Beli Deckel Fp 3 bekas (684)

Kondisi: baik (bekas), Tahun pembuatan: 1975, de1 Nodpszac Sbsfx Aiqewk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW Nwjdpfxovbifgs Aiqok - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Deckel FP 1, tahun pembuatan sekitar 1983 / direkondisi ulang oleh Arnold sekitar 2012 Tampilan digital 3 sumbu, Jarak gerak X/Y/Z 400/150/340 mm, Nwedszfglhjpfx Aiqjk Ukuran meja 600 x 210 mm, Alur-T: 4 Lebar alur-T: 12 mm Kecepatan spindle: 20 - 2000 rpm Tingkat kecepatan spindle kerja: 12 Tingkat feeding: 10 Konektor spindle: MK 4 Jangkauan pinol vertikal: 60 mm Berat mesin kira-kira: 0,8 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Mesin frais universal Deckel FP1 dengan tampilan digital 3 sumbu, kontrol aktif Heidenhain, dan umpan variabel tanpa tingkat. Data teknis: Nwsdpfozrn Tyex Aiqek >> Tahun pembuatan 1982, nomor mesin 2101-1995 >> Meja sudut tetap >> Kecepatan putar: 40 - 2000 RPM >> Umpan variabel tanpa tingkat pada 2 sumbu >> Kecepatan cepat pada 2 sumbu >> Daya penggerak: 1,5 / 1,9 kW >> Rem spindel >> Rentang pergerakan X/Y/Z: 300/160/340 mm >> Kepala frais vertikal pada dudukan spindel, dapat digeser sejauh 100 mm >> Pinol vertikal dan pinol horizontal - SK40 >> Sistem pengencangan S20x2 >> Berat sekitar 800 kg Aksesori dan perlengkapan: >> Tampilan digital 3 sumbu Heidenhain >> Sistem pendingin >> Buku petunjuk pengoperasian, daftar suku cadang Tentang mesin: Ditawarkan mesin frais universal Deckel FP1 dalam kondisi asli yang sangat baik. Mesin ini memiliki sedikit kelonggaran pada engkol dan semua spindel dapat digerakkan dengan mudah. Bahkan pada kecepatan putar tertinggi, mesin frais ini beroperasi dengan tenang. FP1 ini sebelumnya digunakan di bengkel pelatihan sebuah universitas dan jarang digunakan. Pada model FP1 yang lebih baru ini, umpan dapat diatur secara variabel tanpa tingkat pada dua sumbu, dan mesin juga memiliki kecepatan cepat pada sumbu-sumbu ini. Keuntungan besar adalah tampilan digital 2 sumbu aktif. Dengan kontrol posisi Heidenhain ini, Anda dapat memasukkan dimensi yang akan secara otomatis diikuti oleh mesin. Penggantian oli telah dilakukan. Telah diperiksa secara mekanis dan elektrik. Dengan tampilan digital dari Heidenhain, pengoperasian menjadi lebih mudah dan lebih presisi. Manfaatkan kesempatan untuk memeriksa dan mencoba mesin ini secara langsung di lokasi.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Mesin Frais Universal DMG FP4M Edisi Spesial Dilengkapi dengan Tampilan Digital 3 Sumbu ND7013 dari Heidenhain, Kondisi Seperti Baru, Dibuat di Jerman, Sesuai Standar CE!!! Spesifikasi Teknis: >> Tahun Pembuatan 2022 >> Meja Putar yang Kokoh, Luas Permukaan Penjepit 480x800mm >> Penggerak Spindel, Rentang Kecepatan 25-3000 rpm, dapat diatur secara bertahap dengan input pada panel kontrol >> Penggerak Utama yang Dikendalikan, 6 KW >> Kepala Frais Vertikal, dapat diputar +- 90 derajat (180 derajat) >> Sumbu Linear, Rentang Gerakan 6-500 mm/menit >> Gerakan Cepat 1500 mm/menit >> Ruang yang Dibutuhkan (Lebar + Panjang) sekitar 2,2 x 1,9 meter >> Berat sekitar 1600 KG Nsdpfx Ajzung Eoiqewk Aksesori dan Perlengkapan: >> Tampilan Digital Heidenhain ND 7013 >> Sistem Pendingin >> Pelumasan Jumlah Minimal >> Sistem Pelumasan Terpusat >> Kaki Mesin >> Buku Panduan Pengoperasian, dll. Tentang Mesin: Ditawarkan sebuah Mesin Frais Universal DMG FP4M Edisi Spesial dengan Tampilan Digital 3 Sumbu dari Heidenhain ND 7013 dalam kondisi seperti baru. Mesin yang andal dan mudah dioperasikan, dibuat di Jerman. Penggantian oli telah dilakukan. Mesin telah diperiksa secara mekanis dan elektrik. Manfaatkan kesempatan untuk memeriksa dan mencoba mesin ini secara langsung di lokasi.

