Beli Melamin bekas (135)

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue pot with run-off function optional), HF end trimming station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated distance control for contactless activation of processing functions. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen. Machine length: 4,030 mm Dsdow I U Drepfx Aaqokl Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0 – 2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1,050 kg Options: • Surcharge for radius scraper unit with air blast device + extraction • Surcharge for flat scraper unit + extraction • Surcharge for buffing unit • EVA/PUR glue pot with run-off function • Surcharge for diamond tools, height = 65 mm for pre-milling unit • Riepe spraying system (anti-adhesive) at pre-milling unit • Riepe spraying system (cleaning spray before buffing unit) • Piping system with 90° bend + manual slide valve, mounted on the machine with D=200 mm Availability: short notice Location: Hochheim

Kondisi: baik (bekas), 0015 Dedpjvutm Isfx Aaqekl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak gerak sumbu Z: 500 mm, Rondcom 54-SD3 / ACCTEE PRO Form tester with steel device base, including air-cushioned, high-precision CNC rotary table and motorized Z-axis (Z=500mm), consisting of: Dkjdpfx Aaex Sckpeqjl Measuring unit E-RT-R531A Detector holder E-DT-R749A Stylus arm EM46000-S302 (diameter 1.6mm) Detector E-DT-R120A PCB for PC control, interface controller Basic software ACCTee PRO Roundness under MS WIN XP/7 Calibration sphere E-MG-R01A (roundness 0.05 μm) Tool and gauge block set with factory certificate (1.47mm and 1.49mm) Fuse (1A), operating manual, device inspection certificate CNC probe holder with projection height H=153 mm; projection depth T=65 mm; suitable for use with R44/54 SD/DX with detector E-DT-R120A Accretech description: E-DH-R770B Z220 HP Workstation G1 - HP Single Unit (CMT) Packaging - HP Z220 CMT 400W 90% Efficient chassis - Windows 7 Prof. 32/64bit OS - Intel Core i3-2120 3.3 3M 2C GT1 CPU - 4GB DDR3-1600 ECC (2x2GB) RAM - 500GB 7200 RPM SATA 6G 2nd HDD - ATI V4800, 1 GB RAM - Network interface - 16X SuperMulti DVDRW SATA 1st ODD 29-piece probe set for Rondcom Three-jaw chuck E-WJ-R01C FX subframe comfort version Rondcom 44/54 Table dimensions 1076x1076x810mm consisting of: Closed subframe with 4 mounting points for air springs, Steel subframe, color RAL 7035 Integrated granite plate 1000x630x100mm All wood elements melamine resin coated graphite black 3x side and rear cover plates 1x large wooden shelf with square cut-out + 1x insert shelf Intermediate wood floor 2x front doors wood+ additional adapter plates for option with higher load capacity due to heavy Z-column 1x monitor holder consisting of column and folding arm Integrated air spring system 4x membrane air springs BiAir 0.25-ED-LT, (natural frequency vertical approx. 2.5Hz) Load capacity at 6 bar 170 kg 4x GDR 0.25-LT 1x mechanical-pneumatic leveling system MPN-LCV, Resetting accuracy ±0.1 mm, 1x compressed air maintenance unit WFD-M, 4x leveling elements BNRS 70/4, (leveling range 750mm +/-30mm possible) 4x leveling screws M16 x 100 mm 1x complete assembly wood cladding elements

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (optional EVA-PUR glue pot with draining function), HF cut-off saw station, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated line control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer tape, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen • Automatic edge feeding for coil material via a rotatable coil plate D=800 mm • Two counter-rotating, demand-actuated pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free jointing of the workpieces before edge banding • Long infeed fence (650 mm) with support • Teflon-coated, quick-change glue pot with 1.5 kg capacity, drip-proof with bottom glue supply (excess glue is automatically returned to the reservoir), precise glue application by glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for extended periods but remains switched on). Optional: EVA/PUR glue pot with draining/cleaning function for quick color change • Automatic strip magazine (70 mm capacity) with spiked roller for wooden lippings. • Pressure zone consisting of a powered pressure roller synchronized with the glue roller and two smaller, counter-tapered, spring-loaded pressure rollers ensures optimal bonding of the edge material to the workpiece; digital counter for pressure zone adjustment. • High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure clean and accurate cuts, equipped with extraction hood • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with HM-WPL special cutters, suitable for radius, flush, and chamfer milling; horizontal and vertical workpiece tracing; unit adjustment with digital counters for adaptation to different edge types; 2 chip extraction hoods with central extraction ports 2 x Ø 100 mm; height adjustment of upper unit via top pressure. • Corner copying unit: Automatic processing of end edges up to 2 mm edging thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idling, activation/deactivation of units, and fault diagnostics; includes digital meter counter for edge material consumption. • LED interior lighting • Optional Riepe spraying systems for anti-stick, NFLY, and cleaning agents Dkjdpfxsd R U Agj Aaqel Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping action removes any milling marks left by radius cutters, ensuring a perfect finish.