Beli Emag Vl 5 bekas (137)

Kondisi: bekas, Tahun pembuatan: 2021, Swing diameter 400 mm Turning height 300 mm Max. rotating diameter 520 mm Workpiece weight 60 kg X-axis travel 995 mm Y-axis travel +/-30 mm Z-axis travel 580 mm Max. chuck diameter 500 mm Max. tool drive speed 6,000 rpm Main spindle drive power 37 kW 12-position tool turret BMT75 Kedex H Aibjpfx Aa Nodg Total power required 55 kW Machine weight approx. 13.5 t Rotary workpiece transport system, O-version Drag frame system for 10 workpieces Coolant supply: 15 bar Coolant pump capacity approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. Spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filtration rating 100 µm, with electric and mechanical contamination indicators Chip conveyor Hinged belt design: rear discharge Chip ejection height 1,100 mm (with integrated coolant tank, approx. 500 l capacity) Emulsion mist extraction: extraction capacity approx. 800 m³/h Rinsing gun Workpiece measurement with probe Probe air purge Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA Axial drilling-milling head – BMT75 CC 5x right-angle drilling-milling heads 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic power chuck cylinder Size 150 - with 1 media supply Max. clamping force 10,850 daN at 70 bar Coolant-through spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick change Max. speed = 2,200 min-1 (reference speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Rinsing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 finishing external tool 1x 8.BMT25VL8IKX50 roughing external tool 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 thread tapping holder 1x 40.75V5KRVL8IKD face milling cutter 50 mm 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 drill 20 mm diameter 1x 42.V522L08Ik drill 22 mm diameter 1x 27.V514WNL31 drill 14 mm diameter Software package Operating/maintenance manual

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Offered is a vertical turning and grinding center EMAG VSC 250 DS. The machine is mechanically overhauled and rebuilt by EMAG. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, flip-over device) and additional peripherals such as chip conveyors, coolant systems, etc. CONTROL SYSTEM Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-axis travel: 860 mm Z-axis travel: 200 mm Kodpfjh Tkdqox Aa Nsdg MAIN SPINDLE Power: 28 kW TOOL CARRIER EMAG disc-type turret, 12x VDI 40 Console with grinding spindle 18 kW, 45,000 rpm Delivery time and additional machine configuration to be agreed upon.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Panel kontrol untuk EMAG VTC315DS Dikemas asli, dari stok gudang dengan dokumen dan disket perangkat lunak Nomor pesanan EMAG: 20026865 Kdjdpfx Aexz Axvea Neg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Dikemas asli, dari stok gudang Nomor pesanan asli EMAG: 20567652 Kodpfx Aoxzzhvsa Nedg

Kondisi: baik (bekas), Tahun pembuatan: 2016, vlc100-de-hu-20240615 Kdodpfxonmywks Aa Njg

Kondisi: bekas, Tahun pembuatan: 2012, Turning diameter 140 mm Turning length 630 mm Control Siemens 840 SL max. swing diameter over bed 250 mm Spindle speed range - main spindle 0 - 5000 rpm Max. torque 256 Nm Spindle bearing diameter 110 mm Spindle bore 52 mm Spindle nose size 6 DIN 55026 Chuck diameter max. 250 mm Number of tool stations 3 x 12 positions Tool holder VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm X-axis travel 300 mm Z-axis travel 740 mm Rapid traverse x 45 / z 30 m/min Total power requirement 70 kW Machine weight approx. 25.0 t Space requirement approx. 6.5 x 3.5 x 4.4 m In our assessment, the machine is in good used condition and can be inspected under power by prior appointment. Technical features: - Siemens S120 drive systems - 3x turrets, all stations AGW, 2x with Y-axis - 2x main spindles, 1x with tailstock - Total number of spindles: 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accessories: - Chip conveyor Kdsdexqrgzjpfx Aa Njg - Wireless probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - Extraction unit Two identical machines are available. Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in the technical data and information as well as prior sale reserved!

