Beli International 1754 bekas (8.466)

Kondisi: bekas, nomor mesin/kendaraan: WDB9630041022xxxx, jarak tempuh: 415.000 km, Tahun pembuatan: 2018, Contact ATS Norway for more information. Please quote the reference number upon inquiry: 21273 Specifications: Year of manufacture: 2018 Mileage: approx. 415,000 km TÜV valid until: 05.08.2026 Wheelbase: 550 cm 4x2 354 HP Full air suspension Retarder Front and rear winch capacity: 5.5 or 6 tons (uncertain) Jige International Simplex GT5 body Underlift (wheel lift) Tyres (see pictures) Automatic transmission Remote control DAB radio Air conditioning Sleeper cab Video available Delivery by agreement Hnedpfx Aexatpioa Nog Description: 2018 MERCEDES-BENZ ACTROS 1935 4x2 recovery truck. The control unit has recently been overhauled. The owner is unsure if the winch capacity is 5.5 or 6 tons. Video available. Delivery by agreement. Work to be performed: - Replace EGR valve (due to leakage) - Replace crankcase ventilation - Replace charge air hoses (burnt oil residues) - Replace right rear taillight - Replace right contour light on the sun visor - Replace white/red marker lights at the rear on both sides - Replace right side marker light - Replace parking brake switch - Replace battery Km: 415,000 HP: 353 TÜV: Yes EU-approved until: 05.08.2026 Unladen weight: 11,540 Total weight: 7,385 Payload: 7,385 Width: 254 Length: 978 Euro standard: 6 Model: ACTROS 1935 4x2 recovery vehicle. Newly overhauled steering unit. SEE VIDEO

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.806 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2022, panjang total: 13.400 mm, lebar total: 2.460 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2022, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 2.265 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 810D Powerline, tinggi total: 2.650 mm, beban meja: 600 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, en Hnjdpex D D Htjfx Aa Nsg

Kondisi: sangat baik (bekas), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell material testing machine designed for professional tensile and compression testing of materials and components. This machine is suitable for metals, plastics, rubber, and many other materials, and is typically used in laboratories, quality assurance, research, and education. Control is via PC with Zwick/Roell testXpert III software (media & documentation included). Hodpsx Up Igefx Aa Nsng Technical data: Nominal test force: 20 kN Test direction: tension & compression Mains supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (from documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Test direction: tension & compression Max. test frequency: 0.5 Hz Traverse: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Total height: approx. 1,545 – 2,114 mm (depending on traverse position) Total width: approx. 856 mm Total depth: approx. 650 mm Test area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical equipment Electrical Data Mains supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug type: Schuko (CEE 7) Measuring & Control Electronics Internal data acquisition: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection: IP32 Important notice: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC – see photos for condition) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (data media) Original operating and technical documentation Assorted connection and interface cables (Changes and errors in technical data and specifications reserved!) Further questions can be answered by phone.

