Beli Casadei bekas (84)

Kondisi: bekas, Tahun pembuatan: 2002, nomor mesin/kendaraan: MR006281, Mesin router meja bekas dalam kondisi baik dan dilengkapi dengan alat pengumpan, siap langsung digunakan. Harga ex Staphorst. Spesifikasi teknis: - Poros frais miring: Tidak Gijdpfxjx Tt N Es Adtjl - Diameter poros: 40 mm - Nomor seri: KK000101

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.000 mm, tinggi total: 2.070 mm, panjang total: 1.800 mm, lebar penggilingan: 1.350 mm, daya: 11 kW (14,96 hp), panjang sabuk penggiling: 2.150 mm, lebar sabuk penghalus: 1.370 mm, diameter nosel ekstraksi: 200 mm, daya motor pengumpan: 800 W, tegangan masuk: 400 V, machine shows minor signs of use from demonstrations. The LIBRA 45 stands out due to its extensive standard features, highly robust construction (both the main frame and working units), sanding pads with a larger contact area, and modern control systems. Motorized table height adjustment Digital display of working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Giodpfx Ajvxu E Hsdtjl Automatic star-delta starting Natural rubber feed belt with negative profile Automatic belt centering Support table with rollers at infeed and outfeed of the feed belt Large sanding roller diameter: 140 mm Belt feed through gear motor with two speeds Flexible steel pressure beam before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tension per unit with decimal correction for grit/belt thickness Equipment: Work table height adjustment with electronic height display Sanding belt oscillation via electronic system Rubber-coated grooved pressure roller at 1st infeed position with reverse lock (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from the control panel Connection – Dust extraction: Extraction nozzle diameter 2 x 200 mm Electrical Data Motor for height adjustment: 0.25 kW Feed motor power: 0.8 kW Main drive motor: 11 kW Connection voltage: 400 V Network frequency: 50 Hz Sanding unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Min. height: 4 mm Max. height: 170 mm

Kondisi: baru, Tahun pembuatan: 2026, CASADEI Libra 35 - Wide Belt Sander, Twin-Belt Configuration Available immediately - Ex-stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 /170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33/0.55 kW Table elevation motor output: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/Depth: 1820 mm Height: 1960 mm Image shows optional equipment Wide belt sander in twin-belt design up to 1100 mm with a wide range of options—ideal for cost-conscious craft businesses Robust, tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity Operator-friendly, clearly arranged control panel on the front Electrically powered table height adjustment Digital display for working height Electronically controlled belt oscillation with reduced compressed air requirement Automatic star-delta main motor start Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt driven by geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Quality – made in Europe RTC Version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit: combination unit with finely adjustable working height for calibration and fine sanding, featuring a rubber-coated roller Ø 120 mm (45 Sh) and hard sanding pad with graphite insert on replaceable base Scope of delivery: Work table height adjustment with digital display Electronic sanding belt oscillation system Rubber-coated grooved pressure roller at infeed 1st position with anti-reversal lock (C.E.) Star-delta main motor start Grooved calibration steel roller Selector switch for sanding pad positioning from the control panel Gisdpfxecr S Ecs Adtjl Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: Ex-stock Bitburg – special price

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, SCORNICIATRICE OTOMATIS CASADEI MOD. MATRIX 5 (4+UNIVERSAL) - 4 kepala planer dengan pisau paduan Giedpfx Aox Rp Ixsdtel Komposisi: - Kepala horizontal bawah - Kepala vertikal kanan - Kepala vertikal kiri - Kepala horizontal atas - Kepala universal - Daya total: 31,9 kW - CE - Tahun 2005

Kondisi: bekas, Tahun pembuatan: 1994, Perangkat bor lubang pen dowel: jarak 16, 22, 25, 32 Kedalaman bor: 145 mm Panjang lubang slot: 240 mm Jalur penyesuaian tinggi: 135 mm Daya motor: 1,5 kW Kecepatan putar: 2800 rpm Penahan bawah: manual Panjang mesin: 1280 mm Lebar mesin: 960 mm Gsdpfox I Aiqsx Adtjil Berat: 300 kg

