Beli Index V 200 bekas (163)

Kondisi: bekas, Tahun pembuatan: 1994, Technical details: Turning diameter: 200 mm Swing diameter: 260 mm Turning height: 200 mm Tool table: 1054 x 400 mm Dimensions (L x W x H): 2200 x 2300 x 2300 mm Weight: 3,300 kg Cross slide travel (X-axis): 520 mm Ihedpfx Ageyk Utrs Rew Longitudinal slide travel (Z-axis): 200 mm No pallet transport system included, no C-axis, no driven tools.

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), drehmaschine_200mm_20 Iodjym Dfcspfx Ag Rehw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 92.000 h, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It offers a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret featuring 12 stations and driven tools on both turret 1 and 2. If you are looking for top-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we have for sale. Contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in the CAM programming system • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Sub-spindle coolant flushing (electrically actuated shut-off valve) • Foot switch • Turret (12 stations) upper and lower • Driven tools on turret 1 and 2 Isdpfx Aeylw Dceg Rohw • Control function "Synchronous tailstock" for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant supply on slides 1 and 2 with solenoid valve • Coolant washdown gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Gantry unloading device with actuated gripper, NC-controlled • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion application) • High pressure pump 80 bar • Workpiece clamping: • Collet chuck for pull rod, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large selection of driven tool holders and spare parts inventory

Kondisi: bekas, Tahun pembuatan: 2001, Max. rotary diameter: 450 mm Chuck diameter: 400 mm Control unit: Siemens 840D (Index) Max. spindle speed: 4,200 rpm Main spindle drive power (35.5 / 56) kW Max. torque (340 / 550) Nm C-axis: 0.001° Number of tool stations: 2x 12 positions driven stations: 2x 12 positions Tool system: VDI 30 Max. speed of driven tools: 6,000 rpm Driven tools drive power: 9.5 kW Max. torque (40%): 19 Nm Y-axis: +/- 90 mm B-axis: +270° / -90° X-axis: 730 mm Z-axis: 340 mm Y-axis: +/- 90 mm B-axis: +270° / -90° Rapid traverse X: 40 / Z: 30 m/min Number of pallets: 24 positions Pallet size: 410 x 300 mm Max. workpiece diameter: 300 mm Max. workpiece weight incl. pallet: 25 kg Chain width: 75 mm Iodpfxoyq Sk Ie Ag Rshw Belt speed: 7.5 m/min Total connected load: 56 kW Machine weight: approx. 9.0 t Space requirements: approx. 8.5 x 6.0 x 2.7 m CNC vertical lathe INDEX - V 300 Y/B - incl. 24-position Schnaithmann pallet circulation system - incl. ball screw spindle as spare part - incl. 39x driven tools - incl. 39x tool holders

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Kontrol Siemens SINUMERIK 840D, C200-4D Kecepatan putar: 6000 1/menit Perjalanan X/Y/Z: 280/280/145 mm Jumlah revolver: 1 dengan 6 posisi Jumlah tempat alat: 2x4 Konveyor serpihan Sabuk konveyor palet Palet Ihjdpfxsyp Icwj Ag Row

Kondisi: bekas, Tahun pembuatan: 1997, clqoidtuo00023b6sdtn40rma Ihjdpsylp Awsfx Ag Rsw

Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm Isdpfjyqvygjx Ag Rehw Turning length: 400 mm Control: Siemens Type: C 200-4 840 C Spindle bore: 65 mm Tool changer: 2 x 14 positions Driven tools: 2 x turret Machine weight: approx. 4 t Main and sub spindle 3-jaw chuck with multiple jaws Hainbuch collet chucks Numerous tool holders Various driven tools Bar feeder "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc., see photo The technical data are as provided by the manufacturer/operator and are therefore not binding for us. We reserve the right to prior sale; only our terms and conditions of business and sale apply. About us: - Over 400 of our own machines in stock - More than 15,000 m² storage space, crane capacity 70 t - Over 10,000 accessory items for your workshop If you wish to sell machines, production lines, or your business, please contact us. You will find further offers on our website. Viewings are possible by prior arrangement. We look forward to your visit. Your Markus Hirsch Team

