Beli Berani Penyortiran Kayu Bulat bekas (14.571)

Kondisi: bekas, berat kosong: 4.390 kg, berat muatan maksimum: 13.610 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 11/2018, ukuran ban: 275/70 22,5, kondisi ban: 80 persen, warna: hitam, Tahun pembuatan: 2018, jam operasional: 171.224 h, jarak tempuh: 171.224 km, ukuran ban depan: 275/70 22,5, ukuran ban belakang: 275/70 22,5, kabin pengemudi: kabin harian, kelas emisi: tidak ada, Perlengkapan: ABS, pendaftaran truk,

Tahun pembuatan: 2005, Kondisi: bekas, Used machine Year of manufacture: 2005 Equipment and technical data: - Log House Milling Machine BL100A – Four-Head Unit - For producing chalet corner joints by milling four sides of the log in a single clamping operation using 2 × vertical and 2 × horizontal milling spindles - Working dimensions: 140 × 200 mm - Milling spindle diameter: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle with digital counter - Workpiece clamping device: 2 × pneumatic, vertical - Extraction: underfloor hopper Ø 160 mm - Equipment: fully equipped with electrical controls, PLC, and pneumatics - Machine stand: prepared for end groove unit, drilling unit, and crosscut saw - Machine enclosure: fully enclosed, swing-up safety hood (gas strut) with viewing window - Control cabinet: on pedestal with 3.0 m cable conduit - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 pieces - Operation: pneumatic from front - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Height adjustment: spindle with digital counter - Workpiece clamping device: 1 × additional pneumatic, vertical - Equipment: integrated with electrical controls and pneumatics, without cutter - Integrated horizontal drilling unit with drill guide and chip guard - Max. drill diameter: 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatic, infinitely variable, with rapid traverse for idle stroke - Height adjustment: spindle with digital counter - Workpiece clamping device: 1 × additional pneumatic, vertical - Equipment: integrated with electrical controls and pneumatics, incl. drill Ø 20 mm - Integrated under-table crosscut circular saw (automatic operation only) - Max. cutting dimension: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: extraction hopper Ø 120 mm - Equipment: integrated with electrical controls and pneumatics, incl. saw blade - Prepared for automatic operation Ijdpeyxyanefx Afistf - Sliding table: mechanics, pneumatics, and electrics for end groove milling unit - Interface: electrical interface for external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: Beginning of May 2026 Location: Netherlands

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 308.181 h, Fungsionalitas: berfungsi sepenuhnya, Mesin: WEMA PROBST RHM (Generasi Kedua) Tahun Pembuatan: sekitar 1999 Isdpfx Aeydmp Ssfietf Diameter Kayu: 30 ‒ 120 mm Motor Utama (Pemotongan): 15 kW / 380 V Motor Penyuap: 1,5 kW Daya Total: kira-kira 17 kW Kondisi: Kondisi kerja dan visual sangat baik Tambahan: Beberapa set pisau baru disertakan Lokasi: Bulgaria, Vrani kon 7940 Harga: Sesuai permintaan Demonstrasi dapat dilakukan di lokasi!

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: VF9S455JS02166085, konfigurasi gandar: 3 gandar, pendaftaran pertama: 05/2001, panjang total: 13.600 mm, suspensi: udara, kondisi ban: 70 persen, warna: lain, Tahun pembuatan: 2001, Perlengkapan: ABS,

Kondisi: sangat baik (bekas), Ayen Alomat AL 200, 2 unit. Kondisi sangat baik. Isdpjyzhcpjfx Afietf

Kondisi: baik (bekas), Putaran lambat dengan lantai dorong Itodpfx Afsykkwajief Tahun produksi: 2007 Lebar rotor: 630 mm Motor 15 kW Hanya sekitar 750 jam operasi

Kondisi: sangat baik (bekas), Bruks 602 CS Mesin Chipper Drum - Ukuran bukaan masuk: 540 x 300 mm - Diameter drum: 600 mm - Jumlah pisau: 2 - Ketebalan kayu maksimal: 180/100 mm - Daya motor utama: 26 kW - Daya motor kipas: 11 kW - Kapasitas: hingga 20 m³ serpihan/jam - Panjang serpihan standar: 20-35 mm - Berat bersih: 1400 kg - Produsen: BRUKS (Swedia) Kondisi: telah diuji, kondisi siap pakai Konveyor juga tersedia Iodpfxoxmbids Afistf