Kondisi: baru, 1. Robust cast iron and steel construction 2. Dynamically balanced milling unit anchored to the worktable 3. Exceptionally heavy-duty design Giedeu T Hhkspfx Adtol 4. Smooth operation thanks to precision-engineered components and high dead weight 5. Standard with reversing spindle rotation and electronic interlocking when changing direction 6. Five spindle speeds from 3,000 to 10,000 rpm 7. Speed changes are convenient and straightforward from the side of the machine 8. Standard with MK 4 quick-change spindle system 9. Large worktable made of cast iron ensures lasting precision 10. User-friendly controls and speed display mounted on the front of the machine 11. Large, professional-grade fence with fine adjustment and aluminum fence jaws as standard 12. Fence adjustment via handwheel 13. Numerical display of spindle height setting to a tenth of a millimeter 14. High-performance industrial motors Manufacturer SCM Group S.p.A. Via del Lavoro 1/3—P.O. Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction: - Number of extraction outlets: 2 - Extraction outlet diameter: 80 mm - Number of fence extraction outlets: 1 - Fence extraction outlet diameter: 120 mm Worktable: - Worktable length: 2,500 mm - Worktable width: 810 mm - Table height: 923 mm Installation Information: - Space requirement clarification: Dimensions include maximum travel or working lengths - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Note on working area: Please add the indicated dimensions to the space requirement to determine the recommended free setup area for the machine Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front by handwheel with digital numerical display - Curved milling safety guard - Manual spindle height adjustment - Manual spindle tilt adjustment - Manual control of spindle height and tilt - Control elements positioned on the machine body - Table configuration: Extension tables on left and right, pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Main drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45 ° - Usable spindle length: 140 / 180 mm - Note on usable spindle length: For spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (retractable): 320 x 60 mm - Max. tool diameter for profile milling: 250 mm - Max. tool diameter for tenoning: 350 mm - Max. tool diameter for contour milling: 160 mm

Kondisi: bekas, Tahun pembuatan: 2021, listing-001 Gedpswka Txsfx Adtsil

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.100 mm, lebar penggilingan: 1.100 mm, tinggi penggerindaan: 170 mm, daya: 15 kW (20,39 hp), jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 1.900 mm, lebar sabuk penghalus: 115 mm, CASADEI LIBRA 35/2 RTC 110 Stock configuration Dual-belt version with 1100 mm sanding width for the price-conscious workshop The LIBRA 35 calibration and fine sanding machine is an extremely versatile and multi-purpose machine. - Robust monoblock steel frame reinforced with tubes, with high-mounted working units for maximum rigidity - User-friendly, clear front control panel - Motorized table height adjustment - Digital display for working height - Electronically controlled sanding belt oscillation with reduced compressed air requirement First unit: Helically grooved steel roller, Ø 120 mm, fine adjustment for calibration, pneumatic on/off activation of the roller Second unit: Combination unit with fine-adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding shoe with graphite coating on interchangeable insert and pneumatic on/off activation of the roller Segmented sanding pad: Flexible, segment pitch 56 mm Electronic control: FOX 500 KTR Giedpfx Ajwa Dbxodtel Workpiece thickness adjustment: Electronic Automatic conveyor belt centering: ✔ Automatic star-delta main motor start-up Natural rubber feed belt with negative profile Feed table with two rollers at the infeed and outfeed of the conveyor belt Belt feed via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/belt thickness Dimensions: Length approx. 1650 mm Width/depth approx. 1820 mm Height approx. 1960 mm Extraction connection Number of extraction ports: 2 Extraction port diameter: 140 mm Electrical data Table height adjustment motor power: 0.25 kW Feed motor power: 0.33/0.55 kW Drive motor power: 15 kW Supply voltage: 400 V Frequency: 50 Hz Sanding unit Sanding belt length: 1900 mm Sanding belt width: 1115 mm Max. sanding width: 1100 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Min. height: 4 mm Max. height: 170 mm #### For many years, we have operated a partnership-based sales model with specialist dealers. Therefore, order processing is handled via a recommended partner, coordinated with you. ####

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Giedpogf Sw Njfx Adtel Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Data Umum Tinggi pengukuran 1445 mm Dimensi Panjang Mesin 2740 mm CASADEI Bordatrice E350PM ini diproduksi pada tahun 2022. Mesin ini memiliki rentang tinggi panel 10-45 mm dan mendukung ketebalan pita tepi dari 0,4 hingga 2 mm. Mesin beroperasi dengan kecepatan sabuk umpan 7 m/menit, dengan daya pemanas tangki lem sebesar 1490 W. Pertimbangkan kesempatan untuk membeli mesin edge bander CASADEI Bordatrice E350PM ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Giodpfx Aox D Icfedtjl Edge Banding

