Beli International Paystar 5000 bekas (11.895)

Kondisi: baru, Tahun pembuatan: 2026, MIXER Mod. MV2 • Steel construction, exterior surfaces painted (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from floor to loading point) • Programmable control unit with emergency stop button (The customer can choose between manual mode – continuous operation – and automatic mode – with adjustable cycle and pause times) • Gearmotor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Top lifting door with hinges for material loading, equipped with safety micro-switch • Bottom lifting door for material discharge, equipped with safety micro-switch • Side openings for connecting a suction hose Dcedswktm Ejpfx Anzol • Mixer frame on adjustable telescopic legs, with swivel castors and brakes

Kondisi: baru, Tahun pembuatan: 2026, NDS 2 • Construction made of aluminium profiles • Adjustable angle/incline • Sloped section length: 1300 mm • Usable width: 350 mm • Loading length: 600 mm Dcsdewktn Ajpfx Anzsl • Separation length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Kondisi: baik (bekas), Tahun pembuatan: 2005, Text "Durchstoßofenanlage-Pusher (PUS1), Fabr. Ipsen International GmbH..." translated professionally into English: Push-type Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA consisting of: Two-chamber Pre-washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60–80 °C Push-type Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas-fired, 80–100 mbar, 350–500 °C Push-type Gas Carburizing Furnace (Double Lane) Type: PP-2 65x65x65-18-G, natural gas-fired, 86 A, 29.6 kVA, 10 kWh/m³, 80–100 mbar, 860–950 °C, 140 pieces per batch, 695 kg/h Oil Quench Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, Air cooling, 6 m³ bath volume, max. 120 °C, working temperature 60–80 °C Two-chamber Post-washing Machine, Dcsdpfoyabxysx Anzel Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60–80 °C Push-type Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, Max. furnace temperature 300 °C, working temperature 150–240 °C Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch data: Case hardening for gear parts 650 mm x 650 mm x 650 mm, max. 280 kg, Batch transport height 800 / 2,200 mm

Kondisi: baru, Perangkat baru MASS International Konveyor penampung NPS Konveyor / Sabuk penampung Pengiriman cepat tersedia Area penampung tanpa dinding samping dapat disesuaikan tinggi, dapat dipindahkan dengan roda pengunci yang dapat diputar Contoh: NPS 1 Panjang 1500 mm Lebar efektif 250 mm Lebar luar 250 mm (tanpa motor) Area penampung tanpa dinding samping, sehingga lebar efektif penuh tinggi pengeluaran dapat diatur antara 200–400 mm Sabuk PU halus, hitam Kecepatan sabuk 3 m/menit Konveyor dapat dipindahkan pada roda pengunci yang dapat diputar Harga yang disebutkan berlaku untuk NPS1. Opsional: Dimensi sesuai permintaan pelanggan Sabuk food grade (sesuai FDA) Kecepatan sabuk yang diubah Inverter frekuensi untuk pengaturan kecepatan sabuk tanpa tingkat Dsdpfx Aeizi S Denzecl dll.

Kondisi: baru, Tahun pembuatan: 2022, For sale is a CTM CT 200 container from MASS. This model is available in various sizes (see images). Dcjdpfx Ajip Ucnjnzel