Kondisi: bekas, Tahun pembuatan: 2014, VL2-DE-001 Ksdpfx Ajqvd Iuja Njdg

Kondisi: bekas, Tahun pembuatan: 2014, max. diameter putar 160 mm max. tinggi putar 150 mm diameter benda kerja maks. 100 mm tinggi benda kerja maks. 150 mm kecepatan putar maks. 6.000 rpm perjalanan - x 700 mm perjalanan - z 375 mm sumbu-c 360 ° Kontrol FANUC Kdjdpoqvd Iqsfx Aa Njg Mesin bubut vertikal | EMAG - VL2 dilengkapi dengan ban keliling benda kerja. Mesin dalam kondisi sangat terawat. Harap dicatat bahwa detail teknis diambil dari mesin sejenis.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 67.343 h, Fungsionalitas: berfungsi sepenuhnya, Semua data akan diberikan atas permintaan pada iklan ini. Mesinnya kotor. Hingga Juli, mesin ini memberikan toleransi terbaik di MAGNA POWERTRAIN dan selain itu dalam kondisi sepenuhnya berfungsi. Kedpsxl Ah Sefx Aa Njdg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 72.284 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 685 mm, panjang umpan sumbu Z: 200 mm, jarak pergerakan sumbu X: 685 mm, jarak gerak sumbu Z: 200 mm, diameter luar chuck: 250 mm, gerak cepat sumbu X: 45 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang total: 3.100 mm, tinggi total: 2.650 mm, lebar total: 4.000 mm, kecepatan rotasi (maks.): 6.000 rpm, torsi: 460 Nm, berat keseluruhan: 7.800 kg, model controller: Siemens 840D, jenis kontrol: Kontrol CNC, Perlengkapan: unit pendingin, For sale: EMAG VSC250, year of manufacture 2008. Equipped with Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated part transfer unit - Stamping unit - Chip conveyor (left-side discharge) - Coolant system - Tool turret 12x VDI40 Kdjdpjw Dyqdsfx Aa Nog The machine is under power and can be inspected on site.

Kondisi: baik (bekas), Tahun pembuatan: 2013, f824d916 Kdedpfx Aasw Inr Ne Nsg

Kondisi: bekas, Tahun pembuatan: 2004, Max. turning diameter 250 mm Turning length 100 mm Control system SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7,500 kg Space requirement approx. [to be filled in] E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece loading system Model VSC 250 DS Year 2004 # M7 28.69324 Max. turning diameter 250 mm Turning length inside/outside approx. 100 mm Workpiece length min./max. 29 – 100 mm 6-station tool turret Ø or swing diameter 480/790 mm Slide travel X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm Feed / rapid traverse X/Z 45 / 30 m / min Feed force X/Z 5.5 / 11 kN Spindle speeds 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight 7,500 kg Accessories / Special equipment • CNC path control SIEMENS 840 D with color display, graphics, menu-guided dialog programming and all standard options, cycles, and subprograms, etc. • 6-position hexagonal tool turret with 6 tool stations (Ø 40), without motorized drive, but functioning as a swiveling axis (B-axis), double bearing and with directional logic • 2 GMN grinding spindles mounted at turret positions T3 and T6, speeds approx. 42,000 rpm and 18,000 rpm, equipped with one CBN wheel and one ceramic pin Kdedpfx Ast Hxa Toa Neg • Workpiece loading system with circulating carrier frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device at the workpiece change station for rough and finish measurements • NORGREN air gap measuring system (?), hydraulic weight compensation for the main spindle • SMW Autobloc 3-jaw diaphragm chuck (for simplified loading of billet parts) approx. Ø 250 mm, with clamping monitoring • HYFRA recooling unit for cooling the main spindle and thermal stabilization of the machine body, advanced SEITZ paper band filter system, retractable chip conveyor, coolant chiller for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Vertical CNC lathes provide a thermally stable design (chips do not fall onto the machine bed), quick workpiece change times (pick-up system via main spindle), and a rigid tool setup that also enables non-standard machining processes. In this application, hardened gears were hard-turned and ground. Condition : Good – ready for demonstration shortly Delivery : Ex stock – as inspected Payment : strictly net – upon receipt of invoice