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR gluepot with discharge function optional), 2-motor HF cross-cut saw station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, integrated line control for contactless operation of machining functions as well as L-Motion control (18 axes). Suitable for ABS, PVC, melamine, and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece heights from 10 – 60 mm. • Automatic edge feed for coil material via rotatable coil plate D=800 mm • Infeed lineal (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood strips. Dsdpfx Ajf Tdwcsaqjkl • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointers ensure clean and tear-free jointing of workpieces before edging • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot), fine-adjustable glue application by glue roller, separate glue roller temperature setting, electronic temperature control with automatic stand-by function (prevents glue burning if the machine remains on but unused for a prolonged period). Optional: EVA/PUR gluepot with discharge and cleaning function for fast color change • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with pneumatic pressure, ensuring a good bond between edge material and workpiece; program-controlled edge thickness setting with L-Motion motor • High-frequency cross-cut saw equipped with two HF motors 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure clean, precise cutting, equipped with extraction hoods. Pneumatically pivotable from the control panel • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, 3 each L-Motion motors for positioning the horizontal tracing shoes, positioning the vertical tracing shoes, and positioning the multifunction tool. 2 chip extraction hoods, height adjustment of the upper unit with top pressure. • Corner copying unit: Automatic machining of end edges up to 3 mm edge thickness. Equipped with 2 high frequency motors 0.27 kW, switchable from the control panel. Option for single-sided (front or rear edge) or double-sided corner copying. 2 L-Motion motors each for positioning the horizontal tracing shoes and the tool. • Swiveling control panel with 10” color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, on/off for units and fault diagnostics, motorized top pressure, extensive program memory, plus full automatic operation control of machining units.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 67641340eaae2 Dodpfxed R U Acs Aaqekl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Kompact and flexible in the smallest spaces. Workpieces receive their finish in just 2.13 meters of machine length. Equipped with a 1.1 kW high-frequency motor jointing unit and diamond-tipped spiral jointing cutter, Teflon-coated glue station, pre-milling unit, and HF multifunctional milling unit, as well as 2 free stations for finishing units, such as a surface scraper or polishing unit. Simple operation via a 3.5" color touchscreen. ► Control system via 3.5-inch color touchscreen ► Jointing unit with 1.1 kW high-frequency motor and diamond-tipped spiral cutter running counter-rotationally for clean, tear-free jointing of workpieces before edge banding ► Teflon-coated glue pot with automatic standby function ► Automatic edge feed with roller table D = 600 mm for edge material in rolls as well as fixed lengths from 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressing of the applied edge ► HF multifunctional milling unit – suitable for radius and flush trimming of the longitudinal edge, as well as for front and rear edges of the workpiece, including vertical corner rounding ► 2 free stations for finishing units, e.g., surface scraper or buffing unit ► Workpiece chain feed with rubberized chain plates and double top pressure rollers ► Pressure beam with centralized adjustment and SIKO display ► Fixed workpiece support (optionally extendable support for large workpieces) ► 400 mm infeed fence with support ► LED lighting in the cabin (optional) ► Processing of workpieces from 10 to 45 mm thickness ► Feed speed 6.5 m/min ► Machine length 2130 mm Dodpfx Aaerrzkleqokl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 67641340e1af1 Dkodpfxol Rix Ne Aaqsl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, One-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA-PUR glue pot with drain function optional), HF end trimming station, HF routing unit, corner rounding unit, chain feed, double roller upper pressure, extendable