Beli Oven Untuk Lapisan Bubuk bekas (26.198)

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Cedpfjfz A Iwjx Aa Topw Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Touch to Delete ROMER cabins are equipped with 4-inch color touchscreen controls. Cab operation is intuitive and available in three modes: automatic (temporary), automatic (via a plug-in filter sensor), or manual. Filter Plug Sensor The cabins are fitted with a sensor that monitors filter clogging and indicates when they need to be cleaned. The system also notifies the user when filters have been used. Automatic Filter Cleaning The electronic automatic filter cleaning system manages the cleaning intervals and activation times. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on operators to clean the filters. Thanks to this system, the operator does not need to remember or stop for cleaning. Cpjdpfxefzciqe Aa Tew Low Noise Level Aluminum fans operate very quietly, producing only 74-79 dB, which is not excessive. Even with the standard cabin design, it is difficult to carry on a conversation near the units. Exhaust through the cabin. The cabin’s overhead squirrel cage fans improve workflow by eliminating the need for manual push systems, preventing operators from being distracted. Explosion Protection The cabin is designed to prevent explosive mixtures from accumulating during the painting process. All components have been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Cjdpfx Aofz Nb Toa Topw Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Cpjdpfx Aasfz U S Ee Tew Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Cedpfx Asfz U Tija Topw Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Kondisi: baru, Tahun pembuatan: 2025, Powder Coating Set Powder Coating Oven: 1200 x 3000 x 1800 mm Powder Coating Booth: 2800 x 2200 mm Oven / Dryer Technical Specifications: Working dimensions: 1200 x 3000 x 1800 mm Power consumption: 33 kW Maximum operating temperature: 230°C Equipment: - Internal trolley - External trolley - Hot air circulation (ensures even temperature distribution throughout the oven) - Safety latches for safe opening and closing Powder Coating Booth Working dimensions: 2800 x 2200 mm Fan power: 2.2 kW Fan air flow rate: 10,500 m³/h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. Cpodpfxeg Uw Dkj Aa Tjw Very high quality of machines offered on the market. Professional consulting and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. brand products are CE certified. We offer our own transport – prices are agreed individually for each order. We issue invoices with VAT indicated. Short lead times! Option to order machines in various, customized configurations and dimensions! Please don’t hesitate to contact us.

Kondisi: sangat baik (bekas), GEA OptiAir Staubabsauganlage. Baujahr 2015, die Maschine befindet sich in gutem Zustand. Passende GEA OptiFlour II 600 Einheiten zur Kombination mit dieser Anlage haben wir auf Lager. Codpov Ig Rmsfx Aa Topw

Kondisi: baik (bekas), Marel Townsend Stork rotierendes Panieraggregat in sehr gutem Zustand. Cedpfxemqk Tws Aa Tepw

Kondisi: sangat baik (bekas), GEA OPF600 OptiFlour Vorschäler. Stammt aus einer 600 mm Beschichtungsanlage einer fleischfreien Produktion. Alle weiteren notwendigen Maschinen für eine vollständige Linie sind ebenfalls verfügbar. Cpsdpfx Aaov Ihnys Tow

Kondisi: baik (bekas), UV curing oven for production line Cpodpfx Aajt Ag Uqe Tew

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3200 0088, berat keseluruhan: 2.000 kg, panjang total: 7.300 mm, lebar total: 1.100 mm, tinggi total: 2.000 mm, tegangan masuk: 400 V, arus masuk: 125 A, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, kapasitas pendinginan: 30 kW (40,79 hp), kecepatan operasi: 83 mm/dtk, Manufacturer IBT.lnfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: as-new; little used in trial series Functionality: fully operational Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection (site-provided): 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Continuous oven for curing in film lamination technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Total height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Frame constructed from stainless steel profile tube, height-adjustable: ± 30 mm Conveying System Vacuum conveyor belt made of silicone, belt width 310 mm Conveying speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area at belt infeed: approx. 750 mm Free area at belt outfeed: approx. 750 mm Conveyor Belt Operation: Continuous operation, adjustable up to max. 5 m/min, straight run adjustment centered by guide rollers with photoelectric monitoring at both infeed and outfeed sides. Loading and unloading is manual. Intended Use The curing oven is a conveyor system for continuous operation with a maximum feeder speed of 5 m/min. There is an open area at the infeed and outfeed for loading and unloading components. Between these zones is the enclosed heating section with 6 IR modules (height adjustable). The component temperature reaches up to 100°C, used for heating solvent-free adhesives within a film composite. The return path of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are drawn onto the conveyor belt via vacuum. The control cabinet is located outside the cleanroom, separate from the machine. The system operates in a cleanroom compliant with EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is exclusively for heating film laminates. Csdpfx Aswnm Ukja Tepw Equipment - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature monitoring - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in subframe (G1”) - Water cooling for the belt return and rear sides of the IR modules - Mechanically interlocked service doors - Operating panel mounted on the left side of the infeed - Control cabinet cooling unit, water connection provided by site History This oven was intended for use in a cleanroom environment and was only used sparingly for test series. The oven was used for curing solvent-free adhesives within a film composite.

