Beli Gelombang Ganda bekas (2.075)

Kondisi: bekas, Tahun pembuatan: 1994, Pressure: 250 t Distance between uprights: 1650 / 1400 mm Fixed stroke: 150 mm Stroke rate: 30 - 75 strokes/min Shut height (stroke + ram adjustment at top): 665 mm Side upright opening: 550 mm Table surface: 1600 x 900 mm Passage opening in table: 1000 x 300 mm Pgedpfjvuucwox Abueg Table height above floor: 980 mm Ram surface: 1400 x 900 mm Drive power: 42.0 kW Machine weight: approx. 33.00 t Space requirement: approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic ram weight compensation, FIXED stroke, motorized ram adjustment, motorized central lubrication Electronic roller feeder (Normatic, AESL 500-2.8) with motor (Indramat), motorized lateral band guide, motorized height adjustment Tool change system Distance table - ram without tool change system approx. 765 mm Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 2010, de-to-hu Pgodpfx Ajvuubmobujg

Kondisi: bekas, Tahun pembuatan: 1982, Press force 30 t Stroke 8 - 40 mm Strokes per minute 100 - 600 /min Upright width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Lateral upright passage 300 mm Table area 540 x 470 mm Through-hole in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Weight 2.6 t Pgsdpfx Asvuk Hrebuog Space requirements approx. 1.5 x 1.2 x 2.2 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feeder (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm As is, where is, WITHOUT being put into operation

Kondisi: bekas, Tahun pembuatan: 1982, de-hu-it-lt-2024-06-27-01 Pgjdevuk Hlopfx Abueg

Kondisi: bekas, Tahun pembuatan: 1980, Pressing force 250 t Column gap 2000 mm Stroke 600 mm Distance table/ram, stroke up 1000 mm Table surface 1700 x 1300 mm Table height above floor level 800 mm Die cushion force in table 100 t Die cushion stroke in table 180 mm Die cushion surface in table 1650 x 700 mm Side frame opening 1000 mm Ram surface 1700 x 1400 mm Weight 31.1 t Space requirement (WxDxH) 3.3 x 1.9 x 4.85 m Height above floor 4.55 m Approved for manual loading according to German accident prevention regulations (UVV) with electrohydraulic drive, hydraulic die cushion in table, hydraulic shock absorption no pit required Pjdpfxsvut Tns Abuegg Can be offered without commissioning, with commissioning in as-is condition, or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1990, de-HU-01 Pjdjvut Tbopfx Abusgg

Kondisi: bekas, Tahun pembuatan: 1983, druk160t10 Podpfx Aevuk E Usbusgg

Kondisi: bekas, Tahun pembuatan: 1996, Pressure: 63 t Column gap: 965 mm Pedpfxsvut Rgo Abujgg Stroke: 4 - 60 mm Stroke rate: 30 - 800 strokes/min Shut height (stroke + ram adjustment at top): 380 mm Lateral column clearance: 355 mm Table area: 960 x 640 mm Through opening in table: 850 x 140 mm Table height above floor: 1,150 mm Ram area: 960 x 460 mm Drive power: 32.5 kW Machine weight approx. 13.00 t Space requirement approx. 3.3 x 1.7 x 2.9 m Ram adjustment: 80 mm Approved for automatic operation according to CE standard with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motorized ram adjustment, mechanical feed gripper type GF 160 Can be offered in its present condition, either without or with commissioning

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 63 t Stroke: 10 - 80 mm Strokes per minute: 75 - 400 Upright spacing: 1080 / 920 mm Shut height (stroke + ram adjustment at top): 450 mm Lateral upright passage: 300 mm Table area: 1000 x 550 mm Die opening in table: 700 x 160 mm Table height above floor: 1080 mm Ram area: 900 x 450 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Required space approx. 2.8 x 2.7 x 3.1 m (L x W x H) Pgsdpovut Ixefx Abusg Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive control (PIV), pneumatic clutch/brake combination (manufacturer: Ortlinghaus), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram weight compensation Servo roll feed Kaiser KWV 250.

