Beli Crankshaft bekas (111)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Turki
9.668 km
Mesin press eksentrik tipe D 80 ton
CRONOSSTECHCEDP 80
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, lebar meja: 600 mm, panjang meja: 800 mm, tinggi meja: 850 mm, lubang tembus di meja: 190 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 100 mm, Perlengkapan: penghadang cahaya keselamatan, D TYPE ECCENTRIC PRESSES – GENERAL FEATURES
• Steel construction body
• Stress relieving by vibration for the body and welded parts
• Table parallelism and perpendicularity tolerances comply with ISO and DIN standards
• Pneumatic clutch and brake combination – OMPI, Italy
• Ram supported by 8 guides
• Ram with cushion cylinder
• Parts such as ram, connecting rod, and slide block made of GS52 steel casting
• High strength monoblock crankshaft – 4140
• Bronze bushing in connecting rod (Zr14)
• Rear flywheel
• Supplied with spare table
• Hydraulic overload protection
• Motorized table-to-ram adjustment
• Automatic central lubrication
• Pneumatic pedal with latch and dual-hand control with timer
• Electric counter
• PLC application and touchscreen – DELTA
• Electrical switchgear by SIEMENS and SCHNEIDER
• CE conformity – OPTIONAL
• Finger protection light barriers – SICK, LEUZE
• Safety PLC (monitors all electric systems, valves, two-hand and pedal) – PILZ
• Dual-coil safety valve – GPA, TOPAIR
• Position-locked limit switch and control panel
• Safety block
• Protective safety guards in compliance with CE directives
MODEL D TYPE MONOBLOCK FRAME
Capacity 80 Ton
Distance Between Table and Ram 400 mm
Distance Between Side Frames 880 mm
Fjdpfovxhb Ujx Am Ssph
Ram Adjustment 85 mm
Approx. Press Width 1150 mm
Approx. Press Depth 1500 mm
Approx. Press Height 2500 mm
Table Bore Diameter 190 mm
Table Size 600 / 800 mm
Die Clamping Bore Diameter 40 mm
Ram Dimensions 245 / 410 mm
Table Height from Floor 850 mm
Stroke Adjustment 10 / 100 mm
Strokes per Minute 50 spm
Motor Power 7.5 kW
Motor Speed 1450 RPM
Approx. Weight 6,500 kg
Iklan kecil
Turki
9.668 km
Mesin Press Eksentrik Tipe C 250 Ton
CRONOSSTECHCECP 250
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), gaya penekanan: 250 t, panjang langkah: 160 mm, lebar meja: 700 mm, panjang meja: 1.100 mm, kedalaman tenggorokan: 350 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, excentric-press; an excentric mechanism-powered type of mechanical press used in cold forming operations such as punching, cutting, and die shaping. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines.
Fpedpfxjx N Nfbo Am Ssh
CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production.
Key Advantages
Stable stroke performance and high repeatability in serial production
Operator safety-oriented design (light curtain + safety systems)
Low maintenance with central automatic lubrication
PLC control + dual hand/foot pedal operation for production-ready use
Applications
Cold cutting and punching operations
Cold extrusion applications
Metal die forming
High-volume production lines
✅ STANDARD FEATURES
• Steel fabricated frame
• Four-point slide guidance
• Nodular cast iron connecting rods and gear housings
• Crankshaft and transmission shafts made from 4140 tempered steel
• Central automatic grease lubrication system
• Pneumatic clutch and brake combination
• CE safety directive compliant
• Dual-coil safety valve
• Manually adjustable stroke
• Light curtain finger–hand protection system
• PLC control system
• Dual hand/foot pedal operation
• Mechanical safety system
• Emergency reverse motor function
• Occupational safety regulation compliant
• CE standards compliant
✅ OPTIONAL FEATURES
• Anti-vibration mounts
• Touchscreen LCD display (standard for 150–300 ton models)
• Hydraulic safety system (standard for 200–300 ton models)
• Spare bolster plate
• Decoiler, feeder, and straightener
• One set of dies as per request
• 8-point slide guidance
✅ TECHNICAL SPECIFICATIONS (250 TON)
Capacity: 250 Tons
Throat depth: 350 mm
Table–ram distance: 520 mm
Slide–table distance: 630 mm
Distance between side walls: 520 mm
Ram adjustment (shut height): 150 mm
Approx. press width: 2000 mm
Approx. press depth: 2500 mm
Approx. press height: 3100 mm
Front anchorage size: 930 mm
Side anchorage size: 1430 mm
Table hole diameter: Ø250 mm
Table size: 700×1100 mm
Die clamping hole diameter: Ø60 mm
Ram size: 670×380 mm
Table height from floor: 810 mm
Stroke adjustment: 20–160 mm
Strokes per minute: 40 spm
Motor power: 22 + 2.2 kW
Motor speed: 1450 rpm
Approximate weight: 12,000 kg
Note: Please contact us if you require alterations in technical specifications.
✅ PRODUCTION / SUPPLY NOTE
This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.
Iklan kecil
Turki
9.668 km
Mesin Press Eksentrik Tipe C 300 Ton
CRONOSSTECHCECP 300
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 700 mm, panjang meja: 1.200 mm, kedalaman tenggorokan: 370 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH C-Frame Eccentric Press 300 Ton
An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism. It is used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines.
The CRONOSSTECH C-Frame Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production environments.
