Beli Mencuci Blok bekas (1.847)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 595 h, WWB200 SuperGrinder. Perfekte Maschine für Kebab-Fabriken, Wurst- und Burgerhersteller usw. Maschine von 2017, aber sie wurde nur 595 Stunden genutzt. Nodpfx Aowhagtebuskt

Kondisi: sangat baik (bekas), Horizontal baling press, 5000 mm length, 800 mm width, 12 cylinders, 5 hold-down devices. Nkedpfx Ael D T D Esbuot

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, The workshop parts washer is a versatile tool that should be included in every service centre, garage, or workshop. This indispensable device enables fast and cost-effective removal of contaminants. A major advantage is the possibility of operating the washer indoors. The enclosed parts washer ensures the effective removal of all types of contamination, from oils to hard-to-reach deposits, while guaranteeing safety and long-term component performance. The technology used ensures not only cleanliness but also protection against corrosion. Please note that cleaning results will depend on the detergents used. The parts washer is designed to hold up to 60 litres of cleaning fluid, with a maximum tank capacity of 80 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates at a flow rate of 10 to 12 litres per minute, allowing thorough cleaning of surfaces, including those with fine cracks, thanks to the powerful jet. The fluid is circulated from the bottom by the pump in a closed-loop system and delivered under pressure via a flexible hose. The workshop washer features four legs for stable operation and an optimised working height. The lid locks automatically when opened. The unit also includes a worktop located below the basin, which can be used to place washing accessories or cleaned parts for drying. The device requires self-assembly. Technical specifications: - Tank capacity: 80 L - Maximum pump capacity: 10-12 L/min - Power supply: 230 V - Dimensions: 775 x 540 x 915 mm - Internal dimensions: 710 x 480 x 260 mm - Shelf below basin: 700 x 420 mm - Power supply: 230 V - Weight: 23 kg Nksdpovugvvjfx Abuot Price does not apply to machines purchased in Poland.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit using a cleaning fluid. The agent is sprayed from the gun nozzle at a pressure of up to 8 Bar, allowing for thorough cleaning of hard-to-reach areas and heavily soiled parts contaminated with carbon deposits, grease, or oils. This washer is ideally suited for turbocharger reconditioning as well as cleaning heavily soiled parts made of steel, cast iron, aluminum, and other alloys. The washer’s lid is equipped with pneumatic actuators that enhance safety and the quality of work when using the washer. The cabinet is standard-equipped with work area lighting. The washer features a dual-function spray gun, which can dispense either only air or air mixed with the cleaning agent. The cleaned item can be dried with compressed air. Nsdpfxovugwmo Abujkt * Please note: The washer is supplied as a self-assembly kit. Technical specifications: Capacity: 160L Fluid tank capacity: 8-14 L Operating pressure: 5-8 bar Weight: 29 kg Air regulation Pneumatic spray gun Illuminated cabinet Work area ventilation Dimensions: 770x610x700mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, A high-quality stainless steel pressure cabin washer is a tool that sets new standards in cleaning performance. Engineered for professional applications, this washer delivers reliability, durability, and high efficiency. Nkjdpfxjuc Tpys Abuot Made from premium-grade stainless steel, it offers long-lasting resistance to environmental conditions, ensuring consistent performance even under the most demanding working environments. Device Description: Thanks to its robust stainless steel construction, our pressure cabin washer is highly resistant to corrosion and is designed for dependable operation in tough conditions. Equipped with advanced pressure washing technology, it effectively removes dirt, oil, grease, and other contaminants from various surfaces. Our pressure cabin washer is an essential tool for businesses that value cleanliness, efficiency, and reliability. It simplifies, speeds up, and optimizes cleaning tasks, leading to increased customer satisfaction and greater operational productivity. Cleaning takes place in a closed circuit, using a washing fluid heated up to 70°C. The solution is discharged through a gun nozzle under pressure up to 8 bar, which thoroughly cleans hard-to-reach areas and heavily soiled parts—from carbon deposits, greases, to oils. Both the elevated temperature and cleaning fluid enhance washing efficiency. The unit features adjustable feet and level settings. The washer is equipped with a dual-function gun—allowing the emission of either air alone or air mixed with detergent. This enables drying of cleaned items with compressed air after washing. Advantages of using the stainless steel pressure cabin washer: 1. Thanks to high water pressure combined with detergents, the washer effectively removes even the most stubborn contaminants like oil, grease, or rust, resulting in clean and shiny surfaces. 