Beli Pencuci Botol bekas (1.270)

Kondisi: bekas, Tahun pembuatan: 1998, Overview  This bottle washing machine was manufactured in 1998 by the German company PAC. The model CB 14-0.5L-R-7 LII Compact is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures efficient cleaning via a multi-stage process involving caustic and hot water baths. The machine has 14,175 operating hours and is in good condition. Technical Specifications  Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 - 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment duration: 11.65 minutes Bottle formats: Up to Euro-NRW Number of bottle rows per carrier: 14 Bottles in the machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot caustic 8.96 seconds Caustic II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Consumption Water consumption: 3.25 - 3.38 m³/h at 60°C Power connection: 12.0 - 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Frame width: 1,725 mm Height: 2,300 mm Gjdpsxn A S Nsfx Adqsuh

Kondisi: bekas, Tahun pembuatan: 2007, Overview The bottle washing machine was previously used in a brewery in Germany. Due to consistent and thorough maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine is still installed and in operation. It is being replaced only because higher line speeds are required, even though it remains in excellent condition. Technical specifications: - Rated capacity: 13,000 bph (based on 1.0L mineral water bottles, format: 89 x 310 mm, weight: 600g) - Total number of bottle pockets: 3,240 units - Pockets per basket row: 18 units - Pocket pitch: 110 mm - Chain pitch: 169 mm Treatment times: - Total treatment time: 14.95 min - Total immersion time: 7.56 min - Lye immersion time: 6.73 min - Lye filling time: 7.73 min - Lye contact time: 7.89 min - Total internal spraying time: 70 seconds - Total external spraying time: 25 seconds Dimensions: - Casing (L x W x H): 8,530 x 2,300 x 2,990 mm - Overall dimensions (L x W x H): 8,880 x 4,200 x 3,330 mm - CE certified - Chemical dosing pumps included - Machine data sheet included Guodpfx Asxbr Slodqsh - Rotary tube spraying system - Single-end machine - Label discharge at rear left - Label press included - Finger discharge & finger feed - Plastic bottle pockets - Complete machine frame made of stainless steel - Steam extraction

Kondisi: bekas, Tahun pembuatan: 1999, Overview The bottle washing machine was previously used in a brewery. Thanks to a complete overhaul in 2005 and ongoing maintenance, the machine is in excellent condition. All tanks and the machine frame are made of stainless steel. The machine is already dismantled and stored dry, making it easy to load and transport. Technical Data: Capacity: 6,700 bph Cell Pitch: 102 mm Gsdowg E D Ijpfx Adqjuh Bottles per Row: 10 Dimensions & Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready to operate with additional components: 7,790 x 3,450 x 2,950 mm / 20,000 kg Year of Manufacture: 1999 Formats: 0.33 l, 0.5 l Machine Details / Features: Steam heated Pre-cleaning and removal of residual liquids via pulsed rinsing before washing CE-certified Chemical dosing pumps Machine data sheet included High-pressure pre-rinse Rotating spray nozzles Single-end machine Label ejection rear right Finger infeed/outfeed Bottle holders made of plastic Concentration measurement for NaOH storage liquid Spindles in stainless steel 24 Volt control voltage Siemens S7 control system Regularly maintained Complete machine frame in stainless steel Exhaust air extraction Machine dismantled, ready for shipping Automated machine start (heating, etc.)

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, kecepatan rotasi (maks.): 3.500 rpm, 2 dekanter identik Tipe: D4LP30HB, diameter nominal: 430 mm, penggerak listrik 37 kW, termasuk pompa eksentrik sekrup ALLWEILER, termasuk lemari kontrol Gsdpfoxnzwkox Adqsuh