Kondisi: baik (bekas), Tahun pembuatan: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control, Year of Manufacture 1990, Fully Refurbished in 2014, Excellent Condition, CE-Compliant!! The machine comes from Continental’s training workshop. Nwjdoyalcpjpfx Aiqek Technical Data: Year of manufacture: 1990 Fully refurbished: 2014 Digital Readout: 3-axis active digital display HEIDENHAIN TNC 113 Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Swivel table Clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: - Heidenhain TNC 113 control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels - Coolant system About the Machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a facility where it saw very little use, primarily for training purposes. The machine features a user-friendly control system. Additionally, it offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is straightforward, simply by swiveling the vertical head aside. The guideways are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Deckel under power at our facility. You can find further milling machines from renowned manufacturers on our website.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan rotasi (maks.): 2.500 rpm, kecepatan rotasi (min.): 50 rpm, tegangan masuk: 400 V, Deckel FP4M Mesin frais universal dalam kondisi teknis dan optik yang sangat baik. No mesin: 2203-1389 Tahun pembuatan: 1984. Spesifikasi teknis: - Pergerakan kerja X/Y/Z: 500/400/400 mm - Rentang putaran: 50 - 2500 rpm - Daya: 3,7 / 4,4 KW - Rem spindle - Auto feed: X-Y-Z dapat diatur tanpa langkah 6,3 / 630mm/menit - Rapid traverse X-Y-Z 1300mm/menit - Meja sudut tetap - Flensa vertikal stroke 90mm - Dudukan ISO 40/M16 - Berat sekitar 1500 Kg Njdpsytb Uhefx Aiqowk Opsi mesin: - Pembacaan digital 3 sumbu Heidenhain - Sistem pendingin - Kotak serbuk logam - Pelumasan sentral - Pelumasan impuls otomatis pada kepala frais - Buku mesin dengan daftar suku cadang & skema listrik - Lemari dengan aksesori, lihat foto

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), 1 Njdjy I Adhepfx Aiqewk

Kondisi: baik (bekas), Tahun pembuatan: 1976, Mesin frais alat Deckel FP3 dengan display digital Heidenhain 3 sumbu, mesin dalam kondisi baik. Meja kaku, dudukan spindle SK 40, aksesoris: berbagai collet dan arbor frais, penahan belakang. Dalam kondisi operasi yang baik. Bisa didemokan dalam kondisi menyala atas kesepakatan. Nedpfx Aijxbx R Uoqjwk

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 340 mm, gores kuas bulu: 80 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, panjang meja: 210 mm, lebar meja: 600 mm, tinggi total: 1.750 mm, panjang total: 1.400 mm, lebar total: 1.600 mm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, berat keseluruhan: 850 kg, beban meja: 200 kg, masa garansi: 3 bulan, 001 Njdpfx Aeyi Amwjiqjwk