Key Advantages
- Stable stroke performance and high repeatability in serial production
- Operator safety-focused design (light curtain + safety systems)
- Low maintenance requirement via central automatic lubrication
- Production-ready operation with PLC control + two-hand/foot pedal mode
Application Areas
- Cold cutting and punching operations
- Cold blanking applications
- Metal die forming
- High-volume production lines
✅ STANDARD FEATURES
• Steel frame construction
• Four-sided slide guide
• Spheroidal cast iron connecting rod and gear housings
• Crankshaft and transmission shafts made from 4140 quenched and tempered steel
• Centralized fully automatic grease lubrication
• Pneumatic clutch and brake combination
• Compliant with CE safety directives
• Dual-coil safety valve
• Manually adjustable stroke
• Light curtain finger and hand protection system
• PLC control system
• Two-hand/foot pedal operation system
• Mechanical lock system
• Emergency reverse motor function
• Compliant with occupational safety regulations
• Meets CE standards
✅ OPTIONAL FEATURES
• Anti-vibration mounts
• Touchscreen LCD display (standard for 150–300 ton)
• Hydraulic lock system (standard for 200–300 ton)
• Spare bolster plate
• Decoiler, feeder, and straightener
• One set of dies as per requested specifications
• 8-sided slide guide
✅ TECHNICAL SPECIFICATIONS (300 TON)
Capacity: 300 tons
Throat depth: 370 mm
Table–ram distance: 530 mm
Slide–table distance: 650 mm
Distance between uprights: 470 mm
Ram adjustment (regulation): 150 mm
Approx. press width: 2000 mm
Fpsdpex N Nfhjfx Am Seh
Approx. press depth: 2700 mm
Approx. press height: 3200 mm
Front anchoring dimension: 940 mm
Side anchoring dimension: 1440 mm
Table hole diameter: Ø260 mm
Table size: 700×1200 mm
Die clamp slot diameter: Ø60 mm
Ram size: 780×400 mm
Table height from ground: 810 mm
Stroke adjustment: 20–200 mm
Strokes per minute: 38 spm
Motor power: 30 + 2.2 kW
Motor speed: 1450 rpm
Approx. weight: 13,200 kg
Note: Please inform us if you require any modifications in technical specifications.
✅ PRODUCTION / SUPPLY NOTE
This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Turki
9.668 km
Mesin press eksentrik tipe C 200 ton
CRONOSSTECHCECP 200
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), gaya penekanan: 200 t, lebar meja: 800 mm, panjang meja: 1.100 mm, gaya punching: 200 t, lubang tembus di meja: 220 mm, diameter silinder: 60 mm, penyesuaian langkah: 180 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are mechanical presses designed for cold forming operations such as punching, cutting, and die forming, operating via a force generated through an eccentric mechanism. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for serial production lines.
CRONOSSTECH C-Type Eccentric Press 200 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production.
Key Advantages
Stable stroke performance and high repeatability in serial production
Operator safety-focused design (light curtain + safety systems)
Low maintenance need with centralized automatic lubrication
Production-ready use with PLC control + dual-hand/foot control
Applications
Cold cutting and punching operations
Cold shearing applications
Metal die forming
High-volume production lines
✅ STANDARD FEATURES
• Steel frame construction
• Four-sided slide guide
• Spheroidal graphite cast iron connecting rod and gear bearings
• Crankshaft and transmission shafts of 4140 tempered steel
• Centralized fully-automatic grease lubrication system
• Pneumatic clutch and brake combination
• CE safety directives compliant
• Dual-coil safety valve
• Manually adjustable stroke
• Light curtain finger–hand protection safety system
• PLC control system
Fedjvtyx Iopfx Am Soph
• Dual-hand/foot control system
• Mechanical safety lock system
• Emergency reverse motor movement
• Designed in accordance with work safety regulations
• CE standards compliant
✅ OPTIONAL FEATURES
• Anti-vibration pads
• Touchscreen LCD display (standard for 150–300 ton)
• Hydraulic safety system (standard for 200–300 ton)
• Spare bolster plate
• Decoiler, feeder, and straightener
• 1 die set as per requested specifications
• Eight-sided guiding slides
✅ TECHNICAL SPECIFICATIONS (200 TON)
Capacity: 200 Ton
Throat depth: 340 mm
Table–ram distance: 500 mm
Slide–table distance: 600 mm
Distance between columns: 510 mm
Ram adjustment (setting): 130 mm
Approx. press width: 1900 mm
Approx. press depth: 2400 mm
Approx. press height: 3000 mm
Front anchorage: 920 mm
Side anchorage: 1420 mm
Table hole diameter: Ø240 mm
Table size: 680×1000 mm
Die clamping hole diameter: Ø60 mm
Ram size: 620×350 mm
Floor-to-table height: 805 mm
Stroke adjustment: 20–140 mm
Strokes per minute: 50 spm
Motor power: 18.5 + 0.75 kW
Motor speed: 1450 rpm
Approx. weight: 9200 kg
Note: Please inform us if you require modifications to technical specifications.
✅ PRODUCTION / SUPPLY NOTE:
This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.
Iklan kecil
Turki
9.668 km
Mesin Press Eksentrik Tipe C 125 Ton
CRONOSSTECHCECP 125
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 130 t, lebar meja: 750 mm, panjang meja: 1.000 mm, gaya punching: 130 t, lubang tembus di meja: 220 mm, diameter silinder: 55 mm, penyesuaian langkah: 140 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated via an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines.
CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production.
Key Advantages
Stable stroke performance and high repeatability in mass production
Operator safety-oriented design (light curtain + safety systems)
Low maintenance requirements with centralized automatic lubrication
Production-ready operation with PLC control + dual hand/foot control
Fields of Application
Cold cutting and punching operations
Cold breaking applications
Metal die forming
High-volume production lines
✅ STANDARD FEATURES
• Steel construction body
• 4-sided guided ram
• Spheroidal graphite cast iron connecting rod and gearboxes
• Crankshaft and transmission shafts made from 4140 quenched and tempered steel
• Centralized fully automatic grease lubrication system
• Pneumatic clutch and brake combination
• Complies with CE safety directives
• Dual-coil safety valve
• Manually adjustable stroke
• Light curtain finger–hand protection safety system
• PLC control system
• Dual hand/foot control system
• Mechanical safety system
• Emergency reverse motor operation
• Complies with occupational safety regulations
• Conforms to CE standards
✅ OPTIONAL FEATURES
• Anti-vibration pads
• Touch LCD screen (standard for 150–300 tons)
• Hydraulic safety system (standard for 200–300 tons)
• Spare table
• Decoiler, feeder, and straightener
• One set of die set as per request
• 8-guideway slide system
✅ TECHNICAL SPECIFICATIONS (125 TON)
Capacity: 125 Ton
Throat depth: 310 mm
Table–ram distance: 500 mm
Slide–table distance: 510 mm
Distance between side frames: 450 mm
Ram adjustment (stroke setting): 100 mm
Press width: 1500 mm
Press depth: 2200 mm
Press height: 2700 mm
Front anchoring length: 790 mm
Side anchoring length: 1250 mm
Table hole diameter: Ø210 mm
Table size: 630×820 mm
Die clamping hole diameter: Ø55 mm
Ram size: 500×250 mm
Table height from floor: 785 mm
Stroke adjustment: 10–125 mm
Strokes per minute: 50 SPM
Motor power: 11 kW
Motor speed: 1450 rpm
Weight: 6000 kg
Note: If you require changes in technical specifications, please let us know.
