Beli Index G 200 bekas (158)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
INDEX
Iklan kecil
Jerman
11.248 km
Index G 200 RATIO LINE
IndexG 200 RATIO LINE
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 92.000 h, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It offers a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret featuring 12 stations and driven tools on both turret 1 and 2. If you are looking for top-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we have for sale. Contact us for further details.
• C-axis on main and sub-spindle
• Thread cutting without compensating chuck
• Electronic shaft
• Additional V24 RS232 interface in the control cabinet
• Send/Trace function
• MDE interface (machine on, machine running, part counter)
• Marposs (Brankamp) collision monitoring CMS100
• 3D machine model for kinematic simulation in the CAM programming system
• Control cabinet cooling unit
• Main spindle D65
• Sub-spindle D60
• Sub-spindle coolant flushing (electrically actuated shut-off valve)
• Foot switch
Nwsdoylw Dcspfx Am Aof
• Turret (12 stations) upper and lower
• Driven tools on turret 1 and 2
• Control function "Synchronous tailstock" for turret 2
• Y-axis 120 mm
• Automatic sliding door (hydraulic)
• Coolant pump 80 l / 8 bar
• High-pressure coolant supply on slides 1 and 2 with solenoid valve
• Coolant washdown gun
• Preparation for extraction and filter system connection
• Operating hours approx. 92,000 h
Additional equipment
• Gantry unloading device with actuated gripper, NC-controlled
• Gripper fingers D4-45 mm and D40-65 mm
• Indexed conveyor belt
• UNIMAG interface
• Chip conveyor (hinged belt), discharge height 1250 mm
• Vacuum rotary filter KNOLL (emulsion application)
• High pressure pump 80 bar
• Workpiece clamping:
• Collet chuck for pull rod, HAINBUCH (main and sub-spindle)
• Power chuck D210 with quick jaw change, Schunk (main and sub-spindle)
• Stop device
• Optional: large selection of driven tool holders and spare parts inventory
Iklan kecil
Lüdenscheid
11.211 km
Pusat pembubutan dan milling CNC
INDEXG 200
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Kontrol: SIEMENS
Lubang spindel: 65 mm
Panjang pembubutan: 660 mm
Maks. putaran: 6.000 rpm
Spindel lawan Z= 700 mm
Nwedpfx Amsyi Uk Ie Aef
PEMEGANG ALAT 1 dengan spindle milling
Spindle milling: 7.200 rpm
Sumbu-B 360°
14 stasiun dengan alat bertenaga
Kecepatan alat: 7.200 rpm
Perjalanan sumbu: X= 230 / Y= ±65 / Z= 845
PEMEGANG ALAT 2
14 stasiun dengan alat bertenaga
Kecepatan alat: 7.200 rpm
Perjalanan sumbu: X= 140 / Y= ±45 / Z= 810
Konveyor serbuk (chip conveyor)
Filter
Bar feeder INDEX MBL
Iklan kecil
Dorsten
11.249 km
Mesin bubut CNC
INDEXG 200
Hubungi
Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm
Turning length: 400 mm
Control: Siemens
Type: C 200-4 840 C
Spindle bore: 65 mm
Tool changer: 2 x 14 positions
Driven tools: 2 x turret
Machine weight: approx. 4 t
Main and sub spindle
Nedpjyqvygsfx Am Aswf
3-jaw chuck with multiple jaws
Hainbuch collet chucks
Numerous tool holders
Various driven tools
Bar feeder "Index MBL"
Chip conveyor with coolant unit
Complete set of spindle reducers
etc., see photo
The technical data are as provided by the manufacturer/operator and are therefore not binding for us. We reserve the right to prior sale; only our terms and conditions of business and sale apply.
About us:
- Over 400 of our own machines in stock
- More than 15,000 m² storage space, crane capacity 70 t
- Over 10,000 accessory items for your workshop
If you wish to sell machines, production lines, or your business, please contact us.
You will find further offers on our website.
Viewings are possible by prior arrangement.
We look forward to your visit.
