Beli Index Ms 42 C bekas (144)

Kondisi: baik (bekas), Index HBF Itodpfx Asd Tx A Tsaher Hydraulic pump and oil pump Bar feeder

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), CNC-6-Spindel-Drehmaschine-Index-defekt Isdpfx Aaex E Ad Aehotr

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, panjang umpan sumbu Z: 100 mm, jumlah spindel: 6, kecepatan spindel (maks.): 6.300 rpm, Diameter batang (maks.): 32 mm, lebar total: 1.716 mm, panjang total: 3.313 mm, tinggi total: 3.015 mm, panjang pembubutan: 100 mm, diameter pembubutan: 32 mm, daya: 80 kW (108,77 hp), jarak pergerakan sumbu X: 68 mm, jarak lintasan sumbu Y: 32 mm, jarak gerak sumbu Z: 100 mm, pergerakan cepat sumbu Z: 12 m/menit, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, 6 spindle NCU ganda lima spindle sudah diganti perpanjangan stroke Kontrol kerusakan alat Artis Tekanan tinggi Pemadam api Kraft & Bauer Knoll VRF 500 Itsdpfx Aaoxwun Iehjr Pietro Cucchi - majalah pemuatan Berbagai aksesori

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS 32 C Itsdpsuhaqbsfx Aahsr

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm Ijdeuhauyspfx Aahetr - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: bekas, en-1 Itedpfx Aaouhantohjr

Kondisi: sangat baik (bekas), Index MS42C Bar guide HBF Iedpfjfdr R Usx Aahstr Oil distributor Flaps with clamping screws

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS42C Itjdpsxzu Trsfx Aahor

Kondisi: baik (bekas), Tahun pembuatan: 1997, panjang pemakanan sumbu X: 70 mm, panjang umpan sumbu Z: 140 mm, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, jenis arus masuk: tiga fasa, jumlah spindel: 6, kecepatan spindel (maks.): 5.000 rpm, lubang collet: 42 mm, Diameter batang (maks.): 42 mm, daya: 72 kW (97,89 hp), berat keseluruhan: 10.500 kg, Perlengkapan: dokumentasi / manual, bg Isdpfx Aslp Nr Asahstr

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS42C Itedpfx Aaoxpi Iajhjr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 45.000 h, Allgemeine Daten Maße Breite: 1.910 mm Maße Tiefe: 3.580 mm Maße Höhe: 2.050 mm Maschinengewicht: 4.000 kg Steuerungseinheit Iedox D Snrspfx Aahetr Hersteller: INDEX Modell: C200-4 / C200-8 Zusätzliche Ausstattung Synchronvorrichtung für Gegenspindelbearbeitung Werkzeugträger 3 für Synchronspindel (Rückseitenbearbeitung) Zusätzliche Frässpindel Gewindefräsvorrichtung und Polygonbearbeitung Werkzeugwechsler ohne Greifer (6 Werkzeuge, HKS-50 B, KM40) Werkstückhandling WHU100 Dieses 5-Achs-Dreh-Fräszentrum Index G200 C wurde im Jahr 2000 hergestellt. Nutzen Sie die Gelegenheit, dieses Index G200 C Dreh-Fräszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsarten Drehen

Kondisi: baik (bekas), Tahun pembuatan: 2007, Images and description will be available shortly Itsdpfx Aajv S Hmpohor

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, jumlah spindel: 6, Diameter batang (maks.): 22 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, 8-spindle machine Double NCU Slide unit 1.1: X-axis and Z-axis NC-controlled Slide unit 1.2: X-axis and Z-axis NC-controlled Iedpfx Ajxur Srjahstr Slide unit 2.1: X-axis and Z-axis NC-controlled Slide unit 2.2: X-axis and Z-axis NC-controlled Slide unit 3.1: X-axis and Z-axis NC-controlled Slide unit 3.2: X-axis and Z-axis NC-controlled Slide unit 4.1: X-axis and Z-axis NC-controlled Slide unit 4.2: X-axis and Z-axis NC-controlled Slide unit 5.1: X-axis and Z-axis NC-controlled Slide unit 5.2: X-axis and Z-axis NC-controlled Slide unit 6.1: X-axis and Z-axis NC-controlled Slide unit 6.2: X-axis and Z-axis NC-controlled Slide unit 7.1: X-axis and Z-axis NC-controlled Slide unit 7.2: Swivel axis and Z-axis NC-controlled Slide unit 7.3: X-axis NC-controlled, Z-axis fixed Slide unit 8.1: Swivel axis and Z-axis NC-controlled Slide unit 8.2: X-axis and Z-axis NC-controlled Slide unit 8.3: X-axis NC-controlled, Z-axis fixed Synchronization unit at position 7.2 Synchronization unit at position 8.1 Rear-side machining on positions 7.3 and 8.3 possible with three fixed and two driven positions Index loading magazine MBL228/3300 bundle loader Hinged belt chip conveyor Röhm three-jaw chuck for synchronizing spindle Workpiece conveyor at spindle position 7 Workpiece conveyor at spindle position 8 Fire extinguishing system Büchel coolant mist extraction system