Kondisi: bekas, Tahun pembuatan: 2003, dr-press-specs-1994 Psdpfx Aovut H Uobujgg

Kondisi: bekas, Tahun pembuatan: 2004, en_VErnGNwKJDgr1wSjQd5yMZ Pgedpfx Aev Svarebusg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 6.300 mm, jarak lintasan sumbu Y: 3.600 mm, jarak gerak sumbu Z: 1.800 mm, panjang meja: 6.300 mm, lebar meja: 3.600 mm, kecepatan spindel (maks.): 2.500 rpm, MESIN FRAIS JEMBATAN DYE CNC SIEMENS (RETROFIT 2019) SPESIFIKASI TEKNIS Merek: Dye (Retrofit) CNC: Siemens 840D Tahun: Retrofit 2019 Meja: 6300 x 3600 mm Sumbu X: 6300 mm Sumbu Y: 3600 mm Sumbu Z: 1800 mm Sumbu W (Batang) – jarak tempuh perlu dikonfirmasi Rak kepala: 4 posisi Termasuk 1 kepala sudut otomatis 360 posisi Psdpfxjydbhpo Abuogg Rak alat: 60 tempat Kapasitas motor kepala: 40 kW HARGA DAN INFORMASI LEBIH LANJUT SILAKAN HUBUNGI (CNC, SIEMENS, HAAS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MEKANISASI, PINACHO, MORISEIKI, MESIN FRAIS, BUBUT, MESIN GERINDA, BOR, PRESS, LASER, GUNTING PLAT, MESIN TEKUK)

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.700 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.050 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 15 m/menit, panjang total: 8.500 mm, panjang meja: 2.000 mm, lebar meja: 1.250 mm, lebar total: 7.500 mm, kecepatan spindel (maks.): 6.000 rpm, tinggi total: 5.020 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, CNC traveling column machining center manufactured by MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden. Designed for precise and heavy-duty machining of large-format workpieces. The machine features a classic traveling column design and is particularly suitable for toolmaking, mold making, and mechanical engineering applications. Equipped with Heidenhain TNC 430 M CNC control. Distance Spindle Nose – Table Vertical: approx. 300 – 1,350 mm with Universal Milling Head (UFK): Pedpfxoycw I Aj Abuegg vertical: approx. –290 to +760 mm horizontal: approx. –55 to +995 mm within table area: approx. 180 – 955 mm Spindle / Speeds Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal Milling Head (UFK): 10 – 4,000 rpm Universal Milling Head (UFK) Rotation around vertical axis: 360° (2.5° indexing) Swivel around horizontal axis: ±110° (2.5° indexing) Electrical Data (Nameplate) Connected load: approx. 68 kW Rated voltage: 400 V / 50 Hz Control voltage: DC 24 V Auxiliary voltage: 230 V Total weight: approx. 57 t CE-compliant, Made in Germany

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 87342, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.000 mm, panjang total: 9.000 mm, lebar meja: 2.000 mm, lebar total: 4.000 mm, kecepatan spindel (maks.): 10.000 rpm, tinggi total: 3.000 mm, pergeseran cepat sumbu Y: 2.000 m/menit, jenis arus masuk: tiga fasa, berat keseluruhan: 55.000 kg, produsen pengendali: Heidenhain, model controller: iTNC 530 HSCI, tegangan masuk: 400 V, pasokan pendingin: 20 batang, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Kepala putar Kepala putar 2-sumbu dengan sumbu A ±90° (180°) dan sumbu B 360°. Versi dengan roda gigi Hirth dan penjepitan hidrolik. Spindel / Penggerak Motor spindel hollow-shaft AC, 25 kW pada 100% ED, 40 kW pada 40% ED. Kecepatan hingga 10.000 rpm, dudukan alat SK40. Penukar alat Majalah rantai dengan 22 posisi alat. Perlengkapan Podsycw D Ropfx Abuegg Konveyor serbuk serpihan tersedia.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 1.100 mm, Mesin Milling Portal CNC 5-sumbu BELOTTI Eureka 4014 (4000x1400mm) Mesin frais / pusat pemesinan 5-sumbu Belotti Eureka 4014 Pgodpsycin Iofx Abueg Model 3414. Tahun produksi 2001. Unit tersedia di gudang, dalam kondisi baik, sepenuhnya fungsional. Tersedia segera, termasuk spindle cadangan yang sudah direkondisi 4kW, perangkat lunak dan dokumentasi lengkap. Cocok terutama untuk pemotongan dan milling komponen 3D – plastik, karbon, laminasi, MDF, kayu, aluminium, dll. Kecepatan spindle: 18000/600Hz – 24000/800Hz Pengiriman dapat diatur. Perjalanan sumbu: • Sumbu X: 4.000 mm • Sumbu Y: 1.400 mm • Sumbu Z: sekitar 1.100 – 1.200 mm

Kondisi: bekas, Tahun pembuatan: 2003, Pressing force 400 t Frame gap 1060 mm Stroke 450 mm Strokes per minute 15 - 30 Distance table/ram, max stroke up, adjustment up: 1160 mm Table area 1000 x 700 mm Ejector force in table 2 x 16 t Ejector stroke in table 125 mm Cushion force in table 120 t Cushion stroke in table 2 mm Ejector force in ram 2 x 4 t Ejector stroke in ram 100 mm Ram area 1000 x 700 mm Lateral frame passage 630 mm Drive power 55.0 kW Weight 50.0 t Year of manufacture 1986 - Overhauled 2003 Multi-stage press Psdjvzxpujpfx Abujgg with automatic parts feed, transfer system, cushion in table (2nd stage) as is, stored disassembled, WITHOUT commissioning