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M303004, panjang pembubutan: 780 mm, tinggi total: 2.700 mm, panjang total: 5.000 mm, lebar total: 2.700 mm, berat keseluruhan: 12.000 kg, produsen pengendali: FANUC, model controller: SERIES 18 i-TB, NAKAMURA-TOME WT-300 CNC Lathe - Operating Voltage: 200/220 V - Frequency: 50/60 Hz - Main Switch: 300 A - Transformer: 93.4 kVA - Max. Diameter Upper Side: 199 mm - Max. Diameter Lower Side: 270 mm - Distance Between Spindle Heads: max. 1,100 mm / min. 250 mm - Max. Bar Capacity: 102 mm (left side), 65 mm (right side) - Chuck Size Left Side: 305 mm, Right Side: 210 mm - Turret Force (X-Axis): X1: 11,000 N, X2: 11,000 N - Turret Force (Z-Axis): Z1: 9,000 N, Z2: 6,000 N - Turret Force (Y-Axis): 6,000 N - Travel X1: 152 mm, X2: 195 mm - Travel Z1 + Z2: 780 mm - Travel Y-Axis: ±40 mm - Travel B2-Axis: 850 mm - Spindle Speed: 2,500 rpm - Spindle Bore: 120 mm - Front Bearing Inner Diameter: 160 mm - Draw Tube Hole: 103 mm - Spindle Center Height: 1,228 mm Hnodpfox Tzp Tox Aa Nsg - Spindle Speed R: 4,500 rpm - Spindle Bore: 80 mm - Front Bearing Inner Diameter: 110 mm - Draw Tube Hole: 66 mm - Spindle Bearing: 2-point - C-axis - Rapid Traverse Speed: 600 rpm - Cutting Feed Rate: 1 – 4,800°/min - Upper Turret: 12-station turret - Total Number of Tool Stations: 24 - Number of Turret Positions: 24 - Turret Head Outside Diameter: 406 mm - Turret Thickness: 100 mm - Tool Clearance: 641 mm - Turret Clamping Force: 30 kN - Tool Dimensions: 20 and 25 mm - Boring Bar Mounting Hole Diameter: 25/32 mm - Lower Turret Type: 24-station turret - Turret Head Outside Diameter: 365 mm - Turret Thickness: 100 mm - Tool Clearance: 600 mm - Tool Dimensions: 20/25 mm - Driven Tool Spindle on Upper and Lower Turret - Spindle Speed: 3,600 rpm - Number of Spindle Speed Ranges: stepless - Number of Tool Positions: 12 - Tool Holder Types and Sizes: Longitudinal Holder: 20 mm, Cross Holder - Longitudinal Threading Holder: M3 – M10 - Cross Threading Holder: M3 – M10 - Cutting and Traverse Speed X1 and X2: 16,000 mm/min - Cutting and Traverse Speed Z1 and Z2: 27,000 mm/min - Cutting and Traverse Speed B2-Axis: 27,000 mm/min - Cutting and Traverse Speed Y-Axis: 6,000 mm/min - Cutting Feed Rate X1 and X2: 1 – 4,800 mm/min - Cutting Feed Rate Z1 and Z2 Axis: 1 – 4,800 mm/min - Cutting Feed Rate B-Axis: 1 – 4,800 mm/min - Cutting Feed Rate Y-Axis: 1 – 4,800 mm/min - Including the tool holders shown in the photos as well as both HAINBUCH collets in the main and sub-spindles - Also including chip conveyor and transformer - With documentation Attention: The item must be collected—binding date to be agreed—between 18 and 26 February 2026. FCA D-78087 Mönchweiler, loaded onto truck.

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 156.897 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6006285, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: Heidenhain TNC 426/430, berat benda kerja (maks.): 7 kg, lebar meja: 800 mm, panjang meja: 1.250 mm, beban meja: 1.200 kg, kecepatan rotasi (maks.): 18.000 rpm, berat keseluruhan: 12.000 kg, 1 Hnjdpsx Tqr Rsfx Aa Nsg

Kondisi: baru, kapasitas tangki bahan bakar: 100 l, Tahun pembuatan: 2024,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, 2900 jam kerja!!! Diesel-oil (1) -- Nafta (2) -- Listrik (3): listrik Tegangan: 3 x 380V - 50Hz Tekanan rendah (1) Tekanan tinggi (2) Sekrup (3): kompresor sekrup 12,75 bar Laju aliran udara: 18,3 m3/menit Daya masukan: 90kW Volume (L): 1500 L Hodpfexl Hxbjx Aa Njng

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 22.729 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, tinggi total: 2.650 mm, beban meja: 600 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, Pusat pemesinan vertikal 3-sumbu DMG DECKEL MAHO DMC 635V ini diproduksi pada tahun 2007. Mesin ini dilengkapi dengan probe pengukur dan probe 3D, sangat ideal untuk tugas pemesinan presisi. Jika Anda mencari mesin frais berkualitas tinggi, pertimbangkan DMG DECKEL MAHO DMC 635V yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Hodpfxjx D Epco Aa Neng • Majalah alat: 20 stasiun • Ukuran meja: sekitar 790 × 560 mm Perlengkapan tambahan • Probe 3D • Pendingin: hanya suplai pendingin eksternal (tanpa pendingin internal/spindle berpendingin) • Konveyor serbuk: tidak termasuk Dimensi Kedalaman mesin: 2050 mm

Kondisi: bekas, jarak tempuh: 128.000 km, daya: 107 kW (145,48 hp), pendaftaran pertama: 11/2008, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: biru, tipe perpindahan gigi: mekanis, kelas emisi: Euro 4, jumlah tempat duduk: 7, panjang total: 6.618 mm, lebar total: 2.130 mm, tinggi total: 2.280 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pemanas parkir,