Kondisi: baik (bekas), Tahun pembuatan: 1966, Universal milling machine Deckel FP2 -WKG 512- Offered here is a universal milling machine from the manufacturer Deckel, model FP2. Nwedpourk Exjfx Aiqjk Technical Data Manufacturer: Deckel Model: FP2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydraulic vice, jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm – 17.5 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3L with 3-axis digital readout K&C NEW, in very good condition Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0924 >> Fixed angle table (clamping surface 1000 mm x 440 mm) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Feed rate from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 kW Nwodpfxsvn N Hds Aiqek >> Travel X/Y/Z: 800/300/400 mm (Y travel can be shifted by an additional 200 mm) >> Equipment: vertical and horizontal spindle >> Extendable vertical and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 1900 kg Accessories and features: >> 3-axis digital readout K&C, newly installed with manufacturer warranty and operating manual. Display unit: Setting reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole pattern, radius milling functions, etc. >> Mechanical centralized lubrication >> Operating manual >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: Offered here is a Deckel FP3L universal milling machine in very good condition. The vertical head can be shifted by 200 mm to allow an even larger working area. A central pump ensures lubrication of the various axes. A particular feature of this machine type is its basic design, as it is equipped with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. This guarantees very high accuracy, as different workpiece weights do not affect axis movements. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the machine on site under power.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Universal tool milling machine Deckel FP 1 – several machines available (see photos) Model: FP 1 3-axis digital readout (Heidenhain) Price: from €9,500 excl. VAT Nodpfxetdcfhs Aiqswk Technical data: X travel: 300 mm Y travel: 150 mm Z travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range – vertical: 250 – 2,000 rpm Spindle speed range – horizontal: 40 – 315 rpm Spindle speed steps (working spindle): 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Kondisi: bekas, Mesin frais universal dengan tampilan digital aktif DECKEL Tipe FP 1 Mesin frais universal No. mesin 2102 - 6130 Tahun pembuatan 1991 Perjalanan sumbu X: 300 mm Y: 150 mm Z: 330 mm Nsdjzinzxepfx Aiqswk Ukuran meja 600 x 210 mm Konektor spindle SK 40 - S20x2 Kecepatan spindle 40-2000 rpm, 16 tingkat Feed otomatis 5 hingga 500 mm/menit Gerak cepat 1200 mm/menit Daya motor 1,6 dan 2 kW dapat dipilih kutub Sambungan listrik 380 Volt, 50 Hz - Tampilan digital aktif 3 sumbu HEIDENHAIN Tipe TNC 113 - Feed variabel tanpa langkah pada sumbu X, Y dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat gearbox - Pergerakan quill pada kepala frais vertikal 60 mm - Kepala frais vertikal dapat dimiringkan dan diperpanjang horizontal 100 mm - Meja sudut tetap 600 x 210 mm - Sistem pendingin pada kaki mesin - Pelumasan terpusat - Panel kontrol berdiri terpisah - Pelindung mesin dengan pintu lipat mengelilingi meja mesin - Wadah serutan asli yang ditempatkan di kaki mesin - Lampu kerja mesin - Penyangga belakang dengan bantalan - Tersedia diagram kelistrikan Kebutuhan area P x L x T 1600 x 1250 x 1750 mm Berat 900 kg Kondisi baik

Kondisi: baik (bekas), Various Deckel FP3 milling machines are for sale, all of which are in good condition. A special feature of this machine is the mounted table, which can be swiveled, rotated, or shifted. Purchasing the machine with a "standard" milling table is also possible. The machine has been cleaned and inspected by us. Nwodpfx Asiz T Exjiqjk On request, safety devices can be installed for an additional charge. Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1,500 kg TECHNICAL DATA Digital readout: 3-axis digital display Travel distances: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid traverse: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Prices are plus VAT Viewing possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, visit our website.

Kondisi: baik (bekas), Friedrich Deckel FP 2 LB Tool Milling Machine Accessories are not included in the scope of delivery, but can be purchased additionally. Nwsdpfegyw S Tex Aiqsk The Deckel FP 2 LB universal milling machine is distinguished by its extremely robust base and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1,000 kg. Another feature is the 45-degree slant bed. After removing the universal table, this design enables the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. In addition, the long travel distance of 800 mm is advantageous for this application. Technical specifications: Deckel Universal Milling Machine FP 2 LB Digital Readout: 3-axis Heidenhain digital readout X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Tool holder: SK 40, draw thread S 20 x 2 Milling head type: vertical milling head Speed range: 40 - 2000 rpm Number of speeds: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Clamping surface of table: 1000 x 520 mm T-slot size: 16 mm Vise: 160 mm Connected load: 9.5 kVA Weight: approx. 1,900 kg Dimensions: approx. 1570 x 1675 x 1850 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items — new and used — in our shop! International shipping costs on request!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, Mesin frais alat universal DECKEL FP 4 MK Dengan display digital aktif Heidenhain TNC 113, 3 sumbu Tahun pembuatan: 1990 Lintasan gerak: X 500 Y 400 Z 400 Rentang putaran: 50 – 2500 rpm Dengan perlengkapan sebagai berikut: Meja sudut tetap, permukaan penjepitan 800 mm x 460 mm Kepala frais vertikal yang dapat digeser Spindel bor yang dapat ditarik keluar Feed tanpa langkah melalui potensiometer Klem alat hidrolik Ragum hidrolik GRESSEL 125 mm Berbagai arbor frais SK 40 Kabinet pelindung cipratan Pompa pelumasan sentral otomatis untuk sumbu X, Y, Z Lampu mesin Nodpfsyycagox Aiqjwk Sistem pendingin 4 unit kaki mesin Manual pengoperasian

