Beli Cepat Radial bekas (4.907)

Tahun pembuatan: 1973, Kondisi: bekas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 Spindle speeds - stepless: 70 - 2000 rpm Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Drill radius max./min.: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pieces T-slot spacing: 18 mm Total power requirement: 2.2 kW Machine weight approx.: 1.8 t Space requirement approx.: – Iedegmu A Sepfx Aa Njal Support travel: 590 mm Without rotary table, without tools

Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Spindle taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg Iajdpfxjirax Uj Aa Nol

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Drilling capacity in steel (diameter): 32 mm Throat depth: 636 mm Maximum workpiece height: 720 mm Spindle speeds: 38 - 2000 rpm Thread cutting: 38 - 643 rpm Iodpfx Aewvl Irea Noal Stroke: 450 mm Maximum quill travel: 170 mm Total power requirement: 6 kW Machine weight: approx. 1.9 t Space requirements: approx. 2.5 x 1.5 x 2.2 m Left/right rotation, thread cutting unit Infinitely variable feed adjustment

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, gores kuas bulu: 190 mm, kecepatan spindel (min.): 41 rpm, kecepatan spindel (maks.): 1.800 rpm, berat keseluruhan: 1.920 kg, berat benda kerja (maks.): 17 kg, ketebalan pelat baja (maks.): 32 mm, torsi: 250 Nm, tinggi meja: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE Iajdorn Riqepfx Aa Nsl (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve the table frame) Technical Data: Drilling capacity in solid material: St 60/E335 mm Ø 32 (at feed 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Worktable height: mm 900 Quill stroke: mm 190 Column travel: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Torque at spindle: max. Nm 250 Boom ease of movement: Radial N 25 Boom ease of movement: Axial N 25 Clamping force: Radial Nm 3500 Clamping force: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the middle of the working surface

Kondisi: bekas, Tahun pembuatan: 1988, Drilling capacity in steel (diameter): 50 mm Throat / mm Workpiece height – max. / mm Table dimensions: 1200 x 580 mm Iodpfewt Dwaox Aa Nsal

Kondisi: baik (bekas), Tahun pembuatan: 1984, nomor mesin/kendaraan: 332, Offer 24130 Technical specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drilling spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2,000 rpm - 3 feed rates: 0.1 – 0.3 mm - Min./max. spindle-table distance: 310 / 610 mm - Drilling radius min./max.: 380 / 1,200 mm - Table height: 720 mm - Table size: 1,200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Required space approx.: W 1,200 x H 2,800 x D 2,300 mm - Weight approx.: 1,500 kg - Equipped with: Iaodpfotxzrwjx Aa Nsl - Thread-cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the rear machine side