Fpodpfxjvtyvgj Am Seh
✅ PRODUCTION / SUPPLY NOTE
This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.
Temukan lebih banyak mesin bekas
Iklan kecil
Turki
9.668 km
MESIN PERS EKSENTRIK TIPE 40 TON
CRONOSSTECHCECP 40
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, daya: 4 kW (5,44 hp), gaya penekanan: 40 t, lebar meja: 440 mm, panjang meja: 700 mm, gaya punching: 40 t, lubang tembus di meja: 140 mm, diameter silinder: 35 mm, penyesuaian langkah: 80 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric press is a type of mechanical press that operates via an eccentric mechanism to deliver force in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for series production lines.
CRONOSSTECH C Frame Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver a reliable performance suitable for mass production.
Key Advantages:
Stable stroke performance and high repeatability in mass production
Operator safety-focused design (light curtain + safety systems)
Low maintenance requirement with central automatic lubrication
Ready-to-use with PLC control + dual hand/foot control
Fields of Application:
Cold cutting and punching operations
Cold shearing applications
Metal die forming
High volume production lines
✅ STANDARD FEATURES
• Steel welded frame
• Four-sided guided slide
• Spheroidal cast iron connecting rod and gear bushings
• Crankshaft and transmission shafts made of 4140 tempered steel
• Fully automatic central grease lubrication system
• Combined pneumatic clutch and brake
• CE safety compliant
• Dual coil safety valve
• Manually adjustable stroke
• Finger–hand protection with light curtain
• PLC control system
• Dual hand/foot control system
• Mechanical lock system
• Emergency reverse motor function
• In compliance with occupational safety regulations
• Conforms to CE standards
✅ OPTIONAL FEATURES
• Anti-vibration pad
• Touchscreen LCD panel (standard for 150–300 ton)
• Hydraulic safety system (standard for 200–300 ton)
• Spare bolster plate
• Decoiler, feeder, and straightener
• One set of dies according to requirements
• 8-point guided slide
✅ TECHNICAL SPECIFICATIONS (40 TON)
Capacity: 40 Ton
Throat depth: 220 mm
Table–ram distance: 340 mm
Clearance between uprights: 330 mm
Ram adjustment: 60 mm
Fpjdpsvtx Axofx Am Seh
Approximate width: 1050 mm
Approximate depth: 1280 mm
Approximate height: 2100 mm
Front anchoring dimension: 575 mm
Side anchoring dimension: 740 mm
Bolster hole diameter: Ø150 mm
Bolster size: 440×630 mm
Die clamping hole diameter: Ø40 mm
Ram size: 290×180 mm
Table height from floor: 720 mm
Stroke adjustment: 10-70 mm
Strokes per minute: 55 spm
Motor power: 4 kW
Motor speed: 1450 rpm
Approx. weight: 2100 kg
Note: Please let us know if you require modifications in technical specifications.
✅ PRODUCTION / SUPPLY NOTE
This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.
Iklan kecil
Turki
9.668 km
MESIN PRESS EKSENTRIK TIPE D BERKAPASITAS 125 TON
CRONOSSTECHD125
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 125 t, lebar meja: 700 mm, panjang meja: 900 mm, lubang tembus di meja: 210 mm, penyesuaian silinder hidrolik: 100 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES
o Steel construction frame
o Vibration stress relief applied to the frame and welded parts
o Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards
o Pneumatic clutch and brake combination – OMPI-Italy
o Slide guided in 8 bronze bushings
o Ram with cushion cylinder
o Steel cast parts: ram, connecting rod, and pitman – GS52
o High-strength solid crankshaft – 4140
o Bronze bushings inside the connecting rod (Zr14)
o Rear-mounted flywheel
o Spare bolster plate
o Hydraulic overload protection
o Motorized table-ram adjustment
o Automatic central lubrication
o Pneumatic pedal with latch and dual-hand control with timer
o Electric counter
o PLC control and touchscreen – DELTA
Fpsdevxhqvepfx Am Soh
o Electrical switchgear: SIEMENS-SCHNEIDER
o CE conformity – OPTIONAL
o Finger protection light curtains – SICK, LEUZE
o Safety PLC (controls all electrical system, valve, dual-hand and pedal) – PILZ
o Double-coil safety valve – GPA, TOPAIR
o Locked position switch and control panel
o Safety block
o Protective guards in compliance with CE safety directives
TYPE D-TYPE MONOBLOCK FRAME
Capacity 125 Ton
Bed – Ram Distance 500 mm
Distance Between Housings 1000 mm
Ram Adjustment 100 mm
Approx. Press Width 1250 mm
Approx. Press Depth 1750 mm
Approx. Press Height 2850 mm
Table Bore Diameter 210 mm
Table Size 700 / 900 mm
Die Clamping Slot Diameter 55 mm
Ram Size 340 / 550 mm
Table Height from Floor 850 mm
Stroke Adjustment 10 / 125 mm
Strokes per Minute 50 spm
Motor Power 11 kW
Motor Speed 1450 RPM
Approximate Weight 8,500 kg
Iklan kecil
Turki
9.668 km
MESIN PRESS EKSENTRIK TIPE C 150 TON
CRONOSSTECHCECP 150
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), gaya penekanan: 160 t, lebar meja: 920 mm, panjang meja: 660 mm, kedalaman tenggorokan: 320 mm, gaya punching: 160 t, diameter silinder: 55 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, mainly used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it serves as an efficient and reliable solution for mass production lines.
CRONOSSTECH C-Type Excentric Press 150 Ton is designed for stable operation in cold forming applications. Its rigid steel body, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production.