Your Markus Hirsch Team

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Jerman
11.023 km
Mesin bubut CNC
IndexG 200 Ratioline
Hubungi
Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de_hu_1
Nwodpfxeyfv Nkj Am Ajf
Iklan kecil
Metzingen
11.157 km
Mesin bubut CNC
INDEXG 200
Hubungi
Kondisi: bekas, Tahun pembuatan: 1998, Swing diameter: 200 mm
Turning length: 400 mm
Control: SIEMENS SINUMERIC 840 C
Total power requirement: 40 kW
Machine weight: approx. 6,500 kg
Space requirement: approx. m
INDEX CNC Lathe with 2 turrets, bar loading magazine, workpiece handling system, and SIEMENS CNC control type 840 C
Type G 200, year of manufacture: 1998
# 810 728
_____
Bar capacity for bar machining: approx. 42 mm
Workpiece swing diameter: approx. 400 mm
Turning diameter for chuck work: 200 mm
Turning length / distance between centers: approx. 400 mm
Nedpfxet Hw Rks Am Aewf
Turret slide travels Z1 (longitudinal) / X1 (cross): 400 / 120 mm
Turret slide travels Z2 (longitudinal) / X2 (cross): 400 / 105 mm
Feed force for Z/X axes: 15 Nm
Rapid traverse speed of tool carriers 1 and 2: 22.5 m/min
Turret tool stations / max. speed: 14 x VDI 30 / 6,000 rpm
Spindle speeds / driven tool speeds up to max.: 7,000 rpm
Max. spindle torque: 95 Nm
Spindle drive / driven tool drive: 20 / 5.5 kW
Total drive power: approx. 40 kW - 400 V - 50 Hz
Weight: approx. 6,500 kg
Accessories / Special equipment:
• SIEMENS CNC 7-axis path control type SINUMERIC 840 C for the following axes: Turret 1 and Turret 2, C-axis, counter spindle axis and C-axis for the counter spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand control device
• C-axis for the main spindle with automatic spindle indexing and positioning system
• 1 counter spindle with drive and C-axis, travel approx. 300 mm
• INDEX bar loading magazine type MBL for bars up to 3 m length
• Hydraulic chucking system on main and counter spindle
• 2 x tool turrets with 14 stations for VDI 30 tool holders and 14 powered tool stations for milling and drilling operations, various tool holders, drill breakage control in the chuck area, ideal for cross drilling (!)
• Workpiece handling system type WHU with linear gripper but without stacking system
• Mobile chip conveyor with coolant system, sliding door, fire extinguishing system
• Powered angle tools, approx. 20 pcs. total, etc.
Condition: Good to very good – can be demonstrated under power
Delivery: Ex stock – as inspected
Payment: Net – payment due upon receipt of invoice.
Iklan kecil
Döbeln
10.837 km
Pusat penggilingan balik CNC
INDEXG 200
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 510864, panjang pembubutan: 200 mm, CNC turning machine INDEX G200
Nwjdsulhinepfx Am Aef
Completely overhauled: 2017
Machine number: 510864
Max. turning length: 200 mm
Bar feeder INDEX MBL
Main spindle
Collet chuck through-hole: 42 mm
Spindle diameter at front bearing: 85 mm
Spindle nose ISO702/1: 5
Chuck diameter: 140/160 mm
Max. nominal turning diameter: 200 mm
Max. swing diameter: 420 mm
Power Pmax 100%: 7.5/13/20 kW
Torque Mdmax 100%: 35/61/95 Nm
Spindle speed: 6300 rpm
Counter spindle
Collet chuck through-hole: 42 mm
Spindle diameter at front bearing: 85 mm
Spindle nose ISO702/1: 5
Chuck diameter: 140/160 mm
Power Pmax 100%: 7.5/13 kW
Torque Mdmax 100%: 35/61 Nm
Spindle speed: 6300 rpm
Min. distance collet: 15 mm
Longitudinal travel: 445 mm
Rapid traverse: 22.5 m/min
Cross slide 1 XZ (top)
XZ: 120 x 400 mm
Feed force: 5000 N
Cross slide 2 (bottom)
XZ: 105 x 400 mm
Feed force: 5000 N
Further information available on request!