Kondisi: baru, Tahun pembuatan: 2022, *CLEARANCE SALE * DISCOUNT PROMOTION* The conveyor belt is from 2022, brand new and unused. We offer a 1-year warranty. New price starting from model year 2023: €1,870 Length: 2000 mm Width: 150 mm Mobile Belt speed: 3 m/min, can be adjusted Height adjustable: 840 mm – 1240 mm Dedpjhy Edvefx Anzjcl Additional information: Available with or without guide plates/side walls (height: 60 mm)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We are offering a highly productive 3D printer for industrial series production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling protocols and functional reports are available, confirming that the machine was operational before disassembly. All axes have been properly secured by professionals. The machine can be transported on a standard truck. Djdpfx Ajvu Syyjnzecl TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser operating hours: Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring options included Filter unit Accessories: 2 build cylinders 3 dosing cylinders 1 used overflow container 1 new overflow container Manuals 4 new heat exchangers 2 new Easy Filters 3 NTRON SIL02 oxygen analyzers with new sensors 1 new oxygen sensor And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the containers is also in stock and can be offered as an option. Faster to premium 3D components The highly productive, semi-automated TruPrint 5000 3D printing system is your entry into industrial series production. With features such as optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are fully equipped for demanding, industrial applications. The machine quickly and reliably produces high-quality parts from various metallic materials—meeting rigorous quality standards in tool and mold making, for 3D printing on preform blanks, as well as in aerospace and medical technology. Optionally, the entire process chain can run under a protective gas atmosphere: sieving, printing, cooling, de-powdering. Combined with external component and powder management and TRUMPF monitoring solutions, it's ideal for industrial series additive manufacturing. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. Additively manufactured structures are applied to a preform blank. This innovative option is especially suitable for simple handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm: Ø 300 x H 400, Ø 290 x H 390 (reduced with preheating >200°C) Processable materials: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate [2] cm³/h: 5 - 180 Layer thickness [3] μm: 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W: 3 x 500 Laser spot diameter [3] μm: 100 - 500 Min. detectable oxygen content ppm: Up to

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2015, Fungsionalitas: tidak berfungsi, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Penawaran mengikat untuk pengambilan tepat waktu hingga 18 September 2026! Sebuah forklift akan disediakan di lokasi untuk membantu pemuatan. Mesin ini rusak dan berfungsi sebagai sumber suku cadang. RINCIAN TEKNIS Teknologi pencetakan: Inkjet Sistem warna: 7 warna RINCIAN MESIN Data koneksi listrik Koneksi tiga fase 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR Koneksi tiga fase 1: 1,5 kA Koneksi tiga fase 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR Koneksi tiga fase 2: 1,5 kA Koneksi satu fase: 220–240 V, 50/60 Hz, 16 A SCCR Koneksi satu fase: 35 kA PERALATAN Kesesuaian: CE, KCC Persetujuan keselamatan: TÜV Rheinland – Disetujui sebagai Tipe yang Aman Dcsdpfx Anezx E N Sjzol

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2015, Fungsionalitas: tidak berfungsi, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Penawaran mengikat untuk pengambilan tepat waktu hingga 18 September 2026! Sebuah forklift akan disediakan di lokasi untuk membantu pemuatan. Mesin ini rusak dan berfungsi sebagai sumber suku cadang. RINCIAN TEKNIS Teknologi pencetakan: Inkjet Sistem warna: 7 warna Dcjdpfx Aozx E Axenzsl RINCIAN MESIN Data koneksi listrik Koneksi tiga fase 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR Koneksi tiga fase 1: 1,5 kA Koneksi tiga fase 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR Koneksi tiga fase 2: 1,5 kA Koneksi satu fase: 220–240 V, 50/60 Hz, 16 A SCCR Koneksi satu fase: 35 kA PERALATAN Kesesuaian: CE, KCC Persetujuan keselamatan: TÜV Rheinland – Disetujui sebagai Tipe yang Aman