Kondisi: baik (bekas), Data teknis ditampilkan pada gambar. Gusdpfxsxnbdwo Adqoh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, suhu: 60 °C, kapasitas angkut: 250 kg, SUMMA DC3/OSK rotary basket – rotary drum cleaning system, carousel degreasing unit with dryer The chamber rotation machine from the Czech manufacturer operates on a pressure spray principle. The degreasing system offers three surface cleaning combinations and is suitable for surface degreasing of a wide variety of materials. Guodpfjwty H Dox Adqsh Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770 x 500 mm Max. workpiece weight: 250 kg Electrical power: 23 kW Bath temperature: max. 60 °C Air temperature: max. 120 °C Bath heating (rinsing): 12/6 kW Hot air drying: 13.5 kW Aerosol pressure: 0.28 MPa Pump capacity: 70 litres/minute Machine weight: 520 kg Machine dimensions: 1800 x 1800 mm Height: 1500 mm Do you need further information? We are happy to assist you! Please contact us via the contact form or give us a call. This listing was automatically translated. Translation errors may be possible.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 11/2026, Mesin Pencuci Piring Hobart FXLS Bäko-10B Model Hobart: FXLSBÄKO-10B Sistem keranjang ganda Pompa dosis untuk cairan pembilas dan deterjen Ruang dalam ekstra dalam untuk loyang 600 x 400 mm Termasuk pelembut air terpasang Aksesori yang termasuk: 1 keranjang piring, 1 keranjang universal Koneksi: 400 V, steker 16A-CEE Ukuran: 600 x 640 x 820/850 mm (PxLxT) Mesin bekas, sudah dibersihkan Dengan garansi dan layanan suku cadang Kualitas dari bengkel profesional! Manfaatkan pengalaman lebih dari 35 tahun! Opsi: Godpoxmq Trjfx Adqsuh Kontrak perawatan Layanan pengiriman Paket servis Bawah mesin Deterjen/pembilas E-Box untuk keamanan lebih Pelatihan & commissioning Kunjungi ruang pamer besar kami!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 50 h, nomor mesin/kendaraan: LW250*1000, Dekanterzentrifuge, Baujahr 2020, aber erst im Mai 2021 in Betrieb genommen! Die Maschine befindet sich in einem neuwertigen Zustand (insgesamt ca. 50 Betriebsstunden gelaufen)! Die Dekanterzentrifuge steht aufgrund eines Technologiewechsels zum Verkauf und funktioniert einwandfrei! Hersteller: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Baujahr: 2020 Seriennummer: LW250*1000 Gsdpepu A D Asfx Adqjuh Maschinensignal: 02-001 Dekanter-Kennnummer: 2647 Schlammförderkapazität des Dekanters: 500 kg/h Hauptmotorleistung: 7,5 kW Hilfsmotorleistung: 3 kW Durchsatzkapazität: 1–5 m³/h Nettogewicht des Dekanters: 1.000 kg Material der medienberührten Teile: 1.4404 Zuladungsvolumenstrom: 0,5–3 t/h Edelstahl Referenznummer: 2590

Kondisi: bekas, Gebrauchte Abfülllinie von TANG OG WEISS AS (DK) zur Verpackung von Flüssigkeiten in Kunststoffflaschen. Geeignet für Füllvolumina von 50 ml bis 750 ml. Leistungsdaten der Linie: - Für Flaschen mit 750 ml Volumen: bis zu 600 Stück/h - Für Flaschen im Bereich von 200 bis 400 ml: ca. 800–900 Stück/h - Für kleinere Flaschen ist eine Kapazität von etwa 1.000–1.200 Stück/h realistisch. Die Linie setzt sich aus folgenden Komponenten zusammen: - Flaschenzuführbehälter von PACKFEEDER S.L. (Spanien), Modell MN 100-4 - Füll- und Verschließeinheit von TANG OG WEISS AS (DK), Modell TWKS. Beinhaltet das Füllmodul TWRF mit zwei Füllventilen, einen Puffertank aus Edelstahl (Gesamtvolumen 15 l), Rundlauftisch, Verschlusszuführung, Verschließarm und Plattenförderer - Edelstahl-Drehkolbenpumpe von SSP PUMPS (England), Modell L2-0017, zur Förderung des Produkts in den Puffertank - Etikettiermaschine von EME Etiketteringsmaskiner ApS (Dänemark), Modell 4-120 (4000 Serie), ohne Drucker, ausgestattet mit Plattenförderer und zwei Selbstklebe-Etikettierstationen (Vorder- und Rückseite der Gebinde). Etikettenzuführungshöhe: 20–120 mm, -breite: 10–250 mm, Arbeitsgeschwindigkeit: 0–40 m/min - Automatische Folieneinschweißmaschine von SKINETTA PAC-SYSTEME GMBH & CO. (Deutschland), Modell ASK 450. Die Maschine umwickelt 6er-Packs mit Schrumpffolie und verschweißt/thermoformt sie. Einlauföffnung zur Schrumpfsektion: Breite 440 mm, Höhe 320 mm (Baujahr 1994, ohne Dokumentation) Gujdjxiv E Eopfx Adqoh - Plattenförderer und Steuerpulte Im Lieferumfang enthalten: Schrank mit Formatteilen für ovale Flaschen (Volumen 50, 200, 400, 750 ml), Herstellungsdokumentation in Dänisch und Bedienungsanleitung auf Polnisch. Baujahr der Linie: 2007.