Iklan kecil
Lipie
10.446 km
Pusat pembubutan dan penggilingan cnc
INDEXG200
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Mesin dalam kondisi sangat baik. Mesin telah beroperasi hingga akhir dan sekarang berada di gudang, tidak terhubung ke listrik.
Nodpfxowq Rwns Am Aswf
Mesin 100% lengkap.
Tersedia konveyor suku cadang, konveyor serbuk logam.
Diameter lubang spindle 42 mm
2x chuck 3 rahang 160 mm
2x chuck collet Hainbuch 42 mm
Iklan kecil
Komorniki
10.571 km
Pusat pembubutan dan milling CNC
INDEXG200
Hubungi
Kondisi: bekas, Tahun pembuatan: 1996, Tipe: Mesin Bubut Multispindel
Nwedeyn Hmxopfx Am Aof
Merek: Index
Model: G200
Tahun Pembuatan: 1996
Kondisi: Bekas
Jumlah: 1
Iklan kecil
Jerman
11.248 km
Index G200 C
IndexG200 C
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 22.000 W, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling centre, Index G200 C, was manufactured in 2000. Take advantage of the opportunity to acquire this Index G200 C turning and milling centre. Contact us for further information.
Additional Equipment
• Synchronisation device for sub-spindle machining
• Tool carrier 3 for sub-spindle (backside machining)
• Additional milling spindle
• Thread milling and polygon turning device
• Tool changer without gripper (6 tools, HKS-50 B, KM40)
• Workpiece handling WHU100
• With C-axis
• No driven tools
Machine Advantages
Technical Advantages
• Footprint (without bar feeder): 3580 x 3108 mm
• Control unit: Resolution: 0.001 mm (input/output/correction)
• Extensive travel with multi-axis configuration
• High precision with 0.001 mm resolution in numerical control
• Versatile expansion steps and supplementary equipment for enhanced functionality
Additional Information
Motion Cross Slide 1 (top) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotating): 360° swivel range, angle increment 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s
Cross Slide 2 (bottom) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm
Turret right: X-axis: Travel 120 mm Z-axis: Travel 400 mm
Tailstock centre distance: 400 mm
Max. thrust: 5500 N
Drive: Hydraulic or electric
Media
Power supply: 400 V, 50/60 Hz
Connected load: 20-45 kVA
Current consumption: 35-80 A
Nsdpfx Aoyailzsm Aowf
Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Filling capacity: 70 litres
Coolant system: Pump output (switchable): 20 l/min @ 18 bar / 50 l/min @ 3 bar / 60 l/min @ 5-7 bar Filling capacity: approx. 230 litres
Chip conveyor: Hinged belt or scraper conveyor
Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper
Sub-spindle: D140 external mount (only pull tension allowed for collet and chuck clamping)
1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm
Spindle diameter at front bearing: 75 mm (30 mm bore) / 85 mm (42 mm) / 100 mm (60 and 65 mm)
Max. speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm)
Spindle nose: ISO 702/1 (size 4 or 5)
Bar diameter (workpiece-Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm)
Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm)
Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm)
Dimensions
Machine depth 3580 mm
Iklan kecil
Jerman
11.023 km
Mesin bubut CNC
IndexG200
Hubungi
Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), d0d942de
Nwodpfx Amjym Dgme Aef
Iklan kecil
Jerman
11.023 km
Mesin bubut CNC
INDEXG200 YB Ratioline
Hubungi
Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Maximum speed range: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14 stations, Siemens control. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar feeder. Completely overhauled in 2016.
Nedpfx Ametdwwme Aowf
Iklan kecil
Jerman
11.023 km
Mesin bubut CNC
INDEXG200 Compact
Hubungi
Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Maximum turning diameter: 200 mm, maximum turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg.