Key Advantages
- Stable stroke performance and high repeatability in mass production
- Operator safety-focused design (light curtain + safety systems)
- Low maintenance needs with centralized automatic lubrication
- Production-ready use with PLC control + dual-hand/foot pedal operation
Applications
- Cold cutting and punching operations
- Cold shearing applications
- Metal die forming
- High-volume production lines
✅ STANDARD FEATURES
• Steel construction body
• Four-way guided slide
• Nodular cast iron connecting rod and gear housings
• Crankshaft and transmission shafts made of 4140 hardened steel
• Centralized fully automatic grease lubrication
• Pneumatic clutch and brake combination
• CE safety directives compliant
• Twin-coil safety valve
• Manually adjustable stroke
• Light curtain finger–hand protection system
• PLC control system
• Dual-hand/foot pedal control system
• Mechanical safety system
• Emergency reverse motor motion
• Compliant with occupational safety regulations
• In line with CE standards
✅ OPTIONAL FEATURES
• Anti-vibration pads
• Touchscreen LCD panel (standard for 150–300 tons)
• Hydraulic safety system (standard for 200–300 tons)
• Spare bolster plate
• Decoiler, feeder and straightener
• 1 custom-designed die set
• 8-way slide guiding
✅ TECHNICAL SPECIFICATIONS (150 TON)
Capacity: 150 Ton
Throat depth: 320 mm
Die–ram distance: 500 mm
Slide–table distance: 540 mm
Clearance between uprights: 500 mm
Ram adjustment (stroke adjustment): 120 mm
Fsdpfjvtywdox Am Sjph
Approximate press width: 1600 mm
Approximate press depth: 2280 mm
Approximate press height: 2750 mm
Front anchorage: 840 mm
Side anchorage: 1300 mm
Table hole diameter: Ø220 mm
Table size: 660×920 mm
Die mounting hole diameter: Ø55 mm
Ram size: 600×290 mm
Table height from floor: 805 mm
Stroke adjustment: 10–125 mm
Strokes per minute: 42 spm
Motor power: 15 kW
Motor speed: 1450 rpm
Approximate weight: 7100 kg
Note: Please inform us if you require modifications to technical specifications.
✅ PRODUCTION/SUPPLY NOTE
This machine is manufactured in Turkey by CRONOSSTECH. All sales, commissioning, and after-sales processes are managed by CRONOSSTECH.
Iklan kecil
Turki
9.668 km
MESIN PRESS EKSENTRIK TIPE D 300 TON
CRONOSSTECHD 300
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, lebar meja: 900 mm, panjang meja: 1.200 mm, lubang tembus di meja: 260 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 200 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY
WARRANTY PERIOD: 24 MONTHS
GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES
- Steel construction frame
- Stress relief of frame and welded parts by vibration
- Table parallelism and perpendicularity tolerance in compliance with ISO and DIN standards
- Pneumatic clutch and brake combination – OMPI-Italy
- Slide mounted on 8 guideways
- Slide cushioning with cylinder
- Slide, connecting rod, ram nose and similar parts in GS52 cast steel
- High strength monoblock crankshaft – 4140
Fjdovyr Eaopfx Am Sjph
- Bronze bushings inside the connecting rod (Zr14)
- Rear flywheel
- Equipped with spare bolster plate
- Hydraulic overload protection
- Motorized table-slide adjustment
- Automatic central lubrication system
- Pneumatic pedal with latch and dual-hand operation with timer
- Digital counter
- PLC application and touchscreen – DELTA
- Electrical switchgear by SIEMENS-SCHNEIDER
- CE compliance (optional)
- Finger protection light barriers – SICK, LEUZE
- Safety PLC (monitors all electrical systems, valves, dual-hand and pedal controls) – PILZ
- Dual-solenoid safety valve – GPA, TOPAIR
- Lockable position switch and control panel
- Safety block
- Protective guards as per CE regulations
TYPE: D-TYPE MONOBLOCK FRAME
Capacity: 300 Tons
Table-Slide Distance: 530 mm
Distance Between Side Walls: 1280 mm
Slide Adjustment: 150 mm
Approx. Press Width: 1700 mm
Approx. Press Depth: 2200 mm
Approx. Press Height: 3500 mm
Table Hole Diameter: 260 mm
Table Size: 900 / 1200 mm
Die Clamping Hole Diameter: 60 mm
Slide Size: 470 / 900 mm
Height from Floor to Table: 1000 mm
Stroke Adjustment: 20 / 200 mm
Strokes per Minute: 38 spm
Motor Power: 30 + 2.2 kW
Motor Speed: 1450 RPM
Approx. Weight: 18,000 kg
Iklan kecil
Turki
9.668 km
Mesin press eksentrik tipe C 100 ton
CRONOSSTECHCECP 100
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines.
The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production.
Key Advantages
• Stable stroke performance and high repeatability in mass production
• Operator safety-focused design (light curtain + safety systems)
• Low maintenance requirement thanks to centralized automatic lubrication
• Production-ready use with PLC control + two-hand/foot pedal operation
Application Areas
• Cold cutting and punching operations
• Cold shearing applications
• Metal die forming
• High-volume production lines
✅ STANDARD FEATURES
• Steel construction body
• Slides supported on 4 surfaces
• Spheroidal graphite cast iron connecting rod and gear bearings
• Crankshaft and transmission shafts made of 4140 tempered steel
Fedpfx Amsvtx Ins Soph
• Central fully automatic grease lubrication system
• Pneumatic clutch and brake combination
• CE safety compliance
• Dual-coil safety valve
• Manually adjustable stroke
• Light curtain hand–finger safety protection system
• PLC control system
• Two-hand/foot pedal control system
• Mechanical safety system
• Emergency reverse motor function
• Complies with occupational safety regulations
• Conforms to CE standards
✅ OPTIONAL FEATURES
• Anti-vibration pads
• Touch-screen LCD display (standard on 150–300 ton models)
• Hydraulic safety system (standard on 200–300 ton models)
• Spare bolster plate
• Decoiler, feeder, and straightener
• One tooling set upon request
• 8-point slide guide
✅ TECHNICAL SPECIFICATIONS (100 TON)
Capacity: 100 Ton
Throat depth: 300 mm
Table–ram distance: 400 mm
Ram–table distance: 465 mm
Distance between side frames: 420 mm
Ram adjustment (stroke adjustment): 85 mm
Approx. press width: 1400 mm
Approx. press depth: 1900 mm
Approx. press height: 2450 mm
Front anchorage dimension: 710 mm
Side anchorage dimension: 1135 mm
Bolster hole diameter: Ø200 mm
Bolster size: 600×780 mm
Die clamping slot diameter: Ø50 mm
Ram size: 405×240 mm
Table height from floor: 775 mm
Stroke adjustment: 10–110 mm
Strokes per minute: 50 spm
Motor power: 11 kW
Motor speed: 1450 rpm
Approximate weight: 4650 kg
Note: If you require any changes in the technical specifications, please contact us.