Kondisi: bekas, SPRINGER Penjungkir Batang Revolver Itjdpfxsyvhilj Afisf

Kondisi: baru, berat muatan maksimum: 16.400 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 3.500 mm, lebar total: 2.550 mm, tinggi total: 955 mm, Tahun pembuatan: 2026, Perlengkapan: ABS,

Kondisi: baik (bekas), Tahun pembuatan: 1993, Ditawarkan sebuah Zeno Drum Shredder bekas, tahun pembuatan 1993. Tipe 1400x1600 mm. 97L-4538. Motor 75 kW, 1500 rpm. Motor hidrolik: 4 kW. Termasuk girboks cadangan tambahan. Isdoyznahjpfx Afistf

Kondisi: bekas, Instalasi ekstraksi debu kayu yang berfungsi dengan baik. Itedpfsyzw Easx Afijf

Kondisi: bekas, jarak tempuh: 529.640 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 05/2014, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, Perlengkapan: ABS, derek, pemanas parkir, pendingin udara,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Working height: 900 mm Working width: 1,350 mm Belt change side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt blowing device, 5-step adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically moves to a 10 mm workpiece thickness and the blowing rotors are activated. After the feed belt has been completely cleaned, the machine returns to its original setting. AAT EXTRACTION SLIDE GATE CONTROL Control of extraction slide gates via the terminal (24 volts DC, without extraction slide gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1–3 PC Emergency power supply for belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – underside sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. Machine is pre-configured for up to two auxiliary units, such as cleaning brush, satin or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatic pressure roller adjustment, profiled steel roller, 240 mm diameter with grit compensation system Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatic pressure roller adjustment, rubber roller, 240 mm diameter Rubber hardness: 85° Shore with grit compensation system Drive motor: 30 kW Iodpeyw Ndmefx Afietf Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for mounting a pressure bar - Automatic locking of the sanding assemblies for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation - Protected storage on the machine for additional sanding tools Drive motor: 22 kW Abrasive belt speed: 2–18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BAR - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the front and rear workpiece edges - Various sanding inserts, 80 mm width, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, but additionally: FBM FINISH BRUSH Brush unit with finish brush Brush fill: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Kondisi: bekas, jarak tempuh: 966.895 km, daya: 441 kW (599,59 hp), pendaftaran pertama: 03/2014, jenis bahan bakar: diesel, berat keseluruhan: 27.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: hijau, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, Tahun pembuatan: 2014, Perlengkapan: ABS, derek, pemanas parkir, pendingin udara,

Tahun pembuatan: 1991, Kondisi: baik (bekas), Manufacturer: HAEUSLER Model: VRM-HY Year of manufacture: 1991 Specifications Metric US Standard Roll width 3000 mm Plate thickness at 3 x top roll diameter 120 mm Plate thickness at 5 x top roll diameter 150 mm Plate thickness during prebending 100 mm Top roll diameter 910 + 820 + 740 mm Itedpfekwcc Nox Afief Bottom roll diameter 940 mm Side roll diameter 780 mm Number of rolls 4 Bending speed 2 + 4 Bottom roll adjustment 200 mm/min Side roll adjustment 500 mm/min Number of driven rolls 2 Power 300 kW Dimensions (approx.) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Tahun pembuatan: 1980, Kondisi: baik (bekas), Manufacturer: HAEUSLER Model: VRM-HY Year of manufacture: 1980 Specifications Metric US Standard Roll width: 3,000 mm Plate thickness at 3 x top roll diameter: 130 mm Plate thickness at 5 x top roll diameter: 140 mm Plate thickness for pre-bending: 120 mm Top roll diameter: 950 mm Bottom roll diameter: 850 mm Side roll diameter: 180 mm Number of rolls: 4 Bending speed: 2 + 4 Bottom roll adjustment: 0 - 400 mm/min Iodokvm Szepfx Afistf Side roll adjustment: 0 - 400 mm/min Number of driven rolls: 2 Power: 132 + 37 kW Dimensions (approximated) Length: 12,000 mm Width: 5,440 mm Height: 5,650 mm Weight: 286,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or terms of contract. We recommend verifying all important details.