Nsdjtdwwqjpfx Am Aowf
Iklan kecil
Jerman
11.023 km
Pusat pembubutan dan penggilingan CNC
IndexG200 C
Hubungi
Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Swing diameter: 200 mm, Turning length: 400 mm, Max. turning diameter: 420 mm, Bar capacity: 60 mm, Max. chuck diameter: 160 mm, Spindle speed: 5,000 rpm, Turrets: 2, Stations: 2x14, Rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions X/Y/Z: approx. 7,500 mm / 2,100 mm / 2,100 mm, Weight: approx. 4,500 kg. Documentation available. On-site inspection possible.
Nwjdpeu T Rgkefx Am Ajf
Iklan kecil
Contamine-sur-Arve
11.428 km
Mesin bubut otomatis CNC
INDEXG200
Hubungi
Kondisi: bekas, TECHNICAL DATA
- Number of axes: 7
- Number of spindles: 2
- Number of turrets: 1
MAIN SPINDLE
- Spindle nose: A2-5
- Spindle drive power: 22 kW
- Spindle speed: 6000 rpm
- Max. bar diameter: 60 mm
- Max. machinable diameter: 200 mm
- Minimum C-axis resolution: 0.001°
SUB-SPINDLE
- Spindle nose: A2-5
- Spindle drive power: 22 kW
- Spindle speed: 6000 rpm
- Max. bar diameter: 60 mm
- Minimum C-axis resolution: 0.001°
- Z-axis travel: 445 mm
TURRET 1
Nwsdpfx Amou Hadhs Ajf
- Number of stations: 14
- Number of driven stations: 14
- X/Z travel: 105/400 mm
- Y travel: 120 mm
- B-axis stroke: +90/-270°
- Tool type: VDI 25
- Driven tool speed: 6000 rpm
- Driven tool power: 5.5 kW
ELECTRICAL SUPPLY
- Supply voltage: 400 V
WEIGHT AND DIMENSIONS
- Footprint: 4,975 X 2,890 mm
- Machine height: 2,050 mm
- Machine weight: 4,800 kg
EQUIPMENT/ACCESSORIES
- Control unit: Siemens 840C
- Coolant tank
* with high-pressure pump
- Chip conveyor
- Parts removal unit
- Parts belt conveyor
- Bar feeder: LNS
Iklan kecil
Jerman
11.193 km
Pusat pembubutan dan penggilingan CNC
INDEXR 200
Hubungi
Kondisi: bekas, Tahun pembuatan: 2015, en-GB/Technical Details:
Turning diameter: 65 mm
Turning length: 120 mm
Control: Index C200-4D SL
Z-axis main spindle travel: 390 mm
Z-axis sub spindle travel: 390 mm
X-axis sub spindle travel: 600 mm
Y1-axis travel: ± 80 mm
Y2-axis travel: ± 80 mm
X-axis rapid traverse: 45 m/min
Y-axis rapid traverse: 15 m/min
Z-axis rapid traverse: 45 m/min
Spindle 1 speed: 5,000 rpm
Spindle 1 power: 35.5/27.5 kW
Spindle 1 torque: 170 /125 Nm
Spindle 2 speed: 5,000 rpm
Spindle 2 power: 35.5/27.5 kW
Spindle 2 torque: 170/125 Nm
C-axis: 0.00014°
Bar capacity: 65 mm
Spindle nose: AD 140
Spindle bore: 85 mm
Milling spindle 1 speed: 18,000 rpm
Milling spindle 1 power: 11 kW
Milling spindle 1 torque: 19 Nm
Milling spindle 2 speed: 18,000 rpm
Milling spindle 2 power: 11 kW
Milling spindle 2 torque: 19 Nm
B-axis swivel range: 230°
B-axis torque: 440 Nm
B-axis resolution: 0.001°
Milling spindle 1 & 2 tool magazine: 80 HSK A40
Milling spindle 2 magazine for static tools: 6 x VDI 25
Internal coolant supply: Knoll 80 bar / Ecofluid
Machine weight approx.: 16.3 t
Space requirement approx.: 3.73 x 2.92 x 2.58 m
Accessories:
Chip conveyor
Spindle 1 power chuck SMW HFKN 165-46 mm
Spindle 2 power chuck SMW HFKN 165-46 mm
Collet chuck main spindle Hainbuch Spanntop
Collet chuck sub spindle Hainbuch Spanntop
Bar loader interface Unimag
Short bar loader IRCO ILS RBK 10016
Parts catcher for main and sub spindle
Conveyor belt for parts removal
Oil mist separator Büchel
The Index R 200 is a high-precision multifunction turning and milling centre. It is equipped with 2 turning spindles and 2 milling spindles.
