Beli Casadei Xenia 40 bekas (68)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at cross-cut fence: 3200 mm Cutting depth: 200 mm Scoring unit: yes Saw blade height adjustment: motorized Saw blade tilt adjustment: motorized Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: digital Rip fence display: scale Gedpfxokuzd Hs Ai Aebp Cross-cut fence display: scale Saw blade diameter: 550 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7.5 kW Motor brake: yes / automatic Extraction port: 100 mm and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1000 kg

Kondisi: baru, Tahun pembuatan: 2026, CASADEI Libra 35 - Wide Belt Sander, Twin-Belt Configuration Gbjdpfx Ascr S Ecoi Ajp Available immediately - Ex-stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 /170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33/0.55 kW Table elevation motor output: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/Depth: 1820 mm Height: 1960 mm Image shows optional equipment Wide belt sander in twin-belt design up to 1100 mm with a wide range of options—ideal for cost-conscious craft businesses Robust, tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity Operator-friendly, clearly arranged control panel on the front Electrically powered table height adjustment Digital display for working height Electronically controlled belt oscillation with reduced compressed air requirement Automatic star-delta main motor start Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt driven by geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Quality – made in Europe RTC Version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit: combination unit with finely adjustable working height for calibration and fine sanding, featuring a rubber-coated roller Ø 120 mm (45 Sh) and hard sanding pad with graphite insert on replaceable base Scope of delivery: Work table height adjustment with digital display Electronic sanding belt oscillation system Rubber-coated grooved pressure roller at infeed 1st position with anti-reversal lock (C.E.) Star-delta main motor start Grooved calibration steel roller Selector switch for sanding pad positioning from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: Ex-stock Bitburg – special price

Kondisi: baru, Tahun pembuatan: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise and chip protection curtains at the workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa planer cutterhead Planer knife change in seconds When the machine starts, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection adjusts automatically without the need for setting gauges Work Table The work table is mounted on four large trapezoidal-thread spindles that guarantee maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains precise even without mechanical locking Helically-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Massive anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust Extraction Connection Extraction port diameter (thicknessing) 150 mm Drive Power Main motor 7.5 kW Installation Information Required space – Length 1170 mm Required space – Width/Depth 1003 mm Required space – Height 1197 mm Note on required space: The dimensions take maximum travel paths or usable lengths into account. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Gbjdpfx Aed Hx E Iji Ajp Width 2000 mm Note on working area: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Thicknessing Table Length 520 mm Width 1000 mm Minimum working height 3.5 mm Maximum working height 250 mm Minimum working length 210 mm Maximum chip removal 8 mm Electrical Data Connection voltage 400 V Planer Cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 4500 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Kondisi: baru, Tahun pembuatan: 2025, Electrically adjustable thicknessing table with two speeds Numerical display for working height Thicknessing table made of cast iron Gsdpfx Ajff Efaji Asbp The thicknessing table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical gearing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planer cutterblock Knife change in seconds When starting the machine, centrifugal force automatically tensions the planer knives – self-locking The knife projection is set automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains perfectly stable without locking Helical-toothed steel feed rollers ensure constant and uniform wood infeed Second, rubber-coated outfeed roller Robust anti-kickback devices prevent workpiece kickback A 4-knife cutterblock guarantees optimal planing results Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Extraction port diameter thicknesser 150 mm Drive power Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation The dimensions take into account maximum travel or working lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area Add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknesser table Thicknessing table length 630 mm Thicknessing table width 1000 mm Working height min. 3.5 mm Working height max. 300 mm Working length min. 210 mm Max. cutting depth 8 mm Electrical data Connection voltage 400 V Phase(s) 3 ph Current type AC Network frequency 50 Hz Planer cutterblock Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 4500 rpm Max. planing width 630 mm Feed Speeds 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Gjdpfedqzcxsx Ai Ajbp

