Beli Dimter bekas (49)

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Technical data: Model: OptiCut S75-4 Nwsdpewtgcxofx Abuob Manufacturer: GreCon Dimter Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Kondisi: baik (bekas), Tahun pembuatan: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Infeed table: automatic / throughfeed system Outfeed table 3 ejectors on the left outfeed table. Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included. Njdpfx Aet Ir Nqobuswb

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fully automatic, programmable cross-cutting with additional defect marking detection for error removal via LUT system. Nodpfx Abel H E Tajuewb Infeed conveyor length: 6 m 6 ejection stations, total length 12 m Currently, the infeed conveyor is not operating; the issue is likely due to the frequency inverter.

Kondisi: sangat baik (bekas), DIMTER HK 400 – LINI OTOMATIS UNTUK PENYAMBUNGAN KAYU DENGAN TENON MIKRO Nwodpfx Aexvniiebusb Dijual: lini produksi otomatis penuh untuk penyambungan kayu dengan tenon mikro, DIMTER Tipe HK 400 E/D. Sistem canggih ini dirancang untuk memaksimalkan efisiensi dan kualitas penyambungan kayu keras dan lunak.

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, diameter pemasangan: 50 mm, jenis arus masuk: tiga fasa, diameter alat: 50 mm, panjang alat: 330 mm, frekuensi input: 50 Hz, Alat Prasetel Alat WEINIG Opticontrol Nodpfx Abexwnvroujwb Diameter lingkar luar: 0 - 300 mm Panjang alat: 0 - 330 mm Diameter batang: 50 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SK-K-24001, 1 optimised cross-cutting system with scanner manufacturer: dimter Njdpfx Ajwya Syjbujwb type: opticut 450 year of manufacture: 2015 item no.: sk-k-24001 dimter cross-cutting system with 1 x opticut 450 and f 100 infeed system including luxscan combiscan+ c 200 with curvature measurement the system was in operation until 2024, has been professionally dismantled, and is available for inspection in its current condition.

Kondisi: baik (bekas), Tahun pembuatan: 2006, de-1 Nwsdpfextxi Iox Abueb

Kondisi: baik (bekas), Tahun pembuatan: 2005, de-4789672b Nwodpextxg Hefx Abueb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, I am selling a set of 3 GRECON DIMTER belt conveyors, suitable for industrial use, for example in the wood industry or for material handling, etc. Total length of each conveyor: 2.00 m Belt width: 300 mm Drive via electric motor: 0.37 kW / 0.55 HP Fully operational. Available immediately. Nedpfot Rt I Hox Abujwb

Kondisi: siap digunakan (bekas), Glue application unit with 2 rollers Adhesive application Njdpoht Rtasfx Abuewb - Glue application for package heights up to 300 mm 1 application roller and 1 dosing roller - 1 unit left - 1 unit right - suitable for DIMTER HK200 + HK400 + HK800 + HK1000 Dimter spare parts Dimter accessories

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jam operasional: 5 h, Hydraulic cylinders in various sizes in stock Nwjder Hnfcjpfx Abueb more available on request or also in the jöma shop These black-painted units were used for a maximum of 1-5 hours on a prototype patent press

Kondisi: baik (bekas), Sorting system, sorting conveyor belt, sorting section downstream of an optimizing saw. Conveyor length: approx. 8,000 mm Nwsdpfx Abeg Ufnxjujb Conveyor belt width: approx. 250 mm Working height: without legs Drive: without motor 5 pcs. pneumatic buffers Belt is dismantled for transport; cables and hoses need to be replaced.

Kondisi: baik (bekas), Paddle ejector for sorting conveyor Njdpfjqmizdsx Abuswb Length: approx. 600 mm Working height: 850 mm Drive: Rexroth servo motor Several available, also in other lengths

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Dimter optimizing cross-cut saw 350 with elevated working height of 1400 mm Cross infeed as per image Cross-cut saw Control cabinet Scanner interface Sorting section 6500 mm long with 3 pushers Nodpjncc Icefx Abuowb Waste flap Machine has already been dismantled and is available immediately The machine was running without any issues until dismantling Transport can be arranged

Kondisi: baik (bekas), Traversing crosscut saw For crosscutting of glulam lamellas Machine length 2200 mm Machine width 1200 mm Nwodjg E Iqfepfx Abusb Working height 850 mm without control system

Kondisi: bekas, Tahun pembuatan: 1997, Dimter Profi Joint 600 KD Jalur Mesin Finger Joint Kapasitas lini: 2,5 papan per menit. Dimensi papan: P = 900 mm, T = 180 mm, L = 600 mm. Jika volume maksimum satu papan penuh adalah 0,081 m³ x 2,5 = ~0,2 m³, maka material dapat dimasukkan ke mesin dalam satu menit. Namun, ini sangat bergantung pada ukuran bahan baku yang dimasukkan. Meter lari: Kami memproses 10.000–12.000 meter dalam satu shift 8 jam. Bahan baku yang digunakan tebal 24 mm dan lebar 98 mm. Panjang bahan baku antara 200 hingga 60 m. Nodsxmvxyopfx Abuewb Sudah dibongkar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Grecon Ultra Finger Jointing Line - Made in Germany - Year of manufacture: 2001 - Suitable for softwood and hardwood - Technical documentation (DTR) available TECHNICAL PARAMETERS: Min./max. element length: 150/1000 mm Min./max. element width: 40/205 mm Min./max. element height: 20/80 mm Nwedpfjrf Ty Sjx Abuob Min. length / max. width ratio: 2:1 Min./max. starting length: 3000/6100 mm Saw blade motor power: 5.5 kW Saw spindle diameter: 30 mm Milling motor power: 22 kW Milling spindle diameter: 50 mm Total line length: 11,500 mm Width: 5,300 mm Total power consumption: 39 kW Air pressure: 8 bar Air consumption: 660 NL/min Suction nozzle diameter: 250 and 100 mm Extraction requirement: 6,150 m³/h at 30 m/s Transport dimensions: 13,00 m x 2,20 m x 2,00 m Weight: 6,700 kg