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3221223, This is a brand-new, factory-stocked pass-through dishwasher from the premium manufacturer Winterhalter, model PT-XL Energy Plus. The XL hood format is ideally suited for bulky wash items and also for E2 transport crates. You will receive an invoice with VAT shown separately. The manufacturer's RRP for this configuration is €20,762.00 Condition: new Gjdjxlq Nqspfx Adqouh Technical data: Dimensions (W x D x H): 735 x 750 x 2175 mm Rack size: 500 x 500 mm & 500 x 600 mm Tank capacity: 35 liters Power supply: V: 400 / kW: 11.5 / Hz: 50 Type: PT-XL Energy Plus Year of manufacture: 2024 Weight: net / gross with EnergyPlus: 172 / 202 kg Serial number: 3221223 Additional information: Wash system The heart of the PT Series: Inside the machine, two S-shaped wash arms operate. Optimized flow and special nozzle geometry ensure comprehensive water coverage. This results in outstanding wash performance with rinse water usage starting from 2.2 liters per cycle. Premium quality is evident in every detail: Robust stainless steel shafts guarantee optimal rotation properties and contribute to the high reliability of the PT-XL. Variable wash pressure adjustment Every Winterhalter PT-XL comes standard with variable water pressure regulation: VarioPower adjusts the wash pressure precisely to the items and degree of soiling. Fine glasses and fragile bowls are washed with lower pressure, while robust dishware is cleaned with higher pressure. This ensures tough soiling is effectively removed, and delicate items are gently treated and securely held in place. Wastewater heat recovery A clear advantage of the PT Series: The EnergyLight wastewater heat recovery system comes as standard. The heat exchanger uses energy from the wastewater to preheat the incoming cold water. Benefits: Faster heating between wash cycles, conservation of resources, and up to 10% savings on energy costs. Exhaust air heat recovery The Winterhalter PT-XL Energy Plus includes exhaust air heat recovery. In addition to the standard wastewater heat recovery, an exhaust air heat exchanger is used. It utilizes the energy from warm water vapor inside the machine to preheat the incoming cold water. When the machine is opened, little warm, humid vapor escapes into the room. Up to 15% in energy costs can be saved per cycle. Usable pass-through height: 564 mm Working height: 850 mm Tank temperature: 55 to max. 69°C depending on software Circulation pump: 0.95 kW Wash pump: 1.5 kW Tank heater: 2.5 kW Our used equipment service for you: Full factory warranty High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional – or your money back Flexible shipping or self-collection Expert advice – before and after purchase Provision of operating manuals, wiring diagrams & spare parts Inspection according to DGUV V3 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by agreement

Kondisi: bekas, Tahun pembuatan: 2013, Overview The Heuft InLine IR – High-Speed Empty Bottle Inspector is distinguished by its compact installation dimensions. High-speed inspection of empty bottles is easily achievable (up to 50,000 bottles/h). It is capable of performing all standard inspections (sidewall inspection, infeed inspection, finish inspection, base inspection, outfeed inspection, HF caustic and IR residual liquid detection). Additionally, it features a separate module for foreign bottle detection (height, contour, color). In 2016, it was overhauled and modified, including the integration of conveyor control. Gedpfx Asukafrodqouh Technical Data: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions - Overhauled and modified in 2016 Features: - Performs all standard inspections: sidewall, infeed, finish, base, outfeed, HF caustic, and IR residual liquid detection - Separate module for foreign bottle detection (height, contour, color)

Kondisi: hampir baru (bekas), da-H-10707-Komplet aseptisk UHT-flaskeanlæg Gsdpfx Adepmtb Ueqouh Ikke-kulsyreholdigt aseptisk UHT-flaskeanlæg til drikkevarer Nøglefunktioner: Kvalitetssikring: Bygget i rustfrit stål af høj kvalitet (316L) for maksimal holdbarhed og hygiejne. Rengøring: Udstyret med integreret CIP-system for nem rengøring. Styring: Fuldt PLC-styret med mulighed for individuel tilpasning. Driftsstatus: Anlægget er i drift og kan afprøves. Produktudvalg: - Vitamindrikke - Filtrerede/low-fiber juicer - Tebaserede drikke (brygget på ægte teblade) - Plantebaserede drikke/mælk Tekniske data: Kapacitet: 2.500 flasker i timen (bph) Flaskestørrelse: 0,2 l til 1,5 l (standard: 0,5 l pt.) Lukning: 28 PCO 1810 (mulig konvertering til 1881 med få tekniske ændringer) Tekniske parametre: - Bemanding: Kun 3 personer pr. skift nødvendig for fuld drift - Fyldekapacitet: 900 - 1.200 liter i timen - Holdbarhed: 24 måneder uden konserveringsmidler for iste, takket være UHT-teknologi og specialiseret desinfektions-/skyllesystem - Flasketemperaturområde: 5-40 °C - Varmbehandling: Sterilisering ved 60-150 °C (UHT) i 45 sekunder Følgende maskiner er inkluderet: - Fulautomatisk, PLC-styret UHT pladevarmeveksler/sterilisator (rustfrit stål 316L) inkl. varme- og køleudstyr: Kapacitet 1.250 l/t, PLC-styring, sterilisering (hovedkomponenter: 3 stk. AlfaLaval varmevekslere, Galletti køler, el-termooliekedel) Temperatur: 60°C - 138°C, holdetid: 45 sek., indløbstemp.: 15°C, udløbstemp.: 5°C - 35°C - Fulautomatisk aseptisk skylle-fylde-lukke 3-i-1 monoblok med tomflaske-sterilisering (3.000 BPH): Fyldekapacitet: 2.500 BPH, PLC-touchskærm styrer hele processen, automatisk flaskesterilisator, automatisk kapselsterilisator, pick-and-place-lukkesystem, CIP-vaskerhoved med tilslutning, Prominent Ozone Generator Dette tilbud omfatter IKKE yderligere udstyr såsom tanke, etiketteringsmaskine, flaskeblæsestation, pakkemaskine mv. Større flasker kan håndteres med mindre tilpasning. Oplys ønsket flaskestørrelse, så undersøger jeg mulighederne.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Basket Washer MRS - WASH 1200 Gedpfx Adsxnlpdeqouh Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotating basket powered by a motor and spray nozzles. Operating Description: After switching on the device with the main switch, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The first stage is the main wash, and its duration can be smoothly adjusted with a timer switch located in the control box. After the preset time elapses, the washing cycle is completed. STANDARD EQUIPMENT OF THE WASHER: * Lid-interlock sensor to stop operation if the lid is opened during washing * Tank liquid level sensor to prevent dry operation * Temperature sensor * Single spray arm * Mechanically driven rotating basket * Dual-stage filtration system * Coarse insoluble contaminant filter (1mm mesh filter) * Drain valve Technical Data: Basket diameter: 1200 mm Working height: 500 mm Basket load capacity: 300 kg Working time programming: 0–99 min Washing temperature: 60°C Heater power: 12 kW Tank capacity: 400 l Spray rate: 200 l/min Spray operating pressure: 4.5 