Beli Dua Syal Ketat Dewasa bekas (10.491)

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Price ex location, loading included! Dkjdpsddmtqjfx Aayju 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baik (bekas), Manufacturer: Takraf / Zemag Rotor diameter: 1,250 mm Dedpfx Aaog Sntyoyjku Roller width: 2,000 mm With drive Currently undergoing overhaul, sandblasting, and painting. For more detailed information, please refer to the PDF below.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Mixer vakum dua poros berbilah untuk daging RISCO RS 200 S V Djdpfx Aaew Iv H Isyoku Merek: RISCO Model: RS 200 S V Tahun produksi: 1988 Kapasitas: 200 liter Dimensi: 1500 × 750 × 1350 mm Mixer vakum industri yang kokoh dari merek Risco, model RS 200 S V, dirancang untuk pencampuran intensif daging dan adonan di bawah tekanan rendah, yang meningkatkan pengikatan protein, struktur, dan warna produk. Dilengkapi dengan dua poros berbilah berputar berlawanan arah, memastikan pencampuran yang merata dan lembut tanpa merusak struktur bahan baku. Konstruksi seluruhnya dari baja tahan karat, disesuaikan untuk digunakan di industri makanan.

Kondisi: bekas, nomor mesin/kendaraan: 007964, Type of attached edging: thin edge, thick edge Dedpfx Aaswu Af Soyoku Adhesive system: EVA Multifunction unit: yes Edgebander: Machine 1 & 2 Working units, right side: 9 units Working units, left side: 9 units

Kondisi: sangat baik (bekas), translation-001 Dkedpfx Ajwz Ic Asayju

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, Double-sided glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of manufacture: 2004 Dsdoiy Dxkjpfx Aayoku With roller table With manual glass positioning Water tank with pump included In very good and clean condition Immediately available

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Dkjdpfsddmtcsx Aayju Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options!

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force 500 t Dedpfxet Hwpys Aaysku Clear width 750 mm Stroke 120 mm Total power requirement 57 kW Machine weight approx. 16 t Space requirement approx. ... m HYDRAP CNC press control and Siemens Simatic S5 control, continuously adjustable workpiece transport unit around the right column, table size 400 x 740 mm, max. installation height 200 mm

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transmission bar (Master & Slave systems) FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Open station EDGE BANDING PROCESSING (for each side): Dsdpfx Aeu Ekbnoaysku Gluing station (hot melt adhesive) 283.205 Edge pressure zone. Edge magazine for rolls (No. 2 fold) End trimming unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min, servomotor) Milling unit 08.055 (KW 0.66 x 2) 0°-30° Multi-function unit (radius milling and profile milling) 08.342 (KW 0.66 x 2) Sprayer unit (for polishing liquid) Open station (for optional addition of a scraper) Buffing unit 08.617 (KW 0.18 x 2)

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack! Dsdeddmq Tspfx Aayoku

Kondisi: bekas, Tahun pembuatan: 1985, Pressing force: 63 t Passage width: 1350 mm Dkodpfxjt Hwxuj Aayeu Stroke: 300 mm Total power requirement: 16 kW Machine weight approx.: 10 t Space requirement approx.: 2.0 x 1.8 x 3.4 m HYDRAP Hydraulic double-column press (embossing press with sliding table) Type: HPDb 63 Year of manufacture: 1985 Serial no.: H 40/5273 Pressing capacity of upper ram: 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without tool changer): approx. 400 mm Stroke speeds up/down / full load: 400/400 or 16 mm/sec Clearance between uprights (front): 1350 mm Clearance between uprights (side): 350 mm Ejector in ram pressure/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx. 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ shuttle table) Accessories / Special equipment Stable double-column frame press with adjustable quadruple prism guides, equipped with: • Hydropneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces, which accommodate the pressed parts and the lower tool, position them under the ram, and after the pressing operation transport them to the rear onto a stacking device. The table then returns to the starting position. This system can be easily removed or modified. • CNC press controller (Siemens S5) with monitor for input of all relevant process data or for saving tooling data, allowing for easier and faster machine setup and for monitoring part transport. Shuttle table holder. • SICK light barriers fitted at the front press area/ loading station. • The ram is equipped with an electromechanical depth stop (300 mm stroke) and hydraulic tool clamping device, as well as integrated hydraulic ejector. • Displays for pressure and oil temperature, part counter, foot switch, two-hand release, central lubrication, hydraulic oil flow cooling, free-standing electrical cabinet, etc. The machine was used for pressing edge trims on cylinder head gaskets. Condition: Good to very good – demonstration ready, under power Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Dksdeifnxxopfx Aaysu Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINES – First (1st) machine in a line Edge material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: approx. 230 / 1600 Control / Software: WinEdge Feed speed (variable) m/min: approx. 10 - 30 Protective and soundproof cabins FORMATTING UNITS (per side): No. 2 hogging units (2 x approx. 5.8 kW) No. 2 jointing-milling units aft (2 x approx. 4 kW) EDGE BANDING SECTION (per side): Gluing unit (hot melt glue + pre-melter) Pressure zone (CNC-controlled) Dsdel Hydmspfx Aayjku Magazine for edge rolls (number of slots): 6 Pre-milling unit 08.055 (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW, 0°-30°) No. 5 universal milling units for grooving, rebating, and profiling (5 x approx. 4 kW) Profile scraper unit Flat scraper unit Spraying unit (for polishing fluid) Buffing unit + hot air blower – edge finishing

