Beli Mikron Vce 750 bekas (191)

Kondisi: baik (bekas), Tahun pembuatan: 1996, Die auf den Bildern von Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Die Maschine verfügt über zwei Spindeln: - Eine Spindel: 6.300 min⁻¹, SK 40 - Zweite Spindel: bis zu 42.000 min⁻¹, HSK E40 Kdsdpfsruauqex Adqju Die Spindel wurde 2018 erneuert.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, jam operasional: 6.191 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 7158, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 46, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 positions Tool holder: ISO B40 Travels X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilt table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible transport load (with clamped tilt axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible transport load (5-axis operation): 5,000 N Maximum speed of rotary axis: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Kodpfxsw Hq Ifs Adqjdu Spindle hours: 6,191 h Power-on hours: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D measuring probe Note: The tool holders shown in the pictures are included in the scope of sale and delivery; however, the tools clamped in the holders, such as drills, reamers, cutters, etc., are not included in the sale or delivery. The drive unit for the tilting axis of the head is missing.

Kondisi: bekas, Tahun pembuatan: 1997, Technical details: Kdodpfx Asvb Hzrsdqou X travel: 710 mm Y travel: 630 mm Z travel: 500 mm Spindle speed range: 5 – 5,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, all axes with box ways, guides protected by wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Heidenhain iTNC 530, area kerja X 600 x Y 450 x Z 450 mm, dudukan spindle CAT40, penukar alat otomatis 24 posisi, spindle 20.000 rpm, berat mesin 6.100 kg, daya masuk 16 kW, sekering utama 32 A, tegangan operasi 400 V, 50/60 Hz Kedpfxow Hxzmo Adqjdu

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 240 mm, panjang umpan sumbu Z: 350 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 40 m/menit, laju pemakanan sumbu Z: 40 m/menit, kecepatan spindel (maks.): 30.000 rpm, de Kjdpfx Adew H Izpsqedu

Kondisi: siap digunakan (bekas), Tersedia lima mesin milling ulir Mikron model lama: 3x mesin frais ulir hidrolik Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 dan 1x mesin frais ulir pendek Mikron 106.01. Pemeriksaan di lokasi dimungkinkan. Kdjdpfx Aow Sxyxedqeu

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.37.00.616, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 450 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Heidenhain, model controller: iTNC 530, diameter meja putar: 450 mm, kecepatan rotasi (min.): 140 rpm, berat keseluruhan: 7.700 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 20.000 rpm, jam operasional spindle: 3.000 h, pasokan pendingin: 70 batang, daya motor spindle: 3.700 W, hidung spindel: HSK63, jumlah spindel: 1, jumlah slot dalam magazin alat: 120, panjang alat: 270 mm, diameter alat: 80 mm, berat alat: 6 g, jenis arus masuk: tiga fasa, Perlengkapan: konveyor serpihan, DE101 Kdodpfx Adow S Nf Eoqou

Kondisi: belum diuji (bekas), Tahun pembuatan: 2001, jam operasional: 3.260 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 730, jarak pergerakan sumbu X: 1.350 mm, jarak lintasan sumbu Y: 1.150 mm, jarak gerak sumbu Z: 685 mm, berat benda kerja (maks.): 1.500 kg, kecepatan spindel (maks.): 12.000 rpm, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Travel distances Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Working spindle: 0 – 12,000 rpm Kdjdpfx Asw Hq Aijdqju Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool data Tool magazine: 46-position automatic changer Number of magazine slots: 46 Max. tool diameter (fully loaded): 80 mm Max. tool diameter (partially loaded): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine capacity: 200 kg Chip-to-chip time: 9–12 sec H/H Feeds and rapid traverse Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° – -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine operating hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Required floor space (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will presumably be carried out on a truck with a 3,000 mm loading width.

