Beli Index C 200 bekas (159)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 22.000 W, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling centre, Index G200 C, was manufactured in 2000. Take advantage of the opportunity to acquire this Index G200 C turning and milling centre. Contact us for further information. Additional Equipment Godpfxjyailzj Aiyoub • Synchronisation device for sub-spindle machining • Tool carrier 3 for sub-spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning device • Tool changer without gripper (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • With C-axis • No driven tools Machine Advantages Technical Advantages • Footprint (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel with multi-axis configuration • High precision with 0.001 mm resolution in numerical control • Versatile expansion steps and supplementary equipment for enhanced functionality Additional Information Motion Cross Slide 1 (top) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotating): 360° swivel range, angle increment 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross Slide 2 (bottom) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm Turret right: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock centre distance: 400 mm Max. thrust: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Filling capacity: 70 litres Coolant system: Pump output (switchable): 20 l/min @ 18 bar / 50 l/min @ 3 bar / 60 l/min @ 5-7 bar Filling capacity: approx. 230 litres Chip conveyor: Hinged belt or scraper conveyor Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Sub-spindle: D140 external mount (only pull tension allowed for collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (30 mm bore) / 85 mm (42 mm) / 100 mm (60 and 65 mm) Max. speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar diameter (workpiece-Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine depth 3580 mm

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Swing diameter: 200 mm, Turning length: 400 mm, Max. turning diameter: 420 mm, Bar capacity: 60 mm, Max. chuck diameter: 160 mm, Spindle speed: 5,000 rpm, Turrets: 2, Stations: 2x14, Rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions X/Y/Z: approx. 7,500 mm / 2,100 mm / 2,100 mm, Weight: approx. 4,500 kg. Documentation available. On-site inspection possible. Gusdpfxou T Rgke Aiyob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 27.000 h, Fungsionalitas: berfungsi sepenuhnya, Pompa + Filter + Pendingin No. 06 Motorisasi Aksial No. 13 Motorisasi Radial Pemegang alat Pemegang bor Penunjuk tengah: Bushing pengisi + Tabung: Ø51 / Ø46 / Ø41 No. 02 set bushing pengisi baru MBL No. 02 batang optik direkondisi oleh HEIDENHAIN 1 Soket Baluff Cakar untuk gantry Godpfx Aijy Rlbzjyoub Berbagai sensor, proximity, kabel Sabuk untuk motorisasi: 6 pcs Set bushing anti-getar untuk pengisi MBL

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 6.000 rpm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 32.000 W, produsen pengendali: SIEMENS, model controller: C200-sl, jumlah sumbu: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning operations. This machine is ideal for precision and efficiency in metalworking, making it a valuable addition for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for more information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Machine Advantages • Control: Based on Sinumerik 840D solutionline (sl) with Sinamics S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operator interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 inside the control panel). Network capability for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (Profisafe). • Turret mechanism: Hydraulic locking, AC motor with helical gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-grooves for increased repeatability. Driven tools possible at every station (can only rotate in the working position). • Cooling unit: 13 kW for hydraulics, spindles, and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, glycol 25%). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter tank, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Bar feeder interface: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with selector for finished parts/remnants. Additional Information Control Unit Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Rated power: 54kW Connected load: 65kVA Rated current: 94A Max. main fuse: 100A Guodpfjyyuvtjx Aiyeb Main Drive Main spindle and counter spindle Spindle head mounting: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Clamping pressure min./max.: 8/80 bar Piston surface pressure: 57cm² Piston area, clamping: 57cm² Max. clamping force: 45,600 N Max. draw force: 45,600 N C-Axis: Drive: Spindle hollow-shaft motor; Angle measuring system directly on the spindle Positional dispersion (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Head Tool Carrier 1 X-axis travel: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5,000N Z-axis travel: 320mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5,000N Y-axis travel: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5,000N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5,000N Z-axis travel: 550mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5,000N Y-axis travel: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5,000N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Kondisi: bekas, Tahun pembuatan: 2017, INDEX - C200 - 2017 - sistem Sinumerik 840D SolutionLine - lubang spindle 65 mm - pendinginan dengan air Gusdpfxeyzkp Es Aiyeb - jam kerja sesuai foto - kondisi bekas sesuai foto - dalam keadaan terpasang daya, dapat diuji

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 28.742 h, Fungsionalitas: berfungsi sepenuhnya, saluran batang: 65 mm, FANUC Series 31i-Model A 3 turret Konveyor bagian Majalah Gedpfx Aoydmbujiysub Detail lebih lanjut atas permintaan

