Beli Ekstraksi Swarf bekas (1.310)

Kondisi: baik (bekas), Radial fan, dust extraction blower, fan, extraction unit, dust blower, blower, exhaust fan, low-pressure radial fan -Manufacturer: Dietz, Low-Pressure Radial Fan Type DN 14 -Motor: Dietz 0.45 kW 2880 rpm -Volumetric flow rate: 19 m³/min Iedpfx Aaeuncwxe Njht -Connection: Inlet Ø 130 mm -Connection: Outlet 110 x 110 mm -Protection class: IP56 -Dimensions: 380/300/H295 mm -Weight: 15.4 kg

Kondisi: bekas, Radial fan, dust extraction blower, fan, extraction unit, dust blower, welding fume extraction - Motor power: 0.37 kW - Speed: 2800 rpm - Inlet connection: Ø 115 mm - Outlet connection: Ø 115 mm - Impeller: Ø 300 mm - Connection: 400 Volt Ihodpfx Aaecucu Is Net - Dimensions: 400/600/H450 mm - Weight: 21 kg

Kondisi: baik (bekas), Radialventilator, Staubabsauggebläse, Ventilator, Absaugung, Staubgebläse -Motorleistung: 3,6 kW -Drehzahl: 1440 U/min -Volumenstrom: m³/h -Anschluss Eingang: Ø 450 mm -Anschluss Ausgang: Ø 450 mm -Flügelrad: Ø 670 mm -Anzahl: 1x vorhanden -Abmessungen: 1200/1100/H1350 mm -Gewicht: 242 kg Ihsdpfsb Ilxdsx Aa Not

Kondisi: bekas, Tahun pembuatan: 1991, Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Novenco, dust extraction blower radial fan type CNA-400 REX / AZG-S -Motor: 1.35 kW, 955 rpm -Volumetric flow: 5,000 m³/h -Connection: Inlet Ø 400 mm -Connection: Outlet 390 x 280 mm -Dimensions: 1030/590/H800 mm Ihodotz Hu Ijpfx Aa Net -Weight: 70 kg

Kondisi: baik (bekas), Tahun pembuatan: 1998, Dust extraction blower, extraction unit, dust blower, extraction system, dust extraction unit, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction blower, filtration system, cartridge dust collector -Manufacturer: BTR Environmental, Unicell cartridge dust collector -Type: C16-2K7 -Extraction blower power: 3.0 kW -Inlet: Ø 220 mm -Individual components: see photos Ihodpfeu Uww Ssx Aa Njt -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg

Kondisi: baik (bekas), Radial fan, centrifugal fan, radial blower, chip extraction blower, fan, extraction system, chip blower, high-performance fan, metal chip extraction blower - Centrifugal fan: Metal chip extraction blower with wear plates - Motor: VEM K11R 160 MX2 - Motor power: 15 kW / 2920 rpm - Airflow rate: m³/min / m³/h Isdpjvt R Akjfx Aa Njht - Inlet connection: Ø 160 mm - Outlet connection: 150 x 130 mm - Base plate: 580 x 520 mm - Overall dimensions: 990/810/H1055 mm - Weight: 365 kg.

Kondisi: bekas, Radial fan, dust extraction blower, ventilator, extraction unit, dust blower, blower, exhaust air fan -Dust extraction blower: centrifugal fan -Motor: Loher 7.5 kW, 1445 rpm Ihedst Hy Ufspfx Aa Net -Airflow: m³/h -Quantity: 2x fans available -Price: per unit -Dimensions: 895/895/H865 mm -Weight: 171 kg/unit.

Kondisi: bekas, MIG/MAG torch package, MIG/MAG welding torch, robot welding torch package, intermediate hose package, robotic torch package, welding fume extraction, fume extraction torch Isdpfxet U Trye Aa Nsht - MIG/MAG torch package: with welding fume extraction - Length: 4.25 m - Water-cooled - Transport dimensions: 600/500/H130 mm - Weight: 4.8 kg

Kondisi: bekas, Radial fan, high-pressure centrifugal fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction unit, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, centrifugal blower Iodet E D Hiopfx Aa Noht - Manufacturer: ebm, centrifugal extraction blower - Model: 2CF2062-OEA - Motor power: 0.18 kW / 2740 rpm - Inlet connection: Ø 62 mm - Outlet connection: Ø 63 mm - Impeller: Ø 240 x 30 mm - Protection class: IP 54 - Dimensions: 340/300/H355 mm - Weight: 8.8 kg

Tahun pembuatan: 2000, Kondisi: bekas, Radial fan, dust extraction blower, fan, extraction, dust blower -Manufacturer: Rippert, radial fan in soundproof enclosure -Type: HL560/710-200 -Motor: 5 kW, 1435 rpm -Airflow rate: 12,000 m³/h -Inlet/outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg Isdelzmylopfx Aa Njht