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic capsule filling machine for powder or pellets in capsules of size 000 - 5. In addition to the main unit, various add-on modules and machines enable a fully automated filling process. Included: material hopper, capsule hopper, vacuum conveyor, capsule feeding system, industrial dust separator, capsule polisher, metal detector, collection container (finished product). – Specifications: Suitable for capsule size: 000 – 5; segment bore: 25; max. machine cycle rate in idle: 140 cycles/minute (corresponds to an output of up to 3500 capsules/minute); main machine dimensions: L1555xW1165xH2040mm; main machine weight: 2200kg. Cpsdpfxev Nlc Ro Aa Tsw Please note that our new prices are often lower than typical used equipment prices. Feel free to make an inquiry and let us know your packaging requirements. – We generally have 30-50 different new machines available from stock for immediate delivery. For machines requiring custom manufacturing, we offer very short lead times from approximately 3 weeks. – All machines are supplied with full warranty.

Kondisi: baru, Tahun pembuatan: 2025, en Codpfx Aswf Dpgsa Tepw

Kondisi: baru, The perfect coating for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. Csdpfsun Sd Uox Aa Topw To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is essential for the powder to bond effectively with the substrate and to achieve a robust, long-lasting finish. Components of a Powder Coating System A powder coating plant typically consists of various components and equipment required for the application and curing of powder coatings. Spray Booth and Application Area The booth provides a clean environment for the application process and ensures even distribution of the powder. Powder Coating Gun A powder coating gun is used to apply the powder coating material to the workpiece. Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to convey the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before powder coating application. This includes processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimum adhesion and coating durability. Curing Oven A curing oven is an essential part of a powder coating system. It is used to heat the coated substrate to the proper temperature, allowing the powder coating to melt, flow, and harden into a durable surface. The oven typically features a conveyor system or racks to transport coated parts through the oven chamber. Extraction System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents powder particle accumulation in the air. Looking for a powder coating solution? Are you searching for a tailored powder coating system? We specialize in delivering custom powder coating solutions tailored to your specific requirements. Whether you have particular color specifications, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. Contact us today to discuss your requirements and let us design a bespoke powder coating solution for you. Get in touch with us today!

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas),

Tahun pembuatan: 2007, Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Lebar kerja: 650 mm, tinggi efektif: 220 mm, panjang area pemanas: 3250 mm. Oven ini memiliki 3 zona pemanas dan daya pemanas sebesar 125 kW. Oven sudah beberapa tahun tersimpan di dalam gudang dan banyak komponen yang perlu di-blasting serta dicat ulang. Selain itu, bagian dalam oven perlu dibangun ulang, dan sebagian komponen harus diproduksi baru... Atas permintaan, oven dapat kami rekondisi total sesuai standar teknologi terkini. Cpsdpjxdantofx Aa Tsw

Tahun pembuatan: 2016, jam operasional: 700 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 88-16-4043, Sigmet-2000V high vacuum coating machine Cpjdpfouz Rcwex Aa Tew The system coats even the most complex 3D-shaped metal, glass, or plastic parts with aluminum, producing an accurate, precise, and homogeneous surface with an outstanding visual appearance. Total operating hours: 700h Features: - Double-door design for high productivity - Precision drive system - Planetary drive for uniform coating - Vertical arrangement of substrate holders - Modular and flexible design - Glow pre-treatment by AC or DC - Glow pre-treatment by MF (40kHz) Typical applications - Automotive industry (interior/exterior) - Cosmetics - Household and furniture - Glass and bottles - General decoration - Lighting