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Laser welding robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of manufacture: Calendar Week 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as-new, used EXTENDED EQUIPMENT: 30 m fiber optic cable (LLK) TruDisk 4001 (solid-state, fiber) incl. 1 fiber connection A 1 PCS, cooling unit included, laser welding safety package included Workpiece handling: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Endless rotary-tilt positioner Zero-point clamping system for rotary-tilt positioner Enlarged safety enclosure: 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Djdpfx Anow U Ezzozscl Machine: Collision protection KUKA robot KR 70 Machine status indicator Compressed air and shielding gas supply Machine capable of operation up to 45 °C ambient temperature Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualization Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color screen Touchpoint user interface Data transmission: USB interface RJ-45 network interface Central Link Remote support interface Online Update Manager Safety: Work area monitoring Workpiece handling: Forming gas ADDITIONAL OPTIONAL BASIC EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Swivel arm for control panel Axis adjustment kit Robot elevation (extended standard) Agreement on data usage TECHNICAL DATA: Type: High-accuracy robot Number of axes: 6 Nominal payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turning axis Max. working area (diameter turning drum): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turning positioner Max. working area (diameter turning drum): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. mass moment of inertia: 600 kg·m2 Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Loading height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. mass moment of inertia (ring rotary indexing table): 600 kg·m2 Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axes rotation range: +/- 190° Max. mass moment of inertia, vertical rotary axes: 359 kg·m2 Loading height: 885 mm CE and EU Machinery Directive compliance must be checked by buyer if reassembled. New price: over 580,000 EUR This used machine can be inspected under production conditions. All information is provided without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 13.100 h, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain, model controller: TNC 620, berat keseluruhan: 3.500 kg, kecepatan spindel (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah spindel: 1, Perlengkapan: dokumentasi / manual, konveyor serpihan, Pusat Pemesinan 3 Sumbu Produsen: Spinner Tipe: VC-450 Tahun Pembuatan: 2016 Pengendali: Heidenhain TNC-620 Jam Operasi: sekitar 13.100 jam Nomor Seri: BV XXXX Parameter Teknis: ----- • Rentang Pergerakan Sumbu X-Y-Z: 450 x 400 x 400 mm • Meja Kerja: 770 x 410 mm • Berat Maksimum Benda Kerja: 200 Kg • Spindel: 15.000 RPM • Majalah: 24 x HSK-A63 • Sistem Pendingin: 20 Bar termasuk IKZ, penyemprotan alas, ..Filter kertas dengan tangki tambahan berkapasitas 300L • Pencahayaan Area Kerja LED • Sistem Penyedot Kabut Oli • Probe Fungsional 3D • Konveyor Serpihan • Berat Mesin: sekitar 3,5 ton Dcjdpfx Ajzytzfsnzsl • Dimensi: 2.400 x 1.700 x 2.500 mm Aksesori: ----- • Dokumentasi

Kondisi: bekas, Tahun pembuatan: 1999, nomor mesin/kendaraan: IntNr231509, A vendre : tour CNC Miyano BNE-51S avec magasin automatique IEMCA BOSS 552-HD. Année de fabrication : 1999 Commande : FANUC Série 18-T (commande double canal) Caractéristiques techniques Diamètre maximal des barres : 51 mm Longueur de tournage maximale : env. 125 mm Déplacements : * X1 / X2 : 150 mm / 115 mm Z1 / Z2 : 380 mm / 125 mm Axe Y : +/- 40 mm (tourelle supérieure) Broches (broche principale & contre-broche) Plage de vitesses : 135 – 5.000 tr/min (deux broches) Puissance motrice : 11 kW / 15 kW (broche principale) Axe C : 0,001° sur les deux broches pour usinage de contour intégral Dcjdpjzx Scfefx Anzol Système d’outillage (2 x tourelles) Tourelle 1 (haut) : 12 postes (tous entraînés, incl. axe Y) Tourelle 2 (bas) : 12 postes (tous entraînés) Vitesse outils motorisés : max. 3.200 tr/min Magasin d’alimentation : IEMCA BOSS 552-HD Plage diamètres : 5 mm à 51 mm Longueur barre : jusqu’à 3.200 mm Convoyeur à copeaux Système d’extinction incendie Batec La machine peut être vue sous tension sur rendez-vous. Sous réserve de modifications, erreurs sur les données techniques et entre-temps de vente préalable !

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 20.000 h, nomor mesin/kendaraan: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes, and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Max. turning diameter: approx. 390 mm Max. turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12 stations (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor Dcsdpfezx Rwzox Anzol 20 bar high-pressure coolant system with paper belt filter Subject to prior sale and technical modifications or errors!

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: IntNr231647, CNC loading magazine LNS Express 220 Year of manufacture: 2007 Type: Bar loading magazine Quick conversion of the guide channel in less than approx. 2 minutes. Complete changeover of the guide elements possible in under approx. 8 minutes. Technical details: Diameter range: 2 mm to 20 mm Channel diameter: 22 mm Maximum bar length: 3,000 mm Installation dimensions (L x W x H): 3,970 x 480 x 1,250 mm Weight: approx. 850 kg Condition: Fully functional The machine can be inspected under power by appointment. Subject to prior sale and changes/errors in technical details and information. Dsdpfxjzx Rwho Anzscl