Tahun pembuatan: 2003, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Pabrikan: HERBOLD Model: CS450/600-2A Dimensi rotor / ruang giling: 450 x 600 mm Jumlah pisau rotor: 5 Jumlah pisau stator: 2 Daya motor penggerak: 22 kW Pisau cadangan 3 buah Saringan tambahan 5 buah Perlengkapan: Pengeluaran hasil gilingan + silo Mesin giling ini dilengkapi dengan tiga opsi tambahan untuk pemasukan material (berbagai desain)!!! Iodoxl R Imopfx Aa Nsht

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 45 kg, tegangan masuk: 230 V, lebar total: 4.064 mm, panjang total: 7.366 mm, tinggi total: 6.604 mm, luas filter: 5 m², kapasitas hisap: 180 m³/jam, penekanan: 36.000 Pa, daya: 1,5 kW (2,04 hp), The device has seen minimal use and is in excellent condition, fully operational. Iedpjvpgkcefx Aa Nsht Specifications The ClearO2 W100 is designed as a supplement to the 8XE MIG and 8XR MIG Cobot extraction units from Translas. By combining the welding fume torches of the 8XE MIG and 8XR MIG Cobot extraction units with the ClearO2 W100 units, between 90% and 98% of welding fumes are captured at the source and filtered with an efficiency of >IFA 99.8%. The compact unit, weighing only 45 kg, features four wheels—two of which are lockable—making it perfectly suited for easy relocation around the workplace. Automatic Cleaning The ClearO2 W100 features an automatic cleaning system using a reverse compressed air pulse. When the vacuum level in the filter becomes too high, the unit automatically initiates filter cleaning. A manual cleaning function can also be triggered with the push of a single button. An automatic start/stop function—standard on all ClearO2 units—saves energy and synchronizes operation with the 8XE MIG and 8XR MIG Cobot extraction units. As soon as the torch is removed from its specially designed holder, the machine begins operation automatically. Continuous Duty Motor The device’s electric motor is engineered for continuous operation without loss of performance. Thanks to the automatic cleaning function and a simplified motor system, maintenance requirements are minimal, making the unit durable and time-saving. With a filter surface area of 5 m², it is among the most efficient units of its class, featuring the largest filter. The filter is disposable and provides an active surface with an efficiency rating of IFA >99.8%. Lightweight and Mobile The ClearO2 W100 units are designed to meet the needs of welders who must frequently change their workstation. Typical applications include shipbuilding, wind tower construction, tank fabrication, and other similar manufacturing industries. Thanks to its four wheels (two with locking brakes) and light weight—only 45 kg—the unit can be easily moved to the next workstation. [Source: translas]

Kondisi: baru, Airtower FT 20,000 model designation Ihsdpfx Ajgvqzcsa Njt

Kondisi: baru, Flow rate 1600 m3/h Separation efficiency 99.9 % Length extraction hose 3,000 mm Motor 230 Volt Motor output 1.1 kW Weight 80.0 kg Dimensions (L-W-H) 580 x 580 x 900 mm Description: The newly developed filter unit 'filtoo' by TEKA is a mobile filtration system suitable for a wide range of applications involving the extraction and filtration of fumes, dust, and gases. It is also suitable for use with high-alloy steels (stainless steel). (The unit is tested in accordance with DIN EN ISO 15012-1 (2005) and IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation rate: > 99.9%)). Iedpexaal Rjfx Aa Njht Where can the SIG 230 filtoo be used? - At welding workstations - In workshops - For soldering applications - By restorers - In metalworking shops Features: - BGIA-certified extraction and filtration system IFA 1005030 for extraction of fumes from high-alloy steels & non-ferrous metals - Operating manual in German Optional equipment at extra cost (recommended): - Retrofit kit STAVO (pre-separation of dust) - For FILTOO with spark protection and collection drawer Note: - The device is only intended for extracting dry dust and fumes - Please read the operating manual before initial commissioning

Kondisi: baik (bekas), Tahun pembuatan: 2019, Penawaran 25472 Data teknis: - model bergerak - kelas IFA W3 Ihsdeyaapqepfx Aa Nst - kaset filter sekali pakai - kelas filter E 12 - tingkat pemisahan 99,5% - model bergerak dengan lengan ekstraksi sendi 4000 mm - aliran udara sekitar 1100 m³/jam - tekanan statis maksimum 1350 Pa - luas permukaan filter sekitar 17,2 m² - penggerak – kipas 400 V / 1,1 kW - kebutuhan ruang sekitar P 800 x T 1800 x L 850 mm - berat sekitar 100 kg