Kondisi: baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PRJ062775, Machining performance: Drilling capacity in solid St 60/40 mm Drilling capacity in solid GG 20/50 mm Thread cutting capacity St 60/M 36 Thread cutting capacity GG 20/M 42 WORKING AREA: Arm travel (Y-axis) 1050 mm Column stroke (W-axis) 410 mm Quill stroke (Z-axis) 200 mm Distance spindle lower edge – table upper edge, drilling radius 80–690 mm Swivel angle (C-axis) 330 degrees Central clamping of arm and column MACHINE TABLE Clamping surface work table 1800 x 600 mm With 4 T-slots as per DIN 650 in X-direction (width/spacing) 18 h9/125 mm Machine table height 900 mm CONTROL / OPERATION CNC control S-Box III Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides. 215 x 160 mm, Cartesian or polar. Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking, and boring. Chip breaking/relief: possible during drilling cycle Drilling patterns: Linear, circular hole patterns, matrix Standard software: Conversational programming, 38 zero points storable, rotary and mirror function, teach-in for X, Y, Z. Test graphic: Graphic display of hole patterns Data interfaces: V.24/RS 232-C USB: For importing and exporting data, industrial-grade 256 MB MAIN SPINDLE DRIVE: Three-phase asynchronous motor, frequency-controlled Drive power (100% duty cycle) 5.5 kW Torque (100% duty cycle) 250 Nm Constant from 15–200 rpm Infinitely variable spindle speed range 12–2800 rpm Taper spindle: Tool holder as per DIN 69871 SK40 With drawbar as per DIN 69872-19 AXIS DRIVES C-/Y-/Z-/W-axis max. 0.35/0.35/2.90/2.40 kW Rapid traverse speed, infinitely variable Isdjwmcatjpfx Aa Njal C-axis max. 4.5 rpm, Y-/Z-axis max. 7.5/5.0 m/min W-axis max. 3.0 m/min Feed speed, infinitely variable C-/Y-/Z-/W-axis 5–2000 mm/min Feed force (Z-axis) max. 12,000 N LUBRICATION Central manual lubrication MACHINE GUARDING Safety fence system arranged around the machine, with mesh grid External dimensions 6000 x 6000 mm (W x H), system element height approx. 2000 mm 1 access (swing gate at machine front, opening width approx. 2000 mm), manual open/close. Safety door switch with magnetic interlock. ELECTRICAL, PNEUMATIC, HYDRAULIC EQUIPMENT CONNECTION Connected load 400/50 V/Hz Control voltage 24 V Power consumption 13 kVA Fuse 35 A Operating voltage: 3 x 400 V AC / N / PE +5% –10%, N conductor loadable, frequency 50 Hz. PAINTWORK DD textured paint Machine upper part light grey RAL 7035, machine lower part RAL 5023 TRANSPORT DIMENSIONS Width 1,900 mm Depth 2,565 mm Height 2,788 mm MACHINE WEIGHT Machine as transport unit with standard table approx. 2,950 kg OPTIONS: Base plate With surrounding coolant channel, clamping surface 1000 x 1400 mm, height 100 mm, with 4 T-slots Electronic probe Incl. SK 40 holder Pick-up tool magazine Programmable tool change for rear workstation. Magazine unit with 5 tool places including protective cover is mounted on right side of the machine. Coolant unit Version A Integrated in machine base for units without consideration of a base plate. Consisting of: Coolant tank with 35 l capacity, coolant pump complete with fittings, delivery rate approx. 40 l/min at 0.4 bar.

Kondisi: baru, Tahun pembuatan: 2025, kapasitas pengeboran: 40 mm, kedalaman tenggorokan: 1.220 mm, kecepatan spindel (min.): 110 rpm, kecepatan spindel (maks.): 2.900 rpm, berat keseluruhan: 1.710 kg, langkah spindel: 200 mm, penjepit spindle: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Tool holder short spindle: MK 4 Distance spindle center / column, min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: number x width: 3 x 18 mm Distance spindle – table, min. - max.: approx. 375 - 675 mm Iaodpotzkmbofx Aa Nol Distance spindle – base plate (= option), min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feed rates (4): 0.08 - 0.1 - 0.2 - 0.3 mm/rev Main spindle speed range: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive power, spindle motor: 400 V, 50 Hz, approx. 2.2 / 4.0 kW

Kondisi: baik (bekas), DONAU DR 40 Z - high-speed radial drilling machine incl. tooling - Drill spindle mount MK 4 - Quill diameter: 55 mm - Quill stroke: 220 mm - 18 spindle speeds: 35-1800 rpm - Feed rates: 0.075–0.60 mm/rev - Height adjustment of drill column: 450 mm - Drilling radius min./max.: 305–1005 mm - Table size: 1200 x 600 mm - Drilling capacity in steel: 40 mm Iedpfew En Slex Aa Noal - Drilling capacity in cast iron: 50 mm - Thread cutting device in steel: up to M33 - Thread cutting capacity in cast iron: up to M45 - Various tools included – see photos Dimensions: LxWxH: 1.9 x 2.3 x 2.8 meters / Weight: 1800 kg Subject to prior sale and errors in technical data.