Kondisi: bekas, Tahun pembuatan: 2011, nomor mesin/kendaraan: IntNr231315, Technische Daten – gebr. LNS FOX IFS WS 500 Merkmal Spezifikation Modell FOX IFS WS 500 Baujahr 2011 Förderleistung ca. 500 m³/h Motorleistung ca. 0,37 kW Spannung 400 V / 50 Hz (typisch) Gewicht ca. 35 kg Abmessungen ca. 465 × 500 × 1 145 mm (BxTxH) Filterstufen 1. Vorfilter F5 2. Zentrifugalabscheider 3. Nachfilter F5 (optional HEPA H13) Filtrationseffizienz 99 % bei ≥ 1–2 µm (F9), optional HEPA 99,95 % bei ≥ 0,1 µm Geräuschpegel ca. 65 dB (WS2 mod. ähnlich) Zubehör & Merkmale • Kompaktes Design zur Montage direkt an oder neben CNC-Maschinen • Stativ für Absaugung • Drei Reinigungsstufen für effektive Öl- und Emulsionsnebelabscheidung • Kartuschenfilter wahlweise mit HEPA-Kit nachrüstbar • Leichte Wartung, geräuscharmer Betrieb und langlebige Filterelemente Änderungen und Irrtümer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten! English Translation: Dcodpfxozx Rv Dj Anzol Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (similar to WS2 model) Accessories & Features • Compact design for direct installation on or beside CNC machines • Extraction stand • Three-stage cleaning for efficient oil and emulsion mist separation • Cartridge filter optionally upgradeable with HEPA kit • Easy maintenance, low-noise operation and long-life filter elements Specifications and details subject to change, errors excepted, and prior sale reserved!

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: IntNr231232, Hermle C600 U Tahun pembuatan 2004 Spindel baru, lengkap dengan protokol pengoperasian Sistem Kendali: - Heidenhain iTNC 530 - Jam ON Control: 68.026 - Jam ON Mesin: 81.237 - Jam ON Spindel: 12.429 Spindel: - Kecepatan: 16.000 rpm - Holder alat: SK-40 - 30 posisi majalah alat Perlengkapan: - Meja penjepit kaku - NC clamping sumbu ke-4 iTNC - Sistem pendingin AKZ - Tanpa konveyor serbuk - Modul manual elektronik (iTNC) - Pemantauan patah alat - Pistol semprot serbuk - Sakelar kaki untuk penguncian/pembebasan - Unit hidrolik untuk penguncian/pembebasan Langkah kerja: - Sumbu X (memanjang): 600 mm - Sumbu Y (melintang): 450 mm - Sumbu Z (vertikal): 450 mm Meja: Dcodpfxszx Rvks Anzjl - Permukaan penjepitan: 800 mm x 465 mm - Beban maksimum meja: 250 kg Sumbu: - Kecepatan pergerakan: 35 m/menit - Akselerasi: 5 m/s² - Sistem pengukuran X/Y/Z: 0,1 µm Dimensi & Berat: - Berat mesin: sekitar 6,8 ton - Dimensi mesin (P x L x T): 2,5 m x 2,4 m x 2,43 m Mesin dapat diperiksa dalam kondisi terhubung listrik sesuai janji. Perubahan dan kesalahan data teknis serta kemungkinan penjualan sementara dapat terjadi!