Kondisi: baik (bekas), MIKRON - A 21 / 2 Gear Hobbing Machine - Complete technical specifications: see photos - Change gears included - Mitutoyo magnifier - Original operating manual – COMPLETE - Numerous spare parts - Very well-maintained overall condition Dimensions: Ksdpfjw D Dbyox Adqodu LxWxH 1.2x1x1.6 meters / Weight 1000 kg Errors and omissions excepted

Tahun pembuatan: 1990, Kondisi: bekas, x-travel 450 mm y-travel 400 mm z-travel 400 mm SK40 head Kjdpfxjpxrknj Adqodu Heidenhain 355 control Coolant system Total power requirement 4 kW Machine weight approx. 2.4 t Space requirement approx. ... m

Kondisi: baik (bekas), Tahun pembuatan: 1996, jarak pergerakan sumbu X: 710 mm, jarak lintasan sumbu Y: 630 mm, jarak gerak sumbu Z: 500 mm, kecepatan spindel (min.): 5 rpm, kecepatan spindel (maks.): 5.000 rpm, For sale: Mikron UMS 710-900 Machining Centre The machine is in good condition. New ball screws on X and Y axes, new Z-axis cover, and new Z-axis chip spiral. Technical Specifications: X-travel: 710 mm Y-travel: 630 mm Z-travel: 500 mm CNC controller: HEIDENHAIN TNC 355 Table size: 1200 x 600 mm Maximum table load: 500 kg Spindle taper: SK 40 with ring groove Spindle speed range: 5 - 5000 rpm Drive power – milling spindle: 11 kW Feed rate range: 0 - 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total power consumption: 15 kW Machine weight approx.: 5.0 t Kdjdpfott Acgox Adqju Space requirements approx.: 2.40 x 3.40 x 2.30 m Chip tray No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids available on request. Upon request and for an additional charge, loading and transport can be organised throughout Europe. Prices plus VAT. Inspection available by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Looking for a high-quality yet affordable metalworking machine for your production? Or looking to sell yours? For further information or to contact us:

Kondisi: siap digunakan (bekas), Control: HEIDENHAIN TNC 150. Kdodogtiaaopfx Adqeu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Heidenhain TNC 407 SK 40 air/water cooling Tool changer with 22 positions Travel paths 600x500x450 mm Kdedpsgydn Ijfx Adqju Spindle speeds 5–5000 rpm Feed rate 0–10000 mm/min Main spindle drive power 6 kW

Kondisi: baik (bekas), Tahun pembuatan: 1995, Die Maschine ist in gutem Betriebszustand. Steuerungseinheit: TNC 426 Kdodpfx Ajuzimnjdqeu

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: X-axis travel: 600 mm Y-axis travel: 500 mm Kdodpfxew D Hhpo Adqju Z-axis travel: 450 mm Machine weight approx.: 3.5 t

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.44.00.072, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 20 m/menit, berat benda kerja (maks.): 500 kg, lebar meja: 600 mm, panjang meja: 600 mm, beban meja: 500 kg, berat keseluruhan: 9.900 kg, kecepatan spindel (maks.): 20.000 rpm, jumlah slot dalam magazin alat: 30, Perlengkapan: dokumentasi / manual, konveyor serpihan, Mikron UCP 800 Duro – 5-Axis CNC Machining Centre Kdjdjwww Rhopfx Adqou We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro, manufactured by the renowned Swiss company GF Machining Solutions. This machine is ideal for machining complex parts, moulds, dies, and components requiring the highest accuracy and surface quality.

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Kdedpet Hw D Rsfx Adqju Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: siap digunakan (bekas), Speed: 3,150 rpm, Travel X/Y/Z: 710 mm / 500 mm / 500 mm, Number of spindle speeds: 21, Feed rate: 2,000 mm/min, Spindle taper: ISO40 / M16, Distance spindle head to table: 559 mm, Table dimensions X/Y: 500 mm / 1,000 mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Machine dimensions X/Y/Z: approx. 2,700 mm / 2,300 mm / 2,200 mm, Weight: approx. 3,300 kg, Control: Heidenhain TNC 155. Documentation available. Kdedpfx Adjtuwk Ujqju