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 101331, jarak pergerakan sumbu X: 300 mm, jarak gerak sumbu Z: 700 mm, kecepatan spindel (maks.): 5.000 rpm, diameter pembubutan: 140 mm, panjang pembubutan: 630 mm, TECHNICAL DETAILS Maximum turning diameter: 140 mm Swing diameter over chuck: Ø 250 mm Turning height: 630 mm CNC control: SIN840 PL Spindle Spindle speeds: stepless 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter (front bearing): 110 mm Axes X-axis travel: 300 mm Feed rate X-axis: 1 - 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Feed force X-axis: 9,000 N Z-axis travel: 700 mm Ksdpfx Aoxf An Soa Nodg Feed rate Z-axis: 1 - 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min Feed force Z-axis: 10,000 N Tool Turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Footprint (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - HYFRA spindle cooling unit - Knoll coolant system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak gerak sumbu Z: 700 mm, diameter pembubutan: 140 mm, tinggi pembubutan: 380 mm, diameter pembubutan di atas alas geser: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel path X-axis: 300 mm Travel path Z-axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle diameter at front bearing: 110 mm Kdedpfxjxf A Npe Aa Neg Feed & Rapid traverse Feed rate X-axis: 1 - 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Feed force X-axis: 9,000 N Feed rate Z-axis: 1 - 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min Feed force Z-axis: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Tool holder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirement: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Inlet and outlet Reversing gripper

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Turning diameter: 140 mm Swing diameter: 200 mm Turning height: 630 mm Kdjdpfovvcibox Aa Njg Control system: Siemens 840 S Centre distance: 832.5 mm Turning length: 380 mm Spindle nose size: 6 Spindle diameter at front bearing: 110 mm Bed slides: 2 Number of cross slides: 2 Turret VDI 40 Number of tool stations: 11 Total power requirement: 70 kW Machine weight approx.: 22 t Space required approx.: 5.8 x 8.6 x 3.8 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Working area Chuck diameter 160 mm Maximum weight 86* kg Swing diameter 200 mm X-axis travel (working stroke) 380 mm Z-axis travel 660 mm Loading time (depends on clamping device) 1 – 2 sec. Main spindle 2 units Spindle flange according to DIN 55026 size 5 Spindle bearing – Ø front 80 mm Kedpfsvz S Siex Aa Nedg Maximum speed 6000 rev/min Main drive, see description 2 units Feed drive Rapid traverse speed, X 60 m/min Rapid traverse speed, Z 60 m/min Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Turret, see description Electronic equipment according to VDE 0113 Operating voltage 400 V Control voltage – DC 24 V – AC 230 V Frequency 50 Hz Connected load Connected power without loader 36 kW Connected power with loader 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and Weight Depth 2800 mm Depth incl. chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Kondisi: bekas, Tahun pembuatan: 2001, Offered here is a vertical pick-up lathe EMAG VSC 250, manufactured in 2001. The machine is equipped with a circular conveyor belt that passes through the machine. Loading of the automation belt takes place at the front side of the machine. The working area features a work spindle and a turret with 12 tool positions. Additional accessories such as chip conveyor, coolant systems or decentralized extraction unit are not included in the scope of this listing. The machine was taken out of service several years ago. After inspection, the VSC 250 is found to be fully functional and is being sold in good condition, as can be seen in the pictures. Kedpfetrwdtox Aa Nsdg The machine has been completely cleaned and newly painted. All electrical cabinet components and cables are still in their original condition. CONTROL Siemens Powerline TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece height: max. 150 mm Swing diameter: 250 mm X-axis travel: 685 mm Z-axis travel: 200 mm MAIN SPINDLE Power: 28 kW Speed: max. 6,000 rpm TOOL CARRIER 1x disc turret, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time to be agreed upon.

