Beli Dosing bekas (1.261)

Kondisi: bekas, - Dimensi: 1050 x 660 x 990 mm - Berat kosong: 62 kg - Berat operasi: 192 kg - Pendinginan air presisi hingga +0,5°C, ideal untuk aplikasi bakery dan pastry - Tangki stainless steel berinsulasi dinding ganda, volume efektif: 135 liter - Mudah dibersihkan: sudut membulat, desain higienis dan mudah diakses - Laju aliran air hingga 10 L/menit (dengan gaya gravitasi) Kdodpfx Ajw Ducbeaysw - Termasuk kit dosis DMA untuk pengukuran air presisi dalam resep Anda

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Volumetric dosing - With built-in agitator - Twin screw system Kdedpot Akaqefx Aaysw - Integrated tamping unit for materials with low bulk density

Kondisi: bekas, Fuel tank capacity (liters) 100 Motorized pumps Up to 2 external pumps per tank Ksdpfx Aaovpfhyoyodw Dosing capacity Max. 50 cc/sec per pump Technical remote support

Kondisi: sangat baik (bekas), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heat sink, SW = front wall angle) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and PCBs is conveyed via the transfer belt into the dispensing area. - It is stopped at the lift-positioning unit (HuPo), lifted off and fixed in position. - The x-y-z handling system moves the dispensing head to the designated spot and initiates the dispensing process. - After successful dispensing, the handling moves to the park position and the WT is placed back onto the conveyor. - The WT is then transported further to the assembly area KK+SW (prerequisite: no WT in placement position). St.3.2: Assembly Area KK+SW - A WT is conveyed from the dispensing area into the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off and secured. At the same time, the chassis side walls of the partially assembled unit are aligned. - Simultaneously, KK tray and SW tray positioning occurs. - A stack of KK trays (12) and a stack of SW trays (12) are manually placed on the respective infeed conveyors outside the safety enclosure. - Both safety interlocks are opened, allowing the stacked trays to move into the gripping position of the stacker. - The safety interlocks are then closed again. - The respective grippers pick up the corresponding tray. - Using the Z-axis, the tray is separated and transported upwards (above the removal height). - For centering and stability, a centering support is inserted and positioned under the respective tray using the x-handling. - With the stacker Z-axis, the tray is placed onto the corresponding centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the heat sink (KK) is picked from the tray and placed in an intermediate position to aid alignment (to eliminate inaccuracies during pick-up, ensuring a defined gripping position for assembly). - The KK is scanned, gripped again, and if the scanner result is OK, mounted onto the WT. - Any not-OK KK is placed in a reject box. - The multi-gripper on the SCARA robot then picks the SW from the tray and places it in the alignment position. - The SW is gripped again and mounted onto the WT. - Process continues with Assembly Area Front. Kdedpfx Aasibx S Neyow Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Repeatability Horizontal: +/- 0.025 mm Repeatability Vertical: J3: +/- 0.01 mm Repeatability Orientation: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling electrics: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: outer diameter 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting type: ceiling IP protection class: IP20 Power and signal cable: 3 m Other assembly modules in various sizes – new and used – available in our shop! International shipping rates on request.

Kondisi: bekas, Dos P016, Scheugenpflug, piston dispensing system Kdoder Izd Ujpfx Aaysw Model: Dos P016 Condition: Used

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Two customized, yet reprogrammable and adaptable mixing and dosing systems for 2-component polyurethane mixtures are available. 1) Sealing and Foaming System Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g-0.15g/s, material: 2C PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Sealing and Foaming System Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g-2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems feature peripheral devices and systems for monitoring and controlling temperature, viscosity, mixing, refilling, and other processes. The systems can presumably be configured for any mixing ratio – but exclusively for polyurethane. Documentation available. On-site inspection possible. Kdodpfx Aaow Hgltsysw

Kondisi: bekas, Hot-melt adhesive applicator, glue machine, hot melt glue machine, industrial hot melt glue gun, hot melt applicator gun Kedpjdntftsfx Aaysdw - Module for: hot melt adhesive system - Quantity: 4 units available - Price: per piece - Dimensions: 100/30/H30 mm - Weight: 0.3 kg