Kondisi: baik (bekas), Tahun pembuatan: 1994, nomor mesin/kendaraan: 133120, 24506 Technical Specifications: - Drilling capacity in solid steel ST 60: 35 mm - Drilling capacity in cast iron GG 25: 42 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 36 - Spindle taper: MT 4 - Quill stroke: 170 mm - Spindle speeds, infinitely variable: 20 – 3,200 rpm - Drill feed, infinitely variable: 0.02 – 0.70 mm/rev - Drilling radius approx. min. / max.: 490 / 1,240 mm - Swivel angle: 330° - Table size: 1,200 x 620 mm Isdpfjwndydjx Aa Noal - Table height: 900 mm - Motorized height adjustment / Column stroke: 450 mm - Hydraulic column and boom clamping - T-slots vertically on the left side of the machine - Coolant system - Drive: 400 V / 5.0 kW - Required space approx.: W 1,500 x H 2,600 x D 1,700 – 2,500 mm - Weight approx.: 2,100 kg

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Iaedou Et Nbjpfx Aa Nol Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 2355-2, 24416 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill travel: 150 mm - 18 spindle speeds: 45-2240 rpm - 4 feed rates: 0.1–0.45 mm/rev - Min./max. distance spindle to table: 300 / 700 mm - Drilling radius min./max.: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW Iajdpfx Aoufw S Roa Nsl - Space requirements (approx.): W 1300 x H 2500 x D 2300 mm - Weight (approx.): 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant device - T-slots vertical on the left machine side

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MT 4) • Infinitely variable speed setting • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left side of machine base • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose to table top min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capabilities Drilling capacity (solid material) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Ijdpfx Asx Uwpxsa Nsal Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Kondisi: bekas, Tahun pembuatan: 1978, Machine no.: 40 1008 Rated current: 20 A Voltage: 24 V Machine weight: approx. 3.5 t Iajdpfxjwg Hune Aa Nel

Kondisi: bekas, Tahun pembuatan: 2000, Bohrleistung in Stahl (Durchmesser) 32 mm Ausladung 1000 mm Tischfläche 1055 x 500 mm Iasdpfx Ajx Sy U Sea Nel Aufnahme MK 4 Vorschub - selbsttätig 0,075-0,3 mm/U Drehzahl 45- 2240 U/min Gesamtleistungsbedarf 4,5 kW Maschinengewicht ca. 1,7 t Raumbedarf ca. 2450 x 1300 x 2300 m

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 9.782 h, arbeitsbereich-bohren-bohrleistung Iedpsx R Sirefx Aa Nsal

Kondisi: baik (bekas), Tahun pembuatan: 1985, Spindle speeds - infinitely variable 26 - 1650 rpm Operating voltage 380 V Frequency 50 Hz Rated current 15 A Connected load 6.5 kW Tool holder MK 4 Machine weight approx. 2.3 t Space requirements approx. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connected load: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Iajdpfevylh Ujx Aa Nsl Column traverse speed: 40 mm/s Column stroke: 450 mm Quill stroke: 200 mm Drilling area: 430 - 1150 mm Spindle height adjustment: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Kondisi: baik (bekas), Tahun pembuatan: 1983, 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Ijdswu Ilwopfx Aa Neal Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Spindle mount: MT 4 Speed range: 26 to 1,940 rpm Feed rate: 0.05 to 0.45 mm/rev Table size: 1,520 x 740 mm Clamping surface: 1,370 x 610 mm Arm reach min./max.: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical arm adjustment: mm Horizontal arm adjustment: 720 mm Accessories: Connection power: 6.5 kW Footprint: 1,500 x 1,100 mm 2nd plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1980, Meja kerja 500mm x 1200mm Iasdpfjx N Ih Isx Aa Nsl Pergerakan lengan 600mm Penjepit alat MK 4 Kapasitas pengeboran 32mm pada baja Perangkat pembuat ulir Perangkat pendingin Pelindung pada bor Direkondisi total pada 2026

