Beli Okuma Mu 400 Va bekas (224)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 126937, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 460 mm, jumlah slot dalam magazin alat: 32, produsen pengendali: Okuma, model controller: P200M-H, diameter meja putar: 400 mm, OKUMA MU-400VA CNC Vertikal-Bearbeitungszentrum (5-Achsen), aus Luft- und Raumfahrtindustrie, 16" Rundtisch, 4. und 5. Achse im Schwenktisch integriert, 15.000 U/min, 32-fach Werkzeugwechsler, OSP P200M-H CNC-Steuerung Okuma MU-400VA CNC Vertikal-Bearbeitungszentrum (Baujahr 2007) Ausstattung: - Steuerung: OSP P200 - Aufspanntisch-Durchmesser: 400 mm (15,75") - Maximale Tischbelastung: 300 kg (660 lbs) - X-Achse (Längsverfahrweg): 762 mm (30") - Y-Achse (Querweg): 460 mm (18,11") - Z-Achse (Vertikalweg): 460 mm (18,11") - A-Achse (Trunnion-Schwenkbereich): +20° bis -110° (±25°) - B-Achse (Rundtischrotation): 360.000° Isdeu Illaepfx Akpjth - Abstand Tischoberfläche bis Spindelnase: 100–560 mm (3,94"–22,05") - Boden bis Tischoberfläche: 1.050 mm (41,34") - Eilganggeschwindigkeit (X/Y/Z): 40 m/min (1.574 IPM) - Spindelleistung: 15 kW (20 PS) - Max. Spindeldrehzahl: 15.000 U/min - Spindelaufnahme: MAS BT40 Big Plus - Innenkühlung (Coolant through spindle): ja - Werkzeugmagazin: 32 Plätze - Elektrischer Anschluss: 220 V / 3 Ph / 60 Hz - Maschinenabmessungen (ca.): 2.900 x 4.000 mm (114" x 160") - Maschinenhöhe (ca.): 2.950 mm (116") - Maschinengewicht (ca.): 7.700 kg (17.000 lbs) Ausstattungsdetails: - OKUMA OSP P200M-H CNC-Steuerung - Integrierter 4. und 5. Achse, 400 mm (16") Schwenktisch - Spindel mit 15.000 U/min - Laservermessung für Werkzeuge - 32-fach automatischer Werkzeugwechsler (ATC) - Innenkühlung (Through-Spindle Coolant) - Späneförderer

Kondisi: bekas, en-001 Iodpfx Aksy Er Hyspeth

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 710 mm, diameter pembubutan: 710 mm, daya motor spindle: 11.000 W, kecepatan spindel (min.): 38 rpm, kecepatan spindel (maks.): 3.800 rpm, jarak pergerakan sumbu X: 690 mm, jarak lintasan sumbu Y: 115 mm, jarak gerak sumbu Z: 1.545 mm, gerak cepat sumbu X: 4 m/menit, pergeseran cepat sumbu Y: 26 m/menit, pergerakan cepat sumbu Z: 40 m/menit, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: tiga fasa, hidung spindel: JIS A2-8, berat keseluruhan: 14.000 kg, panjang alat: 300 mm, berat alat: 10 g, jarak perjalanan sumbu W: 1.550 mm, Perlengkapan: dokumentasi / manual, de Itjdpfeyqx Rzex Akpeh

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.500 mm, diameter pembubutan: 710 mm, Okuma Multus B400W Bekas diameter pembubutan maks Ø 710 milimeter panjang pembubutan 1500 milimeter Itodpfx Aeyrf T Sjkpoh Robot Kuka 140 kg tanpa perangkat penanganan 2 spindle, 7 sumbu, sabuk pengumpan - stasiun pemuatan - stasiun pembongkaran - ayunan 950 milimeter Chuck 12+15" Pompa tekanan tinggi 70 bar