bar Overall width: 1750 mm Overall depth: 1750 mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V WE ALSO OFFER OTHER MODELS OF AUTOMATIC BASKET WASHERS MRS WASH IN SIZES 800, 1000, 1200, 1500 AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Kondisi: baik (bekas), Trommeldrehzahl: 5.500 U/min Gusdpfx Adju Rr Iyjqsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, 890 USED Hobart Dishwasher. We have 2 units available. EXTERNAL DIMENSIONS (in cm): Gusdpfxjtxbl Rj Adqoh - width: 60 - depth: 60 - height: 82 INTERNAL DIMENSIONS (in cm): - width: 50 - depth: 50 - height: 42 The device is ready for inspection and is located in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / installation / commissioning. The given price is net, per unit. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Here is a professional English technical translation tailored for platforms like Machineseeker and TruckScout24: Offered for sale is a universal dishwasher/hood-type passthrough machine manufactured by Hobart, model UXTHL 10A/SEF. Featuring an increased pass-through height of 880mm, this unit is ideally suited for large trayware such as shop baking sheets (800 x 400 mm, upright) and, for example, allows multiple baker’s racks to be washed simultaneously. Its versatility for handling large wash items makes it particularly attractive for bakeries, butcher shops, and caterers. The automatic hood lift is a significant advantage—your staff will appreciate the ergonomic benefit. The machine is equipped with a sturdy inlet table, a new overhead spray unit, a spacious wash basin, and a closed base. The entire warewashing system has been thoroughly refurbished in our in-house workshop and is supplied with a 6-month warranty covering all electrical components. Included in the offer is the Hobart water softener (as shown) suitable for use with this machine. You will receive a VAT invoice. Condition: used, refurbished, fully operational Features: - VISIOTRONIC control: Single-button operation with remaining cycle time display, featuring a text and graphic user interface. - SENSO-ACTIVE resource management: The control continuously monitors the soil level in the tank and optimizes the rinse water volume in real time according to the degree of contamination. - POWER wash: Guarantees the removal of even the most stubborn residues with increased washing pressure. - Increased pass-through height - Capacity: up to 30 racks/hour, 120 x 1/1 GN pans/hour, 90 E-series crates/hour - 5 automatic programs: Short, Standard, Intensive, Hygiene, and Continuous wash - Program durations: 120 / 240 / 360 seconds, plus special programs - Tank volume: 130 liters - Basket size: 1240 x 700 mm - Loading height: 880 mm - Multi Setting: Heater output can be reduced when connected to an on-site hot water supply. - Filter contamination sensor - Detergent/rinse aid level indicator - Hygiene program - Completely ready for installation: supply and drain hoses, power cable, liquid detergent/rinse aid dosing pumps, rinse pump, drain pump, backflow preventer - Tank, rack, wash arms, and housing made of CrNi steel 1.4301 Technical Data: - Hood-type dishwasher (W x D x H): approx. 1447 x 936 x 1984 mm Gjdpfx Ajxhdh Esdqjuh - with hood open: 2900 mm - Right-hand inlet table: 1450 x 900 x 920 mm (sink 800x600x300mm) - Total length dishwasher + inlet table: 2850 mm - Electrical connection: V: 400 / kW: 21.6 / Hz: 50 - Year of manufacture: 2018 - Weight: approx. 500 kg - Serial number: 866414070 Our Used Equipment Service for You: - 6 months warranty on all electrical components - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully operational – or your money back - Flexible shipping or self-collection options - Competent advice – before and after the purchase - Provision of operating manuals, wiring diagrams & spare parts - Inspected according to DGUV V3 Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or want to inspect the equipment on site? You can reach us by phone during our business hours: Monday-Friday 09:00 – 13:00 and 14:00 – 17:00. Sale is conducted exclusively under our General Terms