Kondisi: siap digunakan (bekas), The FlexWall®Plus FW40/5 is a metering unit designed for semi- to poorly-flowing bulk materials. Its main components include: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massaging paddles, a metering screw, a screw tube, a three-phase drive, and a trapezoidal extension hopper with a capacity of either 50 dm³ or 70 dm³, all in a low-profile design. The shape of the trough and the externally mounted massaging paddles, which feature adjustable amplitude, ensure consistent screw fill levels and gentle mass flow for bulk materials. With the FW40/5, screw changes are exclusively performed from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning; the polyurethane trough, which is simply fitted onto the housing edge, can be effortlessly removed. Additionally, the compact trapezoidal design permits space-saving arrangement of up to six feeders around a central feed point. Ksdpfx Aaswnr Trsyedw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, COMAS Volumetric Dosing Machine model DN (refurbished, with new dosing unit) Specialized machine for dosing 'pandispan' mixture and creams onto bases: a) Pandispan onto moulded trays with diameter mm=240–260 and thickness mm=7-12, or rectangular shapes with custom circumscribed dimensions. b) Creams onto the bases mentioned in a), in multiple layers (optional). Machine composition: - Main frame made of stainless steel S/S with wheels and locking pivots - Dosing head operated pneumatically by Waircom and/or Fesner - Height adjustment device for the dosing head with handwheel - Device for adjusting the quantity of dosed product, via handwheel with markings - 1 height-adjustable worktable - 1 buffer tank, 50 ltr capacity, for temporary storage of pandispan mixture - 1 interchangeable dosing cylinder, 100 mm diameter; adjustable dosing quantity from 78 to 1240 cm³ - 1 end distributor for dosing into moulds with diameter mm=260, equipped with perforated diaphragm for final closure Kdedpfxswxlm To Aayew - 1 pedal limiter for dosing activation or line synchronization - 1 set of nozzles for pandispan dosing - Optional cream decorating unit (see photo/next page) - 1 electrical installation and control panel Main technical specifications: - All parts in contact with the product are stainless steel S/S AISI 316 or other decontaminable materials; frame made of AISI 304 stainless steel and/or food-grade aluminium - Transmissions and gears made of chrome steel. Bearings are enclosed in stainless steel with hermetic sealing - Pneumatic system: Waircom and/or Fesner - Compressor: excluded Operating rate: a) With manual pedal: approx. 5-15 cycles/min b) Automatic mode: 8-15 cycles per minute (adjustable)

Kondisi: baik (bekas), Tahun pembuatan: 2019, PUR fusing system with 20-liter drum feed. Pumping system for use in binding lines in combination with the lamination system. Currently installed in an Alegro (Muller Martini). Kjdjwctp Djpfx Aayodw

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Filling/Dosing Line The filling/dosing line consists of: Ksdpfx Aajwaty Rjyedw 1. Product Pump with Inlet Hopper Brand: Rademaker B.V. Dimensions: 1700 mm x 1100 mm x 2250 mm 2. Dosing Unit Dimensions: 1700 mm x 1100 mm x 2250 mm 3. Conveyor Belt Brand: Meyer Plastic mesh conveyor belt Belt width: 910 mm Overall dimensions: 3400 mm x 1500 mm x 1690 mm Including trolley with additional parts.

Kondisi: bekas, Max. delivery rate: 108.8 ml/stroke, speed: 5-6 strokes/min, capacity: 2x 20 l, with documentation, machine has been barely used. Kodpsw D Dc Defx Aayjdw

Kondisi: bekas, Metering pump, 2-component metering pump Ksdpfx Aaeb A S N Tjysdw - For dosing of liquid media - Dosing capacity: 1.4 l/h - Pressure: 10 bar - Electrical connection: 100-240 V 50/60 Hz - Weight: 3.6 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Das Scheugenpflug Dosiersystem K06399 ist eine eigenständige Dosiermaschine. Die Anlage ist speziell für das Dosieren von DOWSIL 744 aus einem 20-kg-Hobbock ausgelegt. Sie umfasst folgende Achsen: X, Y, Z, Nadel schwenkbar 45°, Träger drehbar mit Hebe-Dreheinheit. Eine Nadelreinigungs- und Messtation ist integriert. Das Bosch-Transportband für die Träger hat eine Breite von 400 mm (nicht verstellbar). Hinweis: Ursprünglich war das Gerät mit Einlauf- und Auslaufpuffern ausgestattet – diese Teile sind jedoch nicht mehr vorhanden. Die Bilder dienen lediglich der Veranschaulichung. Einlauf- und Auslaufpuffer sind nicht mehr vorhanden – diese sind nur zum Verständnis mit abgebildet. / Jahre, in den letzten 2 Jahren aufgrund einer Produktlinienumstellung nicht verwendet. Ksdpfjua Acqex Aayedw