Kondisi: bekas, Tahun pembuatan: 2006, de-hu-it-lt-001 Iedpfx Aaswnh Urj Njht

Kondisi: bekas, Tahun pembuatan: 2025, Filtration unit, immediately available! BRAND NEW, in original packaging! 1.1. STfp-rFan DER4 450/550/18.5-2 | incl. backdraft damperExtraction fan, "DER4" series for clean air side installation, single-sided suction, direct drive. Key construction features: Spiral housing made of galvanized sheet steel, pre-configured for horizontal installation in MultiStar series filters, IEC-standard motor, high-performance impeller with backward-curved blades, designed for clean air extraction operation. Suction nozzle with spark guard. Impeller welded from steel, statically and dynamically balanced. For explosion protection reasons, the fan is not suitable for conveying explosive dust/air mixtures! Technical data and performance: Airflow volume (max. permissible): 15,000 m³/h Total pressure increase: 3,000 Pa Inlet nozzle: 450 mm diameter Outlet nozzle: 450 mm x 355 mm Drive motor: 18.50 kW, 3,000 rpm at 50 Hz | 3,600 rpm at 60 Hz Voltage / frequency: 400 V, 50 Hz Motor efficiency class: IE3, Premium Efficiency Weight, approx.: 330 kg Direction of rotation: RD 0 1.1.1. STCold conductor 18.5 kW 1.2. STMultiStar VR 6.6-195.25317AMultiStar modular filter unit with vibration cleaning for installation outside potentially explosive areas. Construction features: Galvanized, self-supporting sheet steel construction. Pressure surge resistance 200 mbar (type-tested, Dekra-Exam 342863200a-23ExA-Sip). Housing vacuum resistance max. 5,500 Pa (pulsed loads must be avoided). EU type-tested rupture discs. Weather protection cladding for the filter section with inspection door(s) and the required number of exhaust air connections (depending on air volume). Fire resistance EW 90ef, MPA-tested. Clean air connection as per project drawing. BG-tested needle felt filter material, suitable for wood and paper dust as well as many other dust types. Filter bags externally loaded, with reusable internal support elements. Filter cleaning takes place during operation breaks. Expansion chamber for pre-separation. The permissible fill height of the expansion chamber depends heavily on the material properties (bulk density, grain size, tendency to bridge formation, etc.) and is approx. 400...700 mm. Inspection door with viewing window and limit switch. Connection shaft for rotary valve, etc. Technical data and dimensions: Filter area: 195 m² Filter bags: 144 pcs Filter bag length: 2,530 mm Bag diameter: 170 mm Vibration motor: 0.18 kW, 400 V, 50 Hz - 1 pc. Agitator drive: 1.50 kW, 400 V, 50 Hz Footprint, L x W: 2,880 mm x 2,880 mm Space requirement, L x W: As per system drawing Height: 9,110 mm. Additionally included: Dry fire line, consisting of: o C-hose connection with blind coupling *) o Riser pipe from filter bottom edge o Distributor pipe system with extinguishing nozzles o Warning sign Note: According to DIN EN 12779:2016, sec. 5.4.2.3 the water connection must be located 0.4 m to 0.8 m above floor level and, in the event of fire, must be safely and easily accessible for connecting a fire hose. BGHM additionally recommends installing a dirt trap in the riser pipe. The necessary components, installation materials and labor hours for this are not included in the base price of the dry fire line. These must either be provided on-site or custom fabricated with special height = 3,000 mm. The sub-frame is not included in the scope of supply and will be specified and supplied separately. 1.2.3. STadditional S Ihedpfjx U Egrex Aa Nst

Kondisi: bekas, Tahun pembuatan: 2010, en-GB-001 Ihjdpju Nun Hofx Aa Net

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Voltage: 400 V / Hz Total power requirement: 0.37 kW Machine dimensions (LxWxH): L: 2.7 x W: 0.7 x H: 2.0 m Scraper belt conveyor combined with coolant system and torque cut-off Discharge length D = 280 mm Chip entry width F = 325 mm Insertion height B = approx. 160 mm Insertion height B+I = 220 mm Ijdpfx Aaov N Ekbe Nsht Chip entry width F1 = 300 mm Chip entry length = 700 mm Ground clearance I = 60 mm Discharge height above floor C+I = 950 mm Features: 2x support feet *

