Beli Hall Penghangat Ruangan Udara Panas Generator bekas (26.074)

Tahun pembuatan: 2006, Kondisi: baik (bekas), nomor mesin/kendaraan: WIZ, DEMAG KBK Crane System – Crane Runway Approx. 15 x 4 m Steel Structure (Space Requirement): 13.2 x 5.5 m Payload / Lifting Capacity: 500 KG (0.5 t) Technical Data of the System: Prsdpfxoiwdaqs Ab Isd - Crane runway made from Demag KBK2 profile rails - External dimensions of steel structure (space requirement): 13.2 x 5.5 m - Steel structure height: 4.85 m, Clearance under steel structure: 4.65 m - Clearance under crane runway: 4.4 m, Clearance under bridge: 4 m, Hook height: 3.8 m - Column spacing: 4 + 4 + 4.9 m The system is delivered complete: - KBK rails, rail connectors - Travel carriages, end plates, cable festoon system, brackets/suspensions, etc. - Complete steel structure (HEA180) - Including Demag DC 500 KG electric chain hoist The crane is dismantled and available immediately. Location: 75053 Gondelsheim, Germany Good condition, see photos (covered in oil mist – can be easily cleaned) Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are available from stock!

Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: 223230, 25279 Technical specifications: - Tank capacity 2,000 L - Operating pressure 11 bar Prjdpfx Aow Ekkweb Ied - Maintenance opening - Ball valves - Pressure gauge - Space requirement approx. W 1,250 x H 2,500 x D 1,250 mm - Weight approx. 450 kg

Kondisi: baru, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Hello, Psdpfjlc Eukex Ab Ierd we are offering a brand new Toshiba outdoor air conditioning unit. The unit is from the year 2018 but has never been installed. The unit has a capacity of 45 kW.

Kondisi: bekas, ARTUR NOLZEN TL30/30/50 Chamber Furnace Hot Air Furnace, Circulating Air Furnace, Heating Cabinet Serial No. 14785 Year of Manufacture: 1996 Temperature Range: up to 750°C Internal Dimensions: 300 x 300 x 480 mm Psdpfx Aoq Ubqijb Ijrd Internal Width at Central Web: 260 mm Connected Load: 6 kW Power Supply: 400 Volt, 50 Hz - Temperature Control: NOLZEN Type TRO t - 96 4 - Time Control: THEBEN, Type TR 635 top - Heating time to 750°C approx. 95 min. Space Requirement (L x W x H): 1300 x 1100 x 1400 mm Weight: 310 kg Good condition

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Air handler dengan teknologi EC untuk pendinginan atau pemanasan ruangan, kapasitas pendinginan dengan unit chiller 150 kW pada 7/12°C, kapasitas pemanasan 300 kW, aliran udara 20.000 m³/h, 4 outlet udara 500 mm, desain kompakt. Podpfx Abofzrgyj Ijrd

Kondisi: sangat baik (bekas), Eine gut erhaltene Saxon 2 Heißluft-Schweißmaschine auf einer höhenverstellbaren Edelstahl-Säule mit fahrbarem Edelstahl-Untergestell – Ausführung von rechts nach links Pedpfxewtgt Do Ab Ierd

Tahun pembuatan: 2001, Kondisi: baik (bekas), nomor mesin/kendaraan: KBK3, DEMAG KBK crane suspension system, crane runway, approx. 20 x 9 m Runway length can be variably configured! Any size possible. Payload / Lifting capacity: 250 KG - 0.25 t Technical data of the system: - Crane runway made from Demag KBK2 rails, bridge made from KBK3 - Installation height variable, chain length approx. 4 m System delivered complete, including: - KBK rails, rail connectors - Carriages, end plates, cable drag chain, brackets/suspenders, etc. Pedpfx Aehvpzheb Iord Including bridge with Demag 0.25 t chain hoist Shipping by freight forwarder possible, collection preferred Demag KBK1, KBK2 and KBK3 rails are in stock! Shipping by freight forwarder—please inquire with your postal code. Other dimensions or shipping rates on request; we will provide you with a prompt and non-binding offer!

