Beli Extruder bekas (408)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to standard plastics such as ABS, PLA, TPU, and Carbon PA, high-performance polymers like Ultem, Peek, CarbonPeek, and Helios-Peek are also available. The hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware/software and service. Ncjdpoibikwjfx Aglel Four material dryers are included in the scope of delivery. Payment terms: Advance payment, excluding transport and commissioning – these costs depend on the delivery address and will be invoiced accordingly.

Tahun pembuatan: 2013, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20910-01, Unused Hosokawa Bepex extruder, model BX 150, constructed from stainless steel (AISI 316), designed for low-pressure extrusion. This machine produces products with an open structure, large surface area, and good forming properties. The processed product is fed into the unit through the inlet opening. Inside the extrusion chamber, there are two counter-rotating rotors. - The upper rotor is a 2-arm design with additional scrapers for mixing and conveying material downward. The rotor is driven via a gearbox by a 0.55 kW, 60 Hz electric motor, with adjustable speed in the range of approx. 14 – 139 rpm. - The lower rotor features a 3-arm design with curved arms and rotor knives. The product is compacted and forced through a screen by the lower rotor. Granule diameter depends on the screen perforation size. The rotor is driven via a gearbox by a 3.0 kW, 60 Hz electric motor, with adjustable speed approximately 15 – 144 rpm. Includes (2) extrusion screens with 2 mm diameter perforations, 1.2 mm screen thickness, and a control panel with integrated controls. Mounted on a stainless steel frame with (4) wheels. Ncsdjt Tvx Tjpfx Aglol

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Screw diameter: 59 mm, screw speed: 25–250 rpm, complete with full documentation, control cabinet, screen changer, side feeder, granulator, and additional accessories. Njdpfx Ajhtvmhoglocl

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Throughput capacity: 140–180 kg/h, screw diameter: 50–103 mm, screw length: 1300 mm, max. screw speed: 43 rpm, connected load: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, cylinder cooling unit, and screw temperature control. Ncsdjhz Dyajpfx Aglol

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Ekstruder sekrup ganda, aplikasi: PIPA PVC ROLLEPAAL T-REX 90-30 Ekstruder dalam kondisi sangat baik dan siap dioperasikan Lokasi: Jerman, D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Ekstruder adalah milik saya sendiri Ncsdpoxcp T Nefx Aglsl

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Ncsdpfx Agehx Elfjlol Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Control cabinet and control panel The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer.

Tahun pembuatan: 2000, Kondisi: bekas, Speed: 227 rpm, Power: 31 kW, Heating output: 7.8 kW, Length: 1,952 mm, Width: 840 mm, Height: 1,920 mm, Weight: 820 kg. Nodpfxsduyyzo Aglecl

Kondisi: bekas, Tahun pembuatan: 2004, System for applying a butyl cord. Approx. length: 3000 mm Approx. depth: 700 mm Ncsdpfxsw A Ny Eo Aglsl Approx. height: 850 mm Weight: net/740 kg Condition: good/used

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Control panel: Siemens SIMATIC HMI, connected load: 80 kW, weight: 1.85 t, operating hours: approx. 4,500 h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Complete documentation is available, on-site inspection possible. Nsdpfxsv Uz Aws Aglscl

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), A total of three extruders are available, including throughput measurement units (scales), almost new cylinders (2018), and refurbished screws. Total extrusion capacity: approx. 100 kg/h. 1) DC smooth barrel extruder, motor power: 17 kW, machine dimensions (L/W/H): approx. 2300 mm / 600 mm / 1100 mm. 2) DC smooth barrel extruder, motor power: 32 kW, machine dimensions (L/W/H): approx. 3000 mm / 700 mm / 1200 mm. 3) DC grooved barrel extruder, motor power: 49 kW, machine dimensions (L/W/H): approx. 3000 mm / 700 mm / 1200 mm. An on-site inspection is possible. Ncsdpovw Aqhofx Aglsl

