Beli Gannomat bekas (58)

Kondisi: bekas, 3238 Dowel Boring Machine Gannomat Combi RB 110 Used Precision universal dowel hole boring machine for carcass, frame, fitting, and line boring at 32 mm pitch The table can be pneumatically swiveled together with the drilling beam by 90° Short workpieces can be loaded upright Simple drilling for hinge cups and connecting fittings Miter and flat frame drilling Drilling from below Drilling of longitudinal and cross rails at the center stop Fully automatic pneumatic control with control panel Working width 800 mm Drilling beam with 23 spindles, 32 mm pitch Drilling stroke 75 mm Drill unit position adjustment 0 - 60 or 110 mm Spindle speed 2800 rpm Drill shaft diameter 10 mm Maximum clamping height of workpieces 80 mm Motor 1.5 kW, 380 V Compressed air connection 6 bar Weight approx. 450 kg Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Dismantling, loading, and transport by us optionally available Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty is given for used machines; the principle "sold as seen" applies Kdjdpfx Aew Id T Nsa Neg Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Fully automatic electronic control with program selector switch RINSING – GLUING – GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel delivery rate - Closed glue system with 6 bar glue pressure through glue nozzle - Selector switch GLUE/WATER for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection tank) - 1 stainless steel tank for 7.5 kg glue, as well as 1 stainless steel tank for 7.5 l water for rinsing/cleaning incl. 1 gun for dowels Ø 8 mm Kodpev Aubpjfx Aa Njdg Dowel length 25 – 40 mm Glue and dowel insertion tool completely overhauled and not used thereafter

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, jarak lubang: 32 mm, Ganner Gannomat edge and line boring machine Blum and Grass drilling head 7-spindle line boring head Kdsdpfx Aaeq E Ur Ao Nog including extension rulers 32 mm system pneumatic version

Kondisi: baru, Tahun pembuatan: 2025, Advantages of Pre-Glued Dowels • No additional glue required during dowel insertion • No cleaning effort needed for the water supply system Kodpfowu Dnnox Aa Njdg Advantages of the DübelJet • Recoil-free gun • Easy to operate • Portable hand-held device • Versatile application range Technical Data of the DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) • Dowel protrusion: 12 mm (factory setting, adjustable from 7 to 20 mm) Versatile application range • Insertion of pre-glued dowels (with water) especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g. in frame construction or in combination with screws or carcass connectors

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Motors: 2 x 1.85A, 50Hz, 380V, 2800 rpm Operating air pressure: 6 bar 30 spindles, mount diameter 10 mm Combination foot switch Emergency stop switch Kdsdpfov Nptmsx Aa Nog Main switch Manual height adjustment Manual lateral adjustment

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Power supply: 380V, 3.3A Motor output: 1.1 kW, 2800 rpm automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Kjdpfxjq Auwte Aa Njdg Weight: approx. 400 kg Includes: 1x adjustable gauge for line drilling 1x adjustable gauge for side stop 1x stop ruler, 1500 mm 1x stop ruler, 2000 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar fully automatic pneumatic control with foot pedal Kodpfx Aajv Npw Eo Nsdg additional switch for chip removal program T-drilling head with 7+2 drilling spindles, 32 mm pitch shank diameter of drill bits 10 mm 90° swiveling with locking mechanism undercarriage/mobile base

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Drilling and press-in machine for all types of furniture fittings, line and group hole drilling machine in System 32. Power supply: 400V, 0.75kW Spindle speed: 2800 rpm Stop ruler: 960 mm Kdodpfjumw Sbjx Aa Neg 2x swivel stops For drill bits with 10 mm shank diameter Maximum workpiece thickness: 40 mm 1x 7-spindle drilling head for line boring with 32 mm pitch, with integrated positioning pins Manual feed Base frame included Available at extra cost: Olive drilling head: €450.00 Mepla drilling head with pressing die: €550.00 Hettich drilling head with pressing die: €550.00

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jumlah sumbu: 6, This 6-axis GANNOMAT ProTec 571 was manufactured in 2017 and features a precision steel work table and a working stroke of 1000 mm on the X-axis. It is equipped with a drilling unit comprising 13 vertical and 6 horizontal spindles, a milling unit with a speed range of 3,000–18,000 rpm, and a grooving unit on the Y-axis. If you are looking for high-quality woodworking solutions, consider the GANNOMAT ProTec 571 machine we have available for sale. Contact us for further information. Machine Advantages Technical Specifications Kodex U Thwopfx Aa Nodg • Working stroke length (X-axis): 1000 mm • Working height: 905 mm • Workpiece size on X-axis: min. 85 mm / max. 1000 mm • Workpiece size on Y-axis: min. 285 mm / max. unlimited (max. 70 kg) • Workpiece size on Z-axis: min. 6 mm / max. 60 mm • Precision steel work table • BK6 drilling unit: 1.5 kW motor, 3200 rpm • Vertical spindles: 13 pcs // Horizontal spindles: (3+3) on Y-axis, (1+1) on X-axis • Milling unit: 4.5 kW, 3,000 – 18,000 rpm • Grooving unit on Y-axis Additional Information Machine still under power