Kondisi: baik (bekas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Peak Efficiency The most well-known device from REZNOR is the UDSA gas warm air heater, which ensures uniform air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 power ratings from 7 to 97 kW and features a heat exchanger, gas burner, and an exhaust fan. The combustion air can be sourced as standard either from outdoors or from the installation room. Psdowb A Hijpfx Ab Iord The REZNOR UDSA warm air heater guarantees even air distribution throughout the heated facility. Its patented heat exchanger sets new benchmarks for airflow behaviour and heat transfer, achieving an efficiency of over 92%. UDSA: compact, revolutionary, and trend-setting. This generation of units allows for particularly economical direct heating of halls—that is, without a central heating system—using decentralised, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater. The advantages: - Efficiency greater than 92% - Also suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - With CE system certification, Version B or C - Compact design for easy installation - Even heat distribution - Standard with vertical and horizontal air deflection louvres - Modulation of heating output up to 50% - EC technology - ErP Ready These units are direct-fired gas warm air heaters with fan-supported atmospheric multi-gas burners. Installation and all gas and exhaust-related connections must be carried out only by an authorised installation company. The gas WLEs are suitable for: - Operation with natural gas or LPG - Recirculating air operation - Inlet air temperatures below 5°C with stainless steel heat exchanger * - Single-stage or dual-stage heating, controlled via room thermostat and heating selector switch - Ventilation control via ECOtronic TN-L° with day/night/weekly programme - Exhaust routing via roof, Version B or C ° - Exhaust routing through external wall, Version C ° Gas WLE type: UDSA055-4E Appliance type: B22P-C12-C32-C52-C62 Designation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air flow rate: 5830 m3/h Protection rating: IP20 Pin no. 0461BN0677 More items – new and used – can be found in our shop! International shipping costs on request!

Kondisi: siap digunakan (bekas), Tersedia dua mesin yang identik, termasuk dokumentasi. Predpfxem Rg R Ao Ab Ied

Kondisi: bekas, Central extraction system, room air filtration unit ETS Efficient Technical Solutions GmbH Prsdpfoicic Hsx Ab Iod Central welding fume extraction system Year of manufacture: approx. 2005 Airflow: approx. 5,000 m³/h Extraction connection at filter inlet: 1,200 x 150 mm Exhaust connection at filter outlet: 400 x 300 mm Motor power: 10 kW Electrical connection: 400 V, 50 Hz - Control cabinet for wall mounting - Bag filter - Service hatch for filter replacement - Radial fan mounted at the top of the unit Space requirements (L x W x H): 2,000 x 1,650 x 3,650 mm Transport height without fan: 3,100 mm Weight: approx. 2,000 kg In very good condition

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Martina 85 Hot Air Furnace The MARTINA series of hot air furnaces represent an ideal solution for energy utilization in woodworking industries and crafts enterprises. These units have been developed especially for heating large utility spaces, such as workshops and production areas in both craft and industrial settings. Thanks to their design, these hot air systems do not require long preheating times and are capable of quickly heating joiners’ and carpenters’ workshops, as well as other manufacturing facilities. The fuel used includes solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE, the Italian Presidential Decree No. 459 of July 24, 1996, as well as the plant safety directive 89/392 CE. All models in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous ventilation operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Airflow capacity: 6,400 m³/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar Prsdpfx Ajvz Hq Tjb Iod - Required flue draught at nominal output: 0.18 mbar - Heatable space: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet (connector) diameter: 200 mm - Chimney diameter (reference value): 250 mm - Efficiency: 85-90% - Chimney draught: 16 Pa - Flue gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical details, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located on the rear lower section of the furnace. A maximum pipe length of 20 meters per air outlet is permitted for air distribution.