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 60X33 Njdpfeifgwhsx Agljcl Application: PE PIPES or PP PIPES Type: 60 X 33 Year of manufacture: 2000 Screw diameter: 60 mm Drive: 75 kW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, operational The extruder is my property. Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, BATTENFELD PE/PP PIPEHEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Njdpfxsvy It Tj Aglecl Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year 2007, for colour stripes The machine is my property Location: Sachal Extrusion Machines Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), AMUT EA90/24 SINGLE-SCREW EXTRUDER Type: RALDI Screw for PVC, oil-cooled Nsdpjk Nn Dzsfx Aglscl Application: PVC, PE, or PP Year of manufacture: 1999 Operating hours: 48,000 Drive: DC 36.3 kW 11 digital temperature controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Pull-off control possible via the extruder Condition: Good, ready for operation The extruder is my property Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Germany

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 90X33 Application: PE PIPES or PP PIPES Type: SJ 90 X 33 A6 Year of manufacture: 2011 Screw diameter: 90 mm Ncedpfxoifgwle Aglol Drive: 160 kW Output capacity PE: approx. 400 - 450 kg/h Condition: Very good, ready for operation The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Kondisi: hampir baru (bekas), Extruder hose parts for Weber DS 10.22 Ncsdpfx Agehlvm Nslol

Tahun pembuatan: 2006, jam operasional: 15.000 h, Kondisi: baik (bekas), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250-350 kg/h Currently, the system is processing HDPE, but it is also suitable for other plastics such as LDPE... Ncodpfjumubyjx Aglel The machine can be inspected during operation. A new extruder screw was installed in February.

Tahun pembuatan: 1999, Kondisi: bekas, Used Entex Extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Nedpfx Asbqt Arjglscl We can also offer you an Entex PL WE 70!

Tahun pembuatan: 2017, Kondisi: baik (bekas), Used Xtrutech Extruder XTS 24 available for sale. The extruder is fully operational and was used in the powder coatings sector. Comes with numerous spare parts. Nedpfxevcynuj Aglscl

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: Serien Nr. 64019447, Used Coperion Werner & Pfleiderer ZSK 34 MvC twin-screw extruder available for sale. The extruder was previously used for powder coatings. Ncsdpjvcyk Nsfx Aglsl

Tahun pembuatan: 2001, jam operasional: 64.499 h, Kondisi: baik (bekas), Screws conical, approx. 110 kg/h A.C. motor 30.0 kW New motor, 64,499 operating hours Nsdpow Hy Uuofx Aglscl

Tahun pembuatan: 1994, jam operasional: 32.303 h, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Conical Twin-Screw Extruder Manufacturer: Reifenhäuser Model: BT 1000-2-63 K Year of Manufacture: 1994 Machine No.: 32061 Operating Hours: 32,303 h Screw Geometry: Conical, for rigid PVC profiles Screw Diameter: 63 – 121 mm Screw Length: 1,300 mm Ncsdpfswxvpfsx Aglel Screw Speed: max. approx. 32 rpm Nominal Torque from Gearbox: 1,000 daNm Dynamic Load Rating of Thrust Bearing: 103,600 daN Motor Power: 43.0 kW Drive Motor: DC motor Baumüller Cylinder Heating/Cooling Zones: 4/3 (air-cooled with fan) Adapter Heating Zones: 1 Tooling Heating Zones: 5 Temperature Control: Digital temperature controllers (2 x PSG Multipact 88) Max. Permissible Melt Pressure: 500 bar Output Performance: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing unit and material hopper Extrusion Height: 1,150 mm Dimensions: 4,250 x 1,200 x 1,750 mm (LxWxH) without hopper Weight: approx. 3,000 kg Condition: The machine comes directly from production, has been cleaned, newly painted (RAL 7035, light grey), and function tested by us.