Kondisi: bekas, Tahun pembuatan: 1982, Lebar kerja: 510 mm Tinggi penyerutan: 240 mm Poros penyerut: pisau strip Jumlah pisau: 4 Pengaturan tinggi: roda tangan Tampilan ketebalan penyerutan: penghitung Kecepatan maju: 7 / 14 m/menit Roller pengumpan: baja Roller pengeluaran: 2 x baja Gsdox Edllepfx Adtsil Roller meja: ya Daya motor: 4 kW Koneksi ekstraksi: Panjang mesin: 1000 mm Lebar mesin: 1000 mm Berat: 800 kg

Kondisi: baru, - Motorized thickness table adjustment with two speeds Giodpfxju T Hq Ee Adtel - Digital display for working height - Thickness table made of cast iron - The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision - Four feed speeds - Optionally available with two rollers in the thickness table - Standard equipped with noise and chip protection curtain at both infeed and outfeed sides - Adjustable roller pressure - Infeed roller with helical toothing - Outfeed roller with rubber coating - High-performance industrial motor Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction port diameter thickness: 150 mm Installation Information: - Space requirement length: 1305 mm - Space requirement width/depth: 1080 mm - Space requirement height: 1197 mm - Space requirement explanation: The dimensions take into account maximum travel paths or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Explanation of working area: Please add the specified dimensions to the space requirement to determine the recommended free installation area for the machine. Thicknessing: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Working height min.: 3.5 mm - Working height max.: 300 mm - Working length min.: 210 mm - Max. cutting depth: 8 mm Electrical Data: - Main motor power: 9 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 pcs - Cutterhead speed: 4500 rpm - Max. planing width: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Kondisi: bekas, Tahun pembuatan: 2020, Lebar kerja 1100mm Lebar sabuk 1115 mm Pengembangan sabuk 1900mm Tinggi kerja min-maks 4/170mm Rol masuk baja - rol karet - rol keluar baja Giodpex A D Arofx Adtsl Sepatu finishing Probe panel Daya motor utama 11kw-15hp Daya motor penggerak 0,4kw-0,7hp Dua kecepatan penggerak 4.5/9m/menit Tegangan 380 V

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, jam operasional: 5 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 3.200 mm, lebar pemotongan (maks.): 1.270 mm, lebar potong di pagar rip: 1.270 mm, ketinggian potong (maks.): 200 mm, diameter mata gergaji: 550 mm, jenis penyesuaian ketinggian: listrik, berat keseluruhan: 1.000 kg, kecepatan rotasi (min.): 2.500 rpm, kecepatan rotasi (maks.): 5.000 rpm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, daya: 9 kW (12,24 hp), Perlengkapan: doser, Robust steel and grey cast iron construction Standard with three cutting speeds Gedpfx Aewz Nzyodtsil Equipped as standard with NC control including 7-inch LCD display for setting all machine axes Saw unit with permanently precise double tilt segment guide; Holzkraft offers a 6-year guarantee on wear of the tilting segments Cutting height and blade tilting are positioned electrically Scoring unit with separate scoring motor Powerful industrial motors Smooth-running and precise sliding table made of anodized aluminium, proven and permanently smooth ball contact system on hardened guides; 10-year warranty on wear of the guideways Large support surfaces thanks to standard table extension and table widening Grey cast iron saw table Flip-down parallel fence with fine adjustment and round guide bar Crosscut fence, extendable up to 3200 mm, with two flip stops and eccentric clamp Extra-large outrigger with material roller, extendable up to 2400 mm Sideways swiveling saw blade guard with integrated extraction port Optional: extendable mitre fences up to 1500 mm for direct mounting on the sliding table Numerous equipment options for individual customization