workpiece support rail, and signal lamp for workpiece sequence. Suitable for ABS, PVC, melamine, and solid wood veneer edge rolls, as well as fixed lengths from 0.4 – 3.0 mm thick and workpiece heights from 8 – 50 mm. Feed speed: 7.0 m/min • 2 free spaces for finishing units • 10.0” color touchscreen. • Automatic edge feeding for roll material via rotatable roll holder D=600 mm • Infeed fence (400 mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean, tear-free jointing of workpieces before edge banding • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the glue pot), fine adjustable glue application by glue roller, separate glue roller temperature setting, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but left switched on). Optional: EVA/PUR glue pot with drain/cleaning function for rapid color change • Pre-cutting shear for roll material up to 3 mm edge thickness • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable spring-loaded pressure roller, ensuring good joint quality between the edge material and workpiece; mechanical SIKO indicator for pressure zone adjustment Dedod R U Adspfx Aaqjkl • High-frequency end trim saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean, precise cut, equipped with extraction hood • High-frequency combination routing station, 2 powerful 0.27 kW HF motors with HM-WPL special cutters, suitable for radius and bevel trimming, horizontal and vertical scanning of the workpiece, unit adjustment with digital counters for different edge types, 2 chip extraction hoods with central extraction connectors 2 x Ø 100 mm, height adjustment for the upper unit via upper pressure adjustment • Corner rounding unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, can be activated from the control panel. Optionally single-sided (front or rear edge) or double-sided corner rounding • Rotatable control panel with 10.0” color touchscreen controls glue temperature settings, automatic temperature reduction when not in use, on/off control for units, and error diagnostics • LED lighting inside the cabin • Riepe spray systems for anti-adhesive or cleaning agent available as options Optional finishing units (2 slots available): • Radius scraper unit – Light scraping cut removes possible marks from radius cutters for a perfect finish. Fine adjustment via digital counter. • Flat scraper unit – Gently scrapes glue residue from the workpiece surface at the glue joint • Buffing unit – 2 motors 0.05 kW, 1.50

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, BIESSE Edge Banding Machine AKRON 1440-A Dksdpfxoxzb Iio Aaqol Automatic single-sided edge banding machine for gluing and processing straight panel edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, knife-cut veneers, etc.) • NC control with touchscreen display • Automatic start of unit motors. • Direct selection for second pass. • Production data acquisition. • Software-guided maintenance. TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU unit (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material) (*): 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air: 7 bar Glue pot capacity: approx. 2 kg * Depending on selected units. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge material to the workpiece, automatically cuts the edge from the coil, and presses it onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming front and rear edge projections at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made from synthetic materials up to max. 3 mm thickness. PRE-MILLING UNIT RT02 Prepares the workpiece prior to glue application. Equipped with two 1.8 kW high-frequency motors running at 12,000 rpm. SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. GLUE JOINT SCRAPER RC02 Unit for removing excess adhesive in the transition area between the edge and the panel. Equipped with tracing rollers and a flat knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using cloth polishing wheels. The unit automatically adjusts to the workpiece thickness. ANTI-ADHESIVE SPRAY SYSTEM ADZ02 Precision application of anti-adhesive via injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing via: - controlled monitoring of the glue roller - automatic retraction at feed stop - automatic ON/OFF of the gluing unit REVERSE system for switching the glue roller between forward and reverse operation. Electrical and mechanical preparation for use of special glue pots for POLYURETHANE adhesive in machines configured for EVA glue. NC axis for the fine trimming unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface. Pair of multi-profile cutters for fine trimming unit: 25-degree chamfer cutter, R=2 mm + R=1 mm, and straight profile for solid wood. NC axis for the profile milling unit Kit for automatic setting of the sensor according to edge thickness. Adjustment is controlled via the operator interface. Function for corner-only processing NC axis for the scraper unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface.