Beli Bubuk Lapisan Tanaman bekas (1.996)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, BUMEX SP. Z O.O. – Automatic Parts Washing System for Pre-Powder Coating Preparation Working Dimensions: 1500 x 3200 x 2200 mm Itedpfxshfv D Se Aa Neb Chemical tanks heated by oil, gas, or electricity, Fluid tanks with capacities from 1500 to 2000 liters, 3 processing stages, Operating temperature up to 60°C, Fully automatic control system, Prefilter for collecting contaminants, Constructed from acid-resistant sheet metal, grade AISI 1.4301. Our equipment stands out for its superior build quality, operational safety, and the ability to tailor cabin parameters to fit your existing premises. We provide expert advice on selecting paint booths, dust extraction units, exhaust systems, and industrial heat recovery solutions. CHOOSE BUMEX SP. Z O.O. Top-quality machines among those available on the market. Professional consulting and support. Warranty. Warranty and post-warranty service. Comprehensive technical documentation. All BUMEX SP. Z O.O. products are EC certified. We offer our own transportation – prices are individually determined for each offer. VAT invoices are provided. Short delivery times! Machines can be customized with various configurations and dimensions according to your requirements! Contact us for more information.

Kondisi: baru, Tahun pembuatan: 2025, Heated by heating oil, powder coating oven The oven is designed for the polymerization of powder coatings. It is equipped with the latest heat exchanger, made entirely from acid-resistant AISI 1.4301 stainless steel, ensuring a very high efficiency. Working dimensions (mm): 1500 (W) x 4000 (L) x 2000 (H) Technical Data: Cbauevig73 • Power supply: 400V 50Hz • Riello 90 kW burner • Operating temperature: 210 °C • Maximum temperature: 230 °C • High-quality thermal insulation: 150 mm Equipment: • Overhead transport system • Convection (uniform temperature throughout the oven, speeds up the heating process of parts) • Locks for safe opening and closing • Timer module • Temperature controller (maintains and regulates the internal temperature accurately) • The oven is equipped with tracks for easy transportation Pvxgim CHOOSE BUMEX SP. Z O.O. Very high-quality machines compared to other products on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are CE-certified. We offer in-house transport – pricing is set individually for each offer. Iedpfx Asiv H Hpsa Netb We issue invoices with VAT shown separately. Short delivery times! Option to order machines in various custom configurations and dimensions! Please contact us.

Kondisi: baru, Tahun pembuatan: 2025, Natural gas-powered powder coating oven. The oven is designed for the polymerization of powder coatings. It is equipped with a state-of-the-art heat exchanger, made entirely from AISI 1.4301 acid-resistant stainless steel, ensuring exceptionally high efficiency. Working dimensions (mm): 1500 (W) x 5000 (D) x 2000 (H) Technical Specifications: • Power supply: 400V 50Hz • Riello 90 kW burner • Operating temperature: 210 °C • Maximum temperature: 230 °C • Premium 150 mm thermal insulation Equipment: • Overhead conveyor, Iedpfoh Igq Rex Aa Nstb • Convection system (ensures uniform temperature throughout the oven, accelerating the heating process of parts), • Safety locks for secure opening and closing, • Time module, • Thermoregulator (controls and maintains the internal temperature at the set level), • For easy transport, the oven is equipped with rails. Pvxgim CHOOSE BUMEX SP. Z O.O. Premium quality machinery among those available on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are CE certified. We offer our own transport – prices are quoted individually for each offer. Invoices with VAT shown separately. Short delivery times! Machines can be ordered in various custom configurations and dimensions! Contact us.

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA: Isdpfxshd Nraj Aa Notb Working dimensions (mm): 1200 x 1500 x 1800 • Power consumption: 20 kW. EQUIPMENT: • Internal trolley, • External trolley, • Genuine convection baking (uniform temperature throughout the oven), • Locks for safe opening and closing. POWDER COATING BOOTH: Working dimensions (mm): 1400 x 1400, Fan power: 1.5 kW, Fan capacity: 6,500 m³/h, Very quiet operation, Automatic filter cleaning. COMPLETE MANUAL POWDER COATING KIT The Inocart VT manual powder application set is ideal for uniform application of powders such as polyester, * Consistent and even spraying for a uniform finish, * Well-balanced gun for comfortable handling, * TEC5 technology ensures high-quality coating results, * 3 factory presets for quick commissioning, * 99 client-specific settings, * Inobox height adjustment for ergonomic controller operation, * Powerful cascade ensuring optimal powder wrap around parts, * High transfer efficiency minimizing coating time, * Advanced HV control for perfect coverage of hard-to-reach areas, * Adjustable powder flow, * Infinitely variable electric vibrating table, * Self-locking hook for gun and pump maintenance during cleaning, * Footrest for convenient transportation of the Inocart unit, * Unmatched cascade service life, * Monitoring of wear parts for timely replacement. CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and support. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products by BUMEX SP. Z O.O. carry a WE certificate. We offer our own transport service – prices negotiated individually for each offer. We issue invoices with VAT indicated. Short delivery times! Possibility to supply machines in various, personalized configurations and dimensions.

