Beli Diekstrusi bekas (271)

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Lini ekstrusi karet untuk produksi profil ekstrusi karet Fedpfsyn Ec Ejx Alyogf

Tahun pembuatan: 2026, Kondisi: baru, Extruder 30 mm - 28 L/D with die for welding wire extrusion or profile extrusion with cooling bath with haul-off device Fodpfxoi Tu U Ue Alyegf with water stripper (air knife) with winder and traversing device

Tahun pembuatan: 1981, Kondisi: sangat baik (bekas), UBE 800T ALUMINIUM EXTRUSION PRESS Fgjdpfx Aleggrxcsyof Baujahr: 1979/2008 Abmessungen des Behälters: - Durchmesser 132 mm x 560 mm - Durchmesser 127 mm x 560 mm - Durchmesser 90 mm x 555 mm Leistungsdaten: - Presskraft (maximal) bei 210 kg/cm²: 800 metrische Tonnen - Presskraft (minimal) bei 210 kg/cm²: 697 metrische Tonnen - Servoseite, Kolbenstange ausfahren bei 210 kg/cm²: 112 metrische Tonnen - Servoseite, Kolbenstange einfahren bei 210 kg/cm²: 63 metrische Tonnen - Dichtung Behälter bei 210 kg/cm²: 69 metrische Tonnen - Öffnung Behälter bei 210 kg/cm²: 94 metrische Tonnen - Durchstoßkraft bei 210 kg/cm²: 102 metrische Tonnen - Matrizenschub bei 210 kg/cm²: 12 metrische Tonnen

Tahun pembuatan: 2009, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: P251001170, pl-hu-001 Fgjdpfx Aloxiu Npoyof

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Screw diameter: 59 mm, screw speed: 25–250 rpm, complete with full documentation, control cabinet, screen changer, side feeder, granulator, and additional accessories. Fgsdpshtvmhsfx Alysf

Tahun pembuatan: 2011, Kondisi: baik (bekas), The extrusion line No. 1 was designed for the production of cast film. Processing of thermoplastics within a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - Monolayer film - 3-layer (A-B+C-A) - 5-layer (A-B-C-B-A) LINE DATA: Maximum total extruder output: 2230 kg/h Extruder A: 90/33 L/D, max. 330 kg/h Fgjdjpah U Topfx Alyjf Extruder B: 135/33 L/D, max. 950 kg/h Extruder C: 135/33 L/D, max. 950 kg/h Net film width range: 1600 - 2110 mm Two-roll slitting possible (2x 800 - 2x 1055 mm) Thickness range: 25-580 μm Production speed: 10 - 150 m/min Roll width: 2500 mm Max. roll weight: 2000 kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness measurement system for automated cross-web (TD) profile measurement with dual-side Corona treatment (max. 12,000W) Optical inspection system, including marking system for defect detection, transmitted and incident light system INFRASTRUCTURE (ADDITIONAL UNITS): Dryers 1-4 each with 4500-liter volume; heating capacity 48 kW Dryer 5 with 2500-liter volume; heating capacity 20 kW Dryer 6 with 1500-liter volume; heating capacity 15 kW Each extruder equipped with gravimetric batch dosing system (3 stations) Each extruder equipped with melt pump and 2-piston screen changer system MAIN COMPONENT MANUFACTURERS: SML: Extruders; frame, rollers, winding unit GWK: Cooling extruder KREYENBORG: Screen changer Cloeren: Feedblock, wide slot die PIOVAN: Dryers, dosing system SERVE: Edge trim cutting device MATHO: Extraction system RAPID: Edge trim granulator KONGSHILDE: Edge trim handling, start-up rollers INFSTAUB: Bagging station SMK: Chillers SIEMENS: Control system OCS: Camera system SEMET: Labeling system AFS: Corona station BETA CONTROLL: Radiometric thickness measurement SML: Automatic flying splice winding unit, BECKOFF control SIMCO: Antistatic equipment ALTEK: Automatic roll manipulator (transfer cart)

Kondisi: bekas, Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, BARMAG extrusion line consisting of: 1x Extruder BARMAG BA KEP 90-26.3-S 1x BARMAG Gearbox 9E4-11-103/Z 1x Drive Motor AEG G 16.04 with forced ventilation, 460V, 112A, 46.7kW, 3150rpm, excitation 330V, 2.21A 1x Metering Unit SCHOLZ incl. feed hopper 1x Control Unit Fgjdouakzzopfx Alysf Machine features: - Single-screw extruder, year approx. 1970 - Output 200kg/h - Retrofitted with new screw geometry in 2016 - Screw diameter 90mm - Screw length 2769.5mm - Process length 26.3D - Geometry: intake – barrier – mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation included This system is available 3 times. Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle the system and arrange transport themselves. This is not included in the offer price.