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Commissioning: as Okuma stock machine 09.2017 Control: OSP P300S Machine equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor power 32kW Torque 955Nm. ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustment range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1,500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-position tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: High-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum-type filter TMF300 with clean tank 980 l Itodpfxjyviigj Akpjh ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for lower turret) ▪ Automatic door system ▪ Robot Interface Type E for linking further loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical details ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller linear guides in ZB-axis With slideways in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with travel +150 / -150 = 300 mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20 bar pressure Including bag filter, external coolant supply for tool spindle, pump with max. 3 bar pressure ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measuring device (when using standard chuck) for safe setup ▪ MacMan machine management with integrated production data acquisition (PDA) ▪ Parts program memory 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation through periodic speed variation ▪ Tool height offset in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation +/- 0.1°

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Dear Sir or Madam, Here are the details of the Okuma Multus B400 with main and sub-spindle, HSK 63 tool magazine with 80 stations, 1500 mm turning length, main spindle bore 100 mm: CNC Turning and Milling Center with OKUMA OSP P200L CNC control - Enlarged main spindle Ø110 mm, Ø150/110 mm, spindle nose size 11 - Spindle speed range: 38-2800 rpm - Sub-spindle as W-axis incl. hollow clamping device with Ø70 mm bore in the draw tube - Screw interpolation for thread milling Itodpetdg Evsfx Akpoh - Tool height compensation in Y-axis for turning tools - Expansion kit "M" OSP P200L (Kit One-Touch IGF-M-D) - Multifunction tool software for special tool applications - 80-position tool changer instead of 20 - C-axis synchronization software for simultaneous control of both C-axes - Increased speed for driven tools: 10,000 rpm, 20/14 kW, max. 85 Nm - Interlit ISF 540/6670 hinge belt chip conveyor with integrated coolant tank - Interlit SPB4 gravity band filter with 900 L clean tank - Supply pump TH 90/690 FSI, frequency-controlled pump for gravity band filter SPB4 - Manual rinsing gun for attachment to SPB4 auxiliary coolant tank - SMW VNK 250/110 power chuck cylinder for hollow spindle with Ø110.5 mm bore, chuck Rota THW Plus 315-104 A11, cylinder SMW VNK 250/110 - Two-stage clamping pressure for power clamping device selectable via program - Multus B400 door automation: Open/close both doors simultaneously via M-code - Chuck Rota THW Plus 315-104 A8, cylinder SMW VNK 225/95 installed Year of manufacture: 2011 Commissioned: June 2011 Warranty: No warranty is provided for the used machine. However, HAF Präzisionstechnik assures that there are no known defects, including hidden defects. Unknown defects therefore cannot be ruled out. The machine is under power and in very good condition. Inspection is possible by appointment. We are also happy to process your initial parts in advance.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 32 m/menit, kecepatan pemakanan sumbu X: 32 m/menit, laju pemakanan gandar Y: 32 m/menit, laju pemakanan sumbu Z: 32 m/menit, produsen pengendali: Okuma, model controller: OSP P200M-H, diameter meja putar: 500 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Okuma MU500VA CNC Vertikal-Bearbeitungszentrum (2007) Ausgestattet mit OKUMA OSP P200M-H CNC-Steuerung 20" Drehteller 4. und 5. Achse integriert im Schwenk-Rundtisch 32-fach automatischer Werkzeugwechsler Ijdpfx Akeyf Ncqspoth Kühlmittelzufuhr durch die Spindel Werkzeuglängenmessung Verfahrwege X-Achse (Schlitten links/rechts) – 1.250 mm, Y-Achse (Palette vorne/hinten) – 660 mm, Z-Achse (Spindel hoch/runter) – 540 mm, A-Achse – +20~-110°, C-Achse – 360°, Tischoberfläche bis Spindelnase – 127~667 mm Tisch Tischdurchmesser – Ø500 mm, max. Werkstückgröße – Ø730 x H500 mm, Boden bis Tischoberkante – 1.073 mm, max. Tischbelastung – 500 kg Spindel Spindeldrehzahl – 15.000 1/min, Rundschaltteller (C-Achse) – 1.000 1/min, Anz. Spindelstufen – stufenlos, Kegelaufnahme – 7/24 Kegel Nr. 40, Lagerdurchmesser – Ø70 mm Vorschub Eilgang – X-Y: 40 m/min, Z: 32 m/min, Eilgang (A-C): 18.000 °/min, Schnittvorschub X-Y-Z: 32 m/min Antriebe Spindel (10 min/dauer) – 11/7,5 kW Werkzeugwechsler (ATC) Werkzeugaufnahme – MAS BT40 Big Plus, Zugbolzentyp – MAS 2, Werkzeugplätze – 32, max. Werkzeugdurchmesser (bei Nebenplätzen besetzt) – Ø90 mm, max. Werkzeugdurchmesser (bei Nebenplätzen frei) – Ø125 mm, max. Werkzeuglänge – 400 mm, max. Werkzeuggewicht – 8 kg, Werkzeugwahl – Speicherzufallsauswahl

Kondisi: baik (bekas), Tahun pembuatan: 2008, - Maximum turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m Ijdjxmirgepfx Akpeth EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full-stroke cylinder for partial hollow clamping, maximum draw tube bore Ø 100 mm - In-process measuring system Renishaw for X/Y/C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° - ICS / Internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° - Hobbing software for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 925 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 600 mm, beban meja: 600 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 26.000 W, jumlah sumbu: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features an impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking for high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining center we offer for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max. machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Distance between table and spindle: 60 – 660 mm • Rapid traverse (X/Y/Z): 50 m/min • Maximum feed rate: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X-Y-Z optical scales • Operating hours: Power on 25,683 h; Operation 10,364 h; Cutting 9,209 h • Included control/software options: 5-Axis Super-NURBS kit, tool centering programming, tool length compensation, DNC-DT interface, tool orientation command Ijdpey Dc Niofx Akpeth Additional Equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Washdown system • Pallet changer ready (preparation) • Industry 4.0 kit (registered until 2026) Technical Specification Taper Size BT 50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 1.450 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 600 mm, beban meja: 600 kg, kecepatan spindel (maks.): 8.000 rpm, daya motor spindle: 15.000 W, jumlah sumbu: 5, en Itjdpfxsyia Tls Akpeh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, OKUMA V-Turn LVT 400 Mesin Bubut CNC Vertikal (Sel dua mesin) Iedpfexwy S Eex Akpsth Model: LVT 400 Kontrol: OKUMA OSP 1000L Tahun: 2006 Menara alat 12 posisi Pendingin tekanan tinggi 60 Bar Konveyor serpihan Pengukuran benda kerja Sistem karusel terhubung kedua mesin dengan stasiun pembalik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1067, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 450 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, daya nominal (semu): 28 kVA, torsi: 80 Nm, produsen pengendali: Okuma, model controller: OSP-U100L, tinggi benda kerja (maks.): 500 mm, berat benda kerja (maks.): 700 kg, lebar meja: 560 mm, panjang meja: 1.300 mm, kecepatan spindel (min.): 40 rpm, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 15.000 h, pasokan pendingin: 20 batang, hidung spindel: BT-40, jumlah slot dalam magazin alat: 20, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Pusat pemesinan 3-sumbu dengan pendinginan internal melalui spindle, 15.000 rpm, pendinginan oli permanen pada spindle. Berbagai dudukan alat (collet, chuck bor, dudukan Weldon, dan dudukan kepala frais). 3 ragum Gressel-Gripos 125mm seperti baru, ditambah perangkat pengaturan alat PWB Toolmaster 250. Iedpfx Aksw S Nc Repeth