Full 5-axis capability is installed for both milling spindles.
The Z-axes are integrated in the turning spindle units.
The X2-axis is located in the sub spindle unit.
Milling spindle 1 features X/Y/B axes in the head.
Milling spindle 2 features Y/B axes in the head.
Each milling spindle is equipped with a full-featured B (swivel) axis with a 230° range.
The machine is equipped with a short bar loader IRCO and a parts catcher.
Parts to be caught may have the following maximum dimensions:
Diameter: 65 mm
Njdpfoyxpadjx Am Aewf
Length: 120 mm
Weight: 5 kg
Remnant length: 200 mm
All linear axes are equipped with glass scale encoders.
Coolant supply is provided via the main and sub spindles, as well as through the sub spindle.
Tool breakage monitoring is available from a drill diameter of 1 mm.
All existing tool holders are included with the machine.
It is in excellent condition!
Iklan kecil
Malhostovice
10.623 km
Pusat pembubutan dan milling CNC
INDEXG 300
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, panjang pembubutan: 710 mm, Karakteristik:
Sistem kendali: Siemens
Panjang pembubutan maksimum: 710 mm
Nsdpeyxrczofx Am Ajwf
Diameter pembubutan maksimum: 270 mm
Lelang
Lelang telah berakhir
Baden-Württemberg
11.115 km
Mesin bubut CNC
INDEXG 300
Tahun pembuatan: 2005, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 200 mm, jarak gerak sumbu Z: 500 mm, model controller: SIEMENS SINUMERIK, berat keseluruhan: 8.000 kg, panjang pembubutan: 800 mm, nomor mesin/kendaraan: 500571, Perlengkapan: konveyor serpihan, 1
Nwedpfx Ajynhd Som Aof
Iklan kecil
OIching
11.014 km
Pusat penggilingan balik CNC
IndexR 200
Hubungi
Kondisi: bekas, EN-001
Nedpfx Ajvxmy Nsm Aewf
Lelang
Lelang telah berakhir
Bern
11.335 km
Pusat pembubutan dan milling CNC
INDEXG 160
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 460045, kecepatan spindel (maks.): 5.000 rpm, berat keseluruhan: 7.500 kg, model controller: SIEMENS SINUMERIK 840D, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS
Revolver
Jumlah spindel: 2
Jumlah revolver: 3
Jumlah posisi revolver 1: 10
Jumlah posisi revolver 2: 10
Tipe holder alat: VDI 25
Kepala revolver bawah
Jumlah posisi: 10
Kecepatan putar: 6.000 rpm
Daya alat berputar: 8 kW
Spindel utama
Poros C (resolusi): 0,001°
Kecepatan spindel maks.: 5.000 rpm
Daya spindel: 27 kW
RINCIAN MESIN
Kontrol: SIEMENS SINUMERIK 840D
Nedpfx Aoyhn Nzom Ajwf
Sambungan: 50 Hz 3x 400 V
Kebutuhan daya total: 43 kW
Dimensi & Berat
Dimensi (P x L x T): 3.200 x 2.100 x 2.100 mm
Berat mesin: 7.500 kg
PERLENGKAPAN
Konveyor serpihan
Pedal kaki
Iklan kecil
Oelde
11.164 km
Pusat pembubutan dan penggilingan CNC
INDEXG 250
Hubungi
Kondisi: bekas, Tahun pembuatan: 2012, Swing diameter 560 mm
Turning length 800 mm
Control system C200-4D Siemens 840 D
Spindle nose 8 DIN 55026/55021 ISO 7027/1
Bar capacity 90 mm
Spindle diameter at front bearing 140 mm
Spindle speed range ~ 3,500 rpm