2. The cabin washer enables fast and efficient cleaning of larger surfaces in less time compared to traditional manual cleaning methods. 3. With adjustable pressure settings, the washer can be tailored to different surface types and contamination levels, making it a versatile cleaning tool. 4. Made from high-quality stainless steel, the washer is resistant to corrosion and mechanical damage, ensuring long service life and reduced maintenance needs. 5. The cabin washer is user-friendly, allowing operators to quickly master its use and achieve professional results without lengthy training. 6. Rapid and effective cleaning boosts work efficiency, potentially leading to time and cost savings for businesses. Investing in a stainless steel pressure cabin washer enhances not only cleanliness but also operational efficiency and equipment longevity, benefiting both companies and individual users. MP180 Washer Specifications: - Washer Capacity: 180 l - Frequency: 50 Hz - Weight: 56 kg - Voltage: 230 V - Height with legs: 1450 mm - Height without legs: 920 mm - Internal width: 740 mm - Internal height (with lid open): 410 mm - Internal depth: 500 mm - Load height: 360 mm - Load width: 700 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, A workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device allows for quick and cost-effective removal of contaminants. A significant advantage is the ability to operate the washer indoors. A cabinet parts washer ensures effective removal of all types of contamination, from oils to hard-to-reach residues, while providing both safety and long-term performance of the cleaned components. The applied technology guarantees not only cleanliness but also protection from corrosion. It should be noted that cleaning results will depend on the detergents used. The parts washer is designed to use up to 90 liters of cleaning agent, with a maximum tank capacity of 140 liters. For optimal performance, the pump inlet should be covered. The pump operates within a flow rate range of 2.7 to 3.6 liters per minute, enabling thorough cleaning of surfaces—even those with hairline cracks—thanks to a powerful jet. The cleaning fluid is drawn from the bottom in a closed-circuit system and delivered under pressure through a flexible hose. The workshop parts washer is equipped with 4 legs for stable operation and an optimized working height. The lid locks automatically when opened. The unit also features a work surface below the tub level, which can be used to place cleaning accessories or washed parts to let them dry. The machine requires self-assembly. Technical data: - Tank capacity: 140 L - Maximum detergent volume: 90 L - Maximum pump performance: 2.7–3.6 l/min - Power supply: 230 V - Dimensions: 1130x540x885 mm - Tray dimensions: 800x500 mm - Weight: 43 kg - Power supply: 230 V Self-assembly required. The listed price is NET price. Delivery costs are not included. Nodpfx Aerh Ey Rsbuskt For more information, please contact us by phone or email. We also invite you to visit our website to view our full offer.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, A workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. It is an indispensable device for fast and cost-effective removal of contaminants. A significant advantage is the ability to use the washer indoors. The cleaning process operates in a closed circuit, using a cleaning fluid heated up to 70°C. The agent is dispensed from the gun nozzle at a pressure of up to 8 bar, ensuring thorough cleaning of hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oils. Both temperature and fluid enhance cleaning efficiency. The washer is equipped with adjustable feet and a leveling function. This washer is highly effective for turbocharger reconditioning and for cleaning heavily soiled parts made from steel, cast iron, aluminum, and other alloys. The washer’s lid is fitted with pneumatic lifts to increase safety and the quality of operation. The device features a dual-function gun which can dispense either air only or air mixed with cleaning fluid. Cleaned parts can be dried with compressed air. The washer comes with an intuitive control panel, adjustable water temperature, smooth air pressure regulation, a pressure gauge, a separate switch for heating the washing fluid/water, and a separate switch for power supply. Technical specifications: - Capacity: 160 L - Detergent heating up to 70°C - Tub fluid capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg - Dimensions: 770 x 600 x 1330 mm Nedpfxsuc Tn Ao Abuskt - Adjustable air flow - Pneumatic spray gun - Illuminated cabin - Ventilation Please note: The washer is delivered as a self-assembly kit. Price does not apply to machines purchased in Poland.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, Pabrikan: VBJX Model: VBTW-300 Tahun Pembuatan: Mei 2025 Dimensi: 3 m x 1,5 m x 1,65 m Nkjdpfoyab A Eex Abust Sebelumnya digunakan untuk baki roti.