Kondisi: bekas, Tahun pembuatan: 2005, de-to-hu-it-lt-01 Pjdpfx Absvuuiksuegg

Kondisi: bekas, Tahun pembuatan: 2005, 1 Pgodpfxovuuh Ts Abusg

Kondisi: bekas, Tahun pembuatan: 1979, Pressing force: 1000 t Column width: 3030 mm Stroke: 350 mm Distance between table and slide, stroke at top, upper adjustment: 1400 mm Table size: 3000 x 2000 mm Table height above floor level: 430 mm Side column opening: 1450 x 1400 mm Slide area: 3000 x 2000 mm Downward speed: from 300 mm/s Upward speed: 340 mm/s Working speed: 18 - 44 mm/s Return force: 120 t Oil capacity: 4400 l Width with platform: 4950 mm Podevuk I Aopfx Abuegg Drive power: 2 x 90.0 + 10.0 kW Weight: 87.0 t Space requirements (W x D x H): 4.35 x 3.65 x 7.55 m Height above floor: 6.05 m Height below floor: 1.5 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) With electro-hydraulic drive, pressure/time and stroke-dependent control, adjustable speed, slide locking, two-hand operation Partially disassembled and stored – as is, without commissioning

Kondisi: bekas, Tahun pembuatan: 1998, Tekanan 800 t Jarak kolom 3550 mm Langkah 1100 mm Jarak meja/pelatuk, langkah besar atas, setel atas 1900 mm Luas meja 3500 x 1800 mm Tekanan bantal tarik di meja 350 t Pgedpfx Abevuuhgeuog Langkah bantal tarik di meja 280 mm Tekanan bantal tarik di pelatuk 80 t Langkah bantal tarik di pelatuk 160 mm Luas pelatuk 3500 x 1800 mm Bukaan samping kolom 1900 mm Berat 100,0 t Kebutuhan ruang (P x L) 5,3 x 4,3 m Tinggi di atas lantai 7,3 m Tinggi di bawah lantai 5,0 - 6,0 m Tahun pembuatan 1970 - Overhaul 1998 Dengan penggerak oli hidraulik, bantal tarik hidraulik yang dikendalikan di meja dan pelatuk, peredam benturan geser hidraulik, meja geser (tanpa rel untuk meja jalan) Tinggi di bawah lantai sekitar 5 - 6 m Dibongkar dan disimpan - Video tersedia dari pemilik sebelum pembongkaran

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, REIFENHÄUSER REITRUDER RZE 85 41:D Year of manufacture: 2007 Drive/Motor: 265 kW Screw diameter: 85 mm Throughput approx. 900 kg/h With gear pump, dosing station + work platform Last application: The system was used to produce PP pipes up to a diameter of 630 mm The Reitruder technology utilizes co-rotating screws. We have adapted this twin-screw technology for use in direct extrusion lines—primarily for inline compounding. This combines multiple process steps into a single step. Sustainability Process 100 percent recycled material In combination with efficient vacuum units, Reitruder technology allows you to process recycled PET bottle flakes directly—without energy- and time-intensive pre-drying. Cost-effectiveness Reduce raw material costs by 30 percent Our twin-screw Reitruder technology processes high levels of additives and fillers. Instead of using pre-compounded material, fillers such as calcium carbonate or talcum are continuously incorporated. At the same time, the direct extrusion process reduces energy costs in comparison to two-stage compounding: without the need for intermediate solidification and re-melting of the polymer, production runs from raw to finished product in one step with the Reitruder. Direct extrusion High quality without detours With direct extrusion, you achieve quality levels for semi-finished and finished products that previously required substantial technical effort. Take advantage of today’s technology by combining various process steps into a single stage. Reitruder RZE 85 EXTRUSION Among other new developments, the co-rotating twin-screw extruder Reitruder RZE 85 was the highlight of Reifenhäuser’s presentation at the NPE. A differentiated concept with new design elements was developed. The screw geometry was adapted to new requirements with deeper channel depth and a newly designed feed section. These measures improve the feed performance when processing PET flakes or regrind and increase the volume for dosing fillers. This results in significant benefits when processing lower-quality raw materials. Plus, improved venting efficiency allows the processing of material with moisture content up to 0.5 percent, minimizing the need for pre-drying. Applications: • Compounds • Recycled polymer • Thermoforming film • Cast film • Blown film • Foam film and boards • Strapping tape Price: 35,000.00 EUR LOCATION: Pgedpjxzr H Nefx Abusg SACHAL EXTRUSIONSMASCHINEN D-26345 Bockhorn-Grabstede Tel = WhatsApp