Drive power - spindle motor 100% / 40%: 43 / 57 kW
Torque 275 / 363 Nm
Indexing 2.5°
C-axis 0.001°
Number of turrets 1
Number of tool stations 12 positions
Speed range - driven tool stations ~ 6,000 rpm
Drive power - driven tool stations 11 kW
Tool holder 40 x 63 mm DIN 69880
Torque 21.5 Nm
Travel - X axis 300 mm
Travel - Z axis 800 mm
Rapid traverse X/Z: 30 / 22.5 m/min
Feed force X: 7,200 N
Feed force Z: 9,000 N
Quill diameter 65 mm
Taper SK 30
Longitudinal travel 800 mm
Rapid traverse 10 m/min
Njdpfex Emp Njx Am Aewf
Total power requirement 51 kVA
Machine weight approx. 14 t
Space requirement approx. 7.3 x 4.0 x 2.6 m
CNC turning and milling center
INDEX - G 250
- Precision package for main or counter spindle
- Selected spindle housing
- Non-bearing clamping cylinder
- Precision balancing of work spindle, clamping cylinder, and collet clamping
Iklan kecil
Metzingen
11.157 km
Mesin bubut CNC
INDEXG 300
Hubungi
Kondisi: bekas, Tahun pembuatan: 1995, Here is the English technical translation optimized for platforms like Machineseeker and TruckScout24:
INDEX (Germany)
CNC Slant-Bed Lathe with Turret, Tailstock, and INDEX CNC Control C 200-4 (SIEMENS)
Model: G 300 Year: 1995 S/N: 5000 65
Technical Data:
- Max. Turning Diameter (with chuck): 300 mm
- Spindle Bore: approx. 90 mm
- Max. Workpiece Swing Diameter: approx. 400 (max. 590) mm
- Max. Turning Length / Centre Distance: approx. 710 mm
- Turret Slide Travel (Z axis / longitudinal): 710 mm
- Turret Slide Travel (X axis / cross): 140 mm
- Rapid Traverse Speed Tool Carrier: 20 m/min
- Turret with 12 tool positions for DIN 30 tool holders (approx. 40 different holders included as accessories)
- Feed Force X/Z Axis: 8/13 kN
- Stepless Spindle Speeds: up to 5,000 rpm
- Max. Spindle Torque at 100% ED: 275 Nm
- Spindle/Tool Drive Power: approx. 28 kW
- Total Power Requirement: approx. 40 kW, 400 V, 50 Hz
- Machine Weight: approx. 6,000 kg
Accessories / Special Features:
• SIEMENS CNC 3-Axis Path Control Type SINUMERIC 840 C or INDEX C 200-4 for the following axes: Turret 1 = X/Z as well as C-axis (spindle orientation). The control panel is mounted left and can be swiveled.
• Alignment and indexing device for the main spindle
Nsdpfxst Hw Suj Am Ajwf
• Forkhardt KFD-HS 250 hydraulic 3-jaw chuck fitted, with numerous jaws, max. speed 5,000 rpm
• INDEX turret with 12 tool positions for DIN 30 tooling; approx. 40 additional tool holders included as accessories. Turret stations are prepared for driven tools, drive via the indexing device motor.
• Hydraulic tailstock with eccentricity correction, quill 60 mm, operable via footswitch
• KNOLL mobile chip conveyor with coolant facility and high-pressure pump
• Front sliding door, otherwise complete enclosure. Oil skimmer
This machine is ideal for shaft machining as well as for chuck workpieces.
Very robust construction!
(Please let me know if you need adaptations for other platform requirements or an export summary.)