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 450 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Nama Mesin: Okuma Model Mesin: MX45VAE, Tahun Pembuatan 2000 Deskripsi: OSP 700M Kecepatan Spindel: 7000 rpm Taper BT40 Ukuran Meja: 1000 mm x 460 mm Pergerakan Sumbu X: 560 mm Iedpfx Aszair Uekpsth Pergerakan Sumbu Y: 460 mm Pergerakan Sumbu Z: 450 mm ATC 20 stasiun Renishaw tool setter Renishaw work probe Sistem pendingin dan konveyor Tersedia 2 mesin identik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 460 mm, tinggi total: 3.000 mm, lebar total: 3.270 mm, beban meja: 400 kg, berat keseluruhan: 8.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 22.000 W, jumlah slot dalam magazin alat: 32, berat alat: 8.000 g, panjang produk (maks.): 300 mm, jumlah sumbu: 3, This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, a Y-axis travel of 460 mm, and a Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking for high-quality machining capabilities, you should consider the Okuma ACE CENTER MF-46VA vertical machining center, which we are offering for sale. Contact us for further details. • Distance table to spindle nose: 180–640 mm • Rapid traverse (X/Y): 40 m/min • Rapid traverse (Z): 32 m/min • Maximum cutting feedrate: 32,000 mm/min • Positioning accuracy (X/Y/Z): ±0.004 mm (JIS) • Repeatability (X/Y/Z): ±0.0015 mm (JIS) • Pallet changer: 2 pallets, rotary automatic pallet changer • Pallet size: 760 × 460 mm Itsdoy Uxuiepfx Akpsh • T-slots for pallets: 3 × 18 mm, 125 mm spacing • Pallet change time: 6.0 s • Spindle speed: 15,000 rpm (upgrade from 8,000 rpm) • Spindle motor power: 22 / 18.5 kW • Maximum spindle torque: 199 Nm • Thermal compensation: TAS-S (spindle) and TAS-C (structure) • ATC capacity: 32 tools (upgrade from 20), random management • Tool change time (adjacent): 1.2 s • Maximum tool diameter: 90 mm (125 mm if adjacent pockets are empty) • Maximum tool length: 300 mm • CNC functions: Hi-2-NC with NURBS, Super-Hi-2-NC profile management, synchronized rigid tapping, angular cutting, spindle load monitoring, IGF plain-language programming, RS-232-C interface, 3.5" disk drive • 4th axis capability: prepared for 4th axis integration • Documentation: operator manuals and CE declaration of conformity included Additional Equipment • Tool breakage detection sensor (table-mounted) • Prepared for Renishaw workpiece zero-point probe (probe not included) • 'Coolant wash system for the work area in the form of a shower' • Belt-type oil skimmer at the coolant tank Technical Specification Taper Size BT 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 8.200 h, Fungsionalitas: berfungsi sepenuhnya, 1 Itsdpfx Ajy T Nhdekpjh

Kondisi: bekas, Tahun pembuatan: 2001, x-w-weg-560-mm Itedpfx Ajyi Hv Nokpoh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 126265, panjang pembubutan: 900 mm, diameter putar di atas sled silang: 450 mm, diameter pembubutan: 450 mm, daya motor spindle: 22 W, kecepatan spindel (min.): 38 rpm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 100 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 935 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 26 m/menit, pergerakan cepat sumbu Z: 40 m/menit, kecepatan rotasi (maks.): 6.000 rpm, panjang pemakanan sumbu X: 580 mm, panjang umpan sumbu Y: 160 mm, panjang umpan sumbu Z: 935 mm, saluran batang: 72 mm, tinggi total: 2.600 mm, panjang total: 4.945 mm, lebar total: 2.690 mm, hidung spindel: A2-6, diameter ayun di atas peluncur melintang: 630 mm, berat keseluruhan: 10.300 kg, diameter spindel: 100 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin dalam kondisi kerja sangat baik dan dapat diperiksa saat menyala. Sistem kontrol OSP-P200L. Taper spindle pada spindle hidup HSKA63, sub spindle 15 kW, sumbu B, majalah alat dengan 40 slot, sekitar 60 dudukan alat HSK 63. Setengah palet dengan rahang keras dan lunak, collet disertakan. Itjdsza U Ubjpfx Akpeh