Kondisi: bekas, Tahun pembuatan: 2011, de-to-hu-1 Godeyuzfpspfx Aiysub

Kondisi: bekas, Tahun pembuatan: 2014, INDEX C200 CNC Lathe 3 Turret 2 Spindle Kontrol Fanuc: 31i-Model B Pemegang Motoris Aksial: 6 pcs Pemegang Motoris Radial: 13 pcs Pemegang Alat: 11 pcs Pemegang Boring Bar: 21 pcs Gujdpfxsxxm Hfj Aiyob Pin: 1 pcs Bushing & Sleeves Loader: Ø51/Ø46/Ø41 Bushing loader MBL baru: 2 set 2 skala optik direkondisi oleh HEIDENHAIN 1 Box Lengan Portal soket Balluff dengan berbagai sensor, saklar induksi, dan kabel Belt motoris: 6 pcs Set bushing anti-vibrasi untuk loader MBL Waktu operasi: On time: 37.946 Jam hidraulik: 37.500 Waktu produksi: 26.500 Dengan MBL Bar Feeder

Kondisi: bekas, Tahun pembuatan: 2022, INDEX - C200 - 2022 - kondisi sedikit digunakan seperti terlihat pada foto - dalam keadaan terhubung listrik, dapat diuji Gusdoyl Nnaepfx Aiyob

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Maximum turning diameter: 200 mm, maximum turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Gsdpfstdwwqsx Aiyjub

Kondisi: bekas, Tahun pembuatan: 2015, en-GB/Technical Details: Turning diameter: 65 mm Turning length: 120 mm Control: Index C200-4D SL Z-axis main spindle travel: 390 mm Z-axis sub spindle travel: 390 mm X-axis sub spindle travel: 600 mm Y1-axis travel: ± 80 mm Y2-axis travel: ± 80 mm X-axis rapid traverse: 45 m/min Y-axis rapid traverse: 15 m/min Z-axis rapid traverse: 45 m/min Spindle 1 speed: 5,000 rpm Spindle 1 power: 35.5/27.5 kW Spindle 1 torque: 170 /125 Nm Spindle 2 speed: 5,000 rpm Spindle 2 power: 35.5/27.5 kW Spindle 2 torque: 170/125 Nm C-axis: 0.00014° Bar capacity: 65 mm Spindle nose: AD 140 Spindle bore: 85 mm Milling spindle 1 speed: 18,000 rpm Milling spindle 1 power: 11 kW Milling spindle 1 torque: 19 Nm Milling spindle 2 speed: 18,000 rpm Milling spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axis swivel range: 230° B-axis torque: 440 Nm B-axis resolution: 0.001° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 magazine for static tools: 6 x VDI 25 Internal coolant supply: Knoll 80 bar / Ecofluid Machine weight approx.: 16.3 t Space requirement approx.: 3.73 x 2.92 x 2.58 m Accessories: Chip conveyor Spindle 1 power chuck SMW HFKN 165-46 mm Spindle 2 power chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck sub spindle Hainbuch Spanntop Bar loader interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main and sub spindle Conveyor belt for parts removal Oil mist separator Büchel The Index R 200 is a high-precision multifunction turning and milling centre. It is equipped with 2 turning spindles and 2 milling spindles. Full 5-axis capability is installed for both milling spindles. The Z-axes are integrated in the turning spindle units. The X2-axis is located in the sub spindle unit. Milling spindle 1 features X/Y/B axes in the head. Milling spindle 2 features Y/B axes in the head. Each milling spindle is equipped with a full-featured B (swivel) axis with a 230° range. The machine is equipped with a short bar loader IRCO and a parts catcher. Parts to be caught may have the following maximum dimensions: Diameter: 65 mm Length: 120 mm Weight: 5 kg Remnant length: 200 mm All linear axes are equipped with glass scale encoders. Gusdpfxjyxpade Aiyeb Coolant supply is provided via the main and sub spindles, as well as through the sub spindle. Tool breakage monitoring is available from a drill diameter of 1 mm. All existing tool holders are included with the machine. It is in excellent condition!

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2005, Fungsionalitas: tidak berfungsi, panjang pembubutan: 600 mm, diameter pembubutan: 140 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 110 mm, jarak gerak sumbu Z: 360 mm, model controller: Siemens 840 D PowerLine, Hydraulic unit, main and sub-spindle defective TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Gjdpjyxgc Njfx Aiyoub Rapid traverse (X / Y / Z-axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar stock diameter: 65 mm Spindle bearing diameter: 110 mm Sub-spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar stock diameter: 65 mm Travel X-axis: 150 mm Travel Y-axis: 600 mm Spindle bearing diameter: 110 mm Turret Number: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 Number of driven tool stations: 3 x 12 Max. speed of driven tools: 6,000 rpm Drive power of driven tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Space requirements: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm 2 B-correction axes (+/-1°) Chip conveyor Parts catcher Tool breakage monitoring Bar feeder: IRCO Profimat 65.6