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 'Z' Version for RTC 135 5257452 Vacuum Table with Electric Fan 3kW 5257453 Oscillating Belt Air Blowing Device for 5257454 Oscillating Belt Air Blowing Device for 5257462 Reinforced Motor 15 kW (20 HP) 5257485 Roller Table at Infeed and Outfeed for 5257499 Grooved Rubber Pressure Rollers, 2nd Position 5257500 Grooved Rubber Pressure Rollers, 3rd Position 5257504 Infinitely Variable Conveyor Feed with Inverter 5257605 Inspection Door with Window 5257606 LED Lamp for Internal Illumination TECHNICAL DATA Dimensions and Weights Product Length approx. 1800 mm Product Width/Depth approx. 2000 mm Product Height approx. 2070 mm Extraction Connection Number of Extraction Ports: 2 Extraction Port Diameter: 200 mm Electrical Data Feed Motor Power: 0.8 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Height Adjustment Motor Power: 0.25 kW Output Power (Motor Power): 11 kW Sanding Unit Sanding Belt Length: 2150 mm Sanding Belt Width: 1370 mm Max. Sanding Width: 1350 mm Feed Unit Feed Speed: 4.5 / 9 m/min Gedey Ehiwepfx Ai Aebp Workpiece Min. Workpiece Height: 4 mm Max. Workpiece Height: 170 mm Product Information EU 2023/2854 Type of Generated Data: Usage Data Format of Generated Data: Common machine-readable formats such as JSON Data Volume: Up to 5 MB Continuous Real-time Data Generation: Yes Data Storage Location: On the device and on a remote server Data Access: On device and via physical as well as wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Motorized thicknessing table adjustment with two speeds Digital display for working height Thicknessing table made of cast iron The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtains at workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSAModels with Tersa cutterhead Cutter change in seconds When the machine is started, the centrifugal force automatically tensions the planer knives—self-locking Blade projection is set automatically without the use of setting gauges Working Table The working table is mounted on four large trapezoidal thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting mechanism, the table position is reliably maintained even without locking Helically grooved steel infeed rollers for continuous and uniform feeding Second, rubber-coated feed roller at the outfeed Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimum planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter (planer) 150 mm Drive Performance Main motor 9 kW Setup Information Required space – length: 1305 mm Required space – width/depth: 1080 mm Required space – height: 1197 mm Explanation of required space: The dimensions account for maximum traverse paths or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Explanation of working area: Add the indicated dimensions to the required space to determine the recommended free installation area for the machine. Thicknessing Thicknessing table length: 630 mm Thicknessing table width: 1000 mm Working height min.: 3.5 mm Working height max.: 300 mm Working length min.: 210 mm Max. cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: In stock, 54634 Bitburg Gbodpfx Aijy Eg Apo Ajp - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PF 520 M Tersa – Planer for professional use, featuring 520 mm planing width and motorized adjustment of the infeed table - Oversized infeed and outfeed tables made of hardened and stress-relieved cast iron - Robust steel and cast iron construction ensures precision and longevity - Stable planer fence is easily adjustable and offers a generous support surface - Large planer fence, tiltable from 90° to 45° - Fence tilt can be conveniently read from the operator’s position - Supplied as standard with auxiliary fence - Large four-knife cutterblock with precision bearings - Smooth operation due to precision unit and heavy cast construction - Powerful 7.0 kW (S6) motor - Maximum operator safety with simple operation Scope of supply: - PF 520 M Tersa - Swiveling auxiliary fence - TX-Matic cutterblock guard - Reinforced main motor 7.0 kW Technical Data Gbsdpfxjb D Sbls Ai Aep Overall length of infeed and outfeed tables: 2960 mm Planing width: 520 mm Planer fence dimensions: 1100 x 160 mm Planer fence tilt range: 90 to 45° Max. depth of cut: 8 mm Cutterblock diameter / number of knives: 120 mm / 4 pcs. Spindle speed: 5000 rpm Motor power 400 V / 50 Hz / P2 / S1: 7.0 kW (9.0 HP) Extraction port diameter: 120 mm Weight: Location: Ex stock Bitburg Available immediately

