Beli Gannomat Protec bekas (59)

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor dan pemasang otomatis dengan majalah untuk pemrosesan otomatis engsel cangkir dan pelat pemasangan. Mesin pengeboran dan perakitan otomatis kami dikenal karena kekokohan, daya tahan, dan kemudahan pengoperasian. Ikhtisar singkat: • Mesin bor dan pemasang engsel cangkir berkapasitas tinggi • Unit pengeboran yang masif dan kokoh • Matrik penekan terbuat dari baja untuk masa pakai panjang • Pengeboran kayu solid dengan motor standar 1,5 kW Isdpfedx A Urox Aahjtr • Kontrol keselamatan dengan detektor logam (opsional)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir Iedpfx Aajw Td A Ishotr - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2005, Dowelling and slot mortising machine GANNER GANNOMAT JUNIOR 323 Very good condition, the machine is absolutely like new. It comes from an educational institution which was closed approximately one year after the machine was purchased. The machine has a maximum of 10 operating hours. Allows slot mortising and dowel drilling on 2 levels without repositioning. 380V, 1500W 2800 rpm Year of manufacture: 2005 With this machine, you can mill slots for, for example, lock cases and similar items, or produce all types of frame dowel joints—right-angled, butt, or mitred. Ideal for manufacturing dowel joints in timber frame construction, furniture, doors, windows, stairs, and similar applications. Thanks to drilling on 2 levels, the grid and stops, and the machine’s design, dowel joints can be made in the shortest possible time, making the machine highly efficient. With 2 fold-out table extensions. The machine requires a compressed air connection with 6 bar (very low air consumption). Right-hand rotation. Mills and drills very well and cleanly. Includes 2 angle stops (one central stop and one side stop, which can be used on either side). An adjustable mitre stop is also included. At the front of the machine table, there is a 2000mm long stop rail with 2 flip stops each; the stop rail can be shortened or extended as needed. Workpiece clamping is performed with 2 pneumatic clamping cylinders. Height adjustment between the two drilling levels is also pneumatic, with the pneumatic switch located at the front of the machine, allowing for rapid adjustment of grids and drilling levels. The heights of the individual drilling levels can be read on 2 mechanical counters; above the counters are adjustment screws to set the drilling heights. Isdpfx Aexqy Dneahetr With a precision 12mm grid rail, featuring a central grid and 12 stops left and right. Can be quickly converted to slot mortising mode, in which the machine can be used without grid rail, using 2 adjustable stops left and right, with a maximum working width of 420mm. Maximum drilling height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything works perfectly. We offer personal delivery within Germany for €220.00, including demonstration—so you have no risk with your purchase. Delivery to Austria and the EU is available upon request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional-grade equipment, not DIY hardware store quality. Ready for immediate use. With 2-jaw drill chuck up to 20mm. Very sturdy and durable construction. The precision guides with play-free ball bearing bushings are in perfect condition and operate smoothly.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Gannomat Mod. 260 case clamp Itjdpfjrfbnbox Aahjr Clamping capacity: 2500 x 1250 x 650 mm Working pressure: 0–10 bar Cylinder stroke: 110 mm Required space: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 CE compliant The machine is currently being serviced, and additional photos will follow shortly.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Informasi menyusul… Iodpfxextfu Ro Aahetr

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Gannomat Concept 70 Eco Carcase Press Year of Manufacture: 2025 including the following options: - Rapid traverse speed, adjustable movement speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections during carcase pressing, as well as for drawer manufacturing. Brief Overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless adjustment of pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and movement speeds: 5 / 10 / 25 mm/sec (with fine positioning / crawl mode) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: extremely simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: extremely simple operation via LCD display Universal Application Range: • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with overhanging top panels • Drawers • Pressing of multiple carcases/drawers simultaneously Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical carcase press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to tried-and-tested, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Very simple operation thanks to a practical operating panel • Fast thanks to pressure beam positioning speeds of up to 50 mm/sec (option) • Efficient due to precise pressing of various carcase sizes • Flexible thanks to adjustable parameters such as pressing force, pressing time, and movement speeds • Precise thanks to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a state-of-the-art carcase press Ijdpfx Ajvxgrreahstr