Kondisi: bekas, Tahun pembuatan: 2006, fr-casadei-f222l-de Giedpjwnhybofx Adtjl

Kondisi: baru, Tahun pembuatan: 2023, nomor mesin/kendaraan: MR005075, Xenia 40 adalah mesin gergaji format terlaris dari lini Xenia. Ini adalah versi M, dengan pengaturan tinggi-rendah dan kemiringan secara elektrik, serta pembacaan digital untuk ketinggian dan kemiringan mata gergaji. Harga sudah siap pakai, termasuk kabel, steker, dan mata gergaji, dari Staphorst. Spesifikasi teknis: Nomor seri: AB00031368 Gedpfjxlyyfox Adtjil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical capabilities specified in the manual, on workpieces made of plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical work table allows for easy loading and unloading of workpieces, while minimizing the machine footprint to the necessary minimum. Tool changes are accomplished using a 10-position tool magazine mounted on the side of the unit, which enables a variety of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Gisdpemzbr Ssfx Adtsl X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp: ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Kondisi: baru, - Robust steel and cast iron construction - Large, ribbed surfacing tables made of cast iron - Smooth operation due to high intrinsic weight - Four feed speeds - Motorized thickness table adjustment with two speeds and digital display - Segmented pressure bar at infeed - Precision-mounted four-knife cutterhead - Helical-toothed steel infeed roller for exceptionally consistent and gentle wood feed - Outfeed roller with rubber coating - Large surfacing fence, tiltable from 90° to +45° - Auxiliary fence included as standard - High-performance industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the surfacing table - Suction extraction connection is always in the same position, whether planing or thicknessing—eliminates the need for additional extraction hoses or cumbersome repositioning around the machine Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: Gedsu T Hq Sspfx Adtjil - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Surfacing: - Total length of tables: 2300 mm - Infeed table length: 1200 mm - Surfacing table width: 520 mm - Working height: 930 mm - Max. planing depth (surfacing): 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilting range: 90 – 45 ° Extraction connection: - Suction port diameter for thickness planing: 120 mm Installation Information: - Required length: 2300 mm - Required width/depth: 1610 mm - Explanation required space: Dimensions take into account max. travel/usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Working area details: Please add these measurements to the required space for the recommended free installation area for the machine. Thicknessing: - Thickness table width: 520 mm - Min. working height (thickness): 3.5 mm - Max. working height (thickness): 250 mm - Max. planing depth (thickness): 8 mm Electrical Data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 RPM - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Daya total 14 kW Agregat kalibrasi pertama dengan poros baja Agregat kombinasi kedua dengan poros karet Lebar kerja 950 mm Giedsx Hdtnspfx Adtol Dua kecepatan pengumpanan sabuk Pengaturan ketinggian meja secara elektrik Sepatu dengan pengaturan waktu kerja Osilasi dengan fotocell Tanda CE Tahun produksi 2007

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17456, panjang pemotongan (maks.): 3.200 mm, lebar pemotongan (maks.): 1.270 mm, ketinggian potong (maks.): 200 mm, diameter mata gergaji: 550 mm, berat keseluruhan: 1.000 kg, rentang pivot: 45 °, daya: 7 kW (9,52 hp), Perlengkapan: doser, rem mesin, New machine, year of manufacture 2021, serial number: - Robust steel and cast iron construction - Equipped as standard with three speeds Gijdpfxovxvbps Adtel - Standard with NC control unit featuring a 7-inch LCD display for setting all machine axes - Saw unit with permanently precise dual swivel-segment guide, 6-year Holzkraft warranty on swivel-segment wear - Electric positioning of cutting height and saw blade tilt - Scoring unit with separate scoring motor - Powerful industrial motors - Smooth-running and precise sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened rails, 10-year warranty on rail wear - Large support surfaces through standard table extension and widening - Cast iron saw table - Folding parallel fence with fine adjustment and round bar guide - Crosscut fence, extendable up to 3200 mm, with two flip stops and eccentric clamp - Extra-large outrigger with material roller, extendable up to 2400 mm - Sideways swiveling saw blade guard with integrated extraction nozzle - Optional: extendable miter fences up to 1500 mm for direct mounting on the sliding table - Numerous equipment options for individual customization

Kondisi: sangat baik (bekas), Mesin serut empat sisi Casadei C4 Lebar kerja: 220 mm Tinggi kerja: 120 mm Jumlah spindle: 4 Gjdpfexxiw Tox Adtsil Tata letak spindle: 1. Bawah 2. Kanan 3. Kiri 4. Atas Kecepatan putar spindle: 6000 rpm Diameter spindle: 40 mm Dua kecepatan makan: 6-12 m/menit Ukuran alat: 125-140 mm Makan didorong dengan poros kardanas Dokumentasi teknis