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, - Oven GAS tipe box: Panjang: 400 cm, Lebar: 200 cm, Tinggi: 250 cm - Booth Powder Coating dengan Filter Cartridge: Panjang: 350 cm, Lebar: 150 cm, Tinggi: 200 cm - Peralatan Powder Coating Elektrostatis: Model Spray Gun: HMK MULTICOLOR, Jenis Penggunaan: Manual Pabrik Powder Coating Elektrostatis Cpedpfx Aajv I T Aij Tew Bagi yang berminat. Foto dan video lebih lengkap via email, info lebih lanjut melalui telepon.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, Due to the switch to Heuft thermal oil baking oven technology, we are offering a used Hein oven system consisting of: 5 StoneRoll 2 Ecostone² with baking technology 5 HEIN STONEROLL RING TUBE RACK OVENS TYPE: SR 106 3/8 3 baking trays 1000 x 600 mm per deck 8 decks = 24 baking trays Baking surface: 14.4 m² Usable height per deck: approx. 178.7 mm External dimensions: 1900 x 2500 x 3590 mm (W x D x H) Burner: Oil With rack drive Year of manufacture: 2012 Accessories: 15 racks with 8 supports each 2 stone plate trolleys 1 loading rack 1 unloading rack 1 cooling rack 2 HEIN ECOSTONE² ROTARY RACK OVENS TYPE: LR1-108-5-D ECOSTONE Rotating plate For trays 1000 x 600 mm Baking surface: 12 m² External dimensions: 1750 x 1680 x 2970 mm (W x D x H) Power supply as per manufacturer: 100 kW Burner: Oil Touchscreen computer control Cpedpfx Aaou Uubho Tow Year of manufacture: one oven 2019, one oven 2017 • The system will be loaded onto the buyer’s trucks. • Sale “as inspected,” without installation or warranty. • The ovens are connected and available for inspection at our location in St. Vith, Belgium, near the German border. If you have any questions or require further information, please feel free to contact us. All information is provided to the best of our knowledge and belief, however, without guarantee. Errors, prior sale, and technical modifications are reserved. The scope of accessories may deviate from the above listing.

Kondisi: bekas, Tahun pembuatan: 1983, 4 x complete spray booths with drying ovens for buses. Fully operational with all walls/constructions and engines/burners. Csdpfx Aewrpwvoa Tjpw

Kondisi: bekas, - Tipe oven: Cervap - No. seri: 17280 - Tahun: 04/04/1990 Cpodpfx Asw Eivfsa Tew - Dimensi pelat: 750x1860 mm - Permukaan pemanggangan: 5,5 m2 - Panel kontrol elektromekanis - 4 pintu pemuatan - Dengan loader/proofer elevator - Tegangan: 220V satu fasa + ground - Daya: 0,6 kW - Antarmuka elektromekanis - Semua oven Cervap dilengkapi dengan antarmuka ini sebagai standar - Indikator visual operasi oven - Regulator suhu - Timer pemanggangan - Sakelar On/Off - Injeksi uap - Kontrol pembukaan katup - Timer uap depan - Timer/jam mulai tertunda

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Der Aluminium-Alterungsofen ist der Ofen, in dem der Ausscheidungshärtungsprozess, d.h. der Alterungsprozess, der im Strangpressverfahren gezogenen Aluminiumprofile durchgeführt wird. Aluminium-Thermalisierungsofen härten die poröse Struktur des Aluminiums, indem die Profile innerhalb festgelegter Temperatur- und Zeitbereiche einem Alterungsprozess unterzogen werden. Als HAS MAKİNA PULVERBESCHICHTUNGSSYSTEME entwickeln und fertigen wir Ofenanlagen in verschiedenen Größen und Kapazitäten entsprechend der Nachfrage und dem Verwendungszweck, basierend auf den notwendigen ingenieurtechnischen Berechnungen für unsere geschätzten Kunden. Cedpfx Aaev Nkipj Tjpw Profil-Thermalisierungsofen, Aluminium-Thermalisierungsofen, Thermischer Ofen, Aluminium-Alterungsofen, Profil-Thermalisierungsofen,

Tahun pembuatan: 2002, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Maximum temperature: 700°C Opening (WxH): 1,500 x 30 mm Country of origin: Netherlands Electrical power: 14 kW Machine dimensions (LxWxH): 2,000 x 1,000 x 1,700 mm Machine weight: 1,500 kg Cpodpewi Ry Hefx Aa Tjw

Kondisi: sangat baik (bekas), J4 Tunnelofen aus dem Jahr 2012, demontiert und versandbereit. Für weitere Informationen senden Sie bitte eine E-Mail. Cedpfx Aaow Elyts Topw

Kondisi: hampir baru (bekas), Mondial Forni Stonefloor oven 120x150, bouwjaar 2016, slechts enkele keren gebruikt Cpodjwf Ix Sepfx Aa Tew