Tahun pembuatan: 2008, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, en_Bio-Circle Parts Cleaner 2 units available For active environmental protection Color: green/grey The ultimate cleaning workbench – the parts cleaner is in good used condition. Protective base made of stainless steel perforated sheet The Bio-Circle wash table – cleaner, compact wash table, circulates the cleaning fluid using an electrically powered pump to a 3-way valve. Depending on the position of the 3-way valve, the cleaner can be dispensed through the hose with washing brush, including shelf tray for workspace with a flexible hose, or both onto the table. Operated with Bio Circle L Liquid, the container inside the parts washer biologically decomposes contaminants in the used cleaning fluid—such as cleaned off oil/grease—via microorganisms, as described in the operating manual for Bio-Chem Surface Technology. Nkedpfx Aefhdnbebuet The used or dirty parts, as well as brushes to be cleaned for a natural, biological parts cleaning process, are serviced by an integrated heater, pump, aeration, and filtration system, and have been regularly maintained. The magnet in the drain strainer retains steel particles. The parts cleaning unit is fully functional and in good condition. Environmental protection through eco-friendly cleaning. Dimensions: Parts cleaner H 1120 x W900 x D600 mm, weight 45 kg. Viewing under power is possible by prior appointment. Price/details upon request. All technical data subject to errors or typographical mistakes. We sell exclusively to countries within the European Community.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025, masa garansi: 12 bulan, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 12/2026, panjang total: 700 mm, lebar total: 600 mm, tinggi total: 850 mm, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, daya: 6,7 kW (9,11 hp), sekring listrik: 16 A, de-to-hu-it-lt-001 Nsdpfefffhwsx Abujkt

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, Mesin pencuci panci double wall GGM Gastro TSS 66, tahun produksi 2023, dilengkapi pompa pembersih dan pembilas, tinggi masuk 860mm, dimensi PxLxT 855x820x2160mm, ukuran keranjang 665x665mm, No. seri 023009144, berfungsi dengan baik. Nkedpfex Tpn Rox Abujt

Kondisi: hampir baru (bekas), Wasch brushes for Lenhardt glass washing machine 2.3m; Stock: 8 units; Newly rebrushed roller brushes for Lenhardt / Bystronic glass washing machine, 2.3m washing height. Nedpjuig Ebefx Abuekt

Kondisi: baik (bekas), Directional control valve, solenoid valve, hydraulic valve, pressure valve, valve manifold, control block, control unit, control valve, directional spool valve -Manufacturer: Omal, control block -Angle seat valve: Type NA -Shut-off valve: Type VIP -Individual components: see photos -Price/sale: complete -Overall dimensions: 250/140/H125 mm -Weight: 1.7 kg Nkedpovrdgtsfx Abuet