Kondisi: bekas, EN-001 Isdpfx Aevxmy Nsg Rjhw

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Kontrol: SIEMENS Lubang spindel: 65 mm Panjang pembubutan: 660 mm Maks. putaran: 6.000 rpm Spindel lawan Z= 700 mm PEMEGANG ALAT 1 dengan spindle milling Spindle milling: 7.200 rpm Sumbu-B 360° 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 230 / Y= ±65 / Z= 845 PEMEGANG ALAT 2 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 140 / Y= ±45 / Z= 810 Ihsdpfx Aoyi Uk Ijg Rjw Konveyor serbuk (chip conveyor) Filter Bar feeder INDEX MBL

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de_hu_1 Ijdpfx Agjyfv Nke Rehw

Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm Turning length: 400 mm Control: SIEMENS SINUMERIC 840 C Total power requirement: 40 kW Machine weight: approx. 6,500 kg Space requirement: approx. m INDEX CNC Lathe with 2 turrets, bar loading magazine, workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture: 1998 # 810 728 _____ Bar capacity for bar machining: approx. 42 mm Workpiece swing diameter: approx. 400 mm Turning diameter for chuck work: 200 mm Turning length / distance between centers: approx. 400 mm Turret slide travels Z1 (longitudinal) / X1 (cross): 400 / 120 mm Turret slide travels Z2 (longitudinal) / X2 (cross): 400 / 105 mm Feed force for Z/X axes: 15 Nm Rapid traverse speed of tool carriers 1 and 2: 22.5 m/min Turret tool stations / max. speed: 14 x VDI 30 / 6,000 rpm Spindle speeds / driven tool speeds up to max.: 7,000 rpm Max. spindle torque: 95 Nm Spindle drive / driven tool drive: 20 / 5.5 kW Total drive power: approx. 40 kW - 400 V - 50 Hz Weight: approx. 6,500 kg Ijdpst Hw Rkofx Ag Rjhw Accessories / Special equipment: • SIEMENS CNC 7-axis path control type SINUMERIC 840 C for the following axes: Turret 1 and Turret 2, C-axis, counter spindle axis and C-axis for the counter spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand control device • C-axis for the main spindle with automatic spindle indexing and positioning system • 1 counter spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loading magazine type MBL for bars up to 3 m length • Hydraulic chucking system on main and counter spindle • 2 x tool turrets with 14 stations for VDI 30 tool holders and 14 powered tool stations for milling and drilling operations, various tool holders, drill breakage control in the chuck area, ideal for cross drilling (!) • Workpiece handling system type WHU with linear gripper but without stacking system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system • Powered angle tools, approx. 20 pcs. total, etc. Condition: Good to very good – can be demonstrated under power Delivery: Ex stock – as inspected Payment: Net – payment due upon receipt of invoice.

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) Ihsdpfx Asv Ig Avsg Rew - Chip conveyor - Spindle cooling - Parts removal

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 510864, panjang pembubutan: 200 mm, CNC turning machine INDEX G200 Completely overhauled: 2017 Machine number: 510864 Max. turning length: 200 mm Bar feeder INDEX MBL Main spindle Collet chuck through-hole: 42 mm Spindle diameter at front bearing: 85 mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Max. nominal turning diameter: 200 mm Max. swing diameter: 420 mm Power Pmax 100%: 7.5/13/20 kW Torque Mdmax 100%: 35/61/95 Nm Spindle speed: 6300 rpm Counter spindle Collet chuck through-hole: 42 mm Spindle diameter at front bearing: 85 mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 mm Power Pmax 100%: 7.5/13 kW Torque Mdmax 100%: 35/61 Nm Spindle speed: 6300 rpm Min. distance collet: 15 mm Longitudinal travel: 445 mm Rapid traverse: 22.5 m/min Cross slide 1 XZ (top) XZ: 120 x 400 mm Ihedpfxoulhinj Ag Row Feed force: 5000 N Cross slide 2 (bottom) XZ: 105 x 400 mm Feed force: 5000 N Further information available on request!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 28.742 h, Fungsionalitas: berfungsi sepenuhnya, saluran batang: 65 mm, FANUC Series 31i-Model A 3 turret Iodpfxsydmbue Ag Rehw Konveyor bagian Majalah Detail lebih lanjut atas permintaan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 22.000 W, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling centre, Index G200 C, was manufactured in 2000. Take advantage of the opportunity to acquire this Index G200 C turning and milling centre. Contact us for further information. Additional Equipment Iodpfx Aeyailzsg Rehw • Synchronisation device for sub-spindle machining • Tool carrier 3 for sub-spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning device • Tool changer without gripper (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • With C-axis • No driven tools Machine Advantages Technical Advantages • Footprint (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel with multi-axis configuration • High precision with 0.001 mm resolution in numerical control • Versatile expansion steps and supplementary equipment for enhanced functionality Additional Information Motion Cross Slide 1 (top) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotating): 360° swivel range, angle increment 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross Slide 2 (bottom) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm Turret right: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock centre distance: 400 mm Max. thrust: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Filling capacity: 70 litres Coolant system: Pump output (switchable): 20 l/min @ 18 bar / 50 l/min @ 3 bar / 60 l/min @ 5-7 bar Filling capacity: approx. 230 litres Chip conveyor: Hinged belt or scraper conveyor Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Sub-spindle: D140 external mount (only pull tension allowed for collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (30 mm bore) / 85 mm (42 mm) / 100 mm (60 and 65 mm) Max. speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar diameter (workpiece-Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine depth 3580 mm