Kondisi: baru, Tahun pembuatan: 2025, Large jointer tables made of cast iron The jointer table adjustment is facilitated by a precise parallelogram system, ensuring the distance between table edges and the cutterhead remains constant in any position. The large, sturdy tilting fence is made of anodized aluminum, easily adjustable and tiltable from 0° to 45°. The fence tilt is easily readable from the operator's position. Standard equipment includes auxiliary fence. Large four-knife cutterhead, precision-bearing mounted. Smooth operation due to the precision machining unit and heavy-duty cast construction. Powerful industrial motor. Maximum user safety with the simplest operation. Chip removal display via scale. Manual table adjustment. Motor protection switch. Equipment details Including foldable auxiliary fence for narrow workpieces. Manual quick-setting chip removal with scale & clamping handle. Guarding device The guarding device is foldable and designed to protect the operator without hindering work. Models TERSA with Tersa planer cutterhead system No more adjusting or screwing. Planer knife changes within seconds. Self-locking. Extremely quiet operation. Perfect planing results. Dimensions and weights Length approx.: 2750 mm Width/depth approx.: 1500 mm Weight approx.: 680 kg Jointer Total table length: 2720 mm Infeed table length: 1498 mm Max. depth of cut: 8 mm Fence length: 1200 mm Fence height: 190 mm Fence tilt range: 90–45° Gbedpfx Aieff Efcj Aep Dust extraction connection Extraction port diameter: 120 mm Drive power Main motor: 7 kW Setup information Required length: 2750 mm Required width/depth: 1604 mm Note: Measurements consider the maximum operating range or usable length. Electrical data Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Planer cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 5000 rpm Max. planing width: 520 mm Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, TIL16001 Gjdjy Ehcdjpfx Ai Asbp

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PFS 520 - Surface and thickness planer with 520 mm planing width and motorized thickness table adjustment Robust steel and grey cast iron construction Large, ribbed jointer tables made of grey cast iron, stress-relieved to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutter block with precision bearings Helically geared steel infeed roller for especially even and gentle wood feed Outfeed roller with rubber coating Large planing fence, tiltable 90°–45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutter block: Cutter knives can be changed within seconds When the machine starts, the centrifugal force automatically tensions the knives – self-locking The knife projection adjusts itself automatically without any manual setting or screwing The jointer table is adjusted via a robust and precisely guided parallelogram system, ensuring the distance between the table lips and cutter block remains constant in every position The sturdy aluminum planing fence is anodized as standard, easy to move, and provides a large support area The adjustable tilt from 90° to 45° is easily visible from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port position remains the same for both surfacing and thickness planing modes Thus, no further extraction hose or cumbersome replugging and routing around the machine is necessary. Technical Data Total length of jointer tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Planing fence dimensions: 1200 x 190 mm Planing fence tilt range: 90–45° Min./max. planing height: 3/250 mm Cutter block diameter/number of knives: 100 mm / 4 pcs Feed speed: 5/8/12/18 m/min Gsdpfx Asbxz S Hei Aobp Cutter block speed: 5000 rpm Motor rating: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Gbodpfx Aegf Sw Noi Asp Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: baik (bekas), Mesin pelapis tepi otomatis untuk panel lurus, dengan tangki lem untuk kayu, veneer, PVC, melamin, ABS, dan material lain - Standar CE Data teknis: - Konveyor sabuk otomatis untuk pemasukan panel - Kecepatan 7 m/menit - Tinggi panel: 10–45 mm - Ketebalan pelapis hingga 3 mm - Unit pelapis lem: Kapasitas tangki lem 1,2 kg - Kontrol suhu elektronik - Unit pemotongan ujung pneumatik depan & belakang dengan pisau bundar Vidia - Penyesuaian kedalaman potong mikrometrik - Kecepatan potong ujung 9000 rpm - Diameter pisau potong ujung 80 mm - Unit penyerut tepi atas & bawah - Mata frais Vidia diameter 80 mm - Dapat dikombinasikan dengan mata frais radius/fas - Kecepatan penyerutan 9000 rpm - Daya total 2,2 kW - 3 port hisap diameter 60 mm - Konveyor rol penyangga panel - Dimensi keseluruhan 2150 x 800 x 1200 mm (T) Gedpfx Aiozidxyo Aobp - Berat 405 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Mesin bor otomatis Jet Smart adalah solusi ideal bagi pengrajin serta usaha kecil dan menengah. Fleksibilitas, kecepatan, dan kemudahan penggunaan adalah fitur utama dari mesin ini yang memastikan produktivitas tinggi dan hasil pengeboran sempurna di segala kondisi kerja. Pengeboran cepat dan presisi! Pengeboran dari atas: pilihan tanpa kompromi! Sambungan tersusun sempurna tanpa kesalahan berkat pembacaan otomatis dimensi benda kerja, yang memungkinkan koreksi perbedaan antara panjang panel nyata dan pengaturan. Gbedpsy Rl Arofx Ai Aop ///Rincian teknis Dimensi maksimum benda kerja - 3050x900x60 mm Dimensi minimum benda kerja - 200x70x10 mm Kecepatan maks. sumbu X-Y - 40-40 m/menit Kepala bor: spindle vertikal / horizontal, pisau X - 12 / 6, 125 mm Elektrospindel (S6) - 5,5 kW (7,5 HP) - 18.000