Kondisi: bekas, Tahun pembuatan: 2008, de-hu-001 Hnodpfx Aaoxbtqij Nsg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 406 mm, jarak gerak sumbu Z: 406 mm, berat benda kerja (maks.): 200 kg, lebar meja: 500 mm, kecepatan spindel (min.): 10.000 rpm, Perlengkapan: konveyor serpihan, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Brand new machine. Only one test workpiece manufactured. The unit has not been used and has been in storage for 2 years. Main Technical Specifications Travels: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Diameter: 500 mm Maximum workpiece weight: 200 kg 5-axis rotary/tilting table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper Through-spindle coolant: 300 psi (21 bar) Tool Changer: 30 tool positions Side-mount, high speed Accuracy and Compensation: Thermal compensation DWO/TCPC – Dynamic Work Offsets / Tool Center Point Control Hnedpjxg Nd Nefx Aa Njg Rigid tapping Configuration and Equipment: Haas NGC CNC control (compatible with FANUC) 1 GB memory Ethernet port, WiFi connectivity USB port, 15” color LCD display Early power-failure detection module Memory lock (keyswitch) Spindle cooling system Protective enclosure with doors Worklight Centralized lubrication system Top cover Measurement and Calibration Equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macro programming, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool Remote jog pendant (RJH) with color display Chip and Coolant Systems: Coolant tank – 95 gallons (360 L) First fill with Blaser coolant emulsion Chip conveyor (belt-type, CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application The Haas UMC-500 is a compact yet powerful universal 5-axis machining center, designed for the production of complex, multi-sided, and free-form surface components. Suitable for both simultaneous 5-axis machining and 3+2 technology, enabling a significant reduction in part setups and ensuring high accuracy. For further questions, please do not hesitate to contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: CV0604, Diameter pipa (maks.): 1.400 mm, Perlengkapan: Penandaan CE, de Hodpfsw Igr Ijx Aa Njng

Kondisi: siap digunakan (bekas), produsen pengendali: Heidenhain TNC 530, berat kosong: 45.000 kg, panjang total: 11.055 mm, lebar total: 6.320 mm, tinggi total: 4.140 mm, ENGLISH TRANSLATION: Hsdpfx Aaoxp Sk Do Nsng Type: DMC-4100LH 2800 mm between columns!! MA-25 2-axis universal milling head – 20 kW – 6000 rpm C-axis range: 0–360° A-axis range: +/- 110° Coolant through spindle 40 bar Total power: 67 kW No foundation required! The Johnford DMC series double column bridge milling machine with moving table is constructed from a one-piece Meehanite cast iron bridge/column structure, reportedly occupying 30 percent less floor space than comparable C-frame vertical machining centers. The bridge mill is available in both moving table and sliding column (fixed table) configurations, ranging from 91 x 91 x 76 cm up to 18 x 6 meters. The bridge milling machines feature a long base with full support of the table over the entire 130 cm Y-axis travel, enabling machining of heavy workpieces. On the Y and Z axes, a constant weight is supported at all times, while only the X-axis carries dynamic loads. This results in precise machining with tight tolerances during high-speed operations. As there is no table overhang, the inclination and yaw angle of the X-axis are eliminated. The distance between the spindle center line and the column is minimized, providing extra rigidity. The machine’s heavily ribbed cast iron construction ensures longevity and optimum surface finish. The combination of dual chip augers and a conveyor belt ensures complete chip removal with minimal manual cleaning. Moreover, finite element analysis (FEA) is used in the design of each bridge mill, simulating the effects of realistic conditions such as vibration, heat, fluid flow, and other physical influences. Longitudinal travel X-axis: 4100 mm Transversal travel Y-axis: 2800 mm Vertical travel Z-axis: 800 mm Table clamping dimensions: 4200 x 2400 mm Spindle power: 30 kW Spindle taper: BT 50 Maximum speed: 6000 rpm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 17.050 h, jarak pergerakan sumbu X: 670 mm, jarak lintasan sumbu Y: 830 mm, jarak gerak sumbu Z: 600 mm, berat keseluruhan: 20.000 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle installed in 2021 with only 5,700 operating hours, and a robust spindle speed of 18,000 rpm. The machine offers a large travel range with dimensions of 670/830/600 mm and accommodates 96 tool stations. Additional features include through-spindle coolant supply with 60 bar, a comprehensive coolant system, and a chip conveyor. Take advantage of this opportunity to purchase a POSmill H 800 U universal machining center. Contact us for further information. Additional equipment: • New spindle since 2021: only 5,700 spindle hours (spindle replaced due to wear) • Inspection under power possible Advantages of the machine Technical features: • Air supply through the spindle • Internal coolant supply: 60 bar • Coolant system with 1,000 l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage detection/measurement • Heidenhain 3D touch probe • Mobile electronic handwheel • Kinematic package Hodsx D Dx Ajpfx Aa Nsng Additional information: Spindle replaced due to wear (new spindle: 5,600 hours since 2021) Production hours: control on: approx. 33,300 hours, spindle on: 17,050 hours (new spindle 5,600 hours, replaced in 2021 due to wear) Tool stations: 96 Including tool holders (shrink chucks, collets, etc.)