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a machine line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (the panels fall directly onto the motorized chain conveyors) Cam interval (mm): 270 FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Protection cutter (pre-milling) 75.186 (1 x kW 4.4) Milling unit (2 x kW 6.6) Free position Djdpjum Untefx Aayeku EDGE PROCESSING (for each side): Edgebanding unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 0.66) 30 m/min Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-2 (2 x kW 0.18) Free position

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge material (thickness, min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Protective and soundproof cabins Djdsunrwnopfx Aayoku FORMATTING UNIT (each side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (slot no.): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°-30° Milling unit 08.055 (2 x 0.66 kW) 0°-30° Profile scraping unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving/rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°-180°

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness with rolls (min/max) mm: 0.3 - 3 Edge thickness with lippings/strips (min/max) optional: mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and soundproof enclosure Dkodsk Nk R Djpfx Aayju Cam spacing (mm): 500 FORMATTING UNIT (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Cutting unit (2 x approx. 5.8 kW) Universal milling unit 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (No. 2 positions) + edge pressing zone End trimming unit (2 x 0.35 kW approx.) Pre-milling unit (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx.) 0°-30° Multi-functional unit (radius milling and contour milling aggregate) with 2 revolvers (8+8 positions) - max 27 m/min Universal routing unit for grooving/rebating and profiling 1 x approx. 4 kW (0° - 90°) Profile scraper unit + flat scraper unit + buffing unit

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 240 / 2500 Dkjdpfxelikydj Aaysu Control system: PC 22 Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (per side): Pre-milling cutter (trimming) 1 x 4.5 kW (hydro) Milling unit KD 11 (2 x 8.1 kW) hydro EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot No. 6) Edge pressure zone "C" Pre-milling unit 2 x 0.55 kW Milling unit MF 20 (2 x 0.55 kW) 20° Profile scraping unit PN 20 Finishing unit (flat scraper + buffing unit) FA 11 Free slot

Kondisi: sangat baik (bekas), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 14 / 60 Working width (min/max) mm: 260 (approx.) / 3200 Control/Software: MAESTRO PRO EDGE Feed speed (adjustable) m/min: 10 – 40 Safety and noise protection cabin + cam pitch (mm): 400 FORMATTING UNIT (per side): - Protective pre-milling cutter AS (1 x 4 kW) - Chopping mill DTR (2 x 8 kW) - Spraying unit (for liquid non-stick) AAR EDGE BANDING SECTION (per side): - Preheating unit for edge workpiece - Gluing unit (Hot Melt + pre-melter) - Pressure zone (CNC-controlled) - Edge magazine for rolls (2 positions) motorized - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP - Multi-profile milling unit (CNC-controlled) RI/S 2P - Profile copying milling unit (tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM with Fast-Release - Profile scraping unit RAS/S Dedpfjwhi Slox Aayeku - Flat scraping unit RCA/2C - Spraying unit (for polishing liquid) - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Dkodpfjl Hycwox Aayou Portal-type machine, part of the line (SOFIT code: J10039) Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (guides the sliding carriage) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction pads No. 2 external roller conveyors (at floor level) for infeed of panel stacks to the feeding station No. 1 external motorized roller conveyor (receives panels) from the feeding station Separate electrical control cabinet Electronic PLC control system, MAGELIS Full perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 10 Panel thickness (min/max) mm 10 - 60 (approx.) Min. panel dimensions mm 210 x 230 (approx.) Max. panel dimensions mm 1200 x 3200 (approx.) Total connected load kW

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in-line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Dkodpsu Tg Uqofx Aaysu Cam interval (mm): 500 FORMATTING UNIT (for each side): Protection cutter (pre-milling) AS 10 (5.8 kW) 2 x Hoggers DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) Edge pressure section (CNC controlled). Edge magazine for rolls (6-fold) Trimming unit IT 90-S (0.3 kW x 2) 28m/min. 0 – 25°. PNEUMATIC CNC controlled multi-profile milling unit RF 30 (0.65 kW x 2) 0 – 25° Multi-function unit (radius and contour milling unit) AR 80 (0.3 kW x 2) 25 m/min – ROTAX Spindles with automatic tool change (tools with 8+8 positions) CNC controlled multi-profile scraping unit RB 30 Flat scraping unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for boards (useful height mm 80) as buffer to accelerate the working cycle

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for stack discharge from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Dkedpfxewbp Nwj Aayeu Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (roll) (min/max): 0.3 - 3 mm - Workpiece thickness (panel) min./max.: 12-40 mm - Working width (min./max.): 250-2500 mm - PC control: PC22 - Top pressure system with driven rubber belts - Adjustable feed fence: 10-32 m/min - Liquid glue unit - Jointing milling unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt adhesive unit A3 - Pressure zone C (manual adjustment) "A" - Roll holder for 2 rolls - End trimming unit: HL 84 (2x 0.22 kW at 12000 rpm) - Pre-milling unit (2x 0.4 kW at 12000 rpm) Dkedpfx Aowk Hp Tjayeu - Finishing unit (scraper blade unit + buffing unit): FA11 - Polishing unit

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable alignment stops, spacing (mm): 1000 EDGE PROCESSING (for each side): Protective cutter (pre-milling) (1 x kW 4.5) Chip breaker KD 11 (2 x kW 6.6) Jointing milling unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (for each side): Gluing unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Djdpfx Aouhv R Dsaysku Edge magazine for rolls (slot No. 2) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spraying unit (for polishing liquid) No. 2 Universal milling units for grooving/rabbetting and profiling SF20 (2 x kW 6.6) Powered panel infeed roller conveyor with singulation system "HOMAG" Mod. POWER TBL 100/20/25

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Dkjdpfx Aaeu Rc Anoysu Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) Dkjdpsu Rc Hyefx Aayou No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)