Tahun pembuatan: 1978, Kondisi: baik (bekas), Manufacturer: HAEUSLER Itodekvm S Nspfx Afiof Model: VRM-HY Year of manufacture: 1978 Specifications Metric US Standard Rolling width 3050 mm Plate thickness at 3 x upper roller diameter 60 mm Plate thickness at 5 x upper roller diameter 70 mm Plate thickness for pre-bending 50 mm Upper roller diameter 630 mm Lower roller diameter 600 mm Side roller diameter 500 mm Number of rollers 4 Bending speed 0 - 5 Adjustment lower roller 200 mm/min Adjustment side roller 200 mm/min Number of driven rollers 2 Power output 120 kW Dimensions (approximate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Kondisi: siap digunakan (bekas), CNC OMNI 1530 sepenuhnya operasional dengan meja potong berukuran 153 x 300 cm dan sistem ekstraksi debu terintegrasi. Konstruksi kelas industri dengan rangka yang sangat kokoh, dirancang untuk penggunaan profesional secara terus-menerus. Ideal untuk pembuatan konstruksi periklanan, papan nama, dan pemotongan CNC MDF serta kayu lapis. Itedpsyy S Sljfx Afisf Mesin dapat dilihat beroperasi penuh dengan perjanjian dan siap untuk langsung diintegrasikan ke dalam produksi.

Kondisi: sangat baik (bekas), Penghancur kulit kayu HBS 1260 Tipe: 1260-32-EU / n=324 Iedpfx Afjxmld Ssietf Model: 1260 Kapasitas: 75-100 m³/jam Kebutuhan daya: 110-132 kW Putaran: 1045 rpm Berat: 2400 kg Konveyor serpihan kayu, debu, dan kulit kayu dengan penghancur kulit kayu Konveyor serpihan kayu, debu, dan kulit kayu (beberapa berbeda) Produsen: Tähkä Tahun pembelian: 1996-2005

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, de Itsdpfx Asxgt U Ejfief

Kondisi: baik (bekas), Tahun pembuatan: 1999, Holtec cross conveyor with feed hopper. 7 chain strands. Width: 15.50 m. Conveyor length: 5.0 m. Itodpfx Ajrdd I Ujfijf Chain spacing: 3.75 - 4.0 - 2.4 - 1.8 - 1.5 - 1.35 m. Robust chains, dimensions: 125 x 60 x 8 mm. Driven by SEW geared brake motor.

Kondisi: baik (bekas), Robust clamping trolley for horizontal frame saws or band saws Isdstqd Naepfx Afiotf Length approx. 9.0 m. Track gauge 920 mm. 6 clamping units. With hydraulic feed. Also suitable for feeding drying chambers, etc.

Kondisi: baru, A device for storing and feeding logs onto a sawmill table. By providing systematic material feed to the saw, its efficiency is increased and an additional worker becomes unnecessary. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000–12000 mm (optionally longer) Log length: 1000-2500 mm Log diameter: 100-400 mm Feed speed: matched to intake feed rate LOG FEEDING UNIT Itedpfx Aswavrcefisf A device for storing and feeding logs onto the table of a frame saw machine. By providing targeted material feed to the frame saw, its efficiency is increased and the need for additional personnel is eliminated. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000-12000 mm Log length: 1000-2500 mm Log diameter: 100-400 mm Feed speed: matched to the infeed rate

Kondisi: baru, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2008-176, Cambio 500 adalah mesin pembabat kulit kayu untuk gelondongan kecil hingga diameter 495 mm (20 inci). Mesin ini beroperasi pada kecepatan umpan hingga 120 m/menit (393 ft/menit). Berkat keandalannya, kebutuhan perawatan yang minimal, dan biaya operasi yang sangat rendah, Cambio 500 menjadi pilihan utama perusahaan pengolahan kayu terkemuka di seluruh dunia. Sistem pengumpan segitiga dan alat debarking berujung karbida bertenaga udara tekan merupakan fitur utama yang memastikan hasil pembabatan kulit kayu yang unggul. Iedpfoyl Aqhsx Afijtf Dilengkapi dengan konveyor umpan. Mesin belum pernah dioperasikan dan disimpan dalam gudang.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 105 kg, tinggi total: 1.400 mm, panjang total: 1.850 mm, lebar total: 1.150 mm, de__1 Itsdjyhhvzopfx Afief