Tahun pembuatan: 2002, Kondisi: baik (bekas), nomor mesin/kendaraan: SIKBK, Demag KBK crane runway approximately 10x6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/suspensions, etc. Including Demag DK2 500 kg electric chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails available from stock! Other KBK systems also in stock. Load capacities from 125 kg to 1600 kg. Please inquire about your crane runway with desired cantilever and dimensions. Prsdpfsmqf Nbox Ab Ijd

Kondisi: baik (bekas), en-GB Prodpfx Abewb Axro Isd

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Diameter of process piping/regeneration drain piping/compressed air piping: 50mm/50mm/8mm; maximum inlet temperature: 34°C; maximum hardness: 10/20°Fr; operating pressure min./max.: 2bar/8bar; minimum filtration rating: 5µm; maximum glycol content: 25%; dry air output: 50m³-150m³/h; dew point: below 50°C; maximum process temperature: 200°C; vessel volume: 30dm³-200dm³; maximum compressed air consumption: 300l-500l/h; machine dimensions (L/W/H): approx. 800mm/650mm/1100mm; weight: approx. 150kg. Documentation available. On-site inspection possible. Podpfxjuk I Etj Ab Ijrd

Kondisi: bekas, WORTHINGTON - CREYSSENSAC screw compressor, model Rollair 40 -- RLR 40BM6 Serial No.: 6240330200 Year of manufacture: 2003 Free air delivery: 4.6 m³/min Operating pressure: 10 bar Psdpsfmim Usfx Ab Isrd Main motor power: 30 kW Mains connection: 400 Volt, 50 Hz Connection thread: 1 1/2 inch - 36,004 switching hours (read off) - 19,256 load hours (read off) - Sound-insulated Required space (L x W x H): 1850 x 1050 x 1760 mm Weight: 910 kg Good condition

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Warm Air Furnace MARTINA 55 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units have been developed for heating larger usable areas such as production halls and workspaces in both craft and industrial operations. MARTINA warm air systems require no lengthy heat-up phases and quickly heat up workshops for joineries, carpentries, and other production facilities. Suitable fuels include solid wood and its by-products, such as solid wood panels, wood scraps, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 CE. All MARTINA series warm air furnaces (models 15–30–55–85–120–180–240–350) meet both emission stages required by the German 1st BImSchV regulation. Predpfxjvz Hq Hj Ab Iod - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air capacity: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heated room volume: approx. 1000 m³ - Heated area: approx. 220 m² - Space required: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue outlet diameter: 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney draft: 13 Pa - Flue gas temperature: 290 °C - Warm air outlet connectors: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet. The two warm air outlet connectors are located on the rear lower section of the furnace. A maximum pipe length of 20 meters per outlet is allowed for distributing warm air.

Tahun pembuatan: 1987, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: Abus 2to MM2, ABUS overhead travelling crane, crane runway, bridge crane, indoor crane Rated load / lifting capacity: 2t – 2000 kg, span approx. 2,700 mm External dimension approx. 3,100 mm Pjdpfxjifyhho Ab Iord Approx. year of manufacture: 1987, with pendant control Construction height (top of crane to hook): approx. 900 mm Head beam length without buffers: approx. 2,200 mm The crane is dismantled, stored, and available immediately. Very good condition Pillar jib cranes and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarding available—please inquire with your postal code. Collection preferred.

Kondisi: bekas, Cartridge Pulse Filter Extraction System – Central Extraction Unit VALCO Type Pidclean 4N Central Welding Fume Extraction Serial No.: 15003 Year of Manufacture: 2003 Max. Airflow: 3,500 m³/h Filter Surface Area: 92.8 m² Differential Pressure: 700 Pa Extraction Connection at Filter Inlet: Ø 250 mm Exhaust Air Connection at Filter Outlet: 225 x 160 mm Compressed Air Requirement: 4 to 6 bar Motor Power: 5.5 kW Power Supply: 400 Volt, 50 Hz - AUTEL filter control, Type Eco S6 - Automatic pneumatic filter cleaning via control unit Pedpfx Abjmquwqs Iord - 4 cartridge filters, each Ø 350 x 660 mm - Service hatch for filter replacement - Radial fan mounted on top of unit - Mobile dust collection bin, approx. 40 litres - Silencer for fan outlet, Ø 250 mm - Electrical schematic and operating manual for control system available Required installation space (L x W x H): 2,150 x 1,350 x 2,560 mm Weight: approx. 550 kg Good condition