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Bühl
11.236 km
Pusat pembubutan dan penggilingan CNC
INDEXG 400
Hubungi
Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm
Nsdpfx Aet U R Hzjm Ajwf
Turning length: 1,250 mm
CNC Control: INDEX, C 200-4 D
Swing diameter: 630 mm
Travel X1: 320 mm
Travel Z1: 1,250 mm
Travel X2: 170 mm
Travel Z2: 1,250 mm
Travel X3: 320 mm
Travel Z3: 1,250 mm
Max. main spindle speed: 3,000 rpm
Main spindle drive: 53 kW
Spindle bore: 102 mm
Spindle nose: DIN 55026 size 11
Spindle torque: 675 Nm
Counter spindle - max. spindle speed: 3,000 rpm
Counter spindle drive: 53 kW
Counter spindle - spindle bore: 102 mm
Counter spindle - spindle nose: DIN 55026 size 11
Counter spindle - torque: 675 Nm
Counter spindle travel: 1,250 mm
Feed force X1: 14,000 N / Z1: 14,000 N
Rapid traverse X1: 20 m/min / Z1: 40 m/min
Feed force X2: 8,600 N / Z2: 14,000 N
Rapid traverse X2: 20 m/min / Z2: 40 m/min
Feed force X3: 14,000 N / Z3: 14,000 N
Rapid traverse X3: 20 m/min / Z3: 40 m/min
Number of turret positions, Turret 1 = 12
Number of turret positions, Turret 2 = 10
Number of turret positions, Turret 3 = 12
Number of driven tool stations: 12 / 10 / 12
Max. driven tool speed: 6,000 rpm
Torque (driven tools): 36 / 21 / 36 Nm
Tool shank DIN 69880
Tool holder Ø 40 x 63 mm
Total connected load: 120 kW
Machine weight approx.: 19 t
Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m
Accessories:
- HAINBUCH segmented collet chuck on main spindle
- HAINBUCH collet chuck, SPANNTOP SP on counter spindle
- Various tool holders (including for driven tools)
- Chip conveyor
- Coolant system
Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.
Iklan kecil
Contamine-sur-Arve
11.428 km
Pusat pembubutan/penggilingan
INDEXR 200
Hubungi
Kondisi: bekas, TECHNICAL SPECIFICATIONS
- Number of axes: 10
- Number of spindles: 2
MAIN SPINDLE
- Spindle drive power: 24 kW
- Spindle speed: 5,000 rpm
- Max. bar diameter: 65 mm
- Min. C-axis resolution: 0.001°
SUB SPINDLE
- Spindle drive power: 24 kW
- Spindle speed: 5,000 rpm
- Max. bar diameter: 65 mm
- Min. C-axis resolution: 0.001°
- Travel: 390 / 600 mm
TURNING-MILLING SPINDLE
- X travel: 350 mm
- Y travel: ±80 mm
- B-axis stroke: 270°
- Min. B-axis resolution: 0.001°
- Tool type: HSK-T40
- Spindle speed: 18,000 rpm
- Spindle drive power: 11 kW
- Fixed tools on electrospindle for milling: 6 x VDI25
LOWER TURNING AND MILLING SPINDLE
- Y travel: ±80 mm
- B-axis stroke: 270°
- Min. B-axis resolution: 0.001°
- Tool type: HSK-T40
- Spindle speed: 18,000 rpm
- Spindle drive power: 11 kW
- Fixed tools on electrospindle for milling: 6 x VDI25
TOOL CHANGER
- Tool changer type: Bras charger
- Number of magazine tools: 80
- Tool change time: 4.5 sec
ELECTRICAL SUPPLY
- Supply voltage: 400 V
- Total power: 68 kW
WEIGHT AND DIMENSIONS
- Machine height: 2,500 mm
- Machine weight: 11,000 kg
MACHINE HOURS
- Spindle hours: 19,781 h
- Turning-milling spindle hours: 9,713 h
EQUIPMENT
Nsdpfx Aev Ig Avom Ajwf
- Control: Siemens Sinumerik 840D SL
- Coolant tank
* with high-pressure pump
* with paper filter
* internal coolant supply (IKZ)
- Chip conveyor
- Spindle cooling
- Parts removal
Iklan kecil
Jerman
11.248 km
Index G300 L YB
IndexG300 L YB
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 140 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 1.245 mm, daya motor spindle: 9.400 W, tinggi total: 2.100 mm, lebar total: 2.150 mm, berat keseluruhan: 8.330 kg, panjang produk (maks.): 7.250 mm, jumlah sumbu: 7, en
Nwsdpfx Asyyyy Dem Ajf
Iklan kecil
Jerman
11.248 km
Index C200
IndexC200
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 6.000 rpm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 32.000 W, produsen pengendali: SIEMENS, model controller: C200-sl, jumlah sumbu: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning operations. This machine is ideal for precision and efficiency in metalworking, making it a valuable addition for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for more information.