Kondisi: baru, Tahun pembuatan: 2025, Concept Easy adalah alat bantu pemasangan ideal untuk sambungan dowel saat pengepresan korpus serta saat pembuatan laci. Ringkasan produk: • Membutuhkan ruang kecil, kurang dari 1,8 m2 • Potensiometer untuk pengaturan gaya tekan yang tak bertingkat • Gaya tekan minimum 300 daN (kg) • Gaya tekan maksimum 2200 daN (kg) Itjdpodx Daaefx Aahjr • 3 kecepatan penekanan dan penyesuaian: 5 / 10 / 25 mm/detik (dengan posisi presisi / gerakan lambat) • Waktu tekan dapat diatur bebas dengan fungsi buka otomatis

Kondisi: baru, Tahun pembuatan: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard configuration according to price list 01/19/D with: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor, 1400/2800 rpm, 1.5 kW - Line laser with holder - Boring unit, continuously rotatable from the front (65°-0°-65°) - Positioning adjustment via digital counter Itjdpfxjxdttpj Aahjr - Pneumatic two-level positioning adjustment (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm division, with central detent and cross adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for extra wide frames 1 stop bar approx. 850 mm, reversible from left to right 2 flip stops - Drop-down mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction funnel, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on the indexing lever Pair of auxiliary workpiece supports, swiveling (left and right) Clamping column adjustable to the front Undercarriage with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Stair baluster drill bit Ø 25 mm made of chrome steel with centering point Available: at short notice

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Completely in standard configuration with: - Stable, torsion-resistant steel frame, welded and bolted construction - Side-mounted pressing beam with continuous pressure surface, equipped with a 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, floor) are continuous support plates, 25 mm thick and coated - Electromechanical adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance nuts with grease reservoir - Pressing operation is electromechanically actuated via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely adjustable via potentiometer and controlled by a frequency inverter, providing entirely wear-free press force regulation - Press force for the vertical pressing beam: min. 300 daN (kg) up to steplessly adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - User-friendly operation via 2 separate push-buttons, two movement modes (open/close) selectable via control unit - Freely adjustable pressing time preselection with automatic opening 0–30 min. (switchable to seconds or hours) - Working height/loading height: 200 mm - Working dimensions: Length min.: 150 mm, max.: 1300 mm Isdswx Nfgepfx Aahstr Height min.: 150 mm, max.: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor dan penanam pasak untuk pengeboran, pemberian lem, dan penanaman pasak secara bersamaan dalam sistem 32 mm melalui kepala bor multi-spindel dan stasiun pasak yang dapat diatur. Ringkasan: • Mesin bor dan penanam pasak serbaguna Ijdpfx Aedx Aw Noahotr • Pengoperasian sangat mudah • Sistem lem tertutup • Cocok untuk pengolahan papan dan kayu solid • Unit bor vertikal tambahan opsional • Mengurangi beban pusat pemrosesan CNC • Pelengkap optimal untuk mesin nesting

Kondisi: baru, Tahun pembuatan: 2025, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Isdpfx Aasw Sgnkjhotr Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: baru, Tahun pembuatan: 2026, Otomatis CNC bor dan penanam pasak untuk pengeboran, lem, dan penanaman pasak sepenuhnya otomatis. Pusat pemrosesan bor dan pasak dengan keunggulan compact, efisien, berkualitas dan fleksibel. Perkenalan singkat: • Mesin bor dan penanam pasak CNC universal yang dikendalikan komputer • Pengawasan suntikan lem melalui GIC • Sistem lem tertutup • Cocok untuk pemrosesan panel dan kayu solid • Spindel bor horizontal dan vertikal tambahan opsional Itedpfx Asdx Axfjahjr • Mengurangi beban pada pusat pemrosesan CNC • Pelengkap optimal untuk mesin nesting

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. Itedjw Tdymepfx Aahjr - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Tappienasennuskone pistoolilla samanaikaiseen liimaamiseen ja tappien asennukseen. Ammattikäyttöön huonekalu- ja kehysrakennuksessa. Iedpedx Abuofx Aahotr