Kondisi: bekas, Tahun pembuatan: 2013, en-GB: Technical details: Belt width: 600 mm Voltage: 460 V / 60 Hz Total power requirement: 3.5 kW Machine weight approx.: 2,300 kg Machine dimensions approx. (LxWxH): approx. 9.0 x 1.4 x 3.0 m Hinged belt conveyor, unused With coolant tank including submersible centrifugal pump (delivery rate: 250 l/min, sufficient for a delivery height of 25 m) Chip infeed length (A): max. 3,000 mm (extension with sheet steel trough and rubber lining, 3,000 x 1,100 mm) Total insertion length: 5,000 mm Belt width (H): 600 mm Discharge height (C) above floor level: 1,800 mm The chip conveyor features four swivelling castors underneath and can be fixed to the floor with anchor bolts. Iedpfx Aaou Nupde Noht *

Kondisi: bekas, Tahun pembuatan: 2007, Technical details: Conveying height: C = 900 mm Total power requirement: 2.8 kW Machine dimensions approx. L x W x H: approx. 8.4 x 2.1 x 1.3 m Hinged belt conveyor Iedpfx Aaou Nup Ro Noht Very good, lightly used condition. Coolant tank: 1300 x 2050 x 260 mm Discharge length D = 500 mm Total chip infeed length approx. A = 4120 mm with sheet metal tray extension with rubber coating, width 230 mm each, left/right (including chip infeed extension approx. 1720 mm, covered with profile sheet) Chip infeed width F = 620 mm Insertion height B = approx. 380 mm The chip conveyor is equipped with 3 swiveling casters underneath and can be anchored to the floor using bolt screws.

Kondisi: bekas, Tahun pembuatan: 2013, Technical details: Machine weight approx.: 300 kg Ihedpfxeu Nv Afs Aa Njt Electrical configuration - Voltage/Frequency: 400 / 50 at 3~ V/Hz Power consumption: 750 watts Dimensions L x W x H: 1.5 x 0.8 x 2.6 m Mobile compact extraction unit with extraction arm (welding fume extraction and smoke filtration). Field of application: Suitable for a wide range of fume and dust applications (MIG/MAG solid wire). Includes extraction hood by manufacturer Lincoln, type LFA 4.1 CPL, year 2013; pipe diameter 200 mm; intake diameter 280 mm; total length = 3900 mm; the head is equipped with lighting via light switch, manual rotary handle for shut-off damper, ON/OFF switch. Gas temperature 40°C / 100°F Extraction capacity approx. 2000 m³/h Mobile on 4 wheels, front wheels braked.

Kondisi: bekas, Tahun pembuatan: 1993, Technical details: Motor power: 7.5 kW Speed: 2,860 rpm Extraction nozzle diameter: 200 mm Electrical configuration - Voltage/Frequency: 380 V/Hz Approx. machine weight: 235 kg Approx. machine dimensions (LxWxH): 1.0 x 1.0 x 1.65 m DUST EXTRACTION UNIT - Impeller housing Ø=600x160mm - Impeller = 360mm Inlet: - Conical inlet nozzle Ø=250x200x200mm - Flange Ø=250mm Ihodpfeu Nu Exox Aa Net Exhaust outlet: - Ø=250mm; Flange Ø=310mm Accessories: - 3x wall clamp Ø=140mm - 90° bend Ø=250x600mm 1x replacement V-belt 15x1500mm Sale without test run! Offered at the listed price!

Kondisi: bekas, Tahun pembuatan: 1998, Technical details: Total power requirement: 3.3 kW Volume flow: n/a m³/h Rated current: 14 - 15 / 8 - 8.5 A Filter: Size approx. W: 660 x D: 1000 x H: 1060 mm Motor power: 3.3 kW Machine weight approx.: 600 kg Dimensions (L x W x H): 1.45 x 0.8 x 2.0 m Dry separator with fan is sold as is. Constructed from sheet steel Filter surface: VARIO T 1.5 f = 50 Hz Filter: 6 filter elements; dust removal via container Ø 300 x H: 380 mm Fan: Suction port Ø 250 mm; connection value 380 V Ihjdpfevdczaox Aa Not Exhaust opening via ceiling External control (was connected to a Trumpf laser cutting system) *

Kondisi: bekas, Technical details: Isdpfou Nuqhox Aa Noht Belt width: F1 = 350 mm Conveying height: C = 1200 mm Machine weight approximately: 1050 kg Machine dimensions approx. LxWxH: approx. G 5.25 x 1.2 x 1.6 m Total power requirement: 2.5 kW Hinged Belt Conveyor This chip conveyor is mobile thanks to its three pivoting wheels. It can be fixed to the floor using the four adjustment screws. Chip Inlet: open (not covered) L: 880 x W: 500 mm; Total inlet approx. 2000 mm x 480 mm (including cover) Insertion data: A 2,500 x F 530 x W 350 mm Coolant tank: 600 x 1200 x 200 mm with pump and two level sensors Very good, lightly used condition.