Kondisi: baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, A complete, fully functional powder coating system, manufactured in 1990, is available for sale. Many system components have been modernized or completely replaced and renewed in recent years. The system was decommissioned in Q1 2025, but can be reactivated and put into operation at any time if required. All system components are on standby and can be commissioned and demonstrated on site. The system has one manual and two automatic booths (which can be operated simultaneously). All booths are capable of coating workpieces up to a maximum size of 7000x2300x800 mm. The entire conveyor technology is supplied by CSF. The control system for all components, including visualization, all control cabinets, frequency converters, and many other parts, were completely renewed within the last 5-7 years. Ijdpfx Aasw Ek Nto Netb There is no maintenance backlog. The plant has been regularly and thoroughly serviced by our in-house maintenance department as well as by the respective manufacturers. Detailed documentation can be provided upon request. Price on request!

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation Itodpfxsxna U Ue Aa Nob - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.

Kondisi: baru, Tahun pembuatan: 2025, de5d7e48-6baf-4cdc-9711-0ca261f5a1c9 Itodpfovv Rfkox Aa Neb

Kondisi: baru, Tahun pembuatan: 2025, SISTEM POWDER COATING UNTUK PELEK DAN VELG MOBIL Oven menampung 4 buah velg 22’ dalam 1 batch KOMPONEN PABRIK: * OVEN POLIMERISASI 1,5x1x1,3m, LISTRIK 18KW * KABIN POWDER COATING VFK-2 SATU SISI * KONVEYOR OVERHEAD DAN TROLI MUATAN * PERALATAN POWDER COATING MANUAL Pengiriman: 6-8 minggu EXW pabrik Istanbul Itedpfx Aajvv Rfde Njb Perakitan dan pelatihan sudah termasuk Kami menawarkan solusi teknis terbaik dan harga kompetitif * Kantor di Prancis dan Jerman, Hubungi kami untuk informasi dan penawaran lebih lengkap

Tahun pembuatan: 2023, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Xtrutech XTS 35 für Pulverbeschichtungen (180–350 kg/h) 1. ZWECK UND HAUPTFUNKTIONEN DER ANLAGE Die Extrusionslinie zur Produktion von Pulverlack ist Teil eines gesamten Produktionsprozesses und dient der Herstellung von Polymer-Pulverbeschichtungen. Die Extrusionslinie umfasst folgende Verfahrensschritte: Bildung einer homogenen Schmelze des erhitzten Pulverlacks durch Mischen, Formgebung der Schmelze, anschließende Abkühlung des Produkts und dessen Zerkleinerung in feine Fraktionen. 2. ANLAGENKOMPONENTEN Itedpswz Ntijfx Aa Nob - Doppelschneckenextruder Typ XTS 3. BESCHREIBUNG DER EXTRUDERKOMPONENTEN 3.1. Doppelschneckenextruder Typ XTS 35 Der Extruder für die Pulverbeschichtungsherstellung besteht aus: - 24D hydraulisch öffnenden Zylinderhälften oben und unten für schnellen Zugang zu Reinigung, Wartung und Notfallreparaturen der Zylindereinsätze und Schneckenwellen. - Rechteckige Einfüllöffnung zur Dosierung von schwer zu dosierenden Materialien. - Robuste, hochdurchsatzfähige, wassergekühlte Baugruppen mit 5 elektrisch beheizten (je 2 kW Aluminiumbronze-Heizplatten) Temperaturregelzonen für ausgezeichnete Temperaturkontrolle. Max. Betriebstemperatur: 350°C. - Zylinder auf der Austragsseite mit wassergekühltem Auslaufadapter und Schneidmesser ausgestattet. - Schnecken mit Schneckenelementen. Schneckendrehzahl 0–900 U/min. Wassergekühlter AC-Motor mit 26 kW Leistung. Das stufenlos regelbare (PIV-)Getriebe ist für 139 Nm ausgelegt und über einen automatischen Drehmomentbegrenzer geschützt. - Schnellspanner / Schnellkupplung der Wellenverbindung und Zahnwelle. Stromversorgung: 400±6%, 3 Phasen, 50 Hz (mit Schutzleiter). Steuerung: 24V. Wasserversorgung: 70 l/min bei 15°C und einem Kühlmitteldruck von 4 bar. Ca.-Maße: L=2250 mm, B=1000 mm, H=1600 mm Ca.-Gewicht: 1600 kg. Großraumgeometrie D/d = 1,8 AC-Motorleistung 26 kW Schneckendrehzahl 900 U/min Durchsatz durchschnittlich 180–220 kg/h, max. 350 kg/h