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2841823, Maximum workpiece diameter: 250 mm Kdedpfjv U Emtox Aa Nog Maximum workpiece length: 175 mm Maximum chuck diameter: 315 mm Axis travels: X-axis: 860 mm Z-axis: 200 mm Rapid traverse: X-axis: 45 m/min Z-axis: 30 m/min Main spindle speed: up to 4500 rpm Main spindle power: 28 kW Control system: SIEMENS SINUMERIK 840Dsl Tool turret: 12 positions Maximum workpiece weight: 6 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Używana tokarka pionowa CNC EMAG VSC 250 (rok produkcji 2011) – Wysoka precyzja i automatyzacja Oferujemy na sprzedaż używaną tokarkę pionową CNC EMAG VSC 250 z roku produkcji 2011. Maszyna przeznaczona jest do wydajnych i precyzyjnych operacji toczenia, szczególnie dla detali o masie do ok. 6 kg. Dzięki pionowej konstrukcji oraz zaawansowanej automatyzacji, maszyna idealnie nadaje się do produkcji średnio- i wieloseryjnej, gwarantując wysoką wydajność oraz powtarzalność procesów. Najważniejsze cechy i możliwości: • Konstrukcja pionowa: Optymalne odprowadzanie wiórów oraz łatwe załadunek i rozładunek. • Sterowanie: Siemens SINUMERIK 840Dsl z zintegrowanym PLC S7-300 oraz monitorem TFT 15”. • Wysoka precyzja: Dokładność pozycjonowania w osiach X i Z wynosi ±0,001 mm. • Główne wrzeciono: Wysoka moc i szeroki zakres prędkości obrotowych. • Automatyczny załadunek/rozładunek: Podawanie i odbiór detali odbywa się przez zintegrowaną automatykę. • Narzędzia napędzane: Możliwość użycia narzędzi napędzanych rozszerza zakres obróbki o operacje wiercenia i frezowania. Dane techniczne (EMAG VSC 250): • Producent: EMAG • Rok produkcji: 2011 • Numer maszyny: 103035 1. Napęd główny: * Zasilanie: 400 V/50 Hz / 43 kW * Moc napędu wrzeciona głównego (100% ED / 40% ED): 18 kW / 28 kW * Moment obrotowy wrzeciona: 300 Nm * Zakres prędkości: 0-4500 obr./min * Głowica wrzeciona: DIN 55026-A6 * Maks. masa detalu: ≤ ok. 6 kg 2. Uchwyt: * Hydrauliczny 6-szczękowy uchwyt specjalny EMAG z urządzeniem do zacisku czołowego i centralnym smarowaniem. * Typ: 6AGF 260 K6 K14 * Średnica: 260 mm * Ciężar: 57 kg * Maks. siła zacisku (zacisk wewnętrzny przy 50 bar): 12,8 kN * Maks. siła zacisku (zacisk zewnętrzny przy 50 bar): 4,2 kN * Szczęki zaciskowe: szczęki chwytakowe EMAG: HB-I-G-146-K14 do obróbki blachy mosiężnej (6-krotne). * Adapter szczęk: (6-krotne) L90x840xH50 z drobnym uzębieniem (SAV). * Masa kompletu adaptera szczęk: 5,53 kg. * Szczęki miękkie: SMW MWB-DA 165 Nr 03611 L70xB40xH60. * Masa kompletu miękkich szczęk: 2,70 kg. 3. Przestrzeń robocza: * Przesuw osi X: 745 mm * Przesuw osi Z: 300 mm * Prędkość przejazdu X: 60 m/min * Prędkość przejazdu Z: 30 m/min Kdodpjwp Ukvefx Aa Nsg * Siła posuwu X: 10 kN * Siła posuwu Z: 10 kN 4. Sterowanie: * Siemens SINUMERIK 840Dsl z PLC S7-300 * Monitor TFT 15” * Interfejs V24 5. Dokładność obróbki: * Osie (X/Z): ±0,001 mm * Wrzeciono (oś C): ±0,01° 6. Rewolwer narzędziowy: * EMAG Flange Turret Generation C361 – VDI 40 * Ilość stacji narzędziowych: 12 * Średnica uchwytu VDI: 40 mm * Maks. wymiary narzędzi: zależne od detalu * Czasy wymiany narzędzi (wieżyczka/narzędzie napędzane): 0,03 min / 0,04 min * Maks. prędkość narzędzia napędzanego: 6000 obr./min * Maks. moment i moc narzędzia napędzanego (100% ED / 10% ED): 15 Nm/3,5 kW / 40 Nm/8,5 kW 7. Układ chłodzenia: * Standardowe/najwyższe ciśnienie podawania: 7 bar * Zakres ciśnienia wewnętrznego podawania chłodziwa: 7 bar (brak regulacji) * Pojemność zbiornika: 360 litrów 8. Odbierak detali: * Brak odbieraka detali – załadunek i odbiór detali odbywa się za pomocą automatyki 9. Dane ogólne: * Wymiary maszyny (dł. x szer. x wys.): 3900 mm x 1500 mm x 3200 mm * Masa maszyny: ok. 7000 kg * Warunki otoczenia (temp. / wilgotność): do ok. 30°C / maks. 50% * Poziom hałasu (ciśnienie akustyczne / moc akustyczna): 78 dB(A) Lokalizacja: Zabrze, Polska Słowa kluczowe: tokarka pionowa, tokarka CNC, EMAG VSC 250, obróbka metalu, toczenie, maszyna produkcy