Kondisi: bekas, Tahun pembuatan: 2003, de2specs001 Gbsdpfoxgn N Rsx Ai Ajp

Kondisi: baru, Tahun pembuatan: 2026, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2300 mm Jointer fence angle adjustable: yes Tilting of jointer tables: pneumatic Maximum planing thickness: 250 mm Thickness table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Gjdpfx Aioiuldys Aobp Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Kondisi: baru, Tahun pembuatan: 2022, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Surface table length: 3000 mm Surface table adjustment: motorized Chip removal display: digital Adjustable fence angle: yes Motor power: 7 kW Godpjiqg Nwsfx Ai Aobp Extraction connection: 120 mm Machine length: 3005 mm Machine width: 1460 mm Weight: 870 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Fence adjustment: manual Height display: mechanical counter display Swivel angle display: mechanical counter display Fence position display: mechanical counter Spindle diameter: 30 mm Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Power input: 7 kW Motor brake: Yes, automatic Gbsdpogyzzmofx Ai Aop Extraction connection: 1 x 120 mm, 2 x 80 mm Machine length: 2,500 mm Machine width: 1,250 mm Weight: 510 kg

Tahun pembuatan: 2017, Kondisi: seperti baru (mesin pameran), Technical Data: - Max. finished part dimensions (W x H): 180 x 105 mm Gedpeii Rxgofx Ai Asbp - Minimum working width: 23 mm - Minimum working height: 6 mm - Minimum length of individual workpieces: 300 mm - Feed speed: 6 - 12 m/min - Spindle speed: 6,000 rpm - Spindle diameter: 35 mm - Usable length of horizontal spindle: 190 mm - Usable length of vertical spindle: 120 mm - Adjustment range for infeed table and feed guide: 10 mm - Tool diameter on horizontal spindle: 100 mm - Min./max. tool diameter on vertical spindle: 100/124 mm - Profiling capacity vertical spindle: 12 mm - Cutter head adjustment range: +/- 1 mm - Motor power horizontal spindle: 7.5 kW - Motor power vertical spindle: 7.5 kW - Feed motor power: 0.75 / 1.1 kW - Mains voltage: 400 V - Phases: 3 - Line frequency: 50 Hz - Material infeed table length: 2300 mm - Feed roller diameter: - Extraction hood diameter: 1x150 mm, 2x120 mm

Kondisi: baru, Tahun pembuatan: 2018, Saya menjual mesin pelapis tepi untuk komponen cetakan, merek Casadei ALA 10. Cocok untuk elemen-elemen melengkung. Godezkb N Ejpfx Ai Ajbp Kondisi baru, dapat diperiksa!