Kondisi: bekas, Tahun pembuatan: 1996, Tipe: Mesin Bubut Multispindel Merek: Index Isdpfx Ageyn Hmxe Rjhw Model: G200 Tahun Pembuatan: 1996 Kondisi: Bekas Jumlah: 1

Kondisi: bekas, Tahun pembuatan: 2011, de-to-hu-1 Ihedpjyuzfpofx Ag Row

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), d0d942de Ihsdpfx Aeym Dgmog Row

Kondisi: bekas, Tahun pembuatan: 2022, INDEX - C200 - 2022 Ihedpfeyl Nnaox Ag Row - kondisi sedikit digunakan seperti terlihat pada foto - dalam keadaan terhubung listrik, dapat diuji

Kondisi: bekas, Tahun pembuatan: 2014, INDEX C200 CNC Lathe 3 Turret 2 Spindle Kontrol Fanuc: 31i-Model B Pemegang Motoris Aksial: 6 pcs Pemegang Motoris Radial: 13 pcs Pemegang Alat: 11 pcs Pemegang Boring Bar: 21 pcs Pin: 1 pcs Bushing & Sleeves Loader: Ø51/Ø46/Ø41 Bushing loader MBL baru: 2 set 2 skala optik direkondisi oleh HEIDENHAIN 1 Box Lengan Portal soket Balluff dengan berbagai sensor, saklar induksi, dan kabel Belt motoris: 6 pcs Set bushing anti-vibrasi untuk loader MBL Iedpsxxm Hfjfx Ag Rshw Waktu operasi: On time: 37.946 Jam hidraulik: 37.500 Waktu produksi: 26.500 Dengan MBL Bar Feeder

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, INDEX C200, Tahun pembuatan: 2021. Kontrol: Siemens Solution Line. 3 turret. 2 spindle. D=90 mm. IRCO VDI 30. Dilengkapi dengan perkakas seperti pada gambar. Pengumpan batang dengan majalah pendek. Mesin berlokasi di Eropa. Iodpfxex Av Dbe Ag Rehw

Kondisi: seperti baru (mesin pameran), Gambar No.: 1408 Kondisi seperti baru, VDI40 DIN 69880 dudukan alat - chuck collet Collet: DIN 6388-A; Tipe: 444E No. Artikel: 433011- Lebih banyak dudukan alat VDI40 bekas dapat ditemukan di www:/wk-sales.de atau atas permintaan Collet DIN 444E atau ER 40 termasuk mur penjepit. Collet tidak termasuk dalam pengiriman Diameter luar: 50 mm Panjang penjepitan eksternal: 65 mm Ihjdok Nz Ehjpfx Ag Rew

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), de_DE-0001 Iodpfxjyifk Ns Ag Rjhw

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Maximum speed range: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14 stations, Siemens control. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar feeder. Completely overhauled in 2016. Iedpfxotdwwmo Ag Rohw

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Maximum turning diameter: 200 mm, maximum turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Ijdpfxotdwwqs Ag Rshw