Additional Equipment
• Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control.
• Environmental data: Noise level: 73.8 dB(A)
Machine Advantages
Technical Machine Advantages
• Control: Based on Sinumerik 840D solutionline (sl) with Sinamics S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operator interface in German.
• Interfaces: 4x USB 2.0 (2 on the control panel, 2 inside the control panel). Network capability for NC data transfer (logical drives).
• Safety: Siemens Safety Integrated (Profisafe).
• Turret mechanism: Hydraulic locking, AC motor with helical gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm.
• Tool holder: Cylindrical shank D25x48 (DIN69880) with W-grooves for increased repeatability. Driven tools possible at every station (can only rotate in the working position).
• Cooling unit: 13 kW for hydraulics, spindles, and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, glycol 25%).
• Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter tank, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps.
• Bar feeder interface: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with selector for finished parts/remnants.
Additional Information
Control Unit
Operating voltage: 400V
Control voltage: 24V DC
Frequency: 50Hz
Rated power: 54kW
Connected load: 65kVA
Rated current: 94A
Max. main fuse: 100A
Main Drive
Main spindle and counter spindle
Spindle head mounting: OD 140mm, ID 85mm
Front bearing diameter: 110 mm
Max. torque (100%/40%): 125/170 Nm
Clamping pressure min./max.: 8/80 bar
Piston surface pressure: 57cm²
Piston area, clamping: 57cm²
Max. clamping force: 45,600 N
Max. draw force: 45,600 N
C-Axis:
Drive: Spindle hollow-shaft motor; Angle measuring system directly on the spindle
Positional dispersion (VDI/DGQ 3441): Psmax = 0.01 degrees
Turret Head
Tool Carrier 1
X-axis travel: 110mm
X-axis rapid traverse: 30m/min
X-axis acceleration: 9m/s²
X-axis feed force: 5,000N
Z-axis travel: 320mm
Z-axis rapid traverse: 50m/min
Z-axis acceleration: 9m/s²
Z-axis feed force: 5,000N
Y-axis travel: 100mm
Y-axis rapid traverse: 15m/min
Y-axis acceleration: 9m/s²
Y-axis feed force: 5,000N
Stations: 14 with cylindrical shank holder D25x48
Tool Carrier 2
X-axis travel: 110mm
Nwedpjyyuvtjfx Am Aef
X-axis rapid traverse: 30m/min
X-axis acceleration: 9m/s²
X-axis feed force: 5,000N
Z-axis travel: 550mm
Z-axis rapid traverse: 50m/min
Z-axis acceleration: 9m/s²
Z-axis feed force: 5,000N
Y-axis travel: 100mm
Y-axis rapid traverse: 15m/min
Y-axis acceleration: 9m/s²
Y-axis feed force: 5,000N
Stations: 14 with cylindrical shank holder D25x48
Tool Carrier 3
Kami memudahkan pencarian untuk Anda: "index g 200"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Index G 200 (158)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan











































































































































































































