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Fsdpfx Aju Ttf Nelyegf Net weight: 1150 kg Flat die: Films up to max. 330 mm width Calender Roller width (gross): 1200 mm Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Tahun pembuatan: 1970, Kondisi: siap digunakan (bekas), extrusion-line-01 Fgjdpow R Dhrofx Alyjf

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), A complete Artec recycling and extrusion plant is available. Materials: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145 mm, L/D ratio: 42, extrusion output: 700 kg/h, degassing: double vented, drive power shredder/extruder/screen changer: 55 kW/609 kW/55 kW. Overall plant dimensions (L/W/H): approx. 20,700 mm/3,000 mm/3,400 mm. Control system: Siemens. Includes shredder, conveyor units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot-cut pelletizer, bag filling and weighing station, and bagging station. Documentation is available. On-site inspection is possible. Fgsdpfx Aljv Ip S Hoyof

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Control panel: Siemens SIMATIC HMI, connected load: 80 kW, weight: 1.85 t, operating hours: approx. 4,500 h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Complete documentation is available, on-site inspection possible. Fodpfx Alev Uz Awjysgf

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A complete Artec recycling and extrusion line is available. Suitable materials: PE/PP/PS/ABS/LDPE/HDPE/MDPE. Screw diameter: 125 mm, L/D ratio: 42, extrusion output: 650 kg/h, degassing: double venting, drive power for shredder/extruder/screen changer: 55 kW/512 kW/55 kW. Total system dimensions L/W/H: approx. 20,700 mm/3,000 mm/3,400 mm. Control system: Siemens. Includes shredder, conveyor units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot die-face pelletizer, bag filling and weighing station, and bagging station. Documentation available. On-site inspection possible. The system has extensively documented faults. Fgedpov Ip Syofx Alyef

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), A total of three extruders are available, including throughput measurement units (scales), almost new cylinders (2018), and refurbished screws. Total extrusion capacity: approx. 100 kg/h. 1) DC smooth barrel extruder, motor power: 17 kW, machine dimensions (L/W/H): approx. 2300 mm / 600 mm / 1100 mm. 2) DC smooth barrel extruder, motor power: 32 kW, machine dimensions (L/W/H): approx. 3000 mm / 700 mm / 1200 mm. 3) DC grooved barrel extruder, motor power: 49 kW, machine dimensions (L/W/H): approx. 3000 mm / 700 mm / 1200 mm. An on-site inspection is possible. Fgjdpfsvw Aqhjx Alyjf

Jam operasional: 54.000 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, CINCINNATI PROTON 60-30G Diameter sekrup: 60 mm, L/D = 30 Zona pengumpanan beralur Output: sekitar 450 kg/jam PE Fedpfx Alsyrihgjyjgf Motor (penggerak DC): 163 kW Kecepatan putar sekrup: maks. 221 rpm Zona alat: 5 unit + 1 unit untuk adaptor Sensor tekanan & suhu lelehan termasuk Kontrol: Cincinnati EXc Pro-NT Silinder dengan lapisan bimetal - kondisi: baik Sekrup dengan lapisan keras dan zona pengumpanan yang diperkeras - kondisi: baik Dimensi (P x L x T): 2.580 x 1.430 x 1.800 mm Berat: 2.500 kg

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), EKSTRUDER EXTRUDEX EN50-30D, Tahun Pembuatan 2007, Nomor 4101264, dilengkapi dengan pompa lelehan, pengubah saringan, dan kepala ekstrusi 5 lapis. Tahun Pembuatan 2007. Serta 4 ekstruder tambahan EXTRUDEX EN25-25D, Tahun Pembuatan 2007. PENGGUNAAN: Pembuatan pipa PE 5 lapis. Diameter maksimum 32 mm. RINCIAN: 1 ekstruder utama satu sekrup EN 50. 4 ekstruder tambahan satu sekrup. Fgodovyaxuspfx Alyef Sistem ekstrusi ini adalah milik saya. Lokasi: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Jerman.

Tahun pembuatan: 2006, jam operasional: 15.000 h, Kondisi: baik (bekas), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250-350 kg/h Currently, the system is processing HDPE, but it is also suitable for other plastics such as LDPE... Fgedpfx Aljumubyjyjf The machine can be inspected during operation. A new extruder screw was installed in February.