Kondisi: baru, Tahun pembuatan: 2025, Electrically adjustable thicknessing table with two speeds Numerical display for working height Thicknessing table made of cast iron The thicknessing table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical gearing Outfeed roller with rubber coating Gijdpoff Efaefx Adtel Powerful industrial motor Equipment details TERSA models with Tersa planer cutterblock Knife change in seconds When starting the machine, centrifugal force automatically tensions the planer knives – self-locking The knife projection is set automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains perfectly stable without locking Helical-toothed steel feed rollers ensure constant and uniform wood infeed Second, rubber-coated outfeed roller Robust anti-kickback devices prevent workpiece kickback A 4-knife cutterblock guarantees optimal planing results Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Extraction port diameter thicknesser 150 mm Drive power Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation The dimensions take into account maximum travel or working lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area Add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknesser table Thicknessing table length 630 mm Thicknessing table width 1000 mm Working height min. 3.5 mm Working height max. 300 mm Working length min. 210 mm Max. cutting depth 8 mm Electrical data Connection voltage 400 V Phase(s) 3 ph Current type AC Network frequency 50 Hz Planer cutterblock Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 4500 rpm Max. planing width 630 mm Feed Speeds 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Key Features: - Large planing tables made from cast iron - Table adjustment via a precise parallelogram system ensures that the distance from the table tops to the cutterblock remains constant in all positions - The large, stable fence made of anodized aluminum is easy to move and tiltable from 0° to 45° - Fence tilt is easily readable from the operator position Gjdpfx Adeu T Hrcjtsil - Supplied with auxiliary fence as standard - Large, four-knife cutterblock with precision bearings - Smooth operation owing to precision unit and heavy cast construction - Powerful industrial motor - Maximum operator safety with easy operation - Chip removal indicator via scale - Manual table adjustment - Motor protection switch Equipment Details - Includes fold-down auxiliary fence for narrow workpieces - Manual quick adjustment of chip removal with scale and knurled dial Safety Guard - The guard is foldable and designed so that the operator is not impeded yet remains protected during use TERSAModels with Tersa Cutterblock System - No adjustment or screwing needed - Cutter change in seconds - Self-locking - Especially quiet operation - Perfect planing results Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-P.O. Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 2750 mm - Width/Depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Planer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. planing depth: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence swiveling range: 90 – 45° Extraction Connection: - Extraction port diameter (thicknesser): 120 mm Installation Information: - Required space length: 2750 mm - Required space width/depth: 1604 mm - Explanation of required space: Dimensions account for maximum travel paths or usable lengths. Electrical Data: - Motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, jam operasional: 5 h, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 45 mm, ketebalan tepi (maks.): 3 mm, daya unit penggilingan: 750 W, jenis arus masuk: tiga fasa, kapasitas tangki: 1 l, Automatic edge banding machine with chain feed and jointing cutter unit Demo machine, year of manufacture 2022 Equipment: Touch ME "7" screen control Quick-change glue pot kit Multifunction end trimming unit Radius scraper unit Surface scraper unit LED interior lighting Gedpfx Aowa Ag Tedteil

Kondisi: baru, Tahun pembuatan: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise and chip protection curtains at the workpiece infeed and outfeed Adjustable roller pressure Gijdpfsd Hx E Iex Adtel Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa planer cutterhead Planer knife change in seconds When the machine starts, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection adjusts automatically without the need for setting gauges Work Table The work table is mounted on four large trapezoidal-thread spindles that guarantee maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains precise even without mechanical locking Helically-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Massive anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust Extraction Connection Extraction port diameter (thicknessing) 150 mm Drive Power Main motor 7.5 kW Installation Information Required space – Length 1170 mm Required space – Width/Depth 1003 mm Required space – Height 1197 mm Note on required space: The dimensions take maximum travel paths or usable lengths into account. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Note on working area: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Thicknessing Table Length 520 mm Width 1000 mm Minimum working height 3.5 mm Maximum working height 250 mm Minimum working length 210 mm Maximum chip removal 8 mm Electrical Data Connection voltage 400 V Planer Cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 4500 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min