Kondisi: baru, Blade Block / Distributor Block for Siemens SWT-3.6-107 Onshore For sale are four new, unused Siemens blade blocks / distributor blocks, type ZCH 565227, suitable for Siemens onshore wind turbines in the 2–4 MW power range, including the SWT-3.6-107. The Siemens ZCH 565227 is a central hydraulic module of the pitch system, responsible for the precise and rapid adjustment of the rotor blade pitch angle. As such, this assembly is a safety- and performance-critical key component, significantly contributing to yield optimization, load control, and operational reliability of the wind turbine. As a hydraulic distributor block, the component is fully integrated into the control architecture of the system and communicates directly with the master control system. Due to the high mechanical and hydraulic loads involved, only genuine OEM parts with the highest manufacturing and engineering quality are used here. The ZCH 565227 model is deployed in several current Siemens wind turbine models and is considered a critical component for avoiding unplanned downtime. Key technical data: • Manufacturer: Siemens • Type/Part number: ZCH 565227 • Designation: Blade Block / Distributor Block • Application: Pitch system • Units: incl. Siemens SWT-3.6-107 Onshore • Power class: approx. 2–4 MW Condition & Scope of Delivery • Condition: New, unused, original packaging • Availability: 4 units available immediately • Delivery: Europe-wide shipping possible These blade blocks are suitable as strategic spare parts, ensuring system availability, or for planned maintenance operations. For technical inquiries, serial number matching, or expedited processing, feel free to contact us. Nodox Tftispfx Abuekt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, 885 USED dishwashers for retail outlets. Nkedjuavwbepfx Abujt Manufacturers: Meiko, Winterhalter, Hobart. For more information, please contact us by phone or email. The unit is available for inspection at our warehouse (36-068 Bachórz, Poland). Available paid options: refurbishment / transport / installation / commissioning. The listed price is net, per unit. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. We also stock a large selection of bakery ovens: deck ovens, rotary ovens, gas, oil, and electric ovens from various manufacturers. We also offer bakery machines, bakery equipment, bun lines, and bread lines. To view our full and up-to-date offer, visit our Bakeres profile.

Kondisi: baik (bekas), en Njdpjt Ig Rvsfx Abuekt

Kondisi: baik (bekas), Tahun pembuatan: 2018, 790 USED VELOX bakery basket washer for baskets and trays. The machine is operational and has undergone an inspection. Year of manufacture: 2018 EXTERNAL DIMENSIONS (in cm): - width: 237 - depth: 190 - height: 330 Nkedpfx Astrmmzobuet The machine is available for viewing at our warehouse (36-068 Bachórz, Poland). Paid options available: transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, Mesin pencuci dan pengering kaca vertikal CE Glass 1600mm. Mesin telah dirawat, diperiksa, dan siap langsung digunakan. Karet penarik air baru, bearing baru. Arah kerja: dari kanan ke kiri. Maksimum tinggi kaca yang dapat dicuci: 1600mm. Jumlah sikat: 4. Kipas pengering. Kabin stainless steel. Pemanas air. Pencahayaan latar. Sensor penghenti. Mesin sepenuhnya telah diperiksa, dibersihkan, dan dapat dilihat dalam kondisi kerja sempurna di lokasi kami! Njdpfx Abox Tblnsujkt

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin pencuci piring Hobart UX 30 EB Mesin pencuci universal Model Hobart: UX 30 EB 3 program pencucian Sistem filter cairan Genius X Nkodjxp Ug Iopfx Abuot Pompa cairan Konsep Easy Clean 3 program 1 keranjang pencuci Koneksi: 400 V, steker 32A-CEE Dimensi: 780 x 820 x 1980 mm (PxLxT) Mesin bekas Opsi: Filter air Kontrak perawatan Paket servis Layanan pengiriman Pelatihan & commissioning Kami memiliki banyak mesin pencuci piring lain dalam stok!