Kondisi: bekas, nomor mesin/kendaraan: Y29SHSLW89701xxxx, Tahun pembuatan: 2009, de-20390 Hnodjwi Rm Topfx Aa Nsg

Kondisi: baru, berat kosong: 3.600 kg, berat muatan maksimum: 8.300 kg, berat keseluruhan: 11.900 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.200 mm, lebar ruang muat: 2.480 mm, suspensi: udara, ukuran ban: 205/65 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 205/65 R 17,5, ukuran ban belakang: 205/65 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), jumlah sumbu: 4, This 4-axis KELLENBERGER Kel-Varia UR 175/1000 was manufactured in 1997. It features an internal grinding unit with a swiveling B-axis and a C-axis for non-circular grinding, complemented by a belt filtration system. Consider the opportunity to purchase this KELLENBERGER Kel-Varia UR 175/1000 cylindrical grinding machine. Contact us for further information. Additional Equipment • Belt filter system Machine Advantages Technical Machine Advantages • Internal grinding unit with B-axis for swiveling grinding head and C-axis for non-circular grinding Additional Information Hedpfxsx T Dg Ie Aa Neng Center height x Distance between centers: 175 x 1,000 mm Supplied complete with standard accessories, electrical equipment For three-phase current 3 x 400 Volt, 50 Hz. Machine color: DARK GREY NCS 7502B combined with BLUE NCS KEL-ASSIST 90 PLUS software package Internal grinding unit with 80 mm diameter collet chuck Right-hand side grinding wheel adaptor, 400 x 50 mm diameter Oil mist lubrication system for HJN spindles Micrometric adjustment of the tailstock Three-jaw chuck with face spiral, 160 mm diameter Dressing device on the top table Swiveling diamond holder 9.5 mm MOVOMATIC infeed sensor Set of vibration-damping pads Initial fill set of lubricants CNC-controlled C-axis

Kondisi: bekas, nomor mesin/kendaraan: YF2T32SBGCKN3xxxx, Tahun pembuatan: 2013, de-21898 Hnedpjxznqksfx Aa Nsg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 93.500 h, jarak pergerakan sumbu X: 1.180 mm, jarak lintasan sumbu Y: 710 mm, jarak gerak sumbu Z: 710 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 430, jumlah sumbu: 5, DECKEL MAHO DMC 100 T 5-sumbu ini diproduksi pada tahun 2003. Mesin ini memiliki lintasan sumbu X, Y, dan Z masing-masing 1.180 mm, 710 mm, dan 710 mm, majalah alat SK40 dengan 32 posisi, sistem pendingin internal, dan konveyor serbuk. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal DECKEL MAHO DMC 100 T ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Keunggulan Mesin Keunggulan Teknis Mesin Hnsdpsx T Dgnefx Aa Nog • Pendingin internal • Konveyor serbuk Informasi Tambahan Mesin masih terhubung dengan listrik Spesifikasi Teknis Pendingin melalui spindle: Ya

Kondisi: bekas, nomor mesin/kendaraan: YS2P4X2000200xxxx, jarak tempuh: 410.000 km, Tahun pembuatan: 2005, scania-p310-2005 Hsdpex Hdhxjfx Aa Neng

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 7.647 h, jarak pergerakan sumbu X: 2.300 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, berat keseluruhan: 18.500 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 26.500 W, berat alat: 10.000 g, jumlah sumbu: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006 and is recognized as a robust vertical machining center. It features a large travel range of 2300/800/850 mm and a high spindle speed of up to 12,000 rpm. The machine is equipped with an NC swivel head for the B-axis, a tool magazine with 40 slots, and supports a maximum workpiece weight of 2,500 kg. Consider acquiring this HEDELIUS T8 - 2300 vertical machining center. Please contact us for further details. • NC Swivel Head B-Axis: +92° / -92° • Maximum pendulum travel: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5,000 N, Z 9,000 N • Spindle: • Maximum torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping force (pull-in force): 12 kN • Tool magazine / changer: • Tool positions (standard): 40 • Tool positions (Magnum): 80 • Max. tool diameter: 125 mm (180 mm with adjacent slots empty) • Max. tool length: 330 mm • Tool change time (approx.): 3.5 s • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table / Capacity: Hnedpfx Aaex E Ebws Nsg • Fixed table (L×W): 2000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2,500 kg • Machining capacity: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Dimensions (reference): • Z travel vertical (L2): 850 mm • Spindle nose to swivel axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z travel horizontal (L5): 1,000 mm • Spindle axis to table surface (L6): 210 mm • Y travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power / Weight: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000-17,500 kg • Operating hours: • Total operating hours: 21,100 h • Spindle hours: 7,647 h Additional equipment • Chip conveyor • Through-spindle coolant supply, 40 bar • Paper band filter • Oil and emulsion mist separator • Rotatable viewing windows (2) • Cleaning pistols (2) • Renishaw touch probe Technical specification Taper size SK 40