Kondisi: baik (bekas), Tahun pembuatan: 1981, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 S20x2 spindle taper. Good, operational condition; can be demonstrated under power by prior arrangement. Nwjdpjuvgnqjfx Aiqek

Kondisi: bekas, Technical details: X-travel: 600 mm Y-travel: 300 mm Z-travel: 360 mm Speed range: max. horizontal: 40–2000 rpm Spindle taper: vertical / horizontal: SK 40 / SK 40 Speed range: max. permissible: 40–2000 rpm Nwjdpfeu U E T Iox Aiqsk Feed rate: 2–3600 mm/min Quill stroke: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Dimensions (LxWxH): approx. 1.8 x 1.35 x 1.95 m Milling machine with slotting head Slotting stroke: 32–80 mm with 10 x double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition Technical Data: Njdpfst Aav Iox Aiqswk >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual. Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.

Kondisi: bekas, Tahun pembuatan: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop inspected Machine no.: 2102-5561 Njdpfx Aer En Dyeiqjwk Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 With active function in X-, Y- and Z-axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 With drawbolt thread S 20 x 2 - Coolant system - Centralised lubrication, electric - Operating manual Sold as seen, without warranty The machine complies technically with the state of the art at the time of manufacture.

Kondisi: baik (bekas), Tahun pembuatan: 1985, Deckel FP1 Aktiv dengan tampilan digital Heidenhain 3 sumbu, 3 sumbu aktif, meja tetap, dudukan spindle SK 40 M16. Pelumasan sentral, buku petunjuk penggunaan. Kondisi sangat baik, siap pakai, berasal dari pusat pelatihan kejuruan. Dapat didemonstrasikan dalam keadaan terhubung listrik sesuai kesepakatan. Njdpfxjxwunzj Aiqewk

Kondisi: bekas, Mesin Milling Universal dengan Display Digital Aktif DECKEL Tipe FP 1 Mesin Milling Universal No. Mesin: 2101 - 7088 Tahun Pembuatan: 1993 Lintasan gerak: X: 300 mm, Y: 150 mm, Z: 330 mm Ukuran meja: 600 x 200 mm Konektor spindle: SK 40 - S20x2 Kecepatan spindle: 40-2000 rpm, 16 tingkat Feed sumbu X dan Y: 5 hingga 500 mm/menit Rapid traverse: 1200 mm/menit Daya motor: 1,6 dan 2 kW, dapat dipindah kutub Njdeziny Ijpfx Aiqowk Koneksi listrik: 380 Volt, 50 Hz - Kontrol aktif dan display digital untuk 3 sumbu HEIDENHAIN Tipe TNC 123 - Feed variabel tanpa tingkat melalui servomotor pada sumbu X, Y, dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi - Perpindahan pinole pada kepala vertical milling 60 mm - Kepala milling vertikal dapat diputar dan ditarik horizontal 100 mm - Meja sudut DECKEL tipe 2114, bisa diputar, dimiringkan, dan diputar berulang - Sistem pendingin cair di bagian kaki mesin - Sistem pelumasan sentral - Panel kontrol terpisah - Pelindung jendela lipat dengan sakelar pengaman - Tray serbuk original untuk dipasang di kaki mesin - Diagram kelistrikan tersedia Kebutuhan ruang (P x L x T): 1600 x 1200 x 1770 mm Berat: 900 kg Kondisi baik

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Deckel FP2 Aktiv mesin frais alat dengan 3-sumbu Heidenhain TNC 111 Aktiv digital display. Mesin dalam kondisi sangat baik, berasal dari departemen pelatihan pemerintah. Meja kaku, dudukan spindle SK 40, Aksesori: berbagai collet dan arbor cutter, penahan balik. Kondisi sangat baik dan siap pakai. Dapat didemonstrasikan di bawah tegangan sesuai kesepakatan. Nsdoxyhmvepfx Aiqswk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list Njdpfx Aju Racreiqswk About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.