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 21.398 h, nomor mesin/kendaraan: IntNr231185, EMAG WEISS W11 CNC SL650 – Mesin Gerinda Silinder Universal – Tahun Pembuatan: 2020 Mesin EMAG WEISS W11 CNC SL650 bekas tersedia untuk dijual – mesin gerinda silinder universal bertenaga tinggi dengan kontrol CNC. Mesin ini ideal untuk tugas penggerindaan yang menuntut pada komponen individual, prototipe, serta produksi kecil dan menengah. Spesifikasi Mesin Produsen: EMAG WEISS Tipe: W11-CNC SL650 Tahun Pembuatan: 2020 Jam Operasi: sekitar 8.850 jam spindel / sekitar 22.000 jam operasi Kondisi: Bekas, terawat dengan baik, siap digunakan Data Teknis Kontrol: Dikontrol CNC (misalnya Heidenhain / Siemens / Fanuc – tergantung pada model) Panjang gerinda maks.: 650 mm (antara senter) Tinggi senter: sekitar 200 mm Diameter gerinda luar: hingga sekitar 390 mm Berat benda kerja maks. (tergantung): sekitar 100 kg (MK4) Berat benda kerja maks. antara senter: sekitar 250 kg Umpan sumbu X: sekitar 380 mm Umpan sumbu Z: sekitar 1.150 mm Diameter roda gerinda: 400 – 500 mm tergantung pada perlengkapannya Daya terukur: 9 – 11 kW (sekitar 12 – 15 hp) Kecepatan periferal: 20 – 50 m/s Fitur dan karakteristik kinerja Dcodpfx Anszx Rvdezol Operasi layar sentuh CNC berbasis Windows – pemrograman yang mudah melalui dialog atau DIN/ISO (opsional) Konsep dua-dalam-satu: mesin dapat dioperasikan secara konvensional dan dikontrol CNC Panduan linear dan sekrup bola presisi tinggi untuk akurasi tinggi Sistem pengukuran langsung (skala kaca) (opsional pada banyak mesin) Penyesuaian otomatis roda gerinda dengan kompensasi Kontrol benturan & pemantauan GAP untuk keamanan mesin dan proses Sistem pendingin, pemisah emulsi, dan konveyor serpihan tersedia (tergantung pada perlengkapannya) Persiapan untuk otomasi / antarmuka robot dimungkinkan Mesin dapat diperiksa setelah perjanjian dibuat. Perubahan dan kesalahan pada data dan spesifikasi teknis serta penjualan antara waktu dapat terjadi!

Kondisi: bekas, Tahun pembuatan: 2004, jam operasional: 145.113 h, nomor mesin/kendaraan: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Dsdpfxozx Ru He Anzocl Technical Data MAIN SPINDLE - Maximum bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Maximum bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven Tools: Tool drive power: 1.1 kW Maximum speed: 6,000 rpm Tools: Number of tools: up to 20 (including several driven tools) Driven tools: 4–6, for milling, drilling, and threading operations Tool holding: ER collets or similar systems Rear machining: 4 stations on the rear side Bar feeder IEMCA Smart 316 / 32L Year: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system/Object extinguishing system Kraft and Bauer Operating manual Parts separator Chip flushing system The machine can be inspected under power by prior arrangement. Subject to technical changes, errors, and prior sale.

Kondisi: bekas, Tahun pembuatan: 1999, nomor mesin/kendaraan: IntNr231636, Mesin bubut CNC kepala geser bekas, Citizen L520, tahun pembuatan 1999. Sistem kontrol, Cincom Mitsubishi Meldas. 7 sumbu (X1/Z1/Y1/C1/X2/Z2/C2). Diameter batang maksimum 20 mm. Panjang bubut maksimum 205 mm. Spindel utama, kecepatan maksimum 10.000 RPM, sumbu C 0,001 derajat. Spindel tandingan, kecepatan maksimum 10.000 RPM, sumbu C 0,001 derajat. Penyangga perkakas untuk total 18 perkakas (penyangga perkakas linier, alat bantu depan, pemesinan sisi belakang). Sabuk konveyor suku cadang. Magasin pemuatan FMB Turbo 3-26. Dimensi mesin (P x L x T): 2540x1450x1850 [mm]. Berat mesin: 1750 [kg]. Dcodpfxezx Rumo Anzsl Dimensi magasin pemuatan (P x L x T): 3900x900x1450 [mm]. Berat mesin: 850 [kg]. Mesin dapat diperiksa setelah perjanjian dibuat. Perubahan dan kesalahan dalam data dan informasi teknis serta kemungkinan penjualan terlebih dahulu dapat terjadi!

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: IntNr230440, control system: CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), max. bar diameter: 16 mm, max. turning length: 200 mm, Main spindle: max. speed 10,000 rpm, C-axis: 0.001° Dodpfszx Rugsx Anzjcl Counter spindle: max. diameter 16 mm, max. speed 10,000 rpm, including spindle indexing Tool holder for a total of 17 tools (linear tool holder, front tool post, backworking unit) Parts conveyor belt Chip conveyor Fire extinguishing system Loading magazine: IEMCA Genius 118/3200, year of manufacture 2005 The machine can be inspected by prior appointment. Technical specifications and details are subject to change and errors; prior sale reserved!