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, - NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Phase, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch for FLUSHING – GLUING – GLUING/INSERTING - Dowel feed via electronic vibratory conveyor with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for adhesives with viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer using time preselection through electronic control - Selector switch for GLUE/WATER for flushing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection tank) - Indicator lamp for residual glue level display in glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning Itodpfedwi Rkjx Aahsr - 4 castors for moving the machine Includes one gun for dowels Ø 8 mm, dowel length 25 – 40 mm Insertion projection 7 – 20 mm Air connection: 6 bar Price from EUR 11,750 Ex stock 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor deret NC terkontrol untuk kapasitas produksi tinggi dengan 1 atau 2 balok bor, masing-masing dengan 76 spindle bor. Ikhtisar singkat: • Pengeboran deret lubang dalam SISTEM 32 mm • 76 atau 152 (2 x 76) lubang bor dalam satu siklus pengeboran • Penyesuaian kedalaman lubang bor untuk kedalaman pengeboran berbeda • Gearbox bor presisi masif dari GANNOMAT • Mesin bor deret untuk kapasitas tinggi Iodpfxsdxz S Ho Aahjtr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders Ijdpfx Ajxdttisahstr - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: baru, Tahun pembuatan: 2026, Untuk penentuan jumlah lem yang profesional dan presisi pada lubang bor dowel dan alur dinding belakang. Ringkasan: • Jumlah lem yang selalu sama dan benar • Tidak memerlukan pembersihan sisa lem berlebih pada benda kerja • Pembersihan sistem lem yang paling mudah dan minimal (sekali seminggu melalui program bilas) • Penghematan biaya lem • Pistol lem ergonomis dan ringan dibandingkan dengan botol lem • Pekerjaan lebih cepat dan lebih akurat dibandingkan dengan botol lem Ijdpfx Aajdxz Tpshetr

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water Itodew Sgm Hjpfx Aahsr - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor kontinu dengan pengeboran dan pemasangan dowel dua sisi Iodpfxjdx Axke Aahjtr dalam sistem 32 mm melalui kepala bor multi-spindel dan stasiun dowel yang dapat disesuaikan. Ringkasan singkat: • Mesin bor dan pemasukan dowel kontinu dengan sistem pengembalian benda kerja • Kebutuhan ruang kecil untuk mesin bor kontinu • Unit pengeboran vertikal tambahan opsional • Sistem lem tertutup • Mesin bor otomatis tipe kontinu untuk kapasitas tinggi

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Isdpsiidm Njfx Aahstr Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor dowel presisi dan akurat untuk pengeboran kabinet, fitting, dan deret lubang serta pengeboran pada konstruksi rangka dalam SISTEM 32 mm. DB adalah mesin otomatis dowel dengan 21, 27 atau 35 spindle bor presisi. Ringkasan fitur: • Mesin bor universal untuk pekerjaan papan dan kayu solid • Mesin bor dengan sistem kompensasi kesalahan sudut • Pengeboran dalam SISTEM 32 mm • Gearbox bor presisi berat dari GANNOMAT • Pengaturan sangat mudah melalui penghitung digital mekanis untuk pembatas samping dan depan, serta untuk tinggi bor Ijdsdxz Nkspfx Aahetr • Sistem quick-change pembatas tanpa alat • Pengeboran dowel, deret lubang, semua jenis konektor furnitur, lubang pegangan dan tembus, engsel cangkir, grup lubang 3, 5, atau 7, pengeboran rel laci, pengeboran untuk rangka pintu utama dan kaki meja, dll.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, LAMELLA BODY PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration including: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly clamped carcass joints - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates with a thickness of 38 mm - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance travel nuts with grease reservoir - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and controlled by frequency converters, making the pressing force regulation completely wear-free Itjdexvitiopfx Aahor - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Completely overhauled by Ganner, 6 months spare parts warranty Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor deret ganda dan aksesori, SISTEM 32. Mesin bor deret dengan 2 balok bor masing-masing 25 spindel bor presisi. Gambaran singkat: • Pemboran deret lubang dalam SISTEM 32 mm • 50 (2 x 25) lubang bor dalam satu siklus bor Ijdpfsdxz Ntsx Aahjtr • Penyeimbang kedalaman lubang untuk kedalaman bor yang berbeda • Gearbox bor presisi solid dari GANNOMAT • Pemboran konektor furnitur deret dan engsel cangkir (opsional) • Unit bor ketiga opsional

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor bantalan sudut dan gagang jendela (oliven) untuk pengeboran presisi dan efisien elemen jendela. Ringkasan: • Paket aksesori untuk pengeboran bantalan sudut • Pola pengeboran sesuai pabrikan (mis. G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... dan pabrikan lainnya) • Paket aksesori untuk pengeboran gagang jendela (oliven) Iodpsdx R Hcofx Aahotr • Gearbor presisi berat dari GANNOMAT