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, For sale: Mikron UM 600 Machining Centre Kodpowx Naqjfx Adqedu The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No automatic tool changer installed; instead, the machine is equipped with a mounting arm for the conversion of the milling head (see image 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organised across Europe for an additional charge if requested. Prices are subject to VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchasing and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, Tahun pembuatan: 1986, jam operasional: 66.247 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, Mesin dalam kondisi baik dan masih beroperasi. Tahun pembuatan: 1986 Pergerakan: X 600 / Y/Z 500 Waktu menyala: 66.247 jam Kodpswccfhofx Adqodu Catatan: - Harga TIDAK termasuk aksesori! - Pengambilan oleh pembeli, dari lokasi. - Tanggal pengambilan ditentukan sesuai kesepakatan dengan penjual. - Tanpa garansi - Pembayaran di muka (faktur) atau tunai saat pengambilan

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Kdsdpfx Aeu U Sabodqou Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Condition: Very good! Only used in toolmaking. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 710mm/500mm/460mm, table dimensions X/Y: 1000mm/500mm, max. table load: 500kg, tool holder: SK40, spindle speed: 4000rpm, machine dimensions X/Y/Z: approx. 2000mm/2600mm/2250mm, weight: approx. 3400kg, control: Heidenhain TNC 355, operating hours: approx. 34,000h. Includes coolant system, full work area enclosure, approx. 34 SK40 tool holders, slides and shafts for gear hobbing. Documentation available. On-site inspection possible. Kedpfov Sct Sox Adqjdu

Kondisi: bekas, Tahun pembuatan: 1992, Wheel diameter – max. 150 mm Wheel width: 300 mm Module – max.: 4.5 Module – min.: [not specified] Total power requirement: 20 kW Machine weight: approx. 6 t Floor space required: [not specified] CNC-controlled horizontal gear hobbing machine with workpiece portal loading system, Type A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter for automatic loading, max.: 150 mm Kdodot Hwxbopfx Adqeu Workpiece diameter for manual loading, max.: 200 mm Maximum workpiece length: approx. 400 mm Axial hobbing length (Z-axis): 300 mm Module range HSS/Carbide cutters: 3 / 4.5 mm Number of teeth, min./max.: 2-999 Distance between tool and workpiece, min./max.: 0 - 190 mm Maximum workpiece spindle speed: 0-350 rpm Swivel range of milling slide left/right: 50° / 60° Cutter size (diameter x length): 102 x 230 mm Cutter displacement max. (Y-axis): 100 mm Radial slide travel max. (X-axis): 10-150 mm Tailstock travel max. (W-axis): 420 mm Cutter speeds stepless: 0 - 1,500 rpm Feed rates all axes steplessly adjustable: 3.5 or 4 m/min Spindle drive approx.: 8.8 kW Total drive approx.: 20 kW - 220 V/400 V / 50 Hz Weight approx.: 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788 (BWO) with monitor for up to 8 axes (ABC and WYZ and WV) with conversational programming for the creation of various gearing cycles, such as helical gearing, worm and worm gear cutting, crowned gearing, with and without shifting, as well as further sub-programs. Heavy-duty shifting milling head with high cutter speeds and a long shifting travel, suitable for 2 cutters, with quick-change system and hydraulic counter bearing. Workpiece spindle head (C) with quick-change system (collet chuck). Heavy-duty tailstock with travel 420 mm (W), in combination with an automatic workpiece loading unit, make GÜDEL-Switzerland, with linear portal loader, approx. 1000 mm stroke (V), double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5), but without workpiece storage system. Separate coolant unit with magnetic chip conveyor. Comprehensive full enclosure with sliding doors. 2 machines with workpiece marking unit, make BORRIES, unfortunately no other accessories.

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 560mm/500mm/400mm, spindle speed: 5000 rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8 m/min, rapid traverse: 10 m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29,647h. The central lubrication system has issues. Documentation is available. On-site inspection is possible. Kjdpfxsw H At He Adqsdu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, Weight: approx. 4600kg, Control: Heidenhain TNC 426. Includes internal coolant supply (IKZ) and external cooling. Documentation available. On-site inspection possible. Kdsdpfx Adsw Exr Ajqeu