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, vl-001 Isdpfxjy Tuu Aj Akpeth

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 10.500 h, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 630 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 935 mm, model controller: Okuma OSP P200L, TECHNICAL DETAILS Swing diameter over slide: 630 mm Max. machining diameter: 630 mm Distance between centers: 900 mm Travel X-axis: 580 mm Travel Y-axis: 160 mm Travel Z-axis: 935 mm Travel W-axis: 1,000 mm Travel C-axis: 360° Travel B-axis: -30° to 195° Main spindle speed: 3,800 rpm Counter spindle speed: 5,000 rpm Milling spindle speed: 6,000 rpm Rapid traverse X-axis: 40,000 mm/min Rapid traverse Z-axis: 40,000 mm/min Rapid traverse Y-axis: 26,000 mm/min Rapid traverse W-axis: 20,000 mm/min Rapid traverse C-axis: 200 rpm Rapid traverse B-axis: 30 rpm Itodpfoy S Swxsx Akpeh Max. tool diameter: 90 mm Max. tool diameter (without adjacent tools): 130 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Number of axes: 6 Control: Okuma OSP P200L Dimensions & Weight Setup area: 4,340 × 2,050 mm Height: 2,600 mm Weight: 10,300 kg Spindle hours: 10,500 h EQUIPMENT Documentation/Manual Infinitely variable speed control Marpos tool sensor Chip conveyor & coolant system with small belt filter unit ATC 60 system HSKA-63 (60 tools)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 9.675 h, Fungsionalitas: berfungsi sepenuhnya, model controller: U100M, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 32, jumlah sumbu: 3, Ein Werkzeugpaket im Wert von 10.000 € kann für 3.500 € optional dazu gekauft werden! TECHNISCHE DETAILS Verfahrweg X-Achse: 1.050 mm Verfahrweg Y-Achse: 560 mm Verfahrweg Z-Achse: 460 mm Hauptspindel: 12.000 U/min MASCHINEN-DETAILS Steuerung: U100M Achsen: 3 Werkzeugwechsler (ATC): 32 SK40 Schnittzeit: 9.675 h AUSSTATTUNG Dokumentation/Handbuch Itedpfoy S S Nnox Akpoh Drehzahl stufenlos einstellbar Späneförderer Kühlmittelanlage Vorbereitung A-Achse (4. Achse)

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 20.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 625 mm, daya nominal (semu): 49 kVA, produsen pengendali: Okuma, model controller: OSP-P200M, lebar meja: 400 mm, panjang meja: 400 mm, beban meja: 400 kg, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 58.000 h, pasokan pendingin: 30 batang, daya motor spindle: 22.000 W, hidung spindel: SK40 Big Plus, jumlah spindel: 1, jumlah slot dalam magazin alat: 100, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, pengganti palet: otomatis, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, 1 Ijdoyvga Ujpfx Akpsth

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), X-AXIS TRAVEL: 762 MM Y-AXIS TRAVEL: 560 MM Z-AXIS TRAVEL: 460 MM SPINDLE SPEED: 15,000 RPM SPINDLE TAPER: BT 40 TABLE SIZE: 460 X 760 MM MAXIMUM LOAD: 400 KG RAPID TRAVERSE X/Y AXIS: 40,000 MM/MIN RAPID TRAVERSE Z AXIS: 32,000 MM/MIN FEED RATE IN OPERATION: 32,000 MM/MIN Itodpfxepyg Rko Akpoh TOOL MAGAZINE CAPACITY: 20 POSITIONS TOOL CHANGE TIME: 1.2 SEC – 3.8 SEC MAXIMUM TOOL WEIGHT: 8 KG MAXIMUM TOOL LENGTH: 300 MM CONTROL UNIT: OSP - P200M