✅ PRODUCTION / SUPPLY NOTE
This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.
Iklan kecil
Turki
9.668 km
MESIN PRESS EKSENTRIK TIPE D 100 TON
CRONOSSTECHD100
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, lebar meja: 700 mm, panjang meja: 880 mm, tinggi meja: 850 mm, lubang tembus di meja: 200 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 110 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES
- Steel construction frame
- Stress relief for frame and welded parts via vibration
- Table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards
- Pneumatic clutch and brake combination – OMPI-Italy
- Slide (ram) with 8-way guide
- Ram with cushioning cylinder
- Steel cast parts for ram, connecting rod, and slide block – GS52
- High strength, solid one-piece crankshaft – 4140
- Bronze connecting rod bearing (Zr14)
- Rear flywheel
- Spare bolster plate
- Hydraulic overload protection
- Motorized slide adjustment
- Automatic central lubrication
- Pneumatic pedal with latch and dual-hand control with time delay
- Electrical counter
- PLC application with touchscreen – DELTA
- Electrical switchgear – SIEMENS-SCHNEIDER
- CE compliance – OPTIONAL
- Finger protection light barriers – SICK, LEUZE
- Safety PLC (controls entire electrical system, valves, double-hand and pedal) – PILZ
- Dual coil safety valve – GPA, TOPAIR
- Interlock position switch and control panel
- Safety block
- Protective guards in accordance with CE requirements
TYPE D-TYPE MONOBLOCK FRAME
Capacity 100 Ton
Distance Between Table and Slide 450 mm
Distance Between Side Frames 960 mm
Slide Adjustment 85 mm
Approximate Width 1230 mm
Approximate Depth 1650 mm
Approximate Height 2500 mm
Bolster Hole Diameter 200 mm
Bolster Size 700 / 880 mm
Fjdpfjvxhprsx Am Sjph
Die Fastening Slot Diameter 50 mm
Ram Size 245 / 410 mm
Bed Height from Floor 850 mm
Stroke Adjustment 10 / 110 mm
Strokes per Minute 50 spm
Motor Power 11 kW
Motor Speed 1450 rpm
Approximate Weight 7,500 kg
Iklan kecil
Turki
9.668 km
MESIN PERS EKSENTRIK TIPE 60 TON
CRONOSSTECHCECP 60
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, daya: 5,5 kW (7,48 hp), gaya penekanan: 60 t, lebar meja: 590 mm, panjang meja: 800 mm, gaya punching: 60 t, lubang tembus di meja: 140 mm, diameter silinder: 40 mm, penyesuaian langkah: 100 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press; is a type of mechanical press driven by an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines.
CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance, suitable for serial production.
Key Advantages:
- Stable stroke performance and high repeatability for mass production
- Operator safety-focused design (light curtain + safety systems)
- Low maintenance requirement with central automatic lubrication
- Production-ready with PLC control + dual-hand/foot control
Applications:
- Cold cutting and punching operations
- Cold shearing applications
- Metal die forming
- High volume production lines
✅ STANDARD FEATURES
• Steel construction frame
• Four-sided slide guideways
• Nodular cast iron connecting rod and gear bearings
• Crankshaft and transmission shafts made of 4140 normalized steel
• Centralized fully automatic grease lubrication
• Pneumatic clutch and brake combination
• CE safety directive compliant
• Double-coil safety valve
• Manually adjustable stroke
• Light curtain finger–hand protection system
• PLC control system
• Dual-hand/foot control system
• Mechanical safety system
• Emergency reverse motor operation
• Occupational safety regulation compliant
• CE standards compliant
✅ OPTIONAL FEATURES
• Anti-vibration pads
• Touch LCD panel (standard on 150–300 ton)
• Hydraulic safety system (standard on 200–300 ton)
• Spare bolster plate
• Decoiler, feeder, and straightener
• One set of custom die as requested
• Eight-sided slide guideways
✅ TECHNICAL SPECIFICATIONS (60 TON)
Capacity: 60 Ton
Throat depth: 260 mm
Die table–slide distance: 360 mm
Ram–table distance: 395 mm
Distance between uprights: 380 mm
Ram adjustment (stroke regulation): 70 mm
Approx. press width: 1340 mm
Approx. press depth: 1450 mm
Approx. press height: 2200 mm
Front anchor dimension: 630 mm
Side anchor dimension: 875 mm
Fsdpfxovtx D No Am Sjph
Table hole diameter: Ø150 mm
Table size: 520×720 mm
Die holder slot diameter: Ø40 mm
Ram size: 340×220 mm
Table height from ground: 730 mm
Stroke adjustment: 0–95 mm
Strokes per minute: 50 spm
Motor power: 4 kW
Motor speed: 1450 rpm
Approx. weight: 2750 kg
Note: Please inform us if you require any changes in technical specifications.
✅ PRODUCTION / SUPPLY NOTE
This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.