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 7.950 h, Fungsionalitas: berfungsi sepenuhnya, Vertikales Drehzentrum / Vertikaldrehmaschine Hersteller: EMAG Modell: VL6 (FANUC) Baujahr: 2021 Betriebsstunden: ca. 7.950 Gesamtgewicht: 10,5 t Hauptspindel 28,5 kW Leistung bei 40/100 % ED: 41/28,5 kW Drehmoment bei 40/100 % ED: 491/340 Nm Volle Leistung bei Spindeldrehzahl: 800 min⁻¹ Max. Drehzahl: 3.100 min⁻¹ Schlitten X, Z Antriebseinheit für angetriebene Werkzeuge (HP Revolverantrieb, C362) mit interner Kühlmittelzufuhr zum Werkzeug Max. Drehzahl: 9.600 min⁻¹ Volle Leistung bei 3.000 min⁻¹ Drehmoment bei 100 % ED: 33 Nm/10,4 kW Drehmoment bei 40 % ED: 44 Nm/13,8 kW Drehmoment bei 10 % ED: 56 Nm/17,6 kW Werkzeugaufnahmeeinheit für angetriebene Werkzeuge: 12 x BMT65 Kodpfewzwu Iox Aa Nodg Komponentenlager- und Fördersystem, O-Typ (GO 240") Trägerprismensystem für 10 Werkstücke Werkstückhöhe: max. 250 mm Werkstückgewicht: max. 40 kg Satz (10 St.) Trägerprismen für Werkstückdurchmesser: 150 – 300 mm Abblasvorrichtung für Werkstück und Spannmittel (Pick-up) Kühlschmierstoffversorgung: 15 bar Kühlschmierstoffpumpenleistung: ca. 80 l/min bei 15 bar Kühlaggregat (6,5 kW, Wasser-Luft) Doppelfilter für Kühlschmierstoff, manuell umschaltbar Filterfeinheit 100 µm, mit elektrischen und mechanischen Verschmutzungsanzeigen Späneförderer, Kettentyp – Heckauswurf Scharnierbandausführung: Heckauswurf Späneauswurfshöhe: 1.100 mm (mit integriertem Kühlschmierstofftank, Kapazität ca. 500 l) Emulsionsnebelabsaugung: Absaugleistung ca. 800 m³/h Spüldüse Werkstückvermessung mit Messtaster Tasterabblasung Werkzeugüberwachung (Sister-Tool-Management) 3-Farben-Signalleuchte Schnellbackenfutter SMW Autoblok KCNS-N400-128 max. = 3.500 min⁻¹ Satz harte Grundbacken Satz weiche Aufsatzbacken Softwarepaket Betriebsanleitung / Wartungsanleitung