Kondisi: bekas, Tahun pembuatan: 2005, CNC Horizontal Machining Center OKUMA MA-400H (2005) Condition: Good, currently connected and can be seen in operation. Manufacturer: OKUMA Corporation (Japan) Model: MA-400H Year of manufacture: 2005 Equipment: Supplied with Tsubakimoto / Mayfran Inc. chip conveyor and complete installation system. High-class CNC horizontal machining center, designed for precise metal part milling, drilling, and tapping. An excellent choice for serial production where performance, accuracy, and reliability are required. Main technical specifications: (based on OKUMA MA-400H model specification) Control system: OKUMA OSP-E100H Travel (X / Y / Z): 560 × 560 × 625 mm Table: 400 × 400 mm (dual-pallet changer) Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Max. table load: 400 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Spindle motor: 15/11 kW Tool changer: 60 positions (automatic) Chip conveyor: Tsubakimoto / Mayfran Inc. – integrated Coolant system: integrated Approximate weight: 11,000 kg Application: The OKUMA MA-400H is designed for medium- and high-precision parts machining in the automotive, mold and die, tooling, machinery, and metalworking industries. Ideally suited for versatile machining tasks – with automatic pallet changer, it allows for unattended operation. Itodpfx Ajxql Daokpsh If you have any further questions, we would be happy to answer them.

Kondisi: bekas, Tahun pembuatan: 2005, For sale: CNC machining center OKUMA ACE CENTER MD-56VA (Year 2005) Condition: Good, fully functional. Manufacturer: OKUMA Corporation (Japan) Model: ACE CENTER MD-56VA Year of manufacture: 2005 Reliable vertical CNC machining center designed for precise metal milling, drilling, and tapping operations. OKUMA is one of the most renowned Japanese manufacturers, noted for machine tool accuracy and durability. Isdpfsxp Utbox Akpjth Key technical data: (based on MD-56VA model specifications) Control: OKUMA OSP-E100M Travel range: X = 1050 mm / Y = 560 mm / Z = 460 mm Table size: 1300 × 560 mm Max. table load: 800 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15/11 kW (continuous/nominal power) Power supply: 400 V / 50 Hz Cooling system: integrated Approximate weight: 7,000 kg Application: The OKUMA MD-56VA CNC machining center is intended for high-precision metal component production, including: - Mechanical components - Molds and tools - Machining of aluminum, steel, or non-ferrous metals Ideal for precision manufacturing, small and medium series production where accuracy and repeatability are essential. If you have further questions, please feel free to contact us.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 162881, diameter putar di atas sled silang: 410 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 340 mm, lubang spindel: 80 mm, kecepatan rotasi (maks.): 3.800 rpm, TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over cross slide/saddle: 410 mm Distance between centers: 1,000 mm Maximum turning diameter: 340 mm Maximum machining length: 1,000 mm Travel X-axis (XA): 260 mm Travel Z-axis (ZA): 1,016 mm Travel X-axis (XB): 139 mm Travel Z-axis (ZB): 965 mm C-axis: 360° Control unit: Okuma OSP-P200LA Spindle speed: 38–3,800 rpm Speed ranges: stepless, automatic range selection Spindle nose: Option A2-8 Big Bore Spindle bore: 80 mm Main drive motor: 22.37 kW Torque: 412.17 Nm Upper multitasking turret: V-12 NC turret Lower turret: V8 (VDI) Indexing time without lifting: 0.18 s Driven tool speed: 45 – 4,500 rpm Motor for driven tools: 7.08 kW Rapid traverse X/Z: 333.16 / 416.56 mm/s Itsdpfx Aksy U T Dlspoh Rapid traverse C axis: 3.333 rev/s Tailstock quill diameter: 90 mm Tailstock quill taper: MT #5 Tailstock quill stroke: 120 mm MACHINE DETAILS Machine weight: 8,800 kg Supply voltage: 220/480 V Phases: 3-phase Frequency: 60 Hz Rated apparent power: 31 kVA Full load current: 81.7/37.5 A Maximum motor nominal current: 96 A Short circuit rated values: 30/10 kA