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 92.000 h, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It offers a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret featuring 12 stations and driven tools on both turret 1 and 2. If you are looking for top-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we have for sale. Contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in the CAM programming system • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Sub-spindle coolant flushing (electrically actuated shut-off valve) • Foot switch • Turret (12 stations) upper and lower • Driven tools on turret 1 and 2 • Control function "Synchronous tailstock" for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant supply on slides 1 and 2 with solenoid valve • Coolant washdown gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Gantry unloading device with actuated gripper, NC-controlled • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion application) • High pressure pump 80 bar Gusdpfeylw Dcex Aiysb • Workpiece clamping: • Collet chuck for pull rod, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large selection of driven tool holders and spare parts inventory

Kondisi: baik (bekas), Tahun pembuatan: 2006, Tahun pembuatan 1998 hingga 2006 Dari lokasi Gjdpfx Aoypltgeiysub

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Kontrol: SIEMENS Lubang spindel: 65 mm Panjang pembubutan: 660 mm Maks. putaran: 6.000 rpm Spindel lawan Z= 700 mm PEMEGANG ALAT 1 dengan spindle milling Spindle milling: 7.200 rpm Sumbu-B 360° 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 230 / Y= ±65 / Z= 845 Gsdpfxsyi Uk Is Aiyeub PEMEGANG ALAT 2 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 140 / Y= ±45 / Z= 810 Konveyor serbuk (chip conveyor) Filter Bar feeder INDEX MBL

Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm Turning length: 400 mm Control: Siemens Type: C 200-4 840 C Spindle bore: 65 mm Tool changer: 2 x 14 positions Driven tools: 2 x turret Machine weight: approx. 4 t Gujdpfxeyqvygj Aiyob Main and sub spindle 3-jaw chuck with multiple jaws Hainbuch collet chucks Numerous tool holders Various driven tools Bar feeder "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc., see photo The technical data are as provided by the manufacturer/operator and are therefore not binding for us. We reserve the right to prior sale; only our terms and conditions of business and sale apply. About us: - Over 400 of our own machines in stock - More than 15,000 m² storage space, crane capacity 70 t - Over 10,000 accessory items for your workshop If you wish to sell machines, production lines, or your business, please contact us. You will find further offers on our website. Viewings are possible by prior arrangement. We look forward to your visit. Your Markus Hirsch Team

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de_hu_1 Guodpfx Aijyfv Nkeyob

Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm Turning length: 400 mm Control: SIEMENS SINUMERIC 840 C Total power requirement: 40 kW Machine weight: approx. 6,500 kg Space requirement: approx. m INDEX CNC Lathe with 2 turrets, bar loading magazine, workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture: 1998 # 810 728 _____ Bar capacity for bar machining: approx. 42 mm Workpiece swing diameter: approx. 400 mm Turning diameter for chuck work: 200 mm Turning length / distance between centers: approx. 400 mm Turret slide travels Z1 (longitudinal) / X1 (cross): 400 / 120 mm Turret slide travels Z2 (longitudinal) / X2 (cross): 400 / 105 mm Feed force for Z/X axes: 15 Nm Rapid traverse speed of tool carriers 1 and 2: 22.5 m/min Turret tool stations / max. speed: 14 x VDI 30 / 6,000 rpm Spindle speeds / driven tool speeds up to max.: 7,000 rpm Max. spindle torque: 95 Nm Spindle drive / driven tool drive: 20 / 5.5 kW Gujdpfxjt Hw Rks Aiyob Total drive power: approx. 40 kW - 400 V - 50 Hz Weight: approx. 6,500 kg Accessories / Special equipment: • SIEMENS CNC 7-axis path control type SINUMERIC 840 C for the following axes: Turret 1 and Turret 2, C-axis, counter spindle axis and C-axis for the counter spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand control device • C-axis for the main spindle with automatic spindle indexing and positioning system • 1 counter spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loading magazine type MBL for bars up to 3 m length • Hydraulic chucking system on main and counter spindle • 2 x tool turrets with 14 stations for VDI 30 tool holders and 14 powered tool stations for milling and drilling operations, various tool holders, drill breakage control in the chuck area, ideal for cross drilling (!) • Workpiece handling system type WHU with linear gripper but without stacking system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system • Powered angle tools, approx. 20 pcs. total, etc. Condition: Good to very good – can be demonstrated under power Delivery: Ex stock – as inspected Payment: Net – payment due upon receipt of invoice.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 720052, panjang pembubutan: 600 mm, diameter pembubutan: 140 mm, saluran batang: 65 mm, model controller: Siemens 840 D PowerLine, jarak antara spindel: 615 mm, tech-details_001 Gusdpfx Aoxg Im Aoiysb

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm Gujdpjv Ig Avefx Aiysb - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS 32 C Gjdpfx Aeuhaqbeiyoub

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled Gujdeuhauyepfx Aiyob - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: bekas, en-1 Gsdpfx Aiouhantjyoub

Kondisi: baik (bekas), Index HBF Gjdpsd Tx A Tofx Aiyjub Hydraulic pump and oil pump Bar feeder

Kondisi: bekas, Tahun pembuatan: 2013, 1 Gusdpfx Aieyuzfveyob