Tahun pembuatan: 1997, jam operasional: 31.850 h, Kondisi: baik (bekas), Conical twin-screw extruder - Manufacturer: CINCINNATI - Model: Titan 45 - Conical screws Ø45mm - Year: 1997 - 31,850 operating hours - Motor power: 15kW - Output: 120kg/h - Replacement motor - Replacement vacuum pump Njdpov D Nzmofx Aglecl - Replacement material feed screw

Kondisi: bekas, NEW BUTTER EXTRUDERS AND FORMING MACHINES FROM New butter extruders and forming machines by Butterextruder and Forming Machine Butter Extruder Semi-automatic butter extruding, forming and cutting machine mounted on a complete stainless steel frame, control panel included. Two stainless steel screw conveyors, stainless steel hopper. Cutting wires at the discharge conveyor make the machine user-friendly. Extruding, forming, and cutting machine Emergency stop button. Item condition: New Mould samples TECAFORM AH Blue Our newly developed extruder outlets TECAFORM AH Blue meet all current requirements for food contact marking. European Regulation (EC) No. 10/2011 and amendments European Regulation EC 1935/2004 Regulation (EC) No. 2023/2006 of the Council (GMP) FDA §21 CFR 177.2470 We use high-quality components. Utilizes high-quality components for the new DMUK EXSH 1-series by adding certified reducers, stainless steel parts, and bespoke control units. Mechanical engineering and construction: Experienced engineers and designers work on a wide range of workshop machines, CNC, plasma cutters, and forming machinery. We offer top quality machines with competitive lead times. Application: Butter and various viscous pastes Construction: Entirely made of stainless steel and glass bead blasted to give the metal its finish and to harden the surface. Shapes and Sizes: Choose your own shape and size Volumes: Depending on the model, we can offer machines for blocks weighing 50 g up to 25 kg in cartons. Nodpfxourulpj Agljcl Hopper volume on extruders: 18 liters and 50 liters Control panel: Butter work switch, butter extrusion switch, start/stop, and Safety: The machine is equipped with a stainless steel cover, which stops the machine when opened. Cutting: Cutting wires are lowered manually and will halt the machine. Discharge: The discharge conveyor is fitted with stainless steel rollers to support product release, preventing sticking or deformation. Electrical: This machine can operate with single-phase 220 V/50 Hz, three-phase 400 V/50 Hz, and US electrical systems with 60 Hz. Please specify at order. Lead time: 5 weeks Warranty: 12 months Spare parts: Dairy Machinery UK

Tahun pembuatan: 2010, jam operasional: 4.000 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: N/A, Cincinnati PAK 600 Extruder Spezifikationen Die Cincinnati PAK 600 ist ein Einschneckenextruder, der für Anwendungen mit hohem Durchsatz in der Kunststoffverarbeitung ausgelegt ist. • Antriebssystem: Erfordert zwei elektrische Einspeisungen – eine für den Schaltschrank und eine weitere für den Antriebsschrank. • Elektrische Anschlusswerte: Die maximale Stromaufnahme hängt vom verwendeten Standard-Wechselstrommotor und Antrieb sowie von der Anzahl der Zonen an Zylinder und Düse ab. Die genaue Strombelastung wird durch die Elektrokonstruktion anhand der jeweiligen Konfiguration festgelegt. Ncsdpowm Ngyofx Aglel • Betriebskennwert: Ausgelegt auf einen Servicefaktor (SF) von 1,0 bei 1750/100 U/min.

Kondisi: bekas, GS Mach extruder sekitar 6,5" dengan Water Ring Pelletizer, dilengkapi dengan spin dryer, screen changer, dan hopper, termasuk semua panel kontrol, 177 HP, motor 3 fasa, juga termasuk Color Feeder, dalam kondisi berfungsi, pemenang lelang bertanggung jawab atas pemutusan dan pengangkatan yang tepat. Nsdpfxoxd D Nne Aglecl