Kondisi: bekas, Tahun pembuatan: 2019, nomor mesin/kendaraan: IntNr231598, en Dcedpfx Ajzx Rtvsnzsl

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 38.709 h, nomor mesin/kendaraan: IntNr231545, Dijual sebuah pusat bubut/milling CNC HWACHEON berkinerja tinggi dan serbaguna, model Hi-TECH 230BL YSMC, buatan Januari 2020. SPESIFIKASI TEKNIS Pengendali CNC: FANUC 0i-TF Manual Guide i Diameter putaran maksimum di atas alas: sekitar Ø 750 mm Diameter putaran maksimum di atas kepala geser: sekitar Ø 540 mm Diameter bubut maks.: sekitar Ø 400 mm Diameter bubut standar: sekitar Ø 277 mm Panjang bubut maks.: sekitar 560 mm Jangkauan sumbu Y: 120 mm / ±60 mm Spindel utama Sumbu C Ukuran chuck: 10" Jenis hidung spindel: ASA A2-8 Kecepatan spindel maks.: 3.500 RPM Lubang spindel: Ø 91 mm Kapasitas batang maks.: Ø 81 mm Motor spindel: 18,5 / 15 kW Spindel penyeimbang Sumbu C Ukuran chuck: 6" Jenis hidung spindel: ASA A2-5 Kecepatan maks.: 5.000 RPM Lubang spindel: Ø 62 mm Kapasitas batang maks.: Ø 51 mm Daya penggerak: 7,5 / 5,5 kW Revolver perkakas Revolver: BMT65 Dsdpfszx Rtcex Anzscl Stasiun perkakas: 12 Posisi yang dapat diindeks: 24 Daya penggerak: 5,5 / 3,7 kW Kecepatan maks.: 5.000 RPM Diameter pengeboran maks.: Ø 20 mm Ukuran ulir maks.: M16 Sistem penyedot debu AR Filtratione Paket pemegang perkakas Konveyor serpihan Aksesori Buku manual Robot dengan sistem pemuatan dan pembongkaran Majalah pemuatan FMB SL 80S / 1200, tahun pembuatan 2012 Mesin dapat dilihat dengan perjanjian sebelumnya. Kami berhak untuk melakukan perubahan dan koreksi pada data dan spesifikasi teknis, serta menjual barang tersebut dalam jangka waktu tersebut!

Tahun pembuatan: 1977, Kondisi: bekas, nomor mesin/kendaraan: IntNr231519, A used Jung HF 40 surface grinder, manufactured in 1977, is available for sale. This is a solid, heavy-duty version. Technical data: • Design: hydraulic • Table size: 400 x 150 mm • Maximum grinding length: 400 mm • Maximum grinding width: 150 mm • Grinding wheel diameter: 200 mm • Grinding wheel width: 16 mm • Spindle speed: approx. 2,800 rpm • Table speed: infinitely variable, 2–20 m/min • Automatic vertical feed: 0.002–0.013 mm Dcjdjzx Rrxepfx Anzjl • Machine weight: approx. 900 kg • Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by prior appointment. Subject to technical modifications, errors, and prior sale!

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: IntNr231316, en Dcjdpfxjzx Rrre Anzsl

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 48.000 h, nomor mesin/kendaraan: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine operating hours: 56,000 hrs Machine automatic cycle hours: 48,000 hrs Djdpfxszx Rrfe Anzscl CNC control: FANUC 31i – Model A, 7 axes Technical Data: - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE: - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret): - Max. bar diameter: 42/(60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. turret speed: 6,000 rpm Rear-end machining: - 4 fixed tool stations - Up to 14-tool capacity possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 - Bar diameter: 5–55 mm - Bar length: 3,200 mm - Chip conveyor The machine can be inspected under power by appointment. All technical specifications are subject to change and error. Sale subject to prior availability.