Tahun pembuatan: 2023, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 2x ICM19 Sistem standar dirancang untuk pengoperasian pada suhu lingkungan 5 °C - 30 °C Gambar GA sesuai pengaturan standar NEA No. P&ID Perlindungan EX PSR 11 + sistem proteksi ATEX Catu Daya 380 V ± 5% - 50 Hz Panel kontrol dirancang untuk pengoperasian pada kondisi lingkungan 5 °C - 30 °C. (ketinggian lokasi pemasangan < 500m dpl) Rentang Kapasitas Isdpfxow Snm Uo Aa Notb 137 - 410 kg/jam = 120 - 360 g/m³ pada intake sistem 19 m³/menit (operasi kolektor siklon) ditentukan sebagai laju umpan ke pabrik - bukan pembuangan Kapasitas Nominal 319 kg/jam untuk kehalusan 99% < 105 mikron pada intake udara sistem 19 m³/menit (operasi kolektor siklon) Detail untuk intake udara ke pabrik < 11°C, suhu flakes < 25°C, ukuran flakes < 25 mm, massa jenis curah 0,6 - 0,7 kg/dm³

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Kapasitas pendinginan • Kapasitas throughput: 800 kg/jam Itjdew Snbfspfx Aa Njb • Suhu masuk produk: 140°C • Suhu akhir produk

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, XTS56 - 24D Twin Screw Extruder • Motor dan penggerak AC 130kW berpendingin air. – Tingkat kebisingan rendah Isdpfsw Snlwex Aa Notb

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Model BBACooler CCC-95/60 adalah pendingin drum kompak untuk pendinginan dan pemadatan produk kental. Kapasitas pendinginan Itsdpfjw Sm Epsx Aa Nob • Output: 450 kg/jam • Suhu masuk produk: 140°C • Suhu akhir produk:

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Itodpfx Aaefz Dubo Njb Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function Iedpfxjfz Apqo Aa Njtb You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete Ijdefz A Ilspfx Aa Njtb ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Iedpfofzktzsx Aa Nstb The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Itsdpfsfz Dt Nex Aa Nob Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application Iedpsfz I D Dofx Aa Netb The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. Itedpfx Aofz I Edja Nsb By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Isdpfxefz I Ehe Aa Notb The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. Iedpfxoflmdws Aa Notb By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Ijdpfxsfzkrns Aa Nstb Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete Itodsfz A Iwspfx Aa Njb ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Touch to Delete ROMER cabins are equipped with 4-inch color touchscreen controls. Cab operation is intuitive and available in three modes: automatic (temporary), automatic (via a plug-in filter sensor), or manual. Filter Plug Sensor The cabins are fitted with a sensor that monitors filter clogging and indicates when they need to be cleaned. The system also notifies the user when filters have been used. Automatic Filter Cleaning The electronic automatic filter cleaning system manages the cleaning intervals and activation times. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on operators to clean the filters. Thanks to this system, the operator does not need to remember or stop for cleaning. Low Noise Level Aluminum fans operate very quietly, producing only 74-79 dB, which is not excessive. Even with the standard cabin design, it is difficult to carry on a conversation near the units. Exhaust through the cabin. The cabin’s overhead squirrel cage fans improve workflow by eliminating the need for manual push systems, preventing operators from being distracted. Explosion Protection The cabin is designed to prevent explosive mixtures from accumulating during the painting process. All components have been carefully selected to minimize this risk. Itodpfx Aofzciqoa Neb