Iklan kecil
Turki
9.668 km
MESIN PRESS EKSENTRIK TIPE D 200 TON
CRONOSSTECHD 200
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, lebar meja: 800 mm, panjang meja: 1.070 mm, lubang tembus di meja: 240 mm, penyesuaian silinder hidrolik: 130 mm, penyesuaian langkah: 160 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY
WARRANTY PERIOD: 24 MONTHS
GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES
- Steel frame construction
- Stress relief on the frame and welded parts by vibration
- Parallelism and perpendicularity tolerance between tables in compliance with ISO and DIN standards
- Pneumatic clutch and brake combination – OMPI-Italy
- Slide (ram) supported by 8 guideways
- Ram with cushioning cylinder
- Parts such as ram, connecting rod, and ram nose made of cast steel, GS52
- High-strength one-piece crankshaft – 4140
- Bearings for connecting rods made of bronze (Zr14)
- Rear-mounted flywheel
- Spare die table included
- Hydraulic safety device
- Motorized table-to-ram adjustment
- Automatic central lubrication system
- Pneumatic pedal with latch and dual-hand control with timer
- Electric stroke counter
- PLC system with touchscreen – DELTA
Fsdjvyr Dijpfx Am Soph
- Electrical switchgear – SIEMENS-SCHNEIDER
- CE compliance – OPTIONAL
- Beam-type finger protection light barriers – SICK, LEUZE
- Safety PLC (controls the entire electric system, valves, dual-hand and pedal) – PILZ
- Dual-coil safety valve – GPA, TOPAIR
- Locked position switch and control panel
- Safety block
- Protective guards included within CE compliance
TYPE: D-TYPE MONOBLOCK FRAME
Capacity: 200 Tons
Table-to-ram distance: 500 mm
Distance between side walls: 1150 mm
Ram adjustment: 130 mm
Approximate press width: 1500 mm
Approximate press depth: 2000 mm
Approximate press height: 3200 mm
Table hole diameter: 240 mm
Table dimensions: 800 x 1070 mm
Die clamping slot diameter: 60 mm
Ram dimensions: 450 x 800 mm
Table height from floor: 950 mm
Stroke adjustment: 20–160 mm
Strokes per minute: 40 spm
Motor power: 18.5 + 0.75 kW
Motor speed: 1450 rpm
Approximate weight: 14,000 kg
Iklan kecil
Turki
9.668 km
MESIN PRESS EKSENTRIK TIPE D 250 TON
CRONOSSTECHD 250
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, lebar meja: 850 mm, panjang meja: 1.150 mm, lubang tembus di meja: 240 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 160 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY
WARRANTY PERIOD: 24 MONTHS
GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES
- Steel construction frame
- Stress relief by vibration applied to main body and welded components
- Table parallelism and perpendicularity tolerances conform to ISO and DIN standards
- Pneumatic clutch and brake combination – OMPI-Italy
- Slide guided by 8-way gibs
- Ram with cushioning cylinder
- Ram, connecting rod, and clutch parts, made of cast steel, GS52
- High-strength monobloc crankshaft – 4140
- Bronze bushings inside connecting rods (Zr14)
- Rear flywheel
- Spare bolster plate
- Hydraulic overload protection
- Motorized table-to-ram adjustment
- Automatic central lubrication system
- Pneumatic pedal with interlock and dual-hand control with timer
- Electric counter
- PLC control and touchscreen panel – DELTA
- Electrical switchgear by SIEMENS-SCHNEIDER
- CE conformity – OPTIONAL
- Safety light curtains for finger protection – SICK, LEUZE
- Safety PLC (controls all electric system, valves, double-hand and pedal) – PILZ
- Double-coil safety valve – GPA, TOPAIR
- Locked position limit switch and main panel
- Safety block
- Protective guards in compliance with CE standards
MODEL: D-TYPE MONOBLOCK FRAME
Capacity: 250 Ton
Shut Height (Ram to Table Distance): 520 mm
Clearance Between Side Frames: 1230 mm
Ram Adjustment: 150 mm
Approximate Width: 1600 mm
Approximate Depth: 2100 mm
Approximate Height: 3400 mm
Table Bore Diameter: 240 mm
Table Dimensions: 850 x 1150 mm
Fpjdpfx Amevyr D Ao Seh
Die Clamping Slot Diameter: 60 mm
Ram Dimensions: 470 x 900 mm
Table Height from Floor: 950 mm
Stroke Adjustment: 20 – 160 mm
Strokes per Minute: 40 spm
Main Motor Power: 22 + 2.2 kW
Motor Speed: 1450 rpm
Approximate Weight: 16,000 kg
Iklan kecil
Jerman
11.023 km
Mesin penggilingan CNC
HellerRFK 20-2-800
Hubungi
Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), de2hu-20240616-1
Fpodpfx Asy S A Nlom Ssh
Iklan kecil
Hessisch Lichtenau
11.072 km
Press eksentrik kolom tunggal, press stamping eksentrik, press penyisipan
WEINGARTENE 40
Hubungi
Kondisi: bekas, Column-Type Eccentric Press WEINGARTEN Type E 40
Machine No. 643/62 Year of manufacture 1963
Press force: 40 tons
Throat depth: 250 mm
Table opening: 150 x 80 and Ø 200 mm
Table size: 560 x 460 mm
Ram surface: 250 x 200 mm
Adjustable ram stroke: 8–88 mm
Ram adjustment: 63 mm
Fjdpotx E Rqsfx Am Ssph
Installation height: 320 mm
Clamping shank bore: Ø 40 mm
Strokes per minute: 100/130 spm
Motor power: 2.2 / 3 kW
Electrical connection: 400 Volt, 50 Hz
Table height above floor: 840 mm
- Clutch-brake combination via WEINGARTEN friction-thread clutch with TDC overrun protection
- Electrical stroke release via two-hand control
- Overload protection via shear plate
- Manual central lubrication
- Front crankshaft support bearing
- Free-standing control cabinet
- Safety device for manual insertion work (UVV compliant)
Required floor space (L x W x H): 1800 x 1500 x 2200 mm
Weight: 3.1 tons
Iklan kecil
Austria
10.648 km
Press eksentrik
HESSE by FRESANFP 100 P
Hubungi
Kondisi: baru, Condition: new
Delivery time: approx. 14-16 weeks from order
Country of origin: Turkey
Price: €70,300
Fpjdpfswiqq Sox Am Soh
Leasing rate: €1,328.67
Pressing force: 100 t
Nominal pressing force at 4.5 mm
Table length: 700 mm
Table width: 1,000 mm
Clear hole in table: 210 mm
Stroke: 1 - 132 mm
Strokes per minute: 58
Ram guides: 6
Ram adjustment: 90 mm
Ram bore: 60 mm
Throat depth: 300 mm
Installation height: 445 mm
Motor: 7.5 kW
Length: 1,650 mm
Width: 1,545 mm
Height: 3,011 mm
Weight: 7,000 kg
Welded steel frame construction
Crankshaft made from AISI4140 (42 CrMo4), ground
Bronze bearings made from SnBz-12
6-way ram guiding
Pneumatic clutch-brake combination
7" touchscreen
Pneumatic ram balancing
Reduction gears in oil bath
PLC for safety functions
Work area secured by light curtain
Power ram adjustment
Mechanical overload protection
Two-hand and foot pedal operation
Adjustable stroke rate (inverter)
Automatic central lubrication
Machine and equipment compliant with CE regulations
OPTIONS:
Vibration pads
€192.00
Clamping plate
€2,580.00
Iklan kecil
Italia
11.084 km
Kogenerator
AB / JenbacherECOMAX 14 - JGS 420 (1,5 MW)
Hubungi
Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 85.000 h, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: gas, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, Pabrik trigenerasi lengkap dengan York absorption chiller.