Kondisi: sangat baik (bekas), Lot kolektif yang terdiri dari: Guedpfxsxnc Epe Adqsh - Sistem Isi/Tutup Fillber Monoblock RVOL.TVP 32-8 OMS (dengan pengganti tutup) dengan PLC Siemens - Posimat Master-15 Mesin Pengurai Botol, SMF Dumper DRH 310 dengan Elevator Pemuat Posimat - Mesin Shrink Wrap Overlap SMIPACK XP650 ARX-VS dengan Sistem Kontrol FLXMOD - Sistem Pelabelan Kecepatan Tinggi Epackaging Saturno 1T - Sistem Konveyor Kustom ASMECH dengan Travelator & Unit Pemilah Botol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Automatic Capping Production Line – Siemens HMI Control For sale: a complete industrial line for automating production processes – designed for capping products in cylindrical containers. The machine is in excellent technical condition, fully equipped with control systems, drives, and industrial automation. Technical data and equipment: • Controller and operator panel: Siemens SIMATIC HMI (touch screen) • Additional control panel: GTP-260 with function buttons and display • Drives: 2 electric motors with gearboxes (variable speed control) • Pneumatic systems: actuators, valves, distributors, pressure regulator – complete working set • Conveyor belt: with adjustable guides, plastic mesh belt • Sensors and product position monitoring system • Emergency safety stop switch (STOP) • Robust construction made of stainless steel and aluminium • Power supply: 400 V Godpfexl Rp Rox Adqouh • Dimensions: length approx. 2.15 m, width approx. 0.7 m, height approx. 1.6 m Applications: This machine is ideal for: • bottle, jar, and tube capping lines, • packaging process automation. Condition: Complete unit, dismantled from an operating production line. Requires minimal setup – simply connect power and compressed air and configure for your process. Professional-grade equipment, designed for continuous operation in industrial environments.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, lebar total: 1.750 mm, panjang total: 1.750 mm, tinggi total: 1.700 mm, jenis arus masuk: tiga fasa, The HYDRO WASH 1200 2-in-1 automatic spray washer is a multifunctional device, enabling fully automated cleaning of parts in a motor-driven rotary basket, or—for more complex shaped parts—high-pressure cleaning at 140 bar. Thanks to this combination of processes, it can be confidently stated that this machine is suitable for any workshop. It is perfectly suited for companies specializing in the reconditioning of turbochargers, steering racks, as well as gearboxes. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors have been applied. Operating principle: Before first use, fill the tank with cleaning fluid. The recommended solution is a mixture of MRS Cleaner Strong concentrate and water, in the specified ratio. The Hydro Wash cleaner allows both manual and automatic washing. a) To start automatic washing, prepare the machine (fill with water and concentrate), close the metal glove guard, close the washer lid by simultaneously pressing and holding two buttons (front and rear of the device), and press the start button. *Basket rotation is possible with the lid open—by pressing the right button on the foot pedal, or simultaneously pressing both buttons (front and rear of the device), provided the metal glove guard is closed. b) To start manual washing, close the washer lid by simultaneously pressing and holding both buttons (front and rear). Open the metal glove guard and press the left button on the foot pedal. STANDARD EQUIPMENT: - Lid disengagement sensor activated when the lid is opened during washing, - Tank liquid-level sensor, preventing dry operation, - Fluid temperature sensor, - Adjustable spray arms with nozzles from the renowned Spraying System manufacturer, made of stainless steel, - Mechanically driven rotary basket, - 140 bar high-pressure pump, - Compressed air gun, - Air pressure reducer with integrated water separator, - Coarse particulate filter (mesh size 0.8mm), - Fine particulate filter, - Adjustable feet, - Drain valve, - Pneumatic actuators. Technical specifications: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Work time programming: 0–99min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray capacity: 200l/min - Spray operating pressure: 4.5–6bar - Manual wash pressure: 140bar - Total width: 1750mm - Total depth: 1750mm - Total height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional extras: - Belt-type oil separator - Low-pressure lance kit Godpjxm Ullofx Adqsuh - Reinforced pump OUR PRODUCT RANGE ALSO INCLUDES HYDRO WASH 2-IN-1 WASHERS IN OTHER SIZES. WE ALSO OFFER 800 AND 1000 MODELS. CONTACT US FOR INFORMATION ON OTHER MODELS.

