Beli Mikron Wf 31 C bekas (181)

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Ncjdpfxjt Hw D Rs Abvsp Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.

Kondisi: bekas, Tahun pembuatan: 1997, Technical details: X travel: 710 mm Y travel: 630 mm Z travel: 500 mm Spindle speed range: 5 – 5,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Ncjdpfx Abjvb Hzrjvep Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, all axes with box ways, guides protected by wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power. Ncjdot I T N Ejpfx Abvop Part setup is not an issue. Comes with MITSUBISHI AACPU-S1 control system - year of manufacture: 1996 - Detailed technical data as per attachment - The machine can be inspected cutting/chip-on. Conversion – INSTALLATION – Setup – Application can be offered. Price ex location, unpacked, uninsured. Delivery time: immediate – subject to prior sale. Technical data is non-binding – subject to change and errors. Payment: As customary for used machines, strictly net before removal.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: KU 4165M, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 572 mm, jarak lintasan sumbu Y: 322 mm, jarak gerak sumbu Z: 265 mm, jumlah slot dalam magazin alat: 22, kecepatan rotasi (maks.): 15.000 rpm, The value of the supplied spare parts is approx. €70,000 TECHNICAL DETAILS Loading modules: 1 module Machining modules: 3 modules Number of spindles: 6 Control System: Bosch Rexroth MTX Part program size: unlimited Remote diagnostics: available Programming: ISO code, simulation via CAM software EdgeCAM Workpiece transport and loading system Loading system: parallel to main time, manual, with 3-axis handling or robot Part feed: paternoster / stack magazine Workpiece changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Ncedpfx Asxamh Eobvjp Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed force X: 1,100 N Feed force Y1/Y2: 1,100 N Feed force Z: 2,500 N Rotational speed B-axis: 1,000 rpm Rotational speed C-axis: 500 rpm Acceleration B-axis: 52 rad/s² Acceleration C-axis: 90 rad/s² Torque B-axis (clamped): 1,000 Nm Torque B-axis (unclamped): 287 Nm Torque C-axis (clamped): 300 Nm Torque C-axis (unclamped): 187 Nm Working spindle Tool interface: HSK 40-A External diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece clamping Clamping system: EROWA clamping system Actuation: pneumatic, 6 bar Tool changer Tool discs: externally pre-loadable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions each) per machining module: 22 Tool disc weight: 5 kg Max. tool weight: 2.5 kg Max. free tool length: 186 mm Max. tool diameter: 63 mm Max. tool diameter with free position: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. total weight of tools on disc: 15 kg Positioning time per tool increment: 250 ms Tool holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 110 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 150 mm, panjang benda kerja (maks.): 40 mm, lebar benda kerja (maks.): 80 mm, The rotary indexing machine is comprehensively equipped; the machine’s original price is approximately €3,000,000. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Nsdjwy I Tlopfx Abvocp Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeat accuracy of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tube, extraction system, and tube Loading systems Vibrators Cabinets / side elements / upper channel / cabinet upper parts Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Kondisi: bekas, ACCESSORIES Njdpfsuhbqpox Abvocp - With Zellio SR3 automatic feeder - Tilting loading magazine No. 11 and vibrator - Piece diameter 2.50 to 12.5 [mm] - Piece length 0.30 to 30 [mm]