Kondisi: siap digunakan (bekas), Otto Müller SR 23 Fast Radial Drill - Drill spindle taper (Morse): 30 mm - Longitudinal travel of drill head (X-axis): 750 mm - Height travel of arm (Y-axis): 350 mm - Spindle diameter: 55 mm - Max. drilling depth: 125 mm - Spindle speed: 2400 rpm - Dimensions: 175 x 130 x 215 cm (L x W x H) - Power supply: 380 V Completely new control system, ready for immediate use. Transport available at additional cost. Please also see our other listings. We are looking for industrial machinery year-round. If you have surplus machines, please email us with photos and details. Ijdpfx Aajvilzmo Nsal The seller is not liable for typographical or data transfer errors. The machine’s appearance, technical condition, and wear are commensurate with its age; used machines are sold without warranty. The price shown is exclusive of VAT.

Kondisi: bekas, Tahun pembuatan: 1991, penjepit spindle: MK 4, Meja kerja 600mm x 1200mm Perjalanan lengan 600mm Iasdpfx Aex N If Hea Nsl Pemasangan alat MK 4 Kapasitas bor 40mm pada baja Perangkat pengetapan ulir Perangkat pendingin Dokumentasi

Kondisi: siap digunakan (bekas), Otto Müller SR 30 Fast Radial Drill Drill spindle mount (Morse): 40 mm Longitudinal travel of the drilling head (X-axis): 750 mm Vertical travel of the arm (Y-axis): 450 mm Spindle diameter: 70 mm Maximum drilling depth: 150 mm Speed: 2400 rpm Dimensions: 175 x 120 x 235 cm (L x W x H) Power supply: 380 V Without oil skimmer to the left of the machine in the photo. Transport available at additional cost. Isdjvilzgspfx Aa Njal Call or email for more information. Also check our other listings. We are always looking for industrial machinery year-round. If you have surplus machines, please email details and photos. The seller is not liable for typographical or data transmission errors. The machine’s cosmetic, technical, and wear condition is consistent with its age; used machinery is sold without warranty. The price indicated is exclusive of VAT.

Kondisi: bekas, Tahun pembuatan: 1991, penjepit spindle: MK 4, Meja kerja 600mm x 1200mm Perjalanan lengan 600mm Iasdpfxjx N Ifts Aa Nel Pemasangan alat MK 4 Kapasitas bor 40mm pada baja Perangkat pengetapan ulir Perangkat pendingin Dokumentasi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1976, Work table 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Iodpfxownn S Rs Aa Njal Tapping device Coolant system Electrics 24V control voltage Emergency stop, dual channel Drill guard Completely overhauled in 2025 12 months warranty New paint finish RAL 7035/7031

Kondisi: sangat baik (bekas), Nomor katalog 7866 DATA TEKNIS - Diameter maksimum mata pisau: 300 mm - Diameter lubang mata pisau: 30 mm - Pelindung untuk mata pisau - Tinggi pemotongan dengan mata pisau terpasang: 250 mm, 60 mm - Lebar pemotongan maksimum: 600 mm - Kemampuan pemotongan sudut dalam bidang vertikal – penggeseran lengan atau mata pisau - Kemampuan rotasi lengan kanan/kiri Iajdpfx Ajx U Tymea Nel - Motor: 3 kW - Ukuran meja: 1130x1010 mm - Diameter saluran ekstraksi: 50 mm - Dimensi (panjang/lebar/tinggi): 1150x1190x1510 mm - Berat: 220 kg KEUNGGULAN – Produksi Italia – Tidak dicat ulang – Dokumentasi DTR – Kondisi sangat baik – Gergaji bekas Harga netto: 6.500 PLN Harga netto: 1.550 EUR tergantung kurs 4,2 EUR (Harga dapat berubah tergantung pada fluktuasi nilai tukar)