Kondisi: baru, Tahun pembuatan: 2018, Saya menjual mesin pengamplasan pita lebar Casadei Libra 35 RTC 95 baru, tahun pembuatan 2018. Konfigurasi: Silinder baja Unit gabungan silinder karet keras + sepatu segmen pneumatik dengan fungsi penyesuaian tekanan. Lebar kerja 950mm. Pengaturan ketinggian elektronik dengan tampilan digital. 3-160mm 1 motor 2 kecepatan pengumpanan. Pemrograman penyesuaian tekanan/pelepasan sepatu. Pengaturan sensitif posisi sepatu. Gedpfx Aiszkb Nxe Asbp Pengaturan sensitif posisi silinder. Pengaturan pneumatik tekanan sepatu dan silinder. Rol penekan untuk elemen pendek. Unit pembersih pita pengamplasan dengan tiupan udara. Kondisi BARU! Mesin ini pernah digunakan di ruang pamer. Tersedia segera. Dilengkapi dengan dokumentasi lengkap dan sertifikasi CE.

Kondisi: baru, -Large jointer tables made of cast iron -The jointer table adjustment is accomplished via a precise parallelogram system, which ensures the distance between the table lips and the cutter block remains constant in all positions -The large, stable jointer fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° -The fence tilt can be read directly from the operator’s working position -Standard support fence included -Large, four-knife cutterblock with precision bearings -Smooth operation due to a precision unit and heavy cast iron construction -Powerful industrial motor -Maximum operator safety with very simple operation -Chip removal display via scale -Manual table adjustment -Motor protection switch Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment of chip removal with scale and adjustment knob Safety Guard -The guard is foldable and designed in such a way that it does not hinder the operator while providing maximum safety TERSA Models with Tersa Cutterblock System -No more set-up and screwing -Cutter knives can be changed in seconds -Self-locking -Extremely quiet operation -Perfect planing results This item comes with the Stürmer 3-year warranty upon online registration. Warranty applicable only for end users in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 2750 mm - Width/Depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. chip removal, jointer: 8 mm - Jointer fence length: 1200 mm - Jointer fence height: 190 mm - Jointer fence tilt range: 90 – 45° Extraction Connection: - Extraction port diameter for thicknessing: 120 mm Gsdpfxeu T Hrcj Ai Ajbp Installation Information: - Required length: 2750 mm - Required width/depth: 1604 mm - Explanation of space required: Dimensions consider maximal movement and working lengths. Electrical Data: - Drive motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs. - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm

