuk sabuk * saluran keluar bal * rak gulungan kawat