Dirawat secara berkala dan dilindungi oleh kontrak pemeliharaan preventif dan korektif dari pemasok.
Overhaul besar dilakukan pada tahun 2021 pada 61.000 jam operasi.
Long Block (LB) baru dipasok oleh INNIO pada saat Overhaul Besar, dokumentasi tersedia.
Fpsdpfsy Ibldex Am Seh
• 87.670 jam operasi pabrik;
• 26.904 jam operasi mesin;
Poros engkol tidak pernah dikerjakan ulang, sedangkan blok mesin telah dikerjakan ulang untuk penggunaan liner oversize.
Alternator telah direkondisi, laporan tersedia.
Harga dan informasi lebih lanjut tersedia berdasarkan permintaan.
Iklan kecil
Küçükbalıklı
9.637 km
Mesin cetak eksentrik 160 ton - Rangka C
FresanFP 160P Eccentric Press
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 26.04.21, Fungsionalitas: berfungsi sepenuhnya, Fresan FP 160P - C-Frame Eccentric Press - 160 Tons (1600 kN)
TECHNICAL DATA:
* Capacity: 160 tons (1600 kN)
* Stroke rate: 55 strokes/min (adjustable)
* Distance between table and ram: 500 mm
* Stroke adjustment: 0 - 172 mm
* Ram adjustment: 95 mm (motorized)
* Table dimensions: 800 x 1100 mm
STANDARD SPECIFICATION:
* Equipment in accordance with CE regulations
* Welded steel frame construction
* Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction.
* Bronze bearings, quality grade SnBz-12
* Pneumatic clutch-brake combination
* Fully enclosed, helical-geared transmission in oil bath
* Press safety valve
* Safety PLC & safety switches & light barriers (Pilz)
* 6-point ram guidance with used oil collector
* 7-inch HMI touchscreen control panel
* Adjustable stroke rate with AC inverter
* Motorized ram adjustment
Fsdpfxsnyh S Ro Am Seph
* Mechanical overload safety device (hydraulic overload protection can be installed in a standard machine post-purchase)
* Pneumatic counterbalance cylinders (ISO, 4 units)
* Automatic central lubrication & used oil collector (thin oil / slideway oil)
OPTIONAL EQUIPMENT:
* Extra mounting plate
* Part ejector (upper and/or lower, mechanical or pneumatic)
* Material feeder, loading and unloading systems (decoiler, straightener, pneumatic or servo feed unit)
* Custom-built machine
Iklan kecil
Küçükbalıklı
9.637 km
Mesin cetak eksentrik 130 ton - Rangka C
FresanFP 130P Eccentric Press
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 26.04.21, Fungsionalitas: berfungsi sepenuhnya, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN)
TECHNICAL DATA:
* Capacity: 130 tons (1300kN)
* Stroke Rate: 55 strokes/min (adjustable)
* Distance between table and ram: 500 mm
* Stroke Adjustment: 0 - 132 mm
* Ram Adjustment: 95 mm (motorized)
* Table Dimensions: 700 x 1000 mm
STANDARD SPECIFICATIONS:
* Equipped in accordance with CE regulations
* Welded steel frame construction
* Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction.
* Bronze bushings, quality SnBz-12
* Pneumatic clutch-brake combination
* Fully enclosed gearbox with helical gearing in oil bath
Fpjdpfonyh Siox Am Ssh
* Press safety valve
* Safety PLC & safety switches & light barriers (Pilz)
* Six-point ram guidance with used oil collector
* 7-inch HMI touchscreen control panel
* Adjustable stroke rate via AC inverter
* Motorized ram adjustment
* Mechanical overload protection (Hydraulic protection can be retrofitted as standard after purchase)
* Pneumatic counterbalance cylinders (ISO, 4 pcs)
* Automatic central lubrication & used oil collector (spindle oil / slideway lubricant)
OPTIONAL EQUIPMENT:
* Additional clamping plate
* Part ejectors (upper and/or lower, mechanical or pneumatic)
* Material feeding, loading and unloading systems (decoiler, coil reel, straightener, pneumatic or servo feed unit)
* Custom-built machine
Iklan kecil
Küçükbalıklı
9.637 km
Mesin press eksentrik 100 ton - rangka C
FresanFP 100P Eccentric Press
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 26.04.21, Fungsionalitas: berfungsi sepenuhnya, Fresan FP 100P - C-frame Eccentric Press - 100 Tonnes (1000kN)
Fodpfx Aonxh T Rjm Seph
TECHNICAL DATA:
* Capacity: 100 tonnes (1000kN)
* Strokes per minute: 60 (adjustable)
* Distance between table and slide: 445 mm
* Stroke adjustment: 0 - 132 mm
* Slide adjustment: 95 mm (motorized)
* Table dimensions: 700 x 1000 mm
STANDARD SPECIFICATIONS:
* Equipment in compliance with CE regulations
* Welded steel frame construction
* Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction.
* High-quality bronze bearings (SnBz-12)
* Pneumatic clutch-brake combination
* Fully enclosed, helical-geared gearbox in oil bath
* Press safety valve
* Safety PLC & safety switches & light barriers (Pilz)
* 6-point slide guidance with used-oil collector
* 7-inch HMI touchscreen control panel
* Adjustable stroke rate with AC inverter
* Motorized slide adjustment
* Mechanical overload protection (hydraulic overload protection can be retrofitted to the standard machine after purchase)
* Pneumatic counterbalance cylinders (ISO, 4 units)
* Automatic central lubrication & used-oil collector (circulating oil / slideway oil)
OPTIONAL EQUIPMENT:
* Extra clamping plate
* Parts ejector (upper and/or lower, mechanical or pneumatic)
* Material feeder, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feed unit)
* Customized machine
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Küçükbalıklı
9.637 km
Mesin cetak eksentrik 80 ton - Rangka C
FresanFP 80P Eccentric Press
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 26.04.21, Fungsionalitas: berfungsi sepenuhnya, Fresan FP 80P - C Frame Eccentric Press - 80 Tons (800kN)
TECHNICAL DATA:
* Capacity: 80 tons (800kN)
* Stroke rate: 60 strokes/min (adjustable)
* Distance between table and slide: 400 mm
* Stroke adjustment: 0 - 112 mm
* Slide adjustment: 80 mm (motorized)
* Table dimensions: 600 x 900 mm
STANDARD SPECIFICATIONS:
* Equipment compliant with CE regulations
* Welded steel frame construction
* Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction.