Kondisi: siap digunakan (bekas), De 2004. Bandbreite 25 cm. Komplett und einsatzbereit. Gedpfx Adsvrqy Hjqjuh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Mesin cuci kaca vertikal LISEC VHW-33/V8 Tahun pembuatan: 2012 Gsdpfx Asw U S Axedqjuh Ketinggian kerja maksimum: 3300 mm Arah kerja: dari kanan ke kiri 8 sikat Dalam kondisi sangat baik dan bersih Kondisi kerja bagus, telah diuji Dijual apa adanya Tersedia segera

Kondisi: bekas, Tahun pembuatan: 2019, Summary This returnable glass bottle filling line was installed in 2019 and essentially consists of a bottle washer, rinser/filler/capper block, and a labelling system with a laser printer. The line is available because the previous owner is closing the brewery due to retirement. The filling line was operating flawlessly until the end. The equipment remains installed and connected, and can be inspected in person at any time. Technical Details Capacity: max. 1,500 bottles/h (operated at 1,000 bottles/h) Filled product: Beer Included formats: 0.33l Longneck, 0.5l NRW Godpexgfr Njfx Adqsuh Closure type: Crown cap Scope of Delivery - Bottle washer | SEN | 1989 (refurbished and installed in 2020) - Isobaric filler block | Shandong Yuesheng | 2019 - Rinsing stations: 14 - Filling stations: 12 - Capping stations: 5 - With pre-evacuation - Counter-pressure filler incl. 2 formats: 0.33l Longneck, 0.5l NRW - Drying tunnel | Shandong Yuesheng | 2019 - Labeller incl. laser printer - Collection table

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, A workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. It is an indispensable device for fast and cost-effective removal of contaminants. A significant advantage is the ability to use the washer indoors. The cleaning process operates in a closed circuit, using a cleaning fluid heated up to 70°C. The agent is dispensed from the gun nozzle at a pressure of up to 8 bar, ensuring thorough cleaning of hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oils. Both temperature and fluid enhance cleaning efficiency. The washer is equipped with adjustable feet and a leveling function. This washer is highly effective for turbocharger reconditioning and for cleaning heavily soiled parts made from steel, cast iron, aluminum, and other alloys. The washer’s lid is fitted with pneumatic lifts to increase safety and the quality of operation. The device features a dual-function gun which can dispense either air only or air mixed with cleaning fluid. Cleaned parts can be dried with compressed air. The washer comes with an intuitive control panel, adjustable water temperature, smooth air pressure regulation, a pressure gauge, a separate switch for heating the washing fluid/water, and a separate switch for power supply. Technical specifications: - Capacity: 160 L Guedpfeuc Tn Ajx Adqjh - Detergent heating up to 70°C - Tub fluid capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg - Dimensions: 770 x 600 x 1330 mm - Adjustable air flow - Pneumatic spray gun - Illuminated cabin - Ventilation Please note: The washer is delivered as a self-assembly kit. Price does not apply to machines purchased in Poland.

Kondisi: siap digunakan (bekas), Alle Teile aus Edelstahl gefertigt. Mit Beschickungstrichter und Abnahmeschnecke. Das dazugehörige Förderband, das das Produkt zuführt, steht ebenfalls zum Verkauf. Godpfx Aswxpxtedqeuh

Kondisi: baik (bekas), Funciona correctamente, tenemos cuatro de ellos. Gujdpfeum Ivkex Adqeh