Beli Inti Bor bekas (4.019)

Kondisi: bekas, lebar total: 800 mm, panjang total: 1.250 mm, tinggi total: 1.600 mm, 1 Kodpfx Agewywwyj Rolp

Kondisi: baru, de_en_001 Kljdpsyrht Ijfx Ag Rop

Kondisi: baru, Condition: new Delivery time: approximately 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.4 kW Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Maximum drilling capacity: 12 mm Maximum annular cutter capacity: 36 mm Maximum cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Minimum workpiece thickness: 6 mm This special battery-powered magnetic drill with a permanent magnet base is designed for use in remote areas where no power supply is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that provides green and red signals to indicate the drill's current status and issue safety warnings. The drill can be used on convex (minimum diameter: 80 mm) and concave (minimum diameter: 1,000 mm) materials. Up to 47 holes with a diameter of 20 mm can be drilled in 10 mm steel plates when the PRO-36 PM Battery is equipped with the CAS LiHD 10.0 Ah battery pack. Features and advantages: • LED monitoring system flashes green when insufficient adhesion is detected, e.g., due to a gap or thin workpieces Kedpfx Agjyrhtns Rolp • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor if the machine detaches unexpectedly • Control panel features so-called vandal-proof illuminated start/stop switches for the motor Standard delivery package: • Cordless magnetic drill with cooling system • Plastic carry case • 4.0 Ah battery • Handle (3 pieces) • Safety belt • 4 mm Allen key with handle • Operating manual OPTIONS (prices on request): Charger Pressure cooling system Vacuum pad Vacuum pump Compressed air ejector

Kondisi: baru, Condition: new Delivery time: approx. 2-4 weeks from order Country of origin: Poland Price: €1,995 Drilling capacity in structural steel: 25 mm Tool holder: 19 mm Weldon Motor power: 1.6 kW Thread cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 505 mm Weight: 18 kg Max. drilling capacity: 25 mm Max. annular cutter capacity: 70 mm Max. cutting depth: 75 mm Stroke: 190 mm Motor speed: 120-190 / 290-450 rpm Min. workpiece thickness: 8 mm The PRO-72T drilling machine is suitable for drilling and thread cutting. The powerful motor with variable speed enables milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to clockwise and counterclockwise rotation, the machine can cut threads up to M20 using Promotech’s new thread cutting system. The two-speed gearbox with stepless speed adjustment allows optimal speed settings based on diameter, steel quality, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display simplifies machine operation and enhances safety at work. Features and advantages: • Powerful motor with robust 2-speed gearbox • Electronic Speed Stabilization System (ESSS) for consistent speed regardless of load fluctuations • Thread cutting in through and blind holes • Milling with carbide or HSS cutters as well as drilling • Electronic clutch • Overload and overheating protection • Robust design for extended tool life • Inclination sensor stops the motor if the machine tilts • 360° visualization displays the current operating status of the drill and provides safety and diagnostic information, e.g., for worn carbon brushes • Innovative, lightweight smart magnet • Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials • Energy Saving Base (ESB) uses only 50% of its power in idle mode • Semi-automatic spline adjustment for easy, fast, precise, and repeatable gib setting without specialist knowledge • Intuitive control panel on top of the drill • Large coolant tank Kledpfx Agjyrhrwj Rop Standard scope of delivery: • Drilling machine • Plastic case • Handles (3 pcs.) • MK3 arbor with 19 mm (3/4") weldon holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 5 mm T-handle allen key • 4 mm allen key • 2.5 mm allen key • 8 mm combination wrench • Operating instructions OPTIONS (PRICES ON REQUEST): Pressure cooling system Pipe mounting

Kondisi: baru, en-001 Kljdpfsyrhqtjx Ag Rsp

Kondisi: baru, en-GB Kedpfxjyrhqms Ag Rjlp

Kondisi: baru, en-GB: Condition: new Delivery time: approx. 2 – 4 weeks from order Country of origin: Poland Price: €995 Drilling capacity in structural steel: 23 mm Arbor: 19 mm Weldon Klsdsyrhp Nepfx Ag Rep Motor power: 1.15 kW Length: 331 mm Width: 254 mm Height: 456 mm Weight: 15.5 kg Max. drilling capacity: 23 mm Max. core drill capacity: 50 mm Max. cutting depth: 50 mm Stroke: 160 mm Motor speed: 240 / 480 rpm Min. workpiece thickness: 6 mm The PRO-50, equipped with a specially developed motor and 2-speed gearbox (240/480 rpm), is optimised to achieve the correct speed for working with HSS cutters up to Ø 45 mm and twist drills up to Ø 23 mm. The rigid construction, optimised using FEA (Finite Element Analysis) software, increases tool life and allows a cutting depth of up to 75 mm. Its compact design and innovative lightweight intelligent magnet make this machine a true lightweight. The PRO-50 delivers maximum holding force on thin materials thanks to magnetic field shape control (MFSC). Both the drill and operator are protected from working on materials that are too thin by the Magnetic Power Adhesion Control (MPAC) module. In addition, the PRO-50 is equipped with an Energy Saving Base (ESB), which uses just 50% of its power consumption when the motor is not running. Features and Benefits: • Compact design with excellent power-to-weight ratio • Specially developed motor • Motor speeds 240 / 480 rpm (under load) • Spindle fitted with MT2 • Innovative lightweight intelligent magnet • Rigid construction extends tool life • Large stroke allows use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) delivers maximum holding force on thin materials • Magnetic Power Adhesion Control (MPAC) monitors the adhesion force of the electromagnetic base and protects both operator and machine from working on materials that are too thin • Energy Saving Base (ESB) uses just 50% power when the motor is not running Standard delivery set: • Drilling machine • Plastic case • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon holder • Safety belt • Cooling system • Protective spring for coolant hose • MT2 drift • 2.5 mm Allen key • 5 mm Allen key • 5 mm Allen key with handle • 8 mm open-ended spanner • Operating manual OPTIONS (PRICES ON REQUEST): Pipe mounting Pressure cooling system Vacuum pad Vacuum pump Pneumatic ejector