* Bronze bearings, quality SnBz-12
* Pneumatic clutch-brake combination
Fedpfxjnxh Hro Am Soph
* Fully enclosed, helical-geared transmission in oil bath
* Press safety valve
* Safety PLC & safety switches & light curtains (Pilz)
* 6-point slide guidance with used oil collector
* 7-inch HMI touchscreen control panel
* Adjustable stroke rate via AC inverter
* Motorized slide adjustment
* Mechanical overload protection (Hydraulic overload protection can be retrofitted on a standard machine after purchase)
* Pneumatic counterbalance cylinders (ISO, 4 units)
* Automatic central lubrication & used oil collector (thin oil / slideway oil)
OPTIONAL EQUIPMENT:
* Additional clamping plate
* Parts ejector (upper and/or lower, mechanical or pneumatic)
* Material feeding, loading & unloading systems (decoiler/coil reel, straightener, pneumatic or servo feed unit)
* Customized machine
Iklan kecil
Küçükbalıklı
9.637 km
Mesin cetak eksentrik 60 ton - Rangka C
FresanFP 60P Eccentric Press
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 26.04.21, Fresan FP 60P - C Frame Eccentric Press - 60 Tons (600kN)
TECHNICAL DATA:
* Capacity: 60 tons (600kN)
* Stroke rate: 65 strokes/min
* Distance between table and ram: 365 mm
* Adjustable stroke: 0 - 100 mm
* Ram adjustment: 70 mm
* Table dimensions: 500 x 700 mm
Fedpfx Amonwpc Io Seph
STANDARD SPECIFICATIONS:
* Equipment in accordance with CE regulations
* Welded steel frame construction
* Crankshaft made of alloy steel AISI 4140 (42CrMo4). Exceptionally durable and ductile. CNC ground for minimal surface friction.
* Bronze bearings, grade SnBz-12
* Pneumatic clutch-brake combination
* Fully enclosed, oil-lubricated, helical gear drive
* Press safety valve
* Safety PLC control & safety switches & light curtains (Pilz)
* Four-point slide guidance (six-point guidance optionally available)
* Mechanical overload protection (mechanical safety device)
* Pneumatic counterbalance cylinders
* Automatic central lubrication & used oil reservoir (thin oil/slideway oil)
OPTIONAL EQUIPMENT:
* Additional bolster plate
* Adjustable stroke rate with AC inverter
* HMI / touchscreen control panel
* Part ejector (upper and/or lower, mechanical or pneumatic)
* Material feed, loading and unloading systems (decoiler, straightener, pneumatic or servo feeder)
* Custom-built machine
Iklan kecil
Küçükbalıklı
9.637 km
Mesin cetak eksentrik 40 ton - Rangka C
FresanFP 40P Eccentric Press
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 26.04.21, Fungsionalitas: berfungsi sepenuhnya, Fresan FP 40P - C Frame Eccentric Press - 40 Tonnes (400kN)
TECHNICAL DATA:
* Capacity: 40 tonnes (400kN)
* Strokes per minute: 125 spm
* Distance between table and ram: 320 mm
* Stroke adjustment: 0 - 84 mm
* Ram adjustment: 70 mm
* Table dimensions: 450 x 650 mm
STANDARD FEATURES:
* Equipment in compliance with CE regulations
* Welded steel frame construction
* Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction.
* Bronze bearings, quality grade SnBz-12
* Pneumatic clutch-brake combination
* Press safety valve
* Safety PLC control & safety interlocks & light curtains (Pilz)
* 4-way ram guidance
* Mechanical overload protection (from 20 tonnes)
* Pneumatic counterbalance cylinders (from 40 tonnes)
* Manual central lubrication system & waste oil reservoir (thin oil/slideway oil)
OPTIONAL EQUIPMENT:
* Extra clamping plate
* Automatic central lubrication system
Fjdpfjnwmh Sjx Am Soph
* Adjustable stroke rate with AC inverter
* HMI / touchscreen control panel
* Part ejector (upper and/or lower, mechanical or pneumatic)
* Material feeding, loading and unloading systems (decoiler, uncoiling device, straightener, pneumatic or servo feed unit)
* Custom-built machine
Iklan kecil
Küçükbalıklı
9.637 km
Mesin cetak eksentrik 30 ton - Rangka C
FresanFP 30P Eccentric Press
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 26.04.21, Fungsionalitas: berfungsi sepenuhnya, Fresan FP 30P - C Frame Eccentric Press - 30 Tonnes (300 kN)
TECHNICAL DATA:
* Capacity: 30 tonnes (300 kN)
* Strokes per minute: 140
* Distance between table and ram: 305 mm
* Stroke adjustment: 0 - 60 mm
* Ram adjustment: 60 mm
* Table dimensions: 400 x 600 mm
STANDARD SPECIFICATIONS:
* Equipment compliant with CE regulations
* Welded steel frame construction
* Crankshaft made from alloy steel AISI 4140 (42CrMo4), highly durable and ductile, CNC-ground for minimal surface friction
* Bronze bearings grade SnBz-12
* Pneumatic clutch-brake combination
* Press safety valve
* Safety PLC control & safety switches & light barriers (Pilz)
* Four-point ram guidance
* Mechanical overload protection (from 20 tonnes)
* Pneumatic counterbalance cylinders (from 40 tonnes)
* Manual central lubrication & used oil collector (thin oil/slideway oil)
OPTIONAL EQUIPMENT:
* Extra clamping plate
* Automatic central lubrication
* Adjustable stroke rate with AC inverter
* HMI / touchscreen control panel
* Parts ejector (upper and/or lower, mechanical or pneumatic)
* Material feed, loading and unloading systems (decoiler/uncoiler, straightener, pneumatic or servo feeder)
* Customised machine
Fpsdpfxsnwfruj Am Soh
Kami memudahkan pencarian untuk Anda: "crankshaft"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Crankshaft (111)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan













































































































