Kondisi: baru, -Robust steel/grey cast iron construction -Large, ribbed surfacing tables made of cast iron -Vibration-free operation due to high dead weight -Four feed speeds -Motorized thicknessing table adjustment with two speeds and digital display -Chain pressure beam at infeed -Precision-mounted four-knife cutterblock -Helical steel infeed roller for particularly even and gentle wood feed -Outfeed roller with rubber coating -Large surfacing fence, tilt range from 90° to +45° -Standard auxiliary fence included -Powerful industrial motor -Pneumatic quick changeover system with pneumatic lifting and lowering of the surfacing table -The extraction port remains in the same position for both surfacing and thicknessing operations, so no additional extraction hose or time-consuming repositioning around the machine is needed This item includes the 3-year Stürmer warranty upon online registration. Warranty applicable only to end customers in Germany and Austria. Manufacturer: SCM Group S.p.A. Gedpfx Aiju T Hq So Aebp Via del Lavoro 1/3 – P.O. Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 2300 mm - Width/Depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Surfacing: - Total table length: 2300 mm - Infeed table length: 1200 mm - Surfacing table width: 520 mm - Working height: 930 mm - Max. stock removal, surfacing: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90° – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Setup Information: - Required length: 2300 mm - Required width/depth: 1610 mm - Setup dimensions note: Dimensions account for maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Working area note: Add the specified working area dimensions to the setup requirements to determine the recommended free installation space for the machine. Thicknessing: - Thicknesser table width: 520 mm - Working height min.: 3.5 mm - Working height max.: 250 mm - Max. stock removal, thicknessing: 8 mm Electrical Data: - Main motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Kondisi: baru, - Motorized thickness table adjustment with two speeds - Digital display for working height - Thickness table made of cast iron - The thickness table is supported by four large trapezoidal-thread spindles for maximum stability and precision - Four feed speeds - Optional: two rollers in the thickness table - Standard with noise and chip protection curtain at workpiece infeed and outfeed - Adjustable roller pressure - Front infeed roller with helical toothing - Outfeed roller with rubber coating - Powerful industrial motor This item comes with the 3-year Stürmer warranty upon online registration. Warranty applicable only for end customers in Germany and Austria. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (Product) approx.: 1305 mm - Width/Depth (Product) approx.: 1080 mm Gsdpfx Aiju T Hq Ej Ajbp - Weight (Net) approx.: 750 kg Extraction connection: - Extraction port diameter, thickness: 150 mm Setup information: - Required length: 1305 mm - Required width/depth: 1080 mm - Required height: 1197 mm - Placement explanation: The dimensions take into account maximum travel or working lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Working area explanation: Please add the specified dimensions to the required space in order to obtain the recommended free installation area for the machine. Thicknessing: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Working height, min.: 3.5 mm - Working height, max.: 300 mm - Working length, min.: 210 mm - Maximum stock removal: 8 mm Electrical data: - Drive motor power: 9 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 pcs - Cutterhead speed: 4500 rpm - Maximum planing width: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Kondisi: baru, - Rigid steel and cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation thanks to precision units and high dead weight - Standard with forward/reverse spindle rotation and electronic interlock during direction change - Five speeds from 3,000 - 10,000 rpm - Convenient speed change from the machine side - Equipped as standard with MK 4 interchangeable spindle system - Large cast iron worktable for long-lasting precision - Easy handling via control elements and speed display on the front of the machine - Large, precision milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel - Digital display of spindle height to 0.1 mm accuracy - Powerful industrial motors This item includes a 3-year Stürmer warranty with online registration. Warranty only valid for end users in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight (approx.): 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports at fence: 1 - Extraction port diameter at fence: 120 mm Worktable: - Worktable length: 2,500 mm - Worktable width: 810 mm - Table height: 923 mm Installation Information: - Space requirements explanation: Dimensions consider maximum travel paths or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the stated dimensions to the space requirements to obtain the recommended free installation area. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustable from the front via handwheel with numerical digital display - Curved milling guard - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual height and tilt adjustment of milling unit - Control element position: at the machine body - Table configuration: Table extensions left and right and extendable workpiece support (overall width 2,500 mm) Electrical Data: Gbsdpfx Aisu T Hhks Aep - Connection voltage: 400 V - Mains frequency: 50 Hz - Main drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45 ° - Usable spindle length: 140 / 180 mm - Note on usable spindle length: For spindle dia. 30 – 35 / For spindle dia. 40 – 50 mm - Milling spindle travel: 90 mm - Interchangeable spindle: MK 4 - Spindle speeds: 3000/4500/6000/8000/10,000 rpm Maximum Cutter Diameters: - Max. retractable cutter diameter: 320 x 60 mm - Max. cutter diameter for profile milling: 250 mm - Max. cutter diameter for tenoning: 350 mm - Max. cutter diameter for contour milling: 160 mm