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, nomor mesin/kendaraan: 111-008668, Dijual dua unit crane jembatan, masing-masing dilengkapi dua hoist kabel per crane dengan kapasitas angkut setiap hoist 3,2 ton, merek ABUS, dengan remote control. Lebar jembatan 14.420 mm. Tahun pembuatan 2018, kondisi sangat baik. Ruang lingkup pengiriman: - 2 unit crane jembatan dengan total 4 hoist kabel, masing-masing berkapasitas 3,2 ton - Remote control dengan charger dan baterai cadangan - Pasokan listrik MSL 4/100 sepanjang 75 m - Dokumentasi / buku uji - Data teknis dan dimensi: dapat terjadi kesalahan. Gambar teknis tersedia di dokumen pdf. Crane jembatan juga dapat dijual terpisah. Podpeycwxzefx Abuegg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Gergaji dua kepala untuk profil aluminium atau PVC PERTICI UNIVER 400IP, tahun 2012 Kondisi: sangat baik - Dua mata gergaji karbida tungsten Ø400 mm - Sistem pelumasan pisau menggunakan spray mist Pgodpjhqb T Hsfx Abueg - Pemotongan maksimal antara dua kepala: 3500 mm - Kapasitas potong minimum antara dua kepala pada 90°: 580 mm - Kapasitas potong minimum antara dua kepala pada 45°: 580 mm - Pengumpanan mata gergaji secara hidro-pneumatik - Dua ragum pneumatik horizontal - Dua ragum pneumatik vertikal - Dua penyangga profil intermediate

Kondisi: sangat baik (bekas), NOMOR KATALOG 7065 DATA TEKNIS - diameter maksimum pisau: 300 mm - diameter spindle: 30 mm - pelindung pisau: 2 buah - pemotongan pneumatik (gerakan pisau naik/turun) - unit pemotongan dapat diatur pada sudut 45° - pengaturan manual jarak antar unit pemotongan - panjang potong minimum pada 90°: 220 mm - panjang potong maksimum pada 90°: 2820 mm - lebar potong: 110 mm - tinggi potong pada 90°: 90 mm - penjepit pneumatik: 2 buah - pedal kontrol - penyangga material - motor utama: 2×1,6 kW - dimensi (P/L/T): 3620x1100x1250 mm - berat sekitar 500 kg – tidak dicat – unit pemotongan dapat dimiringkan – gergaji bekas, kondisi sangat baik Pgjdpfx Ajx Sq E Iobusg Harga netto: 13.900 PLN Harga netto: 3.300 EUR tergantung kurs 4,2 EUR (Harga dapat berubah sewaktu-waktu mengikuti fluktuasi nilai tukar)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 193 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 480 mm, jarak gerak sumbu Z: 340 mm, lebar pemotongan (maks.): 335 mm, panjang benda kerja (maks.): 6.000 mm, kecepatan spindle milling (maks.): 6.000 rpm, panjang bagian (maks.): 6.000 mm, TECHNICAL SPECIFICATIONS – Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control system: eluCAM graphical, Windows XP user interface Work stations: 2 independently operating stations Revolver tool changer: 8 tools, servo-driven Tool holder: BT 30 Disc milling cutter diameter: 180 mm Tool length: 150 mm (from mounting point) Travel distances Travel path X-axis: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining) Travel path Y-axis: 480 mm Travel path Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min electrical connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT Two independent workstations with light curtain and camera system Fixed-angle milling head (not tiltable) for 2 tools, ER20A, up to 18,000 rpm Tiltable milling head 4 × 90°, ER20, up to 22,000 rpm Fixed-angle milling head for steel, ER20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide-tipped saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Coolant/lubrication unit for steel processing Disc milling cutter holder BT30, D=16 mm Disc mill D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL SPECIFICATIONS – Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inward, intermediate angles and acute 22.5° manually adjustable with digital display Cutting angle (tilting): pneumatically adjustable 90° and 45° inward Sawing direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilting: pneumatically automatic between 90° and 45° Pgedowprmzspfx Abusg Positioning accuracy: ±0.1 mm/m Positioning: pneumatic clamping Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electrical connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing safety guards Electronic positioning of heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotation and tilt angles Operation via Windows control system with 8.4" display and handwheel Saw blade cooling system included Saw unit with feed from below for optimal cutting force