Kondisi: bekas, Tahun pembuatan: 1999, jam operasional: 55 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1088.968, lebar total: 700 mm, panjang total: 900 mm, tinggi total: 650 mm, jumlah spindel: 5, berat keseluruhan: 70 kg, Kami menawarkan mesin bor fitting bekas Gannomat Model204, tahun produksi 1999. Kdsdpfsyak Hyex Aa Neg

Kondisi: bekas, Tahun pembuatan: 2023, New demonstration machine! List price: €86,567 net Base machine, complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the ProTec Type 0571 data sheet. Machining unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: MultiUnit machining head with PowerBlock 21/23 spindles, grooving saw, and optional Profit milling unit Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Power supply TN or TT Pneumatic connection 7 bar (102 psi) On machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory side To machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous: approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection 3x extraction ports Ø 80 mm Extraction speed 30 m/sec - measured at extraction port Extraction requirement min. approx. 2500 m³/h Machine weight approx. 1650 kg (with options!) Machine installation location: The ProTec can generally be anchored to the floor. A concrete floor (or foundation) is required (at least at the four corners/feet of the machine). Equipment: Protec 571 Profit HSK63F with 3-position magazine Folding roller table 765 mm (Y-axis), for machine front, width 500 mm Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety equipment via slat curtain Precondition for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank Ø 10 mm with clamping surface (JSO) 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R HW grooving cutter Ø 125/30 mm Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and by arrangement Tool holder HSK63 F 3.00 pcs For 462E/OZ25 collet Collet 462E/OZ25 for shank 25 mm, 3.00 pcs. Indexable insert end mill Z1+1 1.00 pc HW with indexable insert spiral drill Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert spiral drill, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (the adapter 0571WAB10 must be ordered separately). Decorative grooving cutter HW indexable inserts Z1 1.00 pc D Ø 17 mm, d Ø 10 mm, L1 Kodow Tfzfspfx Aa Njdg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Completely in standard configuration with: - Stable, torsion-resistant steel frame, welded and bolted construction - Side-mounted pressing beam with continuous pressure surface, equipped with a 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, floor) are continuous support plates, 25 mm thick and coated - Electromechanical adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance nuts with grease reservoir - Pressing operation is electromechanically actuated via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely adjustable via potentiometer and controlled by a frequency inverter, providing entirely wear-free press force regulation - Press force for the vertical pressing beam: min. 300 daN (kg) up to steplessly adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - User-friendly operation via 2 separate push-buttons, two movement modes (open/close) selectable via control unit - Freely adjustable pressing time preselection with automatic opening 0–30 min. (switchable to seconds or hours) - Working height/loading height: 200 mm - Working dimensions: Kedpfx Aaewx Nfgj Nodg Length min.: 150 mm, max.: 1300 mm Height min.: 150 mm, max.: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Kodsw Td A Ispfx Aa Nedg - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints Kdodpfx Aaow Sgnke Nsg - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: baru, Tahun pembuatan: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard configuration according to price list 01/19/D with: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor, 1400/2800 rpm, 1.5 kW - Line laser with holder - Boring unit, continuously rotatable from the front (65°-0°-65°) - Positioning adjustment via digital counter - Pneumatic two-level positioning adjustment (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm division, with central detent and cross adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for extra wide frames 1 stop bar approx. 850 mm, reversible from left to right 2 flip stops - Drop-down mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction funnel, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on the indexing lever Pair of auxiliary workpiece supports, swiveling (left and right) Kdodjxdttpopfx Aa Neg Clamping column adjustable to the front Undercarriage with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Stair baluster drill bit Ø 25 mm made of chrome steel with centering point Available: at short notice