Kondisi: baru, en-GB Kljdpfsyrhp Asx Ag Rop

Kondisi: baru, translation-01 Ksdpfxsyrhppo Ag Rjlp

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), de-tos-cnc-tischbohrmaschine-2406 Klsdpfxjvyr I Ij Ag Rjp

Kondisi: bekas, Bor mesin multi-spindle SCM Startech 23 23 spindle, spindle kiri/kanan, Kedpfsyu R S Sjx Ag Relp penjepit cepat, jarak antar spindle 32 mm, pemboran vertikal, horizontal, atau miring, penjepit pneumatik, daya 380V, motor 2,2 KW Berat mesin 500 kg Mesin dalam kondisi baik, siap digunakan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, Mesin bor multi-spindle QUICK CNC KQ-62 Lite ini diproduksi pada tahun 2025. Dapat menangani benda kerja dengan panjang 70 hingga 2400 mm, ketebalan 9 hingga 60 mm, dan lebar 30 hingga 1220 mm. Fitur termasuk sistem kontrol Higerman, dua spindle milling 3,5 kW pada 18.000 rpm, serta unit pengeboran yang lengkap. Pertimbangkan kesempatan untuk membeli mesin bor multi-spindle QUICK CNC KQ-62 Lite ini. Hubungi kami untuk informasi lebih lanjut. Kledpfxex S Size Ag Rsp Jenis Aplikasi Boring & Drilling (Kayu)

Kondisi: bekas, Fungsionalitas: belum diuji, Kedalaman bor 180 mm Kledpfjyviuvex Ag Rjp Penyesuaian tinggi 200 mm Chuck bor 0-20 mm Kecepatan putar 2800 rpm Daya motor 2,2 kW Berat sekitar 240 kg

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), bohrmaschine-65mm Klsdpfx Agjyviyfe Rep

Kondisi: baik (bekas), Tahun pembuatan: 1970, mesin bor tiang besar yang stabil Klodpfeygq S Njx Ag Rep jarak maksimum ke kepala bor sekitar 800 mm jarak maksimum dalam hingga tengah kepala bor sekitar 200 mm

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: pencahayaan, Sangat sedikit jam kerja, 95% digunakan untuk aluminium. Kjdpfx Aoydum Ejg Rolp

Kondisi: bekas, Tahun pembuatan: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping, drilling, and releasing; electric intermittent operation - Automatic retraction of the drilling unit after reaching the set drilling depth - Automatic extension of the drilling hole depth for end-grain drilling saves re-adjustment of the drilling depth when switching from flat-surface to end-grain drilling. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end side 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) including 21 quick-change chucks (System Ganner) for easy drill bit changes - Easy swivel of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamping beam, movable along Y-axis, with 3 pneumatic clamping cylinders for workpiece height up to max. 80 mm - Ideal stop system comprising: Kljdpfeyrqubsx Ag Rep - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for series drilling in System 32 - Side stops and position settings, as well as drilling height setting over support table via mechanical digital counters - Side stops can be easily swung away for the shortest possible changeover between carcass, frame, and line boring - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm - Ideal three-stage... (weight: approx. 400 kg gross, approx. 350 kg net) Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Equipment: - 1 dust extraction funnel, dust-tested, ø 120 mm - 1 set for series drilling in System 32, complete with: - 1 base rail 1050 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 frame dowel device, complete with: - 1 central stop - 1 round stop bar, 850 mm long - 2 stops Location: Nattheim