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1,400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating large areas, such as workshops and workspaces in craft and industrial businesses. These hot air systems require no long preheating phases and can quickly heat up the workshop, carpentry, joiner's shop, or other production facilities. Solid wood and its by-products—e.g., solid wood board remnants, chips, sawdust, pellets, or briquettes—are used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV mandatory emission limits. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draft at nominal output: 0.18 mbar - Heatable space: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney draft: 11.5 Pa Prodpfx Ajvz Hqyeb Isd - Flue gas temperature: 289°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the enclosed data sheet The two pipe connectors for the outgoing hot air are located at the rear of the furnace, in the lower section. A maximum of 20 meters of ducting per pipe connector is allowed for air distribution. Longer runs are optionally possible after consulting the manufacturer. Please contact us for further details.

Kondisi: bekas, KAESER Piston Compressor Type EPC 630-250 Serial No. 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 l/min Intake capacity max.: 630 l/min Pressure output: 10 bar Receiver capacity: 250 liters Motor power: 3 kW Predpowypqrjfx Ab Isd Power supply: 400 V, 50 Hz (with 16 A plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to cut-off pressure (10 bar): 5 min Footprint (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating larger usable areas, such as workshops and workspaces in craft and industrial operations. These hot air systems require no lengthy heating-up phases and quickly warm up workshops in joineries, carpentry shops, and other production facilities. The fuel used includes solid wood and its by-products, such as offcuts of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission standards required by the German 1st Federal Immission Control Ordinance (BImSchV). - Automatic mode and continuous air operation - Thermal output: 14.8 kW - Thermal output in kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm Predpevz Hqtsfx Ab Iod - Feed door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Negative pressure in combustion chamber: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286°C - Warm air outlet nozzles: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connectors for the outgoing warm air are located at the rear of the furnace in the lower section. A maximum pipe length of 20 meters per connector is allowed for air distribution.

Kondisi: bekas, KAESER Screw Compressor, Model BS 50 Serial No. 402852 Year of manufacture: 1990 Free Air Delivery: 5 m³/min Working Pressure: 7.5 bar Main Motor Power: 30 kW Power Supply: 400 Volt, 50 Hz Connection Thread: 1 1/2" inch - 1,107.90 operating hours (read) - 749.00 load hours (read) - Sound-insulated Podpfx Abjiyu Ifj Ijrd Dimensions (L x W x H): 1,600 x 1,070 x 1,350 mm Weight: 900 kg Very good condition Was used as a backup compressor and has very few operating hours

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilisation in wood-processing industrial and craft businesses. These units are designed for heating larger commercial areas, such as workshops and workspaces in trading and industrial companies. These warm air systems require no lengthy heat-up phases and are able to quickly warm up factories, carpentry workshops, joinery shops or other production sites. Suitable fuels are solid wood and its by-products, such as solid wood board residues, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated 24 July 96, as well as plant safety directive 89/392/CE. All warm air furnaces of the MARTINA series—15, 30, 55, 85, 120, 180, 240, 350—meet both emission regulation stages required by the German 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 29.8 kW - Thermal output in kcal: 25,700 - Fuel consumption: 9 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draft at rated output: 0.18 mbar - Heated room volume: approx. 600 m³ - Heated area: approx. 120 m² Prodpfx Asvz Hqmob Ied - Installation space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draught: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connection: 2 x Ø 200 mm - Further details available in the attached data sheet The two pipe connections for the outgoing warm air are located at the rear of the unit in the lower section. Each outlet allows a maximum of 20 metres of ducting for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, en1 Prjdpfx Abevz Hqgo Isd

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industries and craft businesses. They are specifically designed to heat large work areas, such as factory halls and workshops in both industry and craft sectors. These hot air systems require no lengthy heating-up period and are capable of warming up the workshop, carpentry, or other production facilities in a short amount of time. The fuel source can be solid wood and wood by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission limits as set out in the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 Kcal - Fuel consumption: 30 kg/h - Air delivery: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air fan: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2-0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable space: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm Psdpfx Asvz Hhxsb Iord - Recommended chimney diameter: 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet connections: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two outlet connectors for the emitted hot air are located on the rear lower section of the furnace. A maximum pipe length of 20 meters per connector is allowed for air distribution.