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Nedpfx Aju Atmuobuswb Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2301.14, Garis pemotongan melintang kayu gergajian, lebar kayu 20 - 300 mm, tinggi 10 - 100 mm Nwsdpow Rr Dbofx Abuob

Kondisi: baik (bekas), The machine has been overhauled many new parts Nedpfxov Ihdzs Abuswb new wiring new hydraulic unit The machine has been inspected and is operational. We can provide a video.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Grecon Combipact finger jointing line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short timber sections into longer elements using finger joint connections. This process allows the utilization of wood offcuts for the production of high-quality structural components such as beams, scantlings, or panels. Technical specifications: 1. Input length of elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2. Width of elements: - Minimum width: approx. 20-40 mm - Maximum width: approx. 200 mm Nodpfx Abeuiz I Roujwb 3. Thickness of elements: - Minimum thickness: approx. 15-20 mm - Maximum thickness: approx. 80 mm 4. Final length after joining: - Standard maximum length after joining: from 6000 mm 5. Output capacity: - Typical production capacity ranges from 5 to 15 joints per minute, allowing processing of up to 3000 linear meters per hour. 6. Type of joints: - Finger joints, precisely manufactured to ensure durable and strong connections. 7. Pressing force: - The hydraulic press usually applies pressure from several to a dozen tons to efficiently bond the elements. 8. Control system: - PLC control system providing process automation with the ability to set various finger jointing parameters. 9. Gluing: - Grecon Combipact lines are equipped with automated glue application systems that accurately dispense the required amount of adhesive. 10. Power supply: - Standard supply: 400 V, 50 Hz

Kondisi: sangat baik (bekas), jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Automatic Grecon Dimter Ultra Finger Jointing Line The machine has undergone a complete overhaul. Specifications: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Spindle diameter: Ø50 mm - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Cutter motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding Table: - Min. board length: 150 mm - Max. board length: 700 mm - Feed rate: Infinitely adjustable Nsdpfx Aeuddvaebuswb Dust Extraction: Chipper extraction nozzle diameter: Ø100 mm Cutter extraction nozzle diameter: Ø150 mm Extraction capacity (flow rate): approx. 2,400 m³/h Pneumatics: Operating pressure: 6 bar Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Lamella width: 25–160 mm - Finished lamella length: approx. 6,000+15-50 mm - Pressing force: 3–7.5 T (3,000–7,500 daN) Crosscut Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust Extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (flow rate): approx. 400 m³/h Pneumatics: - Operating pressure: 6 bar - Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Work: 1. Cleaning of machine bodies and application of new paint 2. Replacement with new bearings on: main spindle of tenoner; saw spindle of the press; linear bearings on the tenoner table carriage guide; bearings on conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, assembly of a glue tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for cylinders, solenoid valves, and other pneumatic components in the machines; 7. Replacement of gears and double roller chain on the press’s belt-chain feeder. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders; replacement of worn solenoid valves with new ones. 10. Replacement with new operator panels with graphics on the tenoner control cabinet, press control cabinet, and auxiliary press control panel. 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of machine and press controlling PLCs, adaptation of the machine control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the outfeed table pusher; 14. Overhaul of the electrical installation in the control cabinets, modernization, and drawing of the electrical diagram. 15. Installation of guards, mesh guards, necessary labels, safety stickers, manufacturer’s logo, and nameplates. 16. Replacement with new V-belts, inspection of pulleys, gear motors, and motors; 17. Replacement with new limit switches, inductive sensors, and photoelectric sensors (photo-cells) We specialize in finger jointing machines. Installation, commissioning, and operator training within Poland included in the price; in other countries, available at extra cost. We provide service and access to spare parts.

Kondisi: siap digunakan (bekas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Nwsdpfx Abom Habdjueb

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Optimalizer Grecon Dimter OptiCut 304R Panjang kayu masuk minimum: 500 mm (dengan pemuatan di meja pendukung) Nodpfx Absx Up Nqjuewb Panjang kayu masuk minimum: 900 mm (dengan pemuatan di konveyor rantai melintang) Panjang kayu masuk maksimum: 6300 mm Lebar kayu min./maks.: 40-200 mm Tebal kayu min./maks.: 15-80 mm Penampang kayu maks.: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Diameter mata gergaji: 400 x 30 mm Kecepatan putaran mata gergaji: 4200 rpm Kecepatan maju maks.: 230 m/menit Mode pemotongan: – pemotongan dengan panjang tetap – optimasi panjang papan untuk memaksimalkan hasil – pembuangan cacat kayu dengan penandaan cacat menggunakan kapur