Kondisi: bekas, Tahun pembuatan: 2000, jenis arus masuk: tiga fasa, 1 piece dosing scale for bulk material. Last used for limestone powder. Container: stainless steel. Discharge via screw conveyor. Kdjdpfx Aov T T H Seaysw

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.500 mm, panjang total: 3.000 mm, tinggi total: 2.850 mm, Lotus Chemical Supply Station Kdsdpfx Ajtwy I Isayjw Used equipment, good condition, see pictures Including control system Length: 300 cm Width: 150 cm Height: 285 cm Power: 0.5 kVA Year of manufacture: 10/2007 Already dismantled 3 units available Negotiable price: €2,500 net ex stock Item is in stock. Transport and assembly available upon request. Viewing possible at any time by appointment. Further information on request. Over 5,000 linear meters of pallet racking from various manufacturers always in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our GTCs, all prices excl. VAT ex stock)

Kondisi: bekas, Stainless steel dosing screw, auxiliary screw Kdsdpfsw Abtdjx Aayew Completely stainless steel Screw flight diameter: 150 mm Hopper dimensions: 800 mm x 700 mm x 1100 mm See our other listings VMA Wekerom

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, -Dekumed Unidos 300 TXMP 2K metering and mixing system, Siemens Simatic PLC S7 control, year of manufacture 2016, high-pressure gear pumps for epoxy resin and hardener, 2 stainless steel tanks of 400 L each for epoxy adhesive and hardener, heating jackets for both component tanks, dosing/mixing head, compressor, 70 m cable reel, control cabinet, 4 m swiveling jib, system mounted on steel frame, heavy-duty castors, tow bar. Kdedpfxothdkho Aaysw -Dekumed Unidos 300 TXMP Tr. supply unit for mixing system, year of manufacture 2016 Feed pumps for epoxy resin and hardener, follower plate press for 200 L drums, control cabinet, unit mounted on steel frame with heavy-duty castors. The system was manufactured in 2016, commissioned in 2017, and operated for only 6 months. The unit has been dismantled; original purchase price was €235,000. System is dismantled and prepared for transport; all machine documents and operating manuals are available.

Tahun pembuatan: 2010, Kondisi: bekas, Dosing unit, dosing device, dispenser for dosing system, dosing machine, paint mixing system - Manufacturer: FAST & FLUID, dosing unit Ksdpfx Aaeu Huvloyodw - Condition: unchecked - Type: HA650-16 - Mixing container: 16 canisters - Dimensions: 1300/1300/H1800 mm - Weight: 362 kg

Kondisi: hampir baru (bekas), Automatique Flüssigdosierfüller Automatische Flüssigdosiermaschine für Thermoformer und Siegeltrays. Die Maschine verfügt über insgesamt 6 Füllnadeln. Kodpfx Aajix Nmhjysdw Maschinenabmessungen (LxBxH): 1.250x1.100x1.800 mm

Kondisi: sangat baik (bekas), Dosing filler. Manufacturer - FillFlex. Model - F5500A Capacity - 25L/min. Dosing range from 20ml to 1500ml. Kdedpfevhbcksx Aayew Maximum temperature - 60°C or higher. An additional pump housing is included, as well as a hose pump head for dosing. Various spare parts included. CLH.24

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), A pre-owned dosing bunker with internal dosing belt and internal conveying rake is being offered: Dimensions: Length: 3.90 m, Width: 0.86 m, Height: 1.50 m. Belt width: 0.75 m. Including a matching conveyor belt: Length: 4.20 m, belt width: 0.50 m. In very good condition. Kodpsiuxucsfx Aayjdw Technical details: See photos.

Kondisi: bekas, Filling machine, dosing controller terminal, dosing device, dispenser, pneumatic vacuum control -Manufacturer: Hamatech, dosing device with pneumatic vacuum control Kdsdpot Ulumofx Aayow -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145 mm -Weight: 4.8 kg

Kondisi: bekas, Dosing pump, piston pump, diaphragm pump - Manufacturer: Preci-Pompe, dosing pump with stainless steel tank - Model: PP 31 - Motor: VEM 0.55 kW - Individual components: see photos - Dimensions: 680/440/H620 mm Kdodou Huu Uopfx Aayow - Total weight: 87 kg

Kondisi: bekas, Filling line, filling machine, filling station, tabletop filling machine, filling machine, liquid filling machine, filler, dosing computer terminal -Manufacturer: Hilger u. Kern Dopag, dosing computer terminal -Type: ZM 9310-1-0 -Voltage: 230V 50Hz 1A -Connection cable: see photos -Dimensions: 535/330/H170 mm -Weight: 9.6 kg Kdjdpeumpnbofx Aayew