Kondisi: bekas, Tahun pembuatan: 2024, de Iedpoxnrtcofx Aahetr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jam operasional: 50.000 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 42 mm, panjang pembubutan: 150 mm, diameter pembubutan: 42 mm, saluran batang: 42 mm, Mesin beroperasi di produksi — uji produksi langsung dapat diatur dengan perjanjian. Kondisi: Operasional dalam produksi. Pendingin: Saat ini menggunakan cairan pendingin berbahan dasar minyak; dapat diubah ke emulsi berbahan dasar air. Isdjw Smf Aspfx Aahjtr Aksesori: Termasuk banyak dudukan alat dan alat berputar, feeder batang, konveyor serpihan, C axis, suku cadang. Dokumentasi: Semua buku dan manual disediakan. Mohon cantumkan atau minta: model/tipe kontrol, spesifikasi spindle, jam operasional, inventaris tool, harga yang diminta (per unit atau lot), serta lokasi/ketersediaan untuk inspeksi.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 34.044 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 270240, jumlah spindel: 6, Diameter batang (maks.): 22 mm, panjang batang: 3.000 mm, diameter spindel: 40 mm, RINCIAN TEKNIS Jumlah spindel: 6 Diameter tembus spindel: 40 mm Diameter batang: 22 mm Panjang pengumpan batang: 4,70 m Panjang batang: 3,0 m RINCIAN MESIN Tegangan nominal: 400 V Daya nominal: 60 kW Daya terpasang: 71 kVA Pengaman maksimum: 125 A Tegangan jaringan: 400 V Frekuensi listrik: 50 Hz Tegangan kontrol: 24 V DC Ijdow T Rygjpfx Aahstr Waktu menyala: 50.134 jam Hidrolik aktif: 43.972 jam Waktu operasi: 38.809 jam Produksi: 34.044 jam PERLENGKAPAN - Seluruh suplai energi untuk keenam spindel utama diganti pada April 2025 - Single-NCU tanpa PCU - Pengumpan batang Iemca SIR MS22 P 33 (tahun pembuatan: 2015)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 720052, panjang pembubutan: 600 mm, diameter pembubutan: 140 mm, saluran batang: 65 mm, model controller: Siemens 840 D PowerLine, jarak antara spindel: 615 mm, tech-details_001 Itedpfxjxg Im Aj Aaher

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Gambar dan deskripsi akan segera menyusul. Itedpfxov S Hmco Aahjr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, nomor mesin/kendaraan: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Iodpfov Raatjx Aahotr Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 – 5,020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-off unit - Workpiece discharge conveyor - Bar feeder: IEMCA type PRA 40/35/P

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm Ijdpfxsuhatpo Aahotr - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC control: SIEMENS 840D - Counter spindle - Polygon turning unit: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer.

Kondisi: bekas, Tahun pembuatan: 1998, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5,020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Polygon machining attachment - Thread cutting device - Hydraulic pick-off device Iodpfx Asvh Naqeahstr - Workpiece discharge conveyor - Bar loading magazine manufactured by PIETRO CUCCHI, type AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant system

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm Itedjuhatcjpfx Aahor - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - SIEMENS 840D CNC control - Counter-spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Swarf conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. To be inspected by a qualified company on the buyer’s side.

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter-spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - Siemens 840D CNC control - Counter-spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P Iedpfx Aeuhar Soahstr - KNOLL coolant tank * with high-pressure pump - KNOLL chip conveyor - Cooling unit - Parts removal system - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 18 mm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: Z axis CNC controlled Itodpfeuhan Tex Aahjr - Slide unit 2.1: Z axis CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.3 EQUIPMENT - SIEMENS 840D CNC control - Counter spindle - IEMCA SIR MS18/33 P bar feeder - KNOLL coolant tank * with high-pressure pump - KNOLL chip conveyor - Parts catcher - Parts ejector

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Maximum diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled Ijdpfxsuhar Eo Aahetr - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygon turning attachment: slide unit 5.1 - Bar loader: IEMCA SIR MS32/38 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company chosen by the buyer.