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, We offer 4 Emag VL 3 machines for sale. Three machines are equipped with lifetool, one machine without lifetool. Year of manufacture: 2000-2001 General description: Manufacturer: Emag Machine type: VL 3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Swing diameter: approx. 210 mm Maximum speed: 6,500 rpm Kdsdotrdlaepfx Aa Nsg Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle mount: Size 5 Circulating parts conveyor. Machine weight: approx. 5.5 t Each machine comes with a used 3-jaw chuck. This description is not binding and should be verified by inspection.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, tahun perombakan terakhir: 2023, CAUTION: THIS MACHINE AT A UNIQUE SPECIAL PRICE. General Description: Year of manufacture: 2001/2023 Manufacturer: Emag Machine Type: VL3 Technical Data: Control: Fanuc 21i-T Swing diameter: approx. 210 mm Max. spindle speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine is not equipped with live tooling. Hinged belt chip conveyor Spindle interface: Size 5 Circulating parts conveyor belt Machine weight: approx. 5.5 t During this overhaul in 2023, the following work was carried out: - Machine completely disassembled, cleaned, and repainted - Main spindle bearings renewed - Linear guides and guide shoes for X and Z axes replaced - Ballscrews in X and Z axes replaced Ksdpstpu Szsfx Aa Nedg - New central lubrication unit and hoses installed - Hydraulic unit checked and serviced; drive coupling between motor and pump replaced - Cooling unit checked and serviced; temperature differential controller replaced - Clamping cylinder overhauled with new bearings and seals - A-axis gearbox bearings renewed and the coupling between motor and gearbox replaced - Electrical cabinet cleaned - Operator panel replaced - New monitor installed - New interior lighting fitted - Turret disassembled, wear parts inspected, cleaned and resealed - Turret encoder and encoder wheel cleaned - Linear measurement systems in X and Z axes disassembled and cleaned - Pickup station springs replaced - X and Z axis motors checked for bearing damage - Work area door glass replaced - Chip conveyor fully disassembled, bearings renewed, cleaned, and repainted - Various minor parts have also been replaced as a matter of course The product has been described by us with the utmost care. The description is non-binding and should be verified during an on-site inspection.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, For sale: A turning line for drive shafts including an end machining station (cutting to length & drilling). The line consists of the following machines: - Lang - Laru > For cutting to length and drilling - 3x Emag VTC 250 for machining (turning) the drive shafts All machines are connected via an Ewab conveyor belt. Each turning machine is loaded by a KUKA robot. Kjdpoupgbwsfx Aa Nsdg Technical specifications for the machines can be found in the images.

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Here is the professional English translation for use on platforms like Machineseeker and TruckScout24: A turning and milling machine EMAG VLC 800 MT with tool changer is being offered. The machine features a tool turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during machining, reducing setup times and enabling the use of sister tools. The proven EMAG turret is available for turning operations on the machining center. On the multifunctional VLC 800 MT production center, workpieces with a diameter of up to 800 mm can be completely machined in a single setup. The following components are included with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter Ksdpfxew Au U Ue Aa Nsdg - Chip conveyor CONTROL SYSTEM Siemens 840D MACHINE CONNECTION Power supply: 400V AC 50 Hz Connected load: 92kW Rated current: 143A Max. fuse protection: 160A The machine is sold on an "as is, where is" basis, with no warranty or guarantee claims. The machine will be available from November 2025 and will remain in production until then. Upon request, the machine can be completely overhauled. Please contact us for details.

Kondisi: bekas, Tahun pembuatan: 2008,