Kondisi: bekas, Mesin Frais Alat Universal DECKEL Tipe FP 1 No. Mesin 51265 Tahun Pembuatan sekitar 1967 Perjalanan sumbu X: 300 mm Y: 150 mm Z: 340 mm Ukuran meja 600 x 200 mm Taper spindle SK 40 - S20 x 2 Kecepatan spindle 40-2000 rpm, 16 tingkat Daya motor 1,0 dan 1,6 kW, bisa pengalih kutub Koneksi listrik 380 Volt, 50 Hz - Feeding pada sumbu X dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi Kedpfx Aoghtvaog Rolp - Gerakan pinol pada kepala frais vertikal 60 mm - Meja sudut dapat diputar, diputar-putar, dan dimiringkan - Pompa pendingin di kaki mesin - Lemari kontrol terpisah Dimensi ruang yang dibutuhkan P x L x T 1100 x 1100 x 1600 mm Berat 690 kg dalam kondisi baik

Kondisi: bekas, CNC travelling column drilling and milling machine ANAYAK Type HVM-3800-P Bed-type milling machine, design similar to a floor plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 "Refurbished 2025" The machine will be overhauled in 2025 and can then be inspected in stock at 37235 Hessisch Lichtenau. Travel distances: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm Kljdpfx Agexcgtgo Rjp T-slots: 8 slots, 22 mm, spacing 130 mm Table load: max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60–4000 rpm, infinitely variable Feed speed: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal head, fully automatic swiveling in two 45° axes – B+C axis - HEIDENHAIN iTNC 530 control with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting - Free-standing control cabinet - Chip conveyor mounted between the travelling column bed and the machine table - 32,078 operating hours read - Coolant system - Free-standing hydraulic unit - Operating manual with wiring diagrams Footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 075912, 26444 Kljdpfxjyvhune Ag Rsp

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, 1 x mesin pengasah bor Kodpfxeyvhg Rs Ag Relp Darex M 5 dengan 2 x chuck Mesin dapat dilihat dalam keadaan terhubung listrik.

Kondisi: sangat baik (bekas), Nomor katalog 7787 DATA TEKNIS - Diameter alat: 14 mm - Kedalaman lubang maks: 170 mm - Panjang milling maks: 180 mm - Pengaturan kepala bor maju/mundur - Pengaturan meja naik/turun & ke samping - Sudut putar meja +/-20˚ - Dimensi meja kerja: 620x280 mm - Penjepitan material - Daya motor: 1,5 kW - Rem - Dimensi (P/L/T): 1070x660x1250 mm - Berat: 300 kg Kljdsxt It Ajpfx Ag Rjp KEUNGGULAN – Buatan Polandia – Kondisi sangat baik – Bor bekas Harga netto: 5.900 PLN Harga netto: 1.400 EUR Harga netto dihitung dengan kurs 4,2 PLN/EUR (Saat terjadi fluktuasi nilai tukar yang signifikan, harga dapat berubah)

Kondisi: sangat baik (bekas), Nomor katalog 7689 DATA TEKNIS - Diameter alat: 16 mm - Kedalaman lubang maksimum: 160 mm - Panjang frais maksimum: 160 mm - Penyesuaian unit bor: depan/belakang, atas/bawah, dan samping - Dimensi meja kerja: 600x320 mm - Penjepitan material - Daya motor: 2,2 kW - Dimensi (P/L/T): 950x740x1330 mm - Berat: 283 kg KEUNGGULAN – Produksi Polandia – Kondisi sangat baik – Mesin bor bekas Harga netto: 6300 PLN Harga netto: 1500 EUR dengan kurs 4,2 EUR Kljdpjyarazofx Ag Rop (Harga dapat berubah seiring fluktuasi nilai tukar yang signifikan)

Kondisi: baik (bekas), Kode: 0405 Merek: VITAP - ITALIA Model: ALFA 21 Kedpfxsyrrhie Ag Rolp Mesin bor multi-spindle untuk furnitur, dapur, furnitur kustom, furnitur kamar mandi, dan berbagai keperluan lainnya Data teknis: Jumlah spindle: 21 - Jarak antar pusat mm 32 Kedalaman bor maksimum mm 80 Dimensi meja mm 860 x 500 Putaran spindle 2800 rpm Daya motor 2,5 Hp Kepala miring 0-90° Tekanan kerja 6-8 atm Dimensi keseluruhan mm 950 x 800 x 1140 h Berat kg 300

Kondisi: bekas, Technical Details: Drilling capacity in steel (diameter): 28 mm Throat depth: 345 mm Drilling stroke: 190 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MK 4 Spindle speed: 50 - 1280 rpm / 4-step stepless Feed: 0.1; 0.2; 0.3 mm/rev, manual/automatic Distance spindle/table max.: 200 - 800 mm Table clamping surface: 450 x 600 mm Table rotation: 360° Table adjustment: vertical 600 mm Column diameter: Ø 160 mm Machine weight approx.: 273 kg Klsdpjyq Rpisfx Ag Rep Machine dimensions approx. LxWxH: 1.0 x 0.71 x 2.0 m Thread cutting by selectable right and left-hand rotation via foot switch and/or depth stop Table adjustment by handwheel Coolant system Machine vice Quick-change chuck Röhm Supra 3 - 16 mm Slight damage to the cover as seen.