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). Kdjdpfx Aaew Tdyms Nsg - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, - NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Phase, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch for FLUSHING – GLUING – GLUING/INSERTING - Dowel feed via electronic vibratory conveyor with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and length control with Auto-DL-Select system Kjdpfodwi Rkox Aa Nsdg (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for adhesives with viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer using time preselection through electronic control - Selector switch for GLUE/WATER for flushing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection tank) - Indicator lamp for residual glue level display in glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning - 4 castors for moving the machine Includes one gun for dowels Ø 8 mm, dowel length 25 – 40 mm Insertion projection 7 – 20 mm Air connection: 6 bar Price from EUR 11,750 Ex stock 54634 Bitburg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Ksdpsxdttisfx Aa Nodg Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis Kdedpfx Aaew Sgm Hs Neg - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Kjdpfxeiidm Ns Aa Njdg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" Working width 1300 mm Drilling, Grooving, Milling Base machine complete in standard version according to price list 01/19/D: For detailed technical specifications, see the data sheet for PROTEC Type 0571 - Processing unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 slotting unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000-20000 rpm with frequency inverter, forward and reverse rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for the processing of Lamello P-System. Required for horizontal milling for Lamello P-System with grooving cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in throughfeed mode, max. 5600 mm programmable workpiece length via software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine no. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A) - Counterpressure device from above for working width 1300 mm - Roller table 765 mm (Y-axis) foldable, for front side of machine, W 500 mm - Roller table 765 mm (Y-axis) foldable, for rear side of machine, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction manifold Ø 160 mm / Ø 80-80-80 mm, grid 196 mm - Documentation in German: Operating instructions: GERMAN Programming manual: GERMAN Operator software: GERMAN Kedpfx Aow Sguwsa Njdg Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, LAMELLA BODY PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration including: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly clamped carcass joints - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates with a thickness of 38 mm - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance travel nuts with grease reservoir Kjdpfx Aaexvitie Nodg - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and controlled by frequency converters, making the pressing force regulation completely wear-free - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Completely overhauled by Ganner, 6 months spare parts warranty Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baik (bekas), Tahun pembuatan: 1998, Universally usable frame dowel and slot mortising machine with angle adjustment. Especially suitable for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and spindle boring are easily achievable thanks to the swivel drilling unit. Motor with pole-reversal, two speeds Motor output: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start by practical handle switch Equipped with Röhm 2-jaw chuck 1 - 20mm Linear laser for precise workpiece positioning Drilling unit swivels 65 degrees left and right Pneumatic adjustment of working height; doweling on two levels without resetting Desired drilling heights per level can be set via digital counter, switching is pneumatic from the front Cross adjustment of 340mm, stepless or in 12mm increments using rack bar Pneumatic clamping possible at any position, operable from the front Max. height adjustment approx. 100mm above table height Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front 2 swiveling workpiece supports Extraction funnel Center stop + 1 side stop Fixed mitre stop Length stop as round bar Assorted drill bits Operating manual CE mark The machine has been partially repainted due to existing paint splashes. Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600mm (LxWxH), weight 380 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see 'more offers from this provider.' Kdjdpfx Ajxmatnja Nog

Kondisi: bekas, Tahun pembuatan: 2017, Jumlah spindel bor: 21 buah Jarak antar spindel: 32 mm Pemasangan mata bor: Permukaan penjepit dia. tangkai bor: 10 mm Pengoperasian: pedal kaki Peralatan: Ya Arah pengeboran: dari bawah & dari sisi depan Pengayunan: manual Sudut pengayunan: hanya 0° atau 90° Tinggi bebas maks.: 80 mm Lebar bebas maks.: 750 mm Jumlah penjepit material: 3 buah Jenis penjepitan material: pneumatik Desain: stasioner Sistem pembatas: hanya untuk seri konstruksi Berat sekitar: 400 kg Kdodpfsihghrjx Aa Nsg Daya motor: 1,5 kW Diameter saluran hisap: 120 mm Lokasi penyimpanan: di pelanggan

Kondisi: bekas, Tahun pembuatan: 2022, New demonstration machine! List price: €13,610. 400V, 3-phase, 50Hz / 1.5 kW. Supplied in standard configuration with: Fully automatic electronic control with impulse operation via foot pedal – clamping, drilling, releasing; automatic electrical return of the drilling unit upon reaching the set drilling depth; automatic extension of the drilling hole depth for face-edge drilling – eliminates the need to adjust the drilling depth when switching from flat to face-edge drilling (+10 mm, e.g. for dowels 35 mm long, drilling depth flat side 14 mm, drilling depth face side 24 mm). 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy tool change. The drilling unit can be swiveling from 0° to 90°, assisted by gas strut. 1 clamp carrier, Y-axis movable, with 3 pneumatic clamping cylinders, for workpiece heights up to 80 mm. Complete stop system comprising: 1 1800 mm stop rail for panel drilling (40x40 mm aluminium profile) with 3 drop-down stops, quick-change system, easily convertible from right to left side for mirrored cabinet drilling, also suitable for 32 mm system line boring. Easy-to-adjust stops and positioning, as well as drilling height adjustment over support table and mechanical digital display. Stops can be folded out for fast conversion from cabinet to frame drilling. Arms for clamp carrier designed for row drilling positions up to max. 300 mm. Ideal three-stage tool system. 1 set of dowel drill bits: 5 carbide-tipped dowel drills, Ø 8x77 mm, right; 4 carbide-tipped dowel drills, Ø 8x77 mm, left. Additional equipment: Dust-extraction funnel, dust-tested, Ø 120 mm. Complete system 32 row drilling set with: 2 guides with scale and adapter for positions max. 300 mm, 2 pairs of stop pins for row drilling for Y-position 37 mm and e.g. 300 mm, 1 base rail 1000 mm (40x40 mm aluminium profile), 1 setting gauge for row drilling. 1 set of drills: 11 carbide-tipped row drills, Ø 5x57 mm, right; 10 carbide-tipped row drills, Ø 5x57 mm, left. Hydraulic brake cylinder. Additional clamping cylinder with bracket. Location: Kdsdpsqw Ek Iefx Aa Nsg