Tahun pembuatan: 2016, Kondisi: bekas, Mileage: 110,000 km Application: Goods transport Serial number: WMAN18ZZ6GY33xxxx Please contact ATS Norway for further information. Please quote reference number upon request: 22113 Specifications: EU approval valid until 24.01.2026 Mileage: 110,000 km Transmission: Automatic Suspension: Steel front, air rear Engine brake Euro 6 – 250 HP Good tires Side opening (half side) Split box body Approx. 150 meters hose Hammelmann high-pressure pump Internal height: 2.065 m Volvo TD70 marine engine installed in the box 2 m³ water tank All equipment in the vehicle dates from 1986 Radio/CD Climate control / air conditioning Full MAN service history Immediately available Description: MAN TGM box/jetting vehicle from 2016. All equipment in the vehicle dates back to 1986. Only 110,000 km mileage. All maintenance carried out by MAN. Immediately available. Km: 110000 HP: 250 MOT: Yes EU approved until: 24.01.2026 Own weight: 11,870 kg Total weight: 18,000 kg Payload: 6,055 kg Hedsx Sci Sjpfx Aa Nsng Width: 255 cm Length: 751 cm Euro: 6 Model: TGM 18.250 box truck, 110,000 km! Transmission: Automatic

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 14.063 h, kecepatan spindel (maks.): 7.000 rpm, daya motor spindle: 11.000 W, jumlah sumbu: 6, en-GB Hodpex D Ep Njfx Aa Njng

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 5.800 h, beban meja: 7.500 kg, This VOORTMAN V320 was manufactured in 2019. It is equipped with a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. The machine can process structural steel with plate lengths from 850 to 6,100 mm and thicknesses from 6 to 75 mm. It features options for punch marking and countersinking, increasing its versatility. Take advantage of the opportunity to purchase this VOORTMAN V320 plasma cutting machine. Contact us for further information on this machine. • Workpiece size Hnjdpfx Aaox D N Aao Nsg • Min./max. plate length: 850 - 6,100 mm • Min./max. plate width: 200 - 2,050 mm • Min./max. plate thickness: 6 - 75 mm • Max. load capacity: 7,500 kg • Drilling unit: VD40 • Tool mounting: SK 40 • Spindle speed: 0 - 2,500 rpm (stepless, servo motor) • Drill diameter: 5 - 40 mm • Thread cutting: M6 - M30 • Countersinking: Yes • Punch marking option: Yes • Layout marking option (optional): Yes • Automatic tool changer: 2 x VTC 5/40 (2 x 5 positions) • Lubrication/cooling: Internal cooling, air/oil • Hydraulic clamping: Yes • Rated power: 30 kW • Feed and positioning: Synchronously driven servo motors, servo drives • Cutting - Plasma (Smart Focus 300) • Min./max. thickness: 3 - 80 mm • Max. piercing capacity: 40 mm • Virtually slag-free cutting: up to 35 mm • Marking: Yes, with the same consumables • Gases: • Plasma gas for cutting steel: O2 (99.9% pure, clean, dry, oil-free) • Shielding gas for steel: O2 / Air (99.9% pure, clean, dry, oil-free) • Marking gas: Argon; for >200 A, nitrogen • Automatic gas console: Yes • Automatic height adjustment: Yes • Ignition: Automatic • Cutting speed (structural steel): • 6 mm: approx. 3,700 mm/min @ 90 A • 12 mm: approx. 3,600 mm/min @ 200 A • 25 mm: approx. 1,600 mm/min @ 300 A • 40 mm: approx. 720 mm/min @ 300 A • 50 mm: approx. 400 mm/min @ 300 A • 80 mm: approx. 100 mm/min @ 300 A • Cutting - Oxy-fuel (torch cutting unit) • Nozzle type: nozzle mixing • Automatic height adjustment: Yes • Gas supply: Magnetic valve with backflow preventer • Fuel gas: Propane (optional: acetylene) • Cutting gas: O2 • Max. thickness: 75 mm • General/Installation • Working direction: Left to right • Working height: 760 mm (+/- 25 mm) • Ambient temperature: -10°C to +35°C, max. 95% relative humidity • Voltage regulator: Not included • Power transformer: Not included Additional equipment • Kjellberg Smart Focus 300 plasma source (included) • Donaldson DFPR06 extraction unit (included; last filter change January 2025)