Kondisi: baik (bekas), Leutenegger (Starrag) Washing Booth Technical Specifications Bath capacity: approx. 0.9 m³ Nkedpfxod Nlybe Abuet Chemical: Henkel P 3 Voltage: 3x400V/230V 50 Hz Power supply: 40 A Control voltage: 24 V DC Max. temperature: 50° C Electric heating Heating output: 3x3.25 kW = 9.75 kW Work pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m³/h Shipping costs on request You can find more items – new and used – in our shop! International shipping costs on request

Tahun pembuatan: 2026, Kondisi: baru, nomor mesin/kendaraan: 1234, Used for collecting mash prior to the packaging process. With the buffering option, the entire system can operate continuously without interruption, independent of the packaging machine. - Capacity: 600 L - Material: Wnr. 1.4301, AISI 304 stainless steel - Weight: 80 kg - Equipped with floating lid - Level indicator Dimensions: Nkjdpfxoiu Hy Te Abuet D - Diameter: 565 mm H - Total height: 1095 mm h1 - Tank height without legs: 845 mm h2 - Leg height: 250 mm

Tahun pembuatan: 2026, Kondisi: baru, The fruits are transferred from the sorting table to the washing tank and then conveyed to the washing brushes, where the first cleaning stage begins. Using the conveyor belt, the fruits are moved under a fresh-water spray to the swiveling grater mill, where the fruit or vegetables are processed to the desired consistency. Thanks to the swiveling grater mill, the system can also be used as a pure washing and conveying unit without modification. Technical Data: Nsdpfx Abod Aqnfeuokt • Nominal capacity: 1500–2000 kg/h • Power requirement: 4 kW, 400 V, 16 A, three-phase • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 950 x 3160 x 2000 mm • Discharge height: 1250 mm • Weight: 275 kg • Washing tank water capacity: 280 L/shift • Water consumption: 100–200 L/h (depending on settings) • Water connection: ¾” quick coupling • IP65 electronic control panel • Machine in compliance with EU guidelines • Minimal maintenance required • Continuously adjustable belt speed • Easy to operate • Effortless to clean • Adjustable machine feet • Swiveling grater mill • Noise emission: 60–70 dB • Equipped with 4 counter-rotating brushes for intensive washing Optional: • Various sieve inserts for the grater mill • Stop&Go system for automatic control between belt press and washing/milling unit • Dosing attachment for pack presses Also available without fruit pulper!

Tahun pembuatan: 2026, Kondisi: baru, The fruit is conveyed from the sorting table into the washing tank, where the initial cleaning phase begins. Using the conveyor belt, the fruit is transported under the fresh water spray to the desired location for further processing. Technical data: • Rated capacity: 3,000 kg/h • Power requirement: 0.75 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 750 x 2,100 x 2,800 mm • Discharge height: 1,820 mm • Weight: 135 kg • Washing tank water capacity: 280 L • Water consumption: 20–100 L/h (depending on settings) • Water connection: ¾” quick coupling • IP65-rated electrical controls • Machine compliant with EU directives • Minimal maintenance required • Continuously variable belt speed • Easy to operate Nkedpefd E Trefx Abuot • Effortless to clean • Swivel castors with brakes

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), jenis bahan bakar: listrik, Tahun pembuatan: 2026, YM 1240 Mobile Screening and Washing Plant General Makina’s Washing and Screening Plant has been engineered for operational simplicity, integrating all processes into a single system—a result of 35 years of industry expertise. With its unified mechanism, the unit can be fully operational and ready for use within 30 minutes. Our mobile screening and washing plants remain the preferred choice among our machinery portfolio. Optional Features: Njdpfx Aswhmx Aobuskt - Crawler Chassis with Remote Control Operation - Imported Woven Wire Screens and Tensioning Device - Adjustable Speed Conveyor Belt - Diesel Generator Set Certified to ISO 9001 and CE standards, the General Makina Washing and Screening Plant is manufactured for both domestic and international markets.

Kondisi: baru, Tahun pembuatan: 2026, de-to-it-lt-lv-0001 Nedpfjukpnvsx Abuekt