Tahun pembuatan: 2017, Kondisi: baik (bekas), Dijual ekstruder bekas Xtrutech XTS 24. Ekstruder ini berfungsi penuh dan telah digunakan di bidang powder coating, lengkap dengan banyak suku cadang. Kami dapat menawarkan ekstruder ini dengan dosing Brabender dan sabuk pendingin. Fedpfjvcynuex Alyjgf

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: Serien Nr. 64019447, Used Coperion Werner & Pfleiderer ZSK 34 MvC twin-screw extruder available for sale. The extruder was previously used for powder coatings. Fgsdpfovcyk Nsx Alyof

Tahun pembuatan: 2000, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Lini produksi / ekstrusi lembaran polipropilena hingga ketebalan 80 mm x lebar 1.200 mm. n. 01 mesin CN dengan 8 alat, dikontrol Siemens, meja 2520x1700 mm n. 01 mesin CN dengan 8 alat, dikontrol Siemens, meja 2520x1260 mm Fodpfoxwnb Iex Alyjgf n. 01 mesin CN dengan 10 alat, dikontrol Osai, meja 4.000x1.800 mm n. 01 ekstruder PPH untuk lembaran lebar 1230 mm dan unit pemotong n. 01 mesin las PPH mekanis/pneumatik untuk plat/rangka n. 01 mesin las PPH pneumatik untuk rangka n. 01 mesin las PPH hidraulis/pneumatik untuk pegangan n. 01 mesin las PPH hidraulis untuk lembaran lebar 3.000 mm n. 02 forklift, masing-masing 2.500 kg n. 01 penghancur PPH 100 kg/jam n. 03 ekstruder PPH portabel n. 02 vacuum lift 150 kg/masing-masing

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, Linea completa di estrusione per la produzione di film termoretraibile in PVC, specificatamente progettata per applicazioni sleeve-label. Costruita nel 2022 da RL Plastproject (Italia), la macchina è nuova, mai installata e immediatamente disponibile. Caratteristiche tecniche: - Prodotto: Film termoretraibile in PVC per sleeves - Materiale: Dry blend PVC rigido Fgsdow Ahfgspfx Alyef - Estrusore: Monovite con degasaggio e dosaggio gravimetrico - Capacità produttiva: circa 180–200 kg/h - Spessore film: 40–80 micron - Larghezza utile film: fino a 620 mm - Larghezza filiera: 900 mm - Velocità di linea: fino a 60 m/min (in funzione della tipologia di film) - Raffreddamento: Calandra con rullo refrigerato - Orientamento: Unità di formazione shrinking trasversale - Trattamento corona: Integrato - Avvolgitore: Taglierina‐riavvolgitrice bi‐posizione - Sistema di controllo: PLC Siemens con interfaccia touchscreen HMI - Potenza installata: ~220 kW (da confermare) - Aria richiesta: 6 bar - Ingombro: circa 25 x 6 metri

Kondisi: baik (bekas), Tahun pembuatan: 1994, Model: NE 12 Tipe Sekrup: Sekrup tunggal Tahun pembuatan: 1994 Diameter sekrup: 130 mm Rasio L/D: 30 L/D Daya penggerak: 350 kW Termasuk: Fgjdpfxeyxpbuo Alysf • Mesin masih beroperasi saat dibongkar • Mesin memproduksi pipa 710 mm • Output pada HDPE sekitar 1.000 kg/jam • Kepala ekstrusi 800 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, jam operasional: 87.618 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: DS 85610, berat keseluruhan: 4.000 kg, panjang total: 5.200 mm, lebar total: 1.700 mm, tinggi total: 2.500 mm, daya: 75 kW (101,97 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, arus masuk: 160 A, Extruder WEBER 8.8 asli dengan laras yang diperpanjang menjadi model 8.22. Dengan sekrup baru dan orisinal dari Weber. Fedpfxox Apcke Alyegf Panel kontrol HMI, pernah digunakan di lingkungan ruang bersih. Dilengkapi dengan hopper. Mesin dijual dalam kondisi apa adanya.

Kondisi: baik (bekas), Enkelschroef Schroefdiameter 25 mm Afmetingen (LxBxH) 1860 x 900 x 1850 mm Opties Fgjdpfx Ajvri Ddslysf • Inclusief afzuigeenheid • Inclusief koelbad

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, diameter sekrup: 85 mm, Complete extrusion line. Individual components can also be offered upon request. The line has been used for the production of pipes made from PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws replaced in 2019) - Side feeder - Complete control system for dosing units and extruder - Single oil temperature control unit - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250-4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table Fjdpfx Aleu Rda Isyegf

Tahun pembuatan: 1983, Kondisi: baik (bekas), This WEBER extruder is located at Plastima Used Machinery in the machine warehouse. The machine dates from 1983 and is in excellent condition. – Brand: Hans Weber GmbH – Model: ZE 30 – Year of manufacture: 1983 – Single-screw extruder – Screw diameter: 30 mm – Ratio